EBP Invoice Use External Number Range is Possible?

Hi Experts,
I try to send SUS Invoice to EBP, but I found it seems impossible to create EBP Invoice with external number range. I have set external number range and assign to Invoice Transaction Type in SPRO. But it seems doesn't work.
Is EBP invoice use external number range possible? Many thanks

Hello Sudhir,
This topic has been discussed many times at SDN forum, please search at SDN forum before you post your question !!
Anyway i have included the below links for your easy referrence.
[External number range for billing document (Invoices)|Re: External number range for billing document (Invoices)]
[Billing document number range   |Re: Billing document number range]
Regards,
Sarthak

Similar Messages

  • External Number Range for Handling Unit in COWBPACK Transaction

    Dear All,
    I need to activate external number range for handling units in COWBPACK transaction.
    i have tested but its not possible in standard SAP.
    i want to know any USEREXIT or BADI or BAPI for the same, so that we can use external number range for HU in COWBPACK.
    with regards
    Azeez.Mohd

    Hi,
         Thry this BADI
    BADI_HU_MAIN
    BADI_HU_SAVE
    Regards
    GK.

  • External number ranges in LSMW

    Hi all,
    can anyone explain me that how to use external number ranges in LSMW.
    I have to upload data using MM01 in LSMW.
    one material number should be extended to 8plants.but the field values for some fields are varying.the material number should be same for 8plants
    For this issue, which method i should follow.

    exteernal ranges means you are going to extend this material in all 8 plant.
    material number remains same.
    that means just you have to pass material number by yourself in upload.
    upload file
    material        plant     qty ................
    1                  plant1
    1                  plant2
    1                  plant 3
    1                 plant 8.
    with this  material 1 is extended in 8 plants.
    reward if useful.
    Amit Singla

  • External Number Range for Invoice

    Hi All,
    If we  use USEREXIT_NUMBER_RANGE - RV60AFZZ to specify  external number then can we enter alpha-numeric or only numeric value.
    regards
    Debasish

    Debasish,
    Few things a wish to suggest you,
    1. SAP always says try to avoid External number ranges for invoices, as it has legal as well as technical compliances.
    2. By using user exit, even though you will enter the external numbers but in case of several and multi user systems there may be chances of inconsistencies.
    Anyway if you have decided to do this then Yes its possible you can use Alphanumeric numbers also
    Thanks,
    Raja

  • External number range for billing document (Invoices)

    Hi guys,
    I have a requirement from one of client to implement external number range for billing documents.
    I can only see a provision for internal number range in customising for Billing document type.
    Please can you assist me with detailson how to set up external number range for billing documents (Invoices).
    Thanks, Felix

    Hi Felix
    I think the similar requirement is in Venezuela also.
    So pl. check the SAP Note 849438 . As per the note :-
    The solution is delivered in the indicated support packages. In case you can not implement the correspondin support package for your release immediately, please follow the procedure described below:
    1. In the Data Dictionary Editor (transaction SE11) please open the definition of domain J_1AOFFNREL, go to the fixed values and add value 'P' with description 'Number Assingment using Prenumbered Forms' in a position so that the possible values remain sorted alphabetically.
    2. In the Message Editor (transaction SE91) please go to message class ICC_CN and add the new message 837 with text '&1: Official doc. numbering is not available for delivery documents!'.
    3. If you are implementing the note in release 4.6C, please create the following function modules:
    o     OFF_NUMBER_LOCAL_ASSIGN_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_ASSIGN_TW
    o     OFF_NUMBER_LOCAL_NUMBERING_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_NUMBERING_TW
    o     XBLNR_BUILD_AND_SPLIT_VE in function group IDSDCNUTIL, and then copy the interface (all parameters and exceptions) of the function module XBLNR_BUILD_AND_SPLIT_PECL
    4. Implement the source code corrections as shown below.
    The following customizing actions should be also executed when the solution by delivered by the corresponding support package. If you applied the solution manually, then please use the IMG activities listed in the section Cross-Application Components -> General Application Functions -> Cross-Application Document Numbering -> Taiwan as a reference. After the installation of the corresponding support package the customizing node for Venezuela can be used.
    1. Enable the use of business place for country Venezuela as described in the OSS Note 726537.
    2. Define the necessary document classes and configure the document types you would like to get an official document number as relevant for official document numbering in the desired mode. Please check the OSS Note 571376 for some explanations about the meaning of the different settings.
    3. Define the necessary number ranges and intervals and assign them to the combination of company code, business place, document class and validity period. If you use the customizing activity for Taiwan, then please leave the prefix field empty.
    Regards
    Amitesh

  • Sd invoices posting with External number range

    Hi,
    i am a fico consultant and dont know the proceedure that how to post SD invoice thorugh Sales orders with external number  range?
    while posting it is giving error like use internal number range.how to over come this.help me
    Thanks
    Prathima

    Good Afternoon Prathima.
    Use tcode OBA7
    Look for Doc type RV Billing Doc trn.
    This doc is generally used for posting Billing doc to accounting.
    Here you would find Number range as external.
    Reason: As per standard, the Accounting doc number is similar to your the Billing account.So, that there would not be any difference in numbers of both, therefore for accounting doc - Billing doc trnsfer (RV) the number range is Internal number but the Billing doc type will havre internal number range.
    And as you are FI consultant, I don't feel I need to explain why or purpose these numbers should be similar from accounting point of view.
    Hope it solved your query. Kindly reward.
    Take care. JP.

  • EXTERNAL NUMBER RANGE FOR INVOICES

    Dear Gurus,
    Plz tell me how do we put external number range for billing documents.
    this option is not there in VOFA.

    Hi Anil,
    Hi,
    Number Ranges are maintained in T.Code: SM30.
    Provide the Table/ View, say Bill_Num for example.
    In Tab: Restrict data Range, Click Radio button: No restrictions and Click Tab: Maintain.
    In new window, maintain all the combinations for Columns: Sales Org, dist. Channel & Bill type and no values in IntNR.
    Save the data.
    I hope this will work.
    Regards,
    Amit

  • External number range for purchase order response?

    Hi all,
    is it possible to use an external number range when creating purchase order responses (BUS2209, PCO, POR) manually?
    If I transfer the POR from an external system like SUS via XML, can I use an external number range?
    I'm using SRM 4.0 (EBP 5.0) in standalone scenario with Business Connector 4.7 as XML interface.
    Any help is appreciated,
    Karsten

    Hi
    No need to maintian Internal number range.. Yes you need to use an external number range
    Only the PO, RQ & RS are sync and therefore must correspond with the R/3 number ranges.
    The rest, Shop Cart (SC), Local PO (EBP), Confirmation, Invoice, Bid Inv and Bid, aren't synced and can be assigned to any number range. (FYI- using ECS)
    Re: Extended Classic - Purchase Order Number Ranges
    http://help.sap.com/saphelp_srm50/helpdata/en/87/7cc73cee4fb55be10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/6d/0f343e47fd6b2ee10000000a114084/frameset.htm
    Re: Number range config
    Re: config for Number Ranges ? :-(
    Re: PO Creation with external PO number
    Purchase Order Response BUS2232
    PO number range Issue
    Re: Defining the number range
    Regards
    - Atul

  • External number range for Billing Document

    Hi Gurus,
    Can you please let me know how to get the external number for the invoices? I know there is no standard way but if there is a way around to determine it. And the external number should be first 2 places are alphanumeric and dynamic and the next 2 places are also alphanumeric but constant and the rest of the digits should be a serial number of length 7. So, the total length of the number range should be 11. Please let me know if there is way to determine it this way.
    Example:
    AB + HY + 1000001
    CD + HY + 1000002
    Like wise.....
    Thanks in advance.
    Regards,
    Gangi

    hello, friend.
    you can define your number ranges using VN01.  in here, you can set up alpha numeric ranges and specify external.
    technically, you can assign this set to the billing type using VOFA. 
    however, it is not best practice to assign external number ranges to billing types, as it is possible to 'jump' the sequence of the numbering.  you do want to keep track of the sequence of billing docs.
    a possible exception is if you have an external billing software which generates a number, which you will then capture in SAP.  barring exceptions, it is best to retain internal assignment.
    regards.

  • Excise invoice and domestic invoice sharing same number range

    Hi,gurus,my question is addresed to the sap cin gurus
    Scenario:-- Normally sap has provided provisions that the domestic invoice and the excise for the export will have different number range object
    Transaction-snum or snro(As per the rule the no range has to be approved by excise authorities)
    Requirement:--The present requirement of the client is that as per their requirement they will be using the same excise number range both for domestic and the export(They have got the approval from the excise department as per the amendment,that specifies the same)
    so i request you to pls guide me as how can it be done in sap that two different business process will share the same number range.
    as per my knowledge local excise number range is-J_1IEXCLOC
    and for exports is-J_1IEXCEXPand the both will use the same number range and,suppose 1 local invoice is created and say if the no is 1,then if the export excise invoice is created the number will be 2,pls guide me how is it possible that the same number range should be used.
    Thanks in advance---Anshuman chakraborty

    Dear sir,Thanks for attention towards the issue,but still i need to clarify some details-
    the number range forJ_1IEXCLOC are already configured .It is not the case like i have to configure it for the first time however ,so the issue remains how shall i proceed in this case
    Sir,i have already checked the transaction j1iin,it does not give any such box to check the-use local no range
    infact the error message which the system was throwing to the user that-number range object not assigned for Object: J_1IEXCEXP.
    The question remains from my side is what are the complete configuration steps I need to do ,to make the check box appear so as to select-use local number range,and is there any thing to be conveyed to my developer,so that the same appears,
    or is it the case like the anything should earlier have been done before the number range for J_1IEXCLOC was created.i would request u to pls guide me giving the complete details of the step to be followed.
    Thanks in advance
    Anshuman chakraborty

  • SD - Billing - External Number Range

    Hi,
    I have two questions related to SD billing document numbering:-
    1. I am getting error message of [Please specify an internal number range Message no. NR752] while saving a billing document based on the delivery. I have checked only external number range box in VN01. Do I need to use any user-exit for this? If yes then there are 2 user exits available -
    a) USEREXIT_NUMBER_RANGE_INV_DATE USING US_RANGE_INTERN in program RV60AFZC
                              b) FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN in program RV60AFZZ
    but both the cases the variable is US_RANGE_INTERN which is not allowing external number range ID to pass. How this external no range works.?
    2. I have a business requirement for our Mexican company code on external alphanumeric number. There would be 3 billing types say, ZF2, YF2 and ZYF2. Mexican government provides Invoice numbers in advance.
    ZF2 Number range would be A001 to A999
    YF2 Number range would be B001 to B999
    ZYF2 Number range would be C001 to C999.
    All these Invoices would be created at same time. i.e. parallel processing. Also all these invoices would be transmitted thru EDI -IDOC. And accounting document should have same number as billing document will carry i.e. external govt provided numbers.
    How do I map this in systems. My experience says alphanumeric number range is not supported by SAP. Anybody may share his solution on this would be simply great.
    Thanks
    Subrata Das

    FORM USEREXIT_NUMBER_RANGE                                    *
          This userexit can be used to determine the numberranges for   *
          the internal document number.                                 *
          US_RANGE_INTERN - internal number range                       *
          This form is called from form LV60AU02                        *
    FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN.
    Example: Number range from TVFK like in standard
    US_RANGE_INTERN = TVFK-NUMKI.
    *{   INSERT         DEVK905392                                        1
    There was a need to check whether all the mandatory pricing
    conditions have been filled before creation of an invoice so that
    the invoice is released to accounting as and when it is created.
    Piece of code written below ensures the same. Field uvprs = 'X'
    in item table indicates that the item is incomplete with respect to
    pricing.
      LOOP AT xvbrp WHERE uvprs = 'X'.
        EXIT.
      ENDLOOP.
      IF sy-subrc EQ 0.
        MESSAGE e073(vf) WITH xvbrp-posnr.
      ENDIF.
    TABLES : zbd_nr_code.
    data : aa like zbd_nr_code-nr_code.
      IF sy-tcode = 'VF01'.
       SELECT SINGLE *
         FROM tvko
        WHERE vkorg = vbak-vkorg.
       IF sy-subrc EQ 0.
          SELECT SINGLE NR_CODE INTO ZBD_NR_CODE-NR_CODE
            FROM zbd_nr_code
           WHERE vkorg    = vbrk-vkorg
             AND werks    = vbrp-werks
             AND fkart    = vbrk-fkart.
          IF sy-subrc = 0 .
            us_range_intern = zbd_nr_code-nr_code.
          ENDIF.
       ENDIF.
      ENDIF.
    I feel this will help out.
    Regards

  • Bapi with external number range

    i am using bapi_goodsmvt_create.i want to assign external number range.how it possible?

    It depends on whether you have a service master or not.
    1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
    2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
    Makes sense?
    A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
    Regards,
    Ravi
    Message was edited by: Ravikumar Allampallam

  • Packing instructions - problem with external number range

    Hi Gurus:
    I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
    The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
    I appreciate your valuable input
    Tamas

    For further records:
    we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

  • Change from Internal to External Number range for customer account group

    Hi,
    We would like to change the number range assignment for a customer account group from internal to external. The external number range assignment check box is greyed out as a few numbers in the range have already been used up.  We want to do the internal to external assignemnt change, create a customer of a specific number, and revert the range back to internal assignment. Is this possible?
    Appreciate your help.
    Ram

    Hi,
    Please do the below steps:-
    (1) Go to XDN1 and click on "Maintain status" button. Note down the current status and change the status to zero. Save.
    (2) Again go to SDN1 and click on "Maintain No. Range" button, and change the no. range to external. Save. (if that number range is maintained for multiple years, then make it external for the first yer and for the subsequent years, it will become automatically.)
    (3) Then create your customer with specific number.
    (4) Then go to XDN1 and click on "Maintain No. Range" button, and change the no. range to internal. Save. (if that number range is maintained for multiple years, then make it internal for the first yer and for the subsequent years, it will become automatically.)
    (5) Again go to XDN1 and click on "Maintain status" button. Maintain the current status as the number noted down in step (1) above. Save. (In case number created in step (4) is greater than the number notes in step (1), maintain the number of step (4) in current status.)
    Regards,
    Gaurav

  • Exit for assigning external number range to sales document

    hello friends,
    can anyone help with this issue.in tcode 'vn01' we are assiging internal number range but we dont want that number range that is external number range rather than using internal number for sales document.i.e the number range should start with 'ufc'followed by some number range.
    plz reply as soon as possible .
    thanks and regards,
    siri

    Hi Sirisha,
    I believe you can assign external number range manually by using transaction SNRO and then assign the number range before entering into the main screen of  VA01 or saving the document.
    The number range is linked to the order type (VBAK-AUART), this is done in customizing.
    For different sales area it need to have different number ranges for the same order type.
    Please see that the same sales doument number should not be linked to several sales orders which are to be created,if I am not wrong
    Regards,
    Naresh
    ****Please do reward points if found useful

Maybe you are looking for