EBP Integration with thirdparty software
Hi SRM Gurus,
i know the procedure to how to replicate vendor/Material master data from R/3 to SRM server.But i dont know how to replicate a Vendor/Material Master data from Non sap Systems like Oracle system into SRM server. i Know that there is some Middleware systems like CRM middleware will be used.
Please let me know the Step by step procedure to replicate Vendor master data from ORACLE to SRM.
Thanks in Advance,
Kishor.
Hi Ajith,
PM and PS integration with SRM is possible in 2 ways:
- A scenario exists to get the PM order enriched in SRM, in this scenario the user can add items in the PM order from catalogs or manually. The additionnal items are sent back in R/3, there is no possibility of changing or deleting items that exist already in the PM order in R/3.
This scenario still exists in the system, but has been 'abandoned' by SAP.
- The other option is the 'Plan Driven Procurement': Making this customizing, you can integrate in SRM the PR from an SAP system (so it is after in the R/3 PM orders process, and is not limitated to PR created from a PM order). This PR can be integrated in SRM either as a requirement in the Sourcing Cockpit, or as a incomplete PO.
So please be more precise in the kind of integration you're looking for, the R/3 and the SRM versions you use (the second scenario has been enhanced in the last versions).
Hope it helps.
Vadim
Similar Messages
-
Tutorial: Azure Active Directory integration with Igloo Software
Click reply and tell us what you think:
Tutorial: Azure Active Directory integration with Igloo Software
Markus Vilcinskas, Knowledge Engineer, Microsoft CorporationHello
Can you be little clear, what you have tested with Airwatch MDM cloud?.. which scenarios?..
1) Device Enrollment ?
2) Access to Airwatch console?
3) Access to Airwatch self service portal?
By following the steps We do not get it working at all. by the way some of the steps in this tutorial are unclear and outdated;
I finally personally figured out how things should look like, and make it work but only with Device Enrollment scenarios from the mobile devices itself. not from the pc and browsers or from the Access panel. -
Result recording - Integration with external software
Hi,
Inspection is done using the external software & the results are stored in the external database.
How can we transfer the inspection results in QM Result recording?Hi,
For the upload to the SAP-System, the function module BAPI_INSPOPER_RECORDRESULTS will be used with the following mandatory input parameters:
- Inspection lot number
- Inspection operation number
- Inspection point number
- Partial lot number
- (SAP-)batch number
- Characteristic results (for characteristics with summarized result recording)
- Single results (for characteristics with original result recording).
The transfer between subsystem and QM is done asynchronously. The mapped result data will be send as IDoc to the SAP system, or via direct call of the BAPI_INSPOPER_RECORDRESULTS via RFC.
If the data is send as IDoc, the BAPI-ALE interface must be setup to process the BAPI_INSPOPER_RECORDRESULTS at receipt of a new IDOC.
Kindly contact with your ABAP'er for further process.
Thanks & Regards,
Srinivas.D -
ITunes integration with DJ software
I use a dj program called Cross and it integrates with iTunes. After creating two iTunes library the software will recognize one of the iTunes library and then upon restarting the software it shows the iTunes section as blank. I've deleted the .xml file so that a new one would be created, I've restarted all software, restarted, computer, reinstalled the dj software- all to no avail. Help please! MacBook Pro 15" Mavericks, 8 GB.
I get the feeling you need to ask the DJ software people about this since something up with their interface. Or get very, very lucky and hope somebody here happens to use the same software in the same way as you.
-
Integration with homemade software
I am building a content management system. There will be
links to all of our files which can open any of them in a browser
window. I would also like to be able to open a file in contribute,
edit it, upload it, and exit contribute, but remain in the CMS. Can
I call Contribute from PHP or JavaScript?Hi,
what is the mobileone software?
Regards,
Siva Sankar Nulaka -
Interagration With Other Software
Dear Gurus ,
How to Integration With Other Software To SAP ( Media Advertising Management ) Module .
Thanks In Advance
Regards
S.SivaHi
Generally when there are other softwares (non SAP) then they are connected through customized interfaces. The interface can be through a XML file or VITRIA interfaces.
Some times real time RFC s are also used to call the transactions from outside SAP.
Processing the information from other systems either will be through idoc or a Z* program which will process incoming vitria files.
Idocs are created by convering the XML files (flat files) to idoc using standard sap programs.
Reward if helpful
Kind Regards
Sandeep -
FI Changes for HR Payroll Integration with Thrid party Payroll Software
Hi
I am looking for information the SAP FI activities/ Changes to be done for enabling SAP HR Payroll integration with third party payroll softwares. Can you give some issues you might have encounter and any recommended thrid party payroll softwares. Highly appreciate any documentation on the same.
Regards,
VicDownload all the files into Execel, hope after tht u can change it to CSV.... To download HR MASTER DATA use Ad-Hoc qqry. Else use SE11, SE12 or SE16 to download IT wise. PA starts with PA0000 ets OM starts with HRP1000. Hope through this u can download and send to 3rd party system....
In std we are having an option for 3rd part PY transfer. Check this if help
SPRO>CROSS APPLICATION COMPONENTS>PREDEFINED ALE BUSINESS PROCESS> HUMAN RESOURCES>HR EXTERNAL SYSTEM -
Third Party Recruitment Software integration with SAP HR
Dear Experts ,
Iam given a scenario where in the client wants the Erecruitment software Taleo to be integrated with SAP HCM.The HR recruiters/Managers are currently hiring them into the taleo software and from there the data need to be pushed to the SAP employees's infotypes.
In Addition to this the benefits infotype need to be maintained automatically in the system.Is there any way to automatically default the benefit infotype also
Kindly suggest a solution for this.
Regards
GopaYou will need interface(s) between Taleo and SAP....If Taleo is your recruiting system...then they may want...
Outbound from SAP: Interface that sends them vacant position data from SAP (you need this so that when Taleo sends you finally an employee data after hiring they can send you the position data with it).
Outbound from SAP: You may also need to send them terminations from SAP (optional - may be needed depending on your company process for handling rehires)
Inbound to SAP: This is the main file from Taleo after offer is accepted and employee is hired in Taleo. At this time Taleo will send you a file for which you can write an interface to hire these employees into SAP. You can do a BDC session with PA40 - you may have to determine if its a hire or rehire here. If you are processing payroll then its important to make sure you have all the payroll related info types (if they are not coming from Taleo then you should at least have them defaulted to what your client agrees).
The second part to your question
Creating benefits depends on how you are getting or determining benefits data.
1. Benefits configuration has something called automatic/default plans...
>>> "Automatic" plans are something employee is enrolled into and has no option to change them.
>>> "Default" plans are something employee is enrolled into on new hire and typically has 30 days to make changes...this is standard configuration for each plan and should be completed.
If it is controlled via benefits config then you just need to go through hire action...and typically as part of that hire action - IT0378/IT0171 will prompt you to go to benefits enrollment screen and enroll employee...into these automatic/default plans...plans will be pre-selected based on configuration. So all you do here is hit save and continue with rest of hire action. All this is recordable via BDC session.
2. If it is NOT controlled via configuration...and you are getting benefit plan details in the file then you just create them in the corresponding info types...IT0167/0168 etc. For processing sanity I would separate hire and benefits creation as two step process if all the data is coming via files...
Happy interfacing... -
RE: Legacy Integration with PI/Open
Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
SAP R/3 4.7 Integration with PCMiler/Rand McNally
Hello All,
Is anyone aware of the SAP R/3 4.7 system integration with PCMiler Global Webservices/PCMiler TCP/IP software to obtain distances in SAP shipments? Also is anyone aware of the integration between SAP R/3 4.7 and Rand McNally Global solution?
Response will be really appreciated.
Regards,
Nikhil PadwalMrutyunjay,
Did you check this <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm">link</a> explaining how you can do SSO between R/3 and EP7?
Hope that helps,
Kiran -
Brief discussion on SAP XI and its' Integration with SAP MDM.
Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik BanerjeeHi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
- For lookup table extraction
- Output in XML format which MDM can import without using XI.
- FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
- For Main table records.
- Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja -
I do not want integration with IOS or iCloud
Hello,
I have a late 2010 27 inch iMac and a first generation iPad.
I foolishly installed Mountain Lion when it came out and have become increasingly frustrated and irritated with the emphasis on iCloud (I did not install that) and integration with IOS.
I do not like the way Safari operates in this OS nor the alterations to mail and other applications.
It seems to be very difficult to revert to Snow Leopard which is what I would prefer to do.
It also seems that Apple does not understand that some users just want to use a computer in the traditional way and have no interest in social networks or in integrating devices.
I have been using computers for 25 years and do know what I need.
Does anyone have a simple solution to reverting to Snow Leopard and ignoring these latest developments?
Everyone is urged to back up with Time Machine which is what I have always done - to an external drive. However, it seems this is useless when wanting to revert to SL as I do so that was a waste of time too.
JoanThese programs will make a clone.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Commonly Used Backup Methods -
Integration with MS VC++ DLL
Dear Forte - colleagues
I've got the following questions to clarify. They are mainly
regarding integration with External Systems.
1. To invoke my C function from Forte, I've created a project that
wraps C function, configured this as a library and made distribution
without autocompiling. (We are not able to use AutoCompile option). So
I have to build a DLL manually. I created a MS VC++ project
containing the following files:
1. fcinter.cc - is generated by Forte
2. fcinter.cpp - my C functions
3. Forte libraries fortent\install\lib\*.lib
Although FCInter.DLL has been compiled and linked successfully, but I
get the following diagnostic:
System Error: The specified procedure could not be found.,
loading the symbol 'fcint_GetScope' from the library
'c:\fortent\userapp\fcinter\cl0\fcinter.dll
However this function is seen by Dumpbin /EXPORTS.
I suspect that something is wrong in MS VC project settings. My
questions are: Which settings of MS VC++ project should I use to make
this function visible for Forte? Or what should be the command line
to run CL command line compiler?
2. And lastly, may be it seems funny but we cannot find the 'Release
Notes' doc in Forte manuals nor in the installation CDs. Can somebody
send it to us as email attachment? Mainly I need information about
interaction with C++ compiler on WinNT platform. We are happy
possessors of Forte 3.0.D.0.
Thank you in advance for your help.
Gleb Tulukin
IBCI had to download the 64 bit librfc32.dll from SAP software download center as outlined in note 413708.
Please note that the librfc32.dll installed as part of SAP GUI is 32 bit. Hence, I was getting the BadImageFormat exception. -
Reg_GRC 10.0 Integration with backend systems
Hi Everyone,
Could you please help me to find out which all of the below products can be integrated with GRC 10.0 Access control.
Click Schedule
PI System
BOBJ - CMS
BOBJ-DS-CMS
SAP Mobile Platform - Derby
Afaria
ADP
ARIS Cloud
SOLMON
Adobe Live Cycle
SAP Mobile Platform - Agentry
Click Plan
Click Roster
Success Factors - LMS
Success Factors - EC
Success Factors - Talent Management
Success Factors - Performance Management
Benefitfocus
BOOMI
KNOA
SAP Central Process Scheduling by Redwood
SAP Extended Diagnostics by CA Wily
SAP Quality Center by HP, enterprise edition, bundle
SAP Test Acceleration and Optimization
SAP NetWeaver Landscape Virtualization Mgmt enterprise
Thanks and Regards,
Naga.Hi Hemant
SAP has made a lot of the transport functionality in GRC10. I find that they hereby created a huge expectation with the customer, that in fact is not true.
For instance Exclusion Objects and Mitigation Controls are NOT transported. What about Organizations? Critical Roles and Profiles are also not transportable.
As for the Connectors - system specific parameters are transported. Therefore you end up having to delete the DEV and QA connectors in the PRD GRC system.
On this question, has anyone used CLM yet? It seems that only Functions and Risks will be extracted to CLM and then deployed in the other system (DEV to QA for example). Does CLM even work?
SAP provide not guidance on all of these important issues. I agree that it is about time that SAP takes some leadership and produce a proper best practise guide for this software. By the way, an offical sizing document from SAP is still to be delivered.
Thanks
Will -
Quick Adress System (QAS) integration with SAP
Hi,
Can anybody please let me know how the Quick Address System can be integrated with the SAP.
It iwll be great if any of you [please forward me the documentation or installation guide for this integration.
Also, after proper integration of QAS, how can i acces it in SAP system. Is there any t.code or something like this? Plz provide any of the solution on it asap.
Best regards
GauravHi Gaurav
I'm the developer of the SAP QuickAddress Solution.
There are 2 main categories of SAP QuickAddress integration these being
SAP Certified Solution (GUI)
Non-Certified soultion (GUI)
The SAP Certified version hooks in via the BADI ADDRESS_CHECK, there is no need to change any SAP standard code or screen. Simply go into any address screen (eg BP) try and modify an address and you should get a popup if the address was invalid or incorrectly formated.
The non-certified version is similar to the certified but you would have to change code and screen, the advantage of this version is that it can integrate into any screen.
When you buy this software QAS normally come out on site and install and demo the software, I assume they haven't done this. If you want documentation give them a call (www.qas.com).
All QAS objects (ie transactions, tables, etc) are under the namespace /QAS/, search under this and you should find what you want.
NB: There will also be a ABAP Webdynpro version of this software available soon
Regards
Muntazir Khan
Maybe you are looking for
-
How to add & fill custom fields in POWL Query
Hi all, I have a requirement where I need to create a new POWL Query and should show the Defect data of each Issue ID. I looked for tutorials and threads about POWL queries but can't seem to find the information I needed. In details, I need a new que
-
Show image quality as like original image after resize in as3.
Hi Guys, I am working on a Action Script3 project and i am showing images after resizing. I am using Bitmap and BitmapData manipulation for this but not getting image quality as like original image. Please guide and help me with code that how can i
-
JMS Queue Communnication in ODI 10.1.3.5
Hi Everyone . I Need to pass data from ODI to a OJMS Queue present in Oracle Application Server . So i followed the following Steps in the following Document . http://blogimg.chinaunix.net/blog/upfile/071025000239.pdf the Oc4J Container and ODI Both
-
Chrome, Firefox, Spotify & Word keep crashing... Help
I installed Chrome this weekend. Everything was fine until yesterday. On chrome, the text on websites started to look like code or wingdings font (for lack of better term) instead of English. Then it kept crashing. I finally un-installed. After that,
-
Ipad shuts down when battery is at 20%, since updating to 7.0.4
I've read a few posts about battery issues and I've tried everything from battery saving tips, to resets, to restoring my ipad. Nothing is working. My sister also has an ipad 2 and has exactly the same issue except hers shuts down at 35-45%. This is