EBS 12.0.6 Upgrade to 12.1.1 Error

Hi all,
I'm on the midst of applying the patchset 7303030. At the end of the patch, I seen this error message saying:
The following Oracle Forms objects did not generate successfully:
fv forms/US FVXBEDBD.fmx
Hope someone can help me.
OS version Redhat 5(32bit) both apps ang database.
Regards,
cmadiam

Thanks again Hussein for your prompt response. I did try to rerun the patch using adpatch. Now, i have a failing worker. Here it is,
ATTENTION: All workers either have failed or are waiting:
FAILED: file fvfs.odf on worker 1.
I believe I encountered this but i just cancel/quit the worker using adctrl.
What should I do?Check the failed worker log file for details about the error.
You may also review these docs.
Attempt To Apply Patch 10148895 Fails With Error: fv_finance_charge_grp_hdrs_s.nextval ORA-02289: sequence does not exist [ID 1284941.1]
Applying Patch 12362963 Fails With "PL/SQL: ORA-00904: "Prorate_charge": Invalid Identifier" and ORA-02289: sequence does not exist [ID 1338167.1]
Thanks,
Hussein

Similar Messages

IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602

ECC 6 SR3 upgrade I am getting following error at RSVBCHCK

2EETQ241 Errors found in logfiles - accumulated in file "PSVBCHCK.ELG"
1EETQ203 Upgrade phase "JOB_RSVBCHCK_D" aborted with errors
1 ETH010XRSVBCHCK: Check of open update requests
2EETG050 Update records still exist - Please process.
There is no SM13 nor SMQ1 entries in the system, also reorganiezed update records, also checked following.
SQL> select * from sapr3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBMOD;
no rows selected
SQL> select * from SAPR3.VBHDR;
no rows selected
SQL>
Incase anyone had faced similar issues, and found a workarond please let me know
thanks.

Hi Mathew,
Please check if your system has the ABAP program "RMCEXCHK" as per OSS Note no. 1083709.
Once you run this program, it exactly would let you know what are the areas which are causing the issues. Based on that you can empty out the LIS Set up tables.
Also, can you please check the update program for LIS has emptied out the entries in SMQ1.
Regards,
Anil

OBIEE/EBS R12 - works, except for one user - ORA-06512 error

OBIEE 10.3.1.4 / EBS 12.0.4
Oracle 11g
HPUX 11.31 64 bit Itanium
We are successfully using EBS integration with OBIEE, but for one user that we have created it doesn't work. When they try to access OBIEE from EBS we get this error in NQServer.log:
*[nQSError: 13011] Query for Initialization Block 'EBS Security Context' has failed.*
*[nQSError: 17001] Oracle Error code: 6510, message: ORA-06510: PL/SQL: unhandled user-defined exception*
ORA-06512: at "APPS.APP_SESSION", line 313
at OCI call OCIStmtExecute: call / 101507300 */ APP_SESSION.validate_icx_session('NIOWQbvOlCFpGilcGDvlBIY-:S').*
*[nQSError: 17011] SQL statement execution failed.*
This is when the query is run against EBS to authenticate the user:
select FND_GLOBAL.RESP_ID,
FND_GLOBAL.RESP_APPL_ID,
FND_GLOBAL.SECURITY_GROUP_ID,
FND_GLOBAL.RESP_NAME,
FND_GLOBAL.USER_ID,
FND_GLOBAL.EMPLOYEE_ID,
FND_GLOBAL.USER_NAME from dual
It is only for one user that has the problem. All others users work fine.
Has anyone else seen this problem?
Our EBS DBA has checked that the above sql can be run with the session set to the problem user, and compared with a user who can successfully connect to OBIEE. The results were the same for both.

I was on the wrong lines with this one.
The error in the NQServer.log was not from the problem user, it was a separate user.
The real cause of a specific user not being able to login was a corrupt web catalog (which we're still trying to resolve)

Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16

Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
Regards

Script returns the same error.
System databases:
1   1   760   -1   10   1048578   0   1   master       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2   0   12768   -1   10   1048642   0   1   mastlog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1   1   1024   -1   10   1048578   0   2   tempdev       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2   0   64   -1   10   1048642   0   2   templog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1   1   288   -1   128   2   0   3   modeldev   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2   0   4464   -1   10   1048642   0   3   modellog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1   1   28936   -1   10   1048578   0   4   MSDBData   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2   0   3352   268435456   10   1048642   0   4   MSDBLog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
       SELECT physical_name
       FROM master.sys.master_files
       WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue.

Following the recent iTunes upgrade I am getting two error messages (-42404) and (-50). Any ideas how to rectify?

Using iTunes for the first time since the upgrade I am plagued with error messages - one telling me that a required component is not installed (-42404) and a second that my iTunes store request cannot be completed (-50). I've reset my old iPod as the message tells me but am reluctant to do that on my iPhone and risk loosing content. I've uninstalled and reinstalled iTunes but it's made no difference. Any ideas how to fix please?

Disable your firewall/security software.

ISA550 After upgrade 1.2.17 many error messages in the log

Hi,
After upgrade> 1.2.17 many error messages in the log
Hello,
after upgrading from 1.2.15> 1.2.17 have infinitely many errors in the log:
Err - System: sdsd: msgq_open: Error: mq_open () failed on msg queue / sdsd, errno = 2
Err - System: sdsd: open_control_msgq: Failed to open sdsd control message queue, errno = 2 (No such file or directory)
These errors occur repeatedly (300 times per minute). So I went back to the FW 1.2.15.
Does anyone have an idea?
Thanks and regards
Claus

Hi John,
Has this issue been resolved yet ?
I'm facing the same issue after upgrading to 1.2.18
11/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
Please let me know how to make this go away.
What are these errors about anyway ?? What causing it ??
Thanks
Lutfi
2013-11-11 10:42:29
Error
System
sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
2013-11-10 12:42:59
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 12:42:59
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-10 12:42:58
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-10 00:22:57
Error
System
sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 00:22:57
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
2013-11-10 00:22:56
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-09 18:43:17
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-09 18:43:16
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-09 18:43:16
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 11011/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 1

When upgrading quicktime, I get an error code: -3, and itunes will not run.

when upgrading quicktime, I get an error code: -3, and itunes will not run. How do I fix?

i 'm very interest because on 3 PC , i have the same problem and i work at tv producer...

CiscoWorks won't start after LMS upgrade 3.0 - 3.2 ERROR 502 Bad Gateway in Portal

I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.
The upgrade was successful, with no errors, and all services started.
Can anyone help, and check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.
I add the installation log file;
And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.
He added the logs generated by the LMS services Tomcat and Apache

Hi,
Here are the various errors/warning I found while looking through the attached logs.
WARNING:The application that you are installing requires new tasks to be
WARNING:registered with ACS. If you have already registered this application
WARNING:with ACS from another server, you do not need to register it again.
WARNING:However if you re-register the application, you will lose any custom
WARNING:roles that you had created earlier for this application in ACS.
WARNING:Some features in ACS may not work correctly on Dual-stack servers.
Warning: System memory is less than the minimum requirement.This may affect performance.
Warning: Current swap space is less than the minimum requirement. This may affect performance.
WARNING: The available RAM is 4086 MB which is lesser than the required RAM of 4096 MB. User chose to continue the installation
WARNING: Domain Name is not found from TcpIp parameters, setting PX_FQDN same as PX_HOST
INFO: User Selected to Reboot the Machine
Installation Completed at 16:38:06
Nov 23, 2012 7:59:11 PM org.apache.tomcat.util.threads.ThreadPool$ControlRunnable run
SEVERE: Caught exception (java.lang.NoClassDefFoundError) executing org.apache.jk.common.ChannelSocket$SocketConnection@d888c7, terminating thread
[warn] RSA server certificate CommonName (CN) `LOND-CW-MDF-1' does NOT match server name!?
[Fri Nov 23 19:19:46 CST 2012] CMFX - fileLoc is \C:\PROGRA~1\CSCOpx\lib\classpath\md.properties
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =LOND-CW-MDF-1
Cookie value is invalid
LTGateway.run(): connection to LWMS failed, trying again, Nov 23 19:22:28
You have a BUNCH of the ChannelSocket$SocketConnection exceptions.
The next step for you:
Check the running processes via cmd line (pdshow -brief).
Check that all processes are running as expected. If they are then take a look at what is keeping ports open on your box (netstat -anob). From above, the reason may be an application occupying a port LMS needs. Also check the Windows error logs.
Check the following services, they should look like:
Ciscoworks ANI database engine :Manual
CiscoWorks Daemon Manager :Auto
CiscoWorks RME NG database :Manual
CiscoWorks Tomcat Servlet engine : Manual
CW VisiBroker Smart Agent :Manual
CiscoWorks Web Server :Manual
CWCS Cmf database engine :Manual
CWCS rsh/rcp service :Auto
CWCS syslog service :Auto
CWCS tftp service :Auto
DFM dfmEpm :Manual
DFM dfmFh :Manual
DFM dfmInv :Manual
4. Log in as the local Administrator (not Domain).
Stop daemons (net stop crmdmgtd)
CSCOpxMDC\Apache\perl ConfigSSL.pl -disable
CSCOpx\MDC\Apache\perl ConfigSSL.pl -enable (Answer when prompted)
navigate to ..\NMSROOT\setup\support
Execute resetCasuser.exe
Start Daemons (net start crmdmgtd) and wait 20 minutes.
Check if condition persists.
5. Check the output of ..\NMSROOT\MDC\Apache\bin>pdreg -l Apache
A couple other things:
Set the server name to be the server name with the domain as well.
Set the primary DNS suffix to match
Modify md.properties & Registry & set PX_FQDN to the above.
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
- HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\ResourceManager\CurrentVersion\Environment
Thanks.

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!?

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to CS5. Can anyone assist

Contact serial number support by web chat.
Mylenium

Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so? Help?

Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so? Help?

There is a chance the spreadsheets were made with a Numbers or AppleWorks version so old that it's not compatible anymore with the latest Numbers version (yes this can happen)

Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors

Hi ,
Need some assistance. Logged message with SAP AG, still waiting for response.Anyone that can assist will be appreciated. Error from logs.
/usr/sap/put/log# more SEDCORG.LOG
1 ETQ201XEntering upgrade-phase "SQLSCREXE_ALI_ORG" ("20061108125644")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=1
4 ETQ380 computing toolpath for request "TP_EXECDBSCRIPT_NEW"
4 ETQ381 request "TP_EXECDBSCRIPT_NEW" means "execdbscript with 46A feature"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ276 Executing SQL-script "ALORDC.XQL"
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/exe
4 ETQ399 ext. env.: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131
/jre/bin:/usr/java131/jre/bin/classic
4 ETQ399 2006/11/08 12:56:44: put_execute: (tp) forkpid:97258
2EETQ278 Errors during execution of SQL-script "ALORDC.XQL"
1EETQ203 Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors ("20061108125645")
Checked TPSQLSTD.OUT log
/usr/sap/put/log# more TPSQLSTD.OUT
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 97258 at 20061108125644
ENV <0x2ff22d14>: dbms_type=ORA
ENV <0x2ff22d22>: dbs_ora_tnsname=BB1
ENV <0x2011c290>: dbs_ora_schema=SAPR3
ENV <0x2ff22d4b>: ORACLE_PSRV=BB1
ENV <0x2ff22d5b>: ORACLE_SID=BB1
ENV <0x2ff22d75>: ORACLE_HOME=/oracle/BB1/102_64
ENV <0x2ff22d94>: ORACLE_BASE=/oracle
ENV <0x2ff22da8>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
ENV <0x2ff22ddf>: NLS_LANG=AMERICAN_AMERICA.US7ASCII
ENV <0x20147368>: DIR_LIBRARY=/usr/sap/put/exe
ENV <0x2014864c>: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131/j
re/bin:/usr/java131/jre/bin/classic
ENV <0x2011be90>: auth_shadow_upgrade=1
EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL
This is /usr/sap/put/exe/tp version 370.00.09 (release 700)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
2EETP000 sap_dext called with msgnr "2":
2EETP000 -
db call info -
2EETP000 function:   db_ntab
2EETP000 fcode:      NT_RDTDESCR
2EETP000 tabname:    TADIR
2EETP000 len:        5
2EETP000 key:        TADIR
2EETP000 retcode:    2
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 97258
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0200
tp finished with return code: 200
meaning:
ERROR: see tp's stdout (Standard Out may not be available)
Process with ID 97258 terminated with status 200
History : Original problem was related to environment variables for DIR_LIBRARY. Resolved that issue; UaGui was started as root and not the <sid>adm user. UaServer was started as correct user. Killed session and logged on as <sid>adm restarted UaGui as the correct user. Now this error comes up, SAPup won't allow me continue or retry
Replaced tp, r3trans and SAPup tools. Also when I run the cmd /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL in a seperate session, it completes successfully and creates the necessary views as described in ALORDC.XQL. I checked the ALORDC.LOG to confirm this.
Kind Regards,
Ricky Padayachee

Hi John,
The problem I had was wrong environment when starting the Uagui and Uaserver, must be started as adm user. I also restarted the installation from scratch...
I had an issue with a duplicate database object, SVERS in my case. I dropped the object not required and restarted phase, went through fine.
Let me know, how it goes.
Regards,
Ricky

HT1947 After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

Hey gwscrt,
Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
I would read the document in full, but here are the applicable steps for you:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Have a good one,
David

Can't upgrade to XI from 9. error always occurs and it tells me to contact software manufacturer for assistance by sassy lassies

How can I eliminate the error that prevents me from upgrading from 9.0 to 11.0 The message always says contact the software manufacturer for assistance but so far, no help. I have an iMac.

That wouldn't be an adobe error.
Can you tell us how you are upgrading and exactly what the error message says? Right off the bat I would say you have malware on your system.

EBS 12.0.6 Upgrade to 12.1.1 Error

Similar Messages

Maybe you are looking for