EBP_GET_BACKEND_PRICES and Valuation Type

Hi
Is there a way to run report EBP_GET_BACKEND_PRICES for Materials where Valuation Type = 'NEW' instead of all?
Thanks,
Nikhil

Hi All
We developed a custom program for EBP_GET_BACKEND_PRICES to satisfy our requirements.
Follow Up Question I have is how do you all scheduled the EBP_GET_BACKEND_PRICES in your system.
The original and custom program take a long time to finish due to the number of items in our system.
Any strategy or suggestion to schedule the program to improve performance?
We are using SRM 5.0 SP13.
Thanks,
Nikhil
Edited by: Nikhil on Jun 12, 2009 3:24 PM
Edited by: Nikhil on Jun 12, 2009 3:26 PM

Similar Messages

  • Fields in MIGO - BATCH and Valuation Type

    Hi all,
    I would like to know the meaning of the following fields in MIGO.
    BATCH - Charg
    Valuation Type - Bwtar
    Which is the impact of each field?
    Should they have the same value in TRA MIGO?
    Which means that only the BATCH field is entered and the Valuation Type empty?
    Thanks you very much!!

    valuation type  comes into the game If a material is subject to split valuation.
    you can for example split the valuation based on origin, e.g. internal produced and external procured.
    this is more a financial thing.
    the batch is the level to segragate the stock of a material. e.g. each GR can be a new batch. so you can manage the stock by FIFO rules and by shelf life.  this is a logistics thing.
    Both can be used on their own, or together.
    if you want manage your materials by batches, but dont need split valuation, then you only have to take care about batch number, and the valuation type field in the batch record stays empty.
    if you manage material by batch and you use split valuation, then the split valuation type is a mandatory field in the batch record and you may have to enter batch and valuation type, but usually the valution type is defaulted from customizing.
    The tricky part is if you only use split valuation, because then the valuation type becomes the batch number. this is sometimes a bit confusing.

  • Is there any table for relation between batch number and valuation type ?

    hi,
    I would like to know where i can find relation between batch number and valuation type ?
    thank you and Best regards
    Fernand

    Hello
    MCHA

  • Defaulting batch and valuation type for a specific division for tcode me21n

    Hi
    I would like to default the valuation type and batch for a specific division while creating the PO.
    Kindly let me know if there is any user exit for this.
    Thanks & Regards
    Bhagya

    Hi .
    Actually my requirement is while you are creating PO, the value say 'ABC' must be defaulted both in Batch and valuation type  but when change that to 'DEF' it should allow you.. means you should be able to modify the batch and valuation type fields. I can be kept empty also.
    I tried using field exit to default Batch and valuation type, but it does not work if the batch is empty.
    If I use the BADI you mentioned what are import and export parameters and how do I code to meet my requirement.
    Kindly let me know.
    I will definitely reward points if it works.
    Thanks in advance
    Bhagya

  • "Batch NO SALEAB. and valuation type 1ST CHOICE are not the same"

    Hi MM guru,
    Please help me with the error message - "Batch NO SALEAB. and valuation type 1ST CHOICE are not the same" encountered during MB1b transaction.
    Thanks in advance,
    Iram

    Hello Amuthan,
    I'm using mov type 311 and the material is not batch managed. I've entered the supplying & receiving batch and then error "Batch NO SALEAB. and valuation type 1ST CHOICE are not the same" was encountered, I found out that in table MCHA that the batch & valuation type for this material is not the same thats why its showing the error. Can you please guide me on how to maintain the data in table MCHA? What configuration we need to set?
    Thanks in advance,
    Iram

  • BATCH and VALUATION TYPE

    Dear All,
    Can anyone, please explain me clearly the difference between BATCH and VALUATION TYPE in MIGO and PO screen?
    What is the link between them ? pls explain in detail....
    Edited by: Raju on Nov 17, 2008 8:02 AM

    Hi,
    There's a link between both which is the indicator "Valuation type is set automatically". It can be set at the global or local (plant) valuation category.
    When you set this indicator, it means that each batch itself represents a valuation type (individual batch valuation). In other words, a valuation record is created automatically for each batch at Goods Receipt.
    -Edited-
    Example scenario:
    I activated batch management at plant level for material A and also activated split valuation. For this material, I produced the first batch (100pieces per batch) with certain characteristics. This batch is valuated at $100 per piece. I do a Goods Receipt against Production Order.
    Then my next production batch has better characteristics, so I wanted to valuate a piece slightly higher. With the indicator "Valuation type is set automatically", I can set a different price for this second batch during Goods Receipt from production (because a different valuation type is created for this).
    So I make use of batch management to manage my different sets of 100 pieces due to the slight different characteristics during each production run. I also make use of split valuation and the above indicator to valuate each batch separately.
    Hope this helps.
    Thanks
    Edited by: Han Lun Chan on Nov 17, 2008 9:59 AM

  • Report to show open orders and valuation type

    Hi,
    Is there a report in SAP that shows the open orders and the valuation type of the materials in those orders?
    thanks

    Hi jay,
    What is the definition of Open orders according to your company?
    Is it Sales orders created but not delivered?  or
    Is it Delivery created for the Sales order but not done PGI?  or
    Is it Sales orders but not billed?
    Accordingly you must decide.  Just VA05 will give list of orders where you can take from the Status updation whether it is delivered or not.  But apart from that, if you need any report relating to Open orders, you need to develop a Z report which will help your company.  Just ask your business user how he wants.  Based on that you can decide.
    Thanks and regards.
    Augustine Ponraj

  • Material master table for finding out valuation category and valuation type

    Hi,
    I have a material XYZ for which a valuation category 'H' is assigned. Now I need to create a valuation type for that.
    Question - I want to find out for the same plant & st location which are the other materials with valuation category H, and what are the valuation types used.
    I checked in mara, mard, mbew etc but of no use.
    Which table can i get the data ?

    hi,
    As the valuation details are saved and are based on the material, you can see the details of valuation type in MBEW table...and field as BWTAR
    For valuation catagory, you can see the table MARC...field as BWTTY...
    If want the valuation type details for both plant and storage location, you shd check the GR table ie. MSEG where you will get the valuation type ....
    hope its enough to retrieve the data..
    Regards
    Priyanka.P

  • WM: Batch and valuation Type

    Hi,
    Is it possible to maintain a material having batch number as wel as valuation type in warehouse.
    Can you guide us for relevant SAP documentation.
    Thanks in Advance
    Prashant

    You can have a material master with split valuation and batch management.
    In this case the valuation type is only a field in the batch master record.
    In WM stock oveviews and other document you will only see the batch number, not the valuation type.

  • MB52 batch and valuation type

    Dear All,
    I have a material for which valuation type and batch management is active. After goods receipt, when i check MB52, i can only see the batch number but no valuation type.  So is there any other report that i can see the stock for both valuation type and batch ?
    Thanks in advance..
    Best regards,

    there is no such report, you need to create a customized MB52 report
    Only if you would not have batch managment activated, then you could directly see the valuation type in MB52.
    Anyhow, have a look into MB5L report, it has the valuation  type, but may have other issues, if you execute it just for one material

  • How to check valuation type and batch during creating PO

    Hi All,
    can every body help me please,
    I have a material which manage by batch and valuation type.
    When user create purchase order using that kind of material I want the system checking field batch and valuation type. If they not match then system will give an error message.
    What should I do to make the system checking that fields?
    Thxs
    - ely -

    Hi Ely
    Fortunately, you do not need to do any coding or need to use exits.
    You can configure the screen layout settings as follows:
    1) SPRO->MM->Purchasing->Purchase Order-> Define screen layout at doc level
    2) Double click on the key-NBF (most probably you are using this for your PO document type. If you are using any other field layout key..make changes there)
    3) Double click on GR/IR control .
    4) Make Valuation Type & Batch fields 'Required'.
    System works intelligently here. If the material is batch managed, system expects you to enter a batch in PO. If the material has split valuation, then system also expects you to enter valuation type. FOr other materials, system does not expect you to enter batch or valuation type.
    Best regards
    Ramki

  • Default valuation type - PO and Delivery

    Hello,
    Is it possible to default valuation type for a particular combination of vendor and material when creating purchase order?
    Also can a particular valuation type be defaulted when creating
    outbound delivery depending upon storage location?
    Thanks,
    Pankaj

    Hi,
    Create Purchase Info Record (in ME11) for the combination of material, vendor, plant and Purchase org. and maintain the "Valuation Type" in the "Purchasing Data Screen". It will default the valuation Type from PIR to PO.
    For Outbound Delivery, use "Stock Determination Procedure"
    1. OSPX - Define Strategies for Stock Determination
    Here take a copy of Stock Determination group "0001" and create a new and assign to your plant.
    After maintaining Stock Determination group and rule go to "Stock Determination Item Table", here enter stock type as "F", Storage Location (if required, otherwise keep it blank), enter priority as 1, 2, 3 and valuation types against that in which sequence you want these to be determined.
    Now in SPRO > MM > Inventory Management and Physical Inventory > Stock Determination > Assign Stock Determination Rule in the Applications > Delivery > Here assign Stock Determination Rule to Delivery Item Category
    And in SPRO > MM > Inventory Management and Physical Inventory > Stock Determination > Assign Stock Determination Rule in the Applications > Inventory Management > Here assign Stock Determination Rule to Movement Type 601
    Now assign Stock determ. group in MM02, under "Plant data / stor.2" view of material master
    Now in VL01N - Click on "Stock Determination" button to get the valuation types automatically.

  • ATP check by valuation type and batches???

    Dear experts,
    I create a seles order, input one material and valuation type,  I can't fix the batche in sales order,the system give a message as following, so the ATP check is wrong.is there any solution to deal this issue?
    "Availability check for material 21-01 only occurs at plant level
    Message no. V1562
    Diagnosis
    You entered valuation type 9999999999999 for material 21-01 which is to be handled in batches without specifying a batch. Therefore, an availability check can only occur at plant level since it is not possible to determine all batches belonging to the valuation type. Usually, the plant stock level is higher than the stock level within a valuation type. Too much may be confirmed as a result.
    Procedure
    When you enter a batch number, the availability check occurs at batch level."
    Best regards
    Lance

    by myself

  • Valuation type with batch management.

    Dear all:
    We have created our self valuation category D, without automatic valuation type.
    From what we have checked, it is mandatory to enter a valuation type during batch creation with MSC1N. This link between batch master and valuation type is impossible to change.
    Our plan was to employ 2 valuation types, independently of the batch used, so that with a STO we could be able to post and outbound movement from valuation type A and a subsequent inbound goods receipt of valuation type B.
    That's a problem for us as we use batch numbers to refer to certain material features, and those shouldn't change given the valuation type, so that it is mandatory for us to use the same batch number for both valuation types. Given that the link between batch master and valuation type is unbreakable, this looks not possible.
    We already tried to de-activate the valuation type as a required field during the batch creation, but it didn't work as the field still needed an entry during the saving. There are also several error messages that would need to be de-activated (M7043, 06649...)
    If we cannot use two valuation types with the same batch, is there any solution we can manage, besides of the duplication of batch numbers?
    Any help will be greatly appreciated.
    Thanks in advance.

    Hi, Jürgen, thanks for your comments.
    We have as well the batch management at plant level, but our idea was to use split valuation in order to avoid the use of plant as the minimum valuation level, as this would have further issues regarding the logistic side (we can use the stock determination group to solve this when using split valuation).
    So we face the problem that with a given batch number we cannot post movements with two different valuation types.
    I'll take a look at the note anyway, thanks for your help.

  • Error M7044 posting goos issue (VL02N) - valuation type

    Hello!
    We have a delivery (for a consignment fill-up) which we want to post goods issue.
    But when i try to post goods issue i get the error "choose a valuation type" - M0744
    But the item line has a valuation type "EIGEN"
    Checking the material data - Accounting 1 for valuation type "EIGEN" all seems OK too...
    I don't know what i shall do, to solve the problem.
    Thanks in advance
    Markus

    Hello Jürgen,
    i checked and i have batch number and valuation type for material 215778 / batch 0.

Maybe you are looking for

  • CSV report download contains "-" for every NULL

    I try to download a report as a CSV file. In every field that contains NULL I get a minus sign ("-"). Is it possible to alter this behaviour so that it returns empty strings ("")?

  • Inspection lot for inspection type 08

    Hi Eperts, Please tell me following: Inspection lot does not create when transfer material from plant to plant. Created STO PO in plant 1000. Issueing plant is 2000. MMR maintained in both plant with inspection type 01,08 activated in both plant. As

  • Internal Number Assignment-OM(Org Unit)

    Hi In change mode of org.& staffing, system is not allowing to create org.stru. in current plan. it's throwing error "No Valid interval found". Probably this is related to internal no. assignment. Can some one help this, how to assign that in back en

  • Standby database 10.2

    HI , I have problem with my standby database, all parameters are good work but in my alert log file have following error; ORA-16401: archivelog rejected by RFS, pls help me what the problem??? On Primary: spfileORCL.ora *.control_files='/u01/oracle/o

  • WLC with ISE as radius and also external web server

    Hi friends, I am biulding a wireless network with 5508 WLC and trying to use ISE as radius server and also to redirect the web-login to it. I was trying to understand that to achieve the external web-login, do i need to use the raduius-nac option und