EBS 11.5.10.2 Merge Multi Node to Single node.

Hello,
I have a two node EBS Production application tier running on 11.5.10.2.
I have the concurrent manager running on Node A, and the rest of the services running on Node B. I'd like to retire the Node A server.
Can someone help me with the steps to move the concurrent manager to Node B and remove Node A from the configuration?
The steps I have come up with so far are:
1. Run maintain snapshot information on Node A & B.
2. Run perl adpreclone.pl appsTier merge on Node B.
3. Run perl adpreclone.pl appltop merge on Node A.
4. From Node A copy $COMMON_TOP/clone/appl to Node B.
5. Shutdown application tier on Node A & B.
6. Copy log and output files to Node B.
7. Run perl adcfgclone.pl appsTier on Node B.
8. On node B run :
Adadmin -> generate JAR files
-> generate message files
-> relink executables
-> copy files to destination
Adadmin -> Check for missing files, and manually copy files if needs
9. On node B run: EXEC FND_CONC_CLONE.SETUP_CLEAN;
10. Start Application tier and verify changes.
I'm not sure step 9 is right for this process. I want to keep the printer configuration.

1. Run maintain snapshot information on Node A & B.
2. Run perl adpreclone.pl appsTier merge on Node B.
3. Run perl adpreclone.pl appltop merge on Node A.
4. From Node A copy $COMMON_TOP/clone/appl to Node B.
5. Shutdown application tier on Node A & B.
6. Copy log and output files to Node B.
7. Run perl adcfgclone.pl appsTier on Node B.
8. On node B run :
Adadmin -> generate JAR files
-> generate message files
-> relink executables
-> copy files to destination
Adadmin -> Check for missing files, and manually copy files if needs
9. On node B run: EXEC FND_CONC_CLONE.SETUP_CLEAN;
10. Start Application tier and verify changes.
I'm not sure step 9 is right for this process. I want to keep the printer configuration.All your steps look OK to me -- -- (Sharing the Application Tier File System in Oracle Applications Release 11i [ID 233428.1] -- Section 4: Merging existing APPL_TOPs into a single APPL_TOP)
Step 9 is correct and you need to purge FND_NODES table and run AutoConfig on all tier nodes (you will not lose any printer configuration) --
How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]
Thanks,
Hussein

Similar Messages

Transforming from multiple node to single node

Hi,
I new to BPEL trying to transform data from two different multiple nodes to single node of complex type.
For Eg where 'req1' and 'req2' are multiple nodes in request:
Request::
<req1>
<a1/>
</req1>
<req2>
<b1/>
</req2>
Response::
<c>
<ca1>
<cb2>
</c>
Please can anyone help me in getting the solution.
Hope the pseudo-logic is clear!!!
Edited by: c devi on Oct 18, 2011 7:12 AM
Edited by: c devi on Oct 18, 2011 7:12 AM

Hi',
You can try this,
<xsl:template match="/">
<client:processResponse>
<xsl:for-each select="$Var2.payload/client:process">
<client:result>
<xsl:value-of select="client:input"/>
</client:result>
</xsl:for-each>
<xsl:for-each select="/client:process">
<client:result>
<xsl:value-of select="client:input"/>
</client:result>
</xsl:for-each>
</client:processResponse>
</xsl:template>
Source:
<req1>
<a1/>
</req1>
<req2>
<b1/>
</req2>
Target
<c>
<c1/>
</c>
You can do like this,
Inside the Transform first put the for-each over the target variable, i.e. just above c1, then right click on the for-each > add XSL node > 'Clone' for-each.
This will create the source one more time i.e. you will have now 2 targets of the same type,
Like this.
Target
<c>
<c1/>
</c>
<c>
<c1/>
</c>
now join the wires from source to target for both of them, now right click on the transform (in the center) and do Test, this will give you the output.
-Yatan

Mapping re-occurring node to single node

Hi,
I would like to map an Element with maxOccurs=unbounded to an Element with maxOccurs=1. So, instead of making a new target node for each occurrence of the source node I want to merge all occuring source node values to only one target node and put semicolons between them.
Basically I want to create a target node with CSV from a re-occurring source node.
Is this possible in message mapping?
Solutions that work will be highly rewarded!
Thanks,
Mattias

Hi Venkat,
I have problems with your code during activation:
Activation of the change list canceled Check result for Message Mapping WMS_Articles3_MM | urn:eldorado.ru:wms:Articles: Starting compilation Source code has syntax error: D:/usr/sap/EXD/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapb14cbc80bd9311dbbb9f0030053fd998/source/com/sap/xi/tf/_WMS_Articles3_MM_.java:84: cannot resolve symbol symbol : variable length location: class java.lang.String for(int j=0; j<a.length; a++){ ^ D:/usr/sap/EXD/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapb14cbc80bd9311dbbb9f0030053fd998/source/com/sap/xi/tf/_WMS_Articles3_MM_.java:84: operator ++ cannot be applied to java.lang.String for(int j=0; j<a.length; a++){ ^ D:/usr/sap/EXD/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapb14cbc80bd9311dbbb9f0030053fd998/source/com/sap/xi/tf/_WMS_Articles3_MM_.java:85: array required, but java.lang.String found value += a[j]; ^ D:/usr/sap/EXD/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapb14cbc80bd9311dbbb9f0030053fd998/source/com/sap/xi/tf/_WMS_Articles3_MM_.java:87: cannot resolve symbol symbol : variable result location: class com.sap.xi.tf._WMS_Articles3_MM_ result.addValue(value); ^ 4 errors
What could be wrong?
Thx,
Mattias

Replacing multiple nodes with single node in OSB

Hi,
I have a case where I will get a xml like below:
<LINEITEMS>
     <LINE_ITEM>
          <LINE_ITEMNO>1</LINE_ITEMNO>
          <STATUS_CODE>0</STATUS_CODE>
          <MESSAGE>MESSAGE1</MESSAGE>
     </LINE_ITEM>
     <LINE_ITEM>
          <LINE_ITEMNO>3</LINE_ITEMNO>
          <STATUS_CODE>0</STATUS_CODE>
          <MESSAGE>MESSAGE3</MESSAGE>
     </LINE_ITEM>
     <LINE_ITEM>
          <LINE_ITEMNO>1</LINE_ITEMNO>
          <STATUS_CODE>0</STATUS_CODE>
          <MESSAGE>MESSAGE2</MESSAGE>
     </LINE_ITEM>
     <LINE_ITEM>
          <LINE_ITEMNO>3</LINE_ITEMNO>
          <STATUS_CODE>0</STATUS_CODE>
          <MESSAGE>MESSAGE4</MESSAGE>
     </LINE_ITEM>
<LINE_ITEM>
          <LINE_ITEMNO>2</LINE_ITEMNO>
          <STATUS_CODE>1</STATUS_CODE>
          <MESSAGE>MESSAGE5</MESSAGE>
     </LINE_ITEM>
</LINEITEMS>
I need to make this as below:
<LINEITEMS>
     <LINE_ITEM>
          <LINE_ITEMNO>1</LINE_ITEMNO>
          <STATUS_CODE>0</STATUS_CODE>
          <MESSAGE>MESSAGE1;MESSAGE2</MESSAGE>
     </LINE_ITEM>
     <LINE_ITEM>
          <LINE_ITEMNO>3</LINE_ITEMNO>
          <STATUS_CODE>0</STATUS_CODE>
          <MESSAGE>MESSAGE3;MESSAGE4</MESSAGE>
     </LINE_ITEM>
<LINE_ITEM>
          <LINE_ITEMNO>2</LINE_ITEMNO>
          <STATUS_CODE>1</STATUS_CODE>
          <MESSAGE>MESSAGE5</MESSAGE>
     </LINE_ITEM>
</LINEITEMS>
I need to have only one entry for each line Item.
Please let me know on the approach on how to do it in OSB.
Thanks

You can try this :-
let $out:= <LINEITEMS>{ for $x in 1 to count($input/LINE_ITEM)
                              let $LineItme := $input/LINE_ITEM[$x]/LINE_ITEMNO
                         let $match:= for $y in $x to count($input/LINE_ITEM)
                              where $input/LINE_ITEM[$y]/LINE_ITEMNO= $LineItme
                              return $input/LINE_ITEM[$y]/MESSAGE
                              return
                              <LINE_ITEM>
                                   <LINE_ITEMNO>{$LineItme/text()}</LINE_ITEMNO>
                                   <STATUS_CODE>{data($input/LINE_ITEM[$x]/STATUS_CODE)}</STATUS_CODE>
                                   <MESSAGE>{fn:data($match)}</MESSAGE>
                              </LINE_ITEM>
}</LINEITEMS>
return $out
You many then have to remove duplicates with line items. use fn:distinct() and then loop through.

Clone multi-node RAC and ASM to single node

Hi everyone.
I need clone system with 3 application server and 2 oracle database RAC and ASM to single-node. The operating system is RHEL 5.
I see some metalink notes, but we can't found nothing. I find notes with multi-node to single-node, but nothing with RAC to non-RAC.
The eBS version is 11.5.10.2 and database version is 10.2.0.3
Is possible this clone?
Thanks very much.

Hi User;
Please follow below and see its helpful:
EBS R12 with RAC and non-RAC
Re: RAC to single instance ebs R12
Re: Clone Oracle Apps 11.5.10.2 RacDB to Non-RAC DB
Re: CLONING R12 RAC to NON RAC CLONING giving error RMAN-05517 temporary file
[b]Migrating the DB-Tier (DB and CM) to Two node non RAC cluster[/b]
Also check:
http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html
Regard
Helios

Rapid clone 11.5.10 from single node to Veritas cluster environment

Is anybody there who had done the same and working? Please shed some light.
version 11.5.10
Source
DB tier : DB, CM and Admin ( OS : Solaris 10 ), single node
App tier : FrmSrv, iAS ( OS : Solaris 10), single node
Target
DB tier : DB, CM, and Admin ( OS : Solaris 10), 2-nodes Veritas Cluster
(active/passive)
App tier : FrmSrv, iAS (OS : Solaris 10), 2-nodes load balancer
I've many time single node to single node rapid clone , no problem.
But with this single node to multi-nodes, no luck.
your input is much appreciated

Hi
You can use the Advanced cloning (section 4) of the cloining document# 230672.1
to clone signle node to multi node systems.
for webserver load balancing follow the metalink note#:217368.1
Regards
Srinath

Clone 11i from multinode to single node to new server.

Hi,
As per the following details, I have to clone the 11i environment from multinode (3 nodes) to single node on OLE5.
ServerA: FORMS, WEB, ADMIN
ServerB: CP, FORMS, WEB, ADMIN
serverC: DB
Hardware Loadbalancer used with SSL encryption.
Clone requirements:
ServerX: CP, FORMS, WEB, ADMIN, DB (No hardware Load balancing & No SSL)
Please guide me with the important steps to clone from multi-node to single node in this situation.
Thanks,

959674 wrote:
Hi,
As per the following details, I have to clone the 11i environment from multinode (3 nodes) to single node on OLE5.
ServerA: FORMS, WEB, ADMIN
ServerB: CP, FORMS, WEB, ADMIN
serverC: DB
Hardware Loadbalancer used with SSL encryption.
Clone requirements:
ServerX: CP, FORMS, WEB, ADMIN, DB (No hardware Load balancing & No SSL)
Please guide me with the important steps to clone from multi-node to single node in this situation.
Thanks,Use Rapid Clone.
Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Cloning Oracle Applications Release 11i with Rapid Clone [ID 230672.1]
Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]
Thanks,
Hussein

Clone from multinode to single node

Hi,
db version=10.2.0.3 Oracle Application 12.1.2 o/s Linux 5
i want to clone from multi node to single node i am just concern about how to define the Hosts for Database and Application in a single machine
should i define db host on etho and Application host on eth1 network adapters
Pleas advice ....

HI,
Refer Note 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
I hope u have applied necessary patches...(Latest Rapid Clone patch & autoconfig patches)
Follow these steps....
Clone PROD to DEV
1.     Prepare the Source System
a.     cd <RDBMS ORACLE_HOME>/appsutil/scripts/<CONTEXT_NAME>
perl adpreclone.pl dbTier
b.     cd <COMMON_TOP>/admin/scripts/<CONTEXT_NAME>
perl adpreclone.pl appsTier
2.     Shutdown the Source system.
Take the Backup
tar -czvf prodappl.tar.gz prodappl/
tar -czvf prodcomn.tar.gz prodcomn/
tar -czvf prodora.tar.gz prodora/
3.     Scp /ftp the all files & folders od source to target.
Scp *.tar.gz hostname@username:/path
4.     Shutdown Apllication & Database of Target.
5.     Take backup of target
mv devappl bdevappl
mv devcomn bdevcomn
mv devora bdevora
6.     Mv proadappl devappl
Mv prodcomn devcomn
Mv prodora devora
Mv proddata devdata
Mv proddb devdb
7.     Login as root
Remove the entries in oratab & oraInventory
8.     Run post clone scripts
a.Database Tier
cd $ORACLE_HOME/appsutil/clone/bin
perl adcfgclone.pl dbTier
[oracle@dbs4 bin]$ perl adcfgclone.pl dbTier
Enter the APPS password [APPS]:
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
Provide the values required for creation of the new Database Context file.
Do you want to use a virtual hostname for the target node (y/n) [n] ?:
Target instance is a Real Application Cluster (RAC) instance (y/n) [n]:
Target System database name [PROD]:DEV
Target system RDBMS ORACLE_HOME directory [oraDB/proddb/9.2.0]:/devDB/devdb/9.2.0
Target system utl_file accessible directories list [1]:
Number of DATA_TOP's on the target system [1]:
Target system DATA_TOP 1 [oraDB/proddata]:/devDB/devdata/
Do you want to preserve the Display set to dbs1:0.0 (y/n) [y] ?:
Do you want to preserve the port values from the source system on the target system (y/n) [y] ?:
Database port is 1521
Backing up /devDB/devdb/9.2.0/appsutil/DEV_dbs4.xml to /devDB/devdb/9.2.0/appsutil/DEV_dbs4.xml1.bak
Creating the new Database Context file from :
/devDB/devdb/9.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/devDB/devdb/9.2.0/appsutil/DEV_dbs4.xml
Log file located at /devDB/devdb/9.2.0/appsutil/clone/bin/CloneContext_06210847.log
Running Rapid Clone with command:
perl /devDB/devdb/9.2.0/appsutil/clone/bin/adclone.pl java=/devDB/devdb/9.2.0/appsutil/clone/bin/../jre mode=apply stage=/devDB/devdb/9.2.0/appsutil/clone/bin/.. component=dbTier method=CUSTOM dbctxtg=/devDB/devdb/9.2.0/appsutil/DEV_dbs4.xml showProgress contextValidated=true
Beginning database tier Apply - Mon Jun 21 08:48:20 2010
Log file located at /devDB/devdb/9.2.0/appsutil/log/DEV_dbs4/ApplyDBTier_06210848.log
Completed Apply...
Mon Jun 21 08:50:06 2010
Beginning APPSDB_DEV registration to central inventory...
ORACLE_HOME NAME : APPSDB_DEV
ORACLE_HOME PATH : /devDB/devdb/9.2.0
Using Inventory location in /etc/oraInst.loc
Log file located at /etc/oraInventory/logs/OracleHomeCloner_06210850.log
ORACLE_HOME /devDB/devdb/9.2.0 was registered successfully.
Starting database listener for DEV:
Running:
/devDB/devdb/9.2.0/appsutil/scripts/DEV_dbs4/addlnctl.sh start DEV
You are running addlnctl.sh version 115.6
Logfile: /devDB/devdb/9.2.0/appsutil/log/DEV_dbs4/addlnctl.txt
Starting listener process DEV ...
Listener DEV has already been started.
addlnctl.sh: exiting with status 0
Apps tier
[applmgr@dbs4 ~]$ cd /devAPP/devcomn/clone/bin/
[applmgr@dbs4 bin]$ perl adcfgclone.pl appsTier
Enter the APPS password [APPS]:
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
Provide the values required for creation of the new APPL_TOP Context file.
Do you want to use a virtual hostname for the target node (y/n) [n] ?:
Target system database SID [PROD]:DEV
Target system database server node [dbs1]:dbs4
Target system database domain name [dbs.com]:
Does the target system have more than one application tier server node (y/n) [y] ?:n
Is the target system APPL_TOP divided into multiple mount points (y/n) [n] ?:
Target system APPL_TOP mount point [oraAPP/prodappl]:/devAPP/devappl
Target system COMMON_TOP directory [oraAPP/prodcomn]:/devAPP/devcomn
Target system 8.0.6 ORACLE_HOME directory [oraAPP/prodora/8.0.6]:/devAPP/devora/8.0.6
Target system iAS ORACLE_HOME directory [oraAPP/prodora/iAS]:/devAPP/devora/iAS
Do you want to preserve the Display set to dbs2:1.0 (y/n) [y] ?:
Do you want to preserve the port values from the source system on the target system (y/n) [y] ?:
Complete port information available at /devAPP/devappl/admin/out/DEV_dbs4/portpool.lst
UTL_FILE_DIR on database tier consists of the following directories.
1. /usr/tmp
2. 1
3. /devDB/devdb/9.2.0/appsutil/outbound/DEV_dbs4
4. /usr/tmp
Choose a value which will be set as APPLPTMP value on the target node [1]:
Backing up /devAPP/devappl/admin/DEV_dbs4.xml to /devAPP/devappl/admin/DEV_dbs4.xml1.bak
Creating the new APPL_TOP Context file from :
/devAPP/devappl/ad/11.5.0/admin/template/adxmlctx.tmp
The new APPL_TOP context file has been created :
/devAPP/devappl/admin/DEV_dbs4.xml
Log file located at /tmp/CloneContext_06210854.log
Running Rapid Clone with command:
perl /devAPP/devcomn/clone/bin/adclone.pl java=/devAPP/devcomn/clone/bin/../jre mode=apply stage=/devAPP/devcomn/clone/bin/.. component=appsTier method=CUSTOM appctxtg=/devAPP/devappl/admin/DEV_dbs4.xml showProgress contextValidated=true
Beginning application tier Apply - Mon Jun 21 08:55:51 2010
Log file located at /devAPP/devappl/admin/DEV_dbs4/log/ApplyAppsTier_06210855.log
Completed Apply...
Mon Jun 21 09:00:47 2010
Beginning APPSIAS_DEV registration to central inventory...
ORACLE_HOME NAME : APPSIAS_DEV
ORACLE_HOME PATH : /devAPP/devora/iAS
Using Inventory location in /etc/oraInst.loc
Log file located at /etc/oraInventory/logs/OracleHomeCloner_06210900.log
ORACLE_HOME /devAPP/devora/iAS was registered successfully.
Skipping the starting of services
INFO : Rapid Clone completed successfully
Thanks
Adiga

How to switch production single node EBS environment to multi node?

We're considering moving our production EBS environment from single node to multi node to separate out the middle processing from the database. We've completed the steps via clone (adcfgclone.pl) in out test environment and are now testing, however we're leery of running the same process in production. I've researched this process greatly, but most links point to either multi to single or cloning. Please assist.

Use Rapid Clone -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
All the steps are covered under "Cloning a Single-Node System to a Multi-Node System" section.
Thanks,
Hussein

R12 Single node to Multi-node Configuration

Hi All!
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.
Thanks and Regards,
cmadiam82

Hi,
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.Contratulations. This is a good oppurtunity.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.For a start you can read
http://gjilevski.wordpress.com/2009/12/13/rac-enabling-ebs-12-1-1/
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=52&MMN_position=44:44
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=61&MMN_position=57:57
Thanks

Migrate Single Node 11.5.10.2 --- to --- Clustered Multi Node

Dear All
I have a project to migrate a single node 11i EBS to Clustered Multi-node
& I opened Thread under (Forum Home » E-Business Suite » Technology - LCM: 11i Install/Upgrade)
the URL is
Migrate Single Node 11.5.10.2 --->> to --->>> Clustered Multi Node
Please if you can help me updating that thread with your answers.
Best regards
Naji ghanim
Apps DBA
TAGITI

Dear All
I have a project to migrate a single node 11i EBS to Clustered Multi-node
& I opened Thread under (Forum Home » E-Business Suite » Technology - LCM: 11i Install/Upgrade)
the URL is
Migrate Single Node 11.5.10.2 --->> to --->>> Clustered Multi Node
Please if you can help me updating that thread with your answers.
Best regards
Naji ghanim
Apps DBA
TAGITI

Convert 11.1.0.7 EBS 12.1.3 single node to RAC with ASM on 11.2.0.3 cluster

Hi
I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
However when I start the same locally from lsnrctl command listener starts.
trace_OraDb11g_home1-1212159AM174.log
====================================
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
has placement error.
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
.lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
ember `jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
mber `jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
snr' has placement error.
[AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
[AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
JXN-UX-EBS1D1Q.lsnr' has placement error.]
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
The crsctl has details as below:
=====================
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE jxn-ux-ebs2d1q
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.cvu
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
1 ONLINE OFFLINE
ora.jxn-ux-ebs1d1q.vip
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
1 ONLINE OFFLINE
Not sure how to fix this .
Regards
Ram

I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
along with SCAN_LISTENERS

How to do data migration between single node and multi node HANA systems ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

How to run all Concurrent Requests in a single node in a multi node env

DB;11.1.0.7
Oracle Apps:12.1.1
OS:Linux 86x64 Red Hat
PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?
Thanks for your time!
Regards,

PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?Concurrent requests will be processed by the CM nodes and it has nothing to do with the 3 web tier nodes you have.
If you mean the database instance, then please see these docs.
How to run a concurrent program against a specific RAC instance with PCP/RAC setup? [ID 1129203.1]
In A PCP/RAC Configuration, How To Find Out On Which RAC Instance FNDSM Is Currently Running? [ID 1089396.1]
Thanks,
Hussein

Migrating from single-node to multi-node (2 Node)

Hi,
We have decided to migrate our existing 11.5.9 application from single-node to 2 Node(multi-node). Please let me know what services should reside on each node (Recommended by Oracle).
Forms, Reports, Apache on one node and CM, Admin, DB on another ?
(or)
DB on one node and all other on another node ?
And please let me know the steps I should follow to achieve the task as well.
Thank & Regards,
Abdullah

Hi;
I suggest please review our previous posts and check notes:
shared appltop/distributed appltop
Re: two nodes
In R12 shared appltop/distributed appltop
shared appltop -Which node
Re: shared appltop
Shared appltop in R12
Shared appltop in R12
shared APPL TOP or shared application
shared APPL TOP or shared application
Regard
Helios

EBS 11.5.10.2 Merge Multi Node to Single node.

Similar Messages

Maybe you are looking for