EBS 2008 Console and SCE 2007 Crashes

Hello,
We recently had an issue where the EBS (Essential Business Server) 2008 Console started crashing. We were able to identify that the OperationsManager database was exceeding the SQL Server Express 2005 DB limit. We referenced the article How
to Maintain and Reduce the Amount of Data Stored in the Systems Center Essentials Databases
http://blogs.technet.com/b/essentialbusinessserver/archive/2010/05/03/how-to-maintain-and-reduce-the-amount-of-data-stored-in-the-systems-center-essentials-databases.aspx
We also found that database size did not decrease and used scripts to reduce the LocalizedText database as it was very large. Since the cleanup we continue to have Event Logs referring to failed inserts and also problems with the RunAs account. All
of the KB articles refer to solutions that require changes in the SCE Console, but the SCE 2007 Console crashes after attempting to run on our EBS 2008 Management server.
How can we resolve our issues if we cannot start the console?

Hi,
Have you checked if event CLR20r3 in the application log? If so, would you please provide detailed information about the error? In addition, have you uninstalled WSUS before? If so, I suspect
it’s because Windows Server Update Service was uninstalled. I suggest we could do a replacement mode install of Management Server. Please perform the following steps to see if it works.
1. Install the management server using the EBS management disk
2. Begin the installation of the EBS Management server and stop once you reach the EBS setup (OOBE) wizard.
3. Press Shift+F10 to open a command shell. From here, install the EBS Preparation and Planning tools, but *DO NOT launch them* after they are installed.
4. Replace WsusSetup.exe with the SP2 version using the following steps.
5. Download the WSUS 3 SP2 x64 version. You can get it here.
6. Rename the downloaded package from WSUS30-KB972455-x64.exe to WSUSSetup.exe
7. Rename C:\Program Files\Windows Essential Business Server\Bin\SCE\Setup\AMD64\WSUSSetup.exe to C:\Program Files\Windows Essential Business Server\Bin\SCE\Setup\AMD64\WSUSSetup.old
8. Copy the new WSUS package to C:\Program Files\Windows Essential Business Server\Bin\SCE\Setup\AMD64\
9. Replace the WSUS_HOTFIX with an update for the Preparation and Planning wizard using the following steps.
10. Rename C:\Program Files\Windows Essential Business Server\bin\WSUS_HOTFIX\KB954960_x64.msp to KB954960_x64.old.
11. Download the KB 977195 update for the Preparation and Planning wizard to the server. Shortcut here.
12. Extract the MSP from the CAB and rename it to KB954960_x64.msp. Copy this KB954960_x64.msp file into the folder C:\Program Files\Windows Essential Business Server\bin\WSUS_HOTFIX\ .
13. Close the command shell and continue with the EBS Management setup. Select NO to updates.
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Similar Messages

DESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashing

LDESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashingRHi all. Hoping someone out there can help; I've been going around in circles for far too long on this.
Exec summary:
WinXP, SP3, Audio finally is working, Creative Console launches but crashes consistently. Diagnostics fails, on-screen could not install.
System:
WinXP, SP3
Story
I had an original X-Fi card that came with my Dell XPS70 3 years ago. Working perfectly, until I upgraded to WinXP, SP3 (from SP2).
BAM - lots of BSODs, always in ha20x2k.sys. Many times, all networking would just stop, and the BSOD would happen when shutting down the computer. Networking would fail 00% everytime I watched any kind of video (news, youtube, whatever).
Couldn't find more current drivers, bought X-Fi ExtremeGamer card from Frys. Could not get this to install off the package CD, new card was not recognized by Windows. Install would always hang on "On-Screen display" (I have a dual monitor system - should that matter?)
Eventually, downloaded more current drivers and console app from the Creative website and got audio working. Console will now launch but the moment I try to change something in the EQ panel, the console crashes, 00% of the time. Other Creative apps (e.g. diagnostics) fail with this error:? "The audio device supported by this application may not be present or may be operating in an unsupported mode..."
I haven't been able to "cleansweep" my system, the link in this (Creative) forum is broken.
REALLY hoping someone can help get this working... Have spent 2 days away from business to try to make this work properly, and am out of things to try.
Thanks,
Jerry

I should add - I have NO interest in gaming, just looking for high-end audio...

5.1 Admin Console and Excel 2007

We previously had Excel 2003 and are in the process of upgrading to 2007. We are getting errors making changes to dimensions in the admin console. Whenever we try to process a dimension, we get an error that says "external table is not in the expected format". Is it possible to set up the 5.1 Admin console to work with Excel 2007?
Thanks,
Blake

Dear Blake Thomas,
Of course, You could use the Ms.Excel 2007 in BPC Admin Console and BPC Excel. One thing you should to know, you should to upgrade your SAP BPC 5.1 with latest SP before. Please you download the latest SP in website SAP marketplace [http://service.sap.com/instguidesEPM-BPC] . If you have upgraded it, you will see the window of confirmation which will ask you use Ms.Excel 2003 or Ms.Excel 2007 for once
Best Regards,
Wandi Sutandi

Windows Server 2008 SBS and Office 2007

Hello, the problem I am having is having Safe Senders and Safe Recipients imported into Outlook 2007 SP2 from group policy. It simply won't append the list. The environment is the following:
Clients: Windows XP Professional with SP3 installed. MS Office 2007 with SP2 installed.
Server: Windows 2008 SBS with SP2 installed.
What I have setup and tried:
1. Installed the ADMX files correctly on the server and created a GPO with the Outlook settings I need:
- Specify path to Safe Senders and Recipients files. Location: \\SERVER\netlogon\SafeSenders.txt
2. Attached the GPO to the correct OU (users are in the OU).
3. Installed the client side extensions from this link: http://www.microsoft.com/en-us/download/details.aspx?id=3628 on the Windows XP machines.
Even after setting this up the lists still will not import into Outlook 2007. What I have tried and other notes:
- Clients have access to the \\SERVER\netlogon share area. Verified through Windows Explorer.
- Tried forcing group policy update using gpupdate /force No results.
- Tried logoff and reboot combinations on client machines and still no results.
- gpresult returns the GPO is applied (but clearly it's not working).
New to setting this up to Windows XP clients, works on Windows 7 clients flawlessly. Ideas? Solutions? Thanks.
Rob Holmes

Hi Rob Holms,
Based on Donpick's suggestion, if the issue still exists, you can try to enable GPSV debug logging on one client with the problematic clent. This log records the detailed information about the group policy applying process which is very useful for troubleshooting
the group policy related issues. To enable this debug logging, please perform the following steps:
1). In the Regedit Editor, expand HKLM\Software\Microsoft\Window NT\CurrentVersion.
2). Under the folder, create a new key called “Diagnostics”.
3). Under the key, create a DWORD value “GPSvcDebugLevel” and set the value as
0x30002.
After making this change, run gpupdate /force to reproduce the issue. After that, check %SystemRoot%\Debug\UserMode\ folder and analyze the log to get more help.
Regards,
Lany Zhang

SBS 2008 Console crashing on Network tab

On a Windows Server 2008 FE (known as SBS 2008) I have a weird problem. The SBS Console crashes on the Network Tab. I've read a lot about this issue on the Technet forums, but have not yet come to the solution.
When I click on the Network tab, I get this error:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: console.exe
Problem Signature 02: 6.0.5601.8540
Problem Signature 03: 502b0c6b
Problem Signature 04: Console
Problem Signature 05: 6.0.0.0
Problem Signature 06: 502b0c6b
Problem Signature 07: f9b
Problem Signature 08: 29
Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
OS Version: 6.0.6002.2.2.0.305.9
Locale ID: 1043
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
The console.log
[13924] 140627.175033.5433: General: Initializing...C:\Program Files\Windows Small Business Server\Bin\console.exe
[13924] 140627.175035.2705: General: Console shown...
[13924] 140627.175037.7077: AdminTME: Committer: RunAsync TaskPurgeBadADObjects
[13540] 140627.175037.7297: AdminTME: AdminDataLink Running Task: TaskPurgeBadADObjects
[13540] 140627.175038.0347: AdminTME: Status: TaskId = TaskPurgeBadADObjects, RootTaskId = TaskPurgeBadADObjects, Success: True, Warning: False, Continue: True, Message:
[13924] 140627.175038.3288: AdminTME: Committer: Completed called
[13924] 140627.175038.3288: AdminTME: Committer: Committer Completed.
[13540] 140627.175038.3748: Security Plugin Infrastructure: SecurityManager : Initializing SecurityManager
[13540] 140627.175038.3748: Security Plugin Infrastructure: SecurityManager : Number of plug-ins discovered : 5
[13540] 140627.175038.3818: Security Plugin Infrastructure: SecurityManager : Loading plug-in file : C:\Program Files\Windows Small Business Server\Data\SHExtensions\Antimalware.xml
[11248] 140627.175038.4748: Exception:
An exception of type 'Type: Microsoft.UpdateServices.Administration.WsusInvalidServerException, Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Culture=neutral, PublicKeyToken=31bf3856ad364e35' has occurred.
Timestamp: 06/27/2014 17:50:38
Message: Exception of type 'Microsoft.UpdateServices.Administration.WsusInvalidServerException' was thrown.
Stack: at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
at Microsoft.WindowsServerSolutions.SystemHealth.UpdateServices.DataProvider.InitializeWSUSDataLayer()
at Microsoft.WindowsServerSolutions.SystemHealth.UpdateServices.DataProvider..ctor()
at Microsoft.WindowsServerSolutions.Console.Controls.ReportCard.ReportCard.GetUpdatesHealthInfo(LEDstates& ledState, String& reportDescription)
[13540] 140627.175038.8188: Security Plugin Infrastructure: SecurityManager : Adding feature Virus protection for file system from plug-in C:\Program Files\Windows Small Business Server\Data\SHExtensions\Antimalware.xml
[13540] 140627.175038.8208: Security Plugin Infrastructure: SecurityManager : Adding feature Spyware and other malware protection from plug-in C:\Program Files\Windows Small Business Server\Data\SHExtensions\Antimalware.xml
[13540] 140627.175038.8208: Security Plugin Infrastructure: SecurityManager : Loading plug-in file : C:\Program Files\Windows Small Business Server\Data\SHExtensions\ClientFirewall.xml
[13540] 140627.175038.8228: Security Plugin Infrastructure: SecurityManager : Adding feature Client computer firewall from plug-in C:\Program Files\Windows Small Business Server\Data\SHExtensions\ClientFirewall.xml
[13540] 140627.175038.8238: Security Plugin Infrastructure: SecurityManager : Loading plug-in file : C:\Program Files\Windows Small Business Server\Data\SHExtensions\E12AntiSpam.xml
[13540] 140627.175040.0950: Security Plugin Infrastructure: SecurityManager : Adding feature Spam protection for e-mail from plug-in C:\Program Files\Windows Small Business Server\Data\SHExtensions\E12AntiSpam.xml
[13540] 140627.175040.0950: Security Plugin Infrastructure: SecurityManager : Loading plug-in file : C:\Program Files\Windows Small Business Server\Data\SHExtensions\FSE.xml
[13540] 140627.175040.6840: Security Plugin Infrastructure: SecurityManager : Adding feature Virus protection for e-mail from plug-in C:\Program Files\Windows Small Business Server\Data\SHExtensions\FSE.xml
[13540] 140627.175040.6840: Security Plugin Infrastructure: SecurityManager : Loading plug-in file : C:\Program Files\Windows Small Business Server\Data\SHExtensions\WindowsFirewall.xml
[13540] 140627.175040.6870: Security Plugin Infrastructure: SecurityManager : Adding feature Server firewall from plug-in C:\Program Files\Windows Small Business Server\Data\SHExtensions\WindowsFirewall.xml
[11640] 140627.175041.3551: Antimalware Reporting: Thread ID : 9 : AntivirusHealthCheck : Number of clients detected : 11
[11428] 140627.175041.3781: Antimalware Reporting: Thread ID : 11 : AntispywareHealthCheck : Number of clients detected : 11
[13540] 140627.175041.4541: Security Plugin Infrastructure: ClientFirewallDetailGroup : Detected Firewall Status. Client : WP2013-01.nai.local, Status : Unknown
[13540] 140627.175041.4881: Security Plugin Infrastructure: ClientFirewallDetailGroup : Detected Firewall Status. Client : WP2013-04.nai.local, Status : Unknown
[13540] 140627.175041.4981: Security Plugin Infrastructure: ClientFirewallDetailGroup : Detected Firewall Status. Client : WP2013-11.nai.local, Status : Unknown
[13540] 140627.175041.5211: Security Plugin Infrastructure: ClientFirewallDetailGroup : Detected Firewall Status. Client : WP2013-05.nai.local, Status : Unknown
[13540] 140627.175041.5281: Security Plugin Infrastructure: ClientFirewallDetailGroup : Detected Firewall Status. Client : WP2013-09.nai.local, Status : Unknown
[13540] 140627.175041.5351: Security Plugin Infrastructure: ClientFirewallDetailGroup : Detected Firewall Status. Client : WP2013-08.nai.local, Status : Unknown
[11248] 140627.175042.1732: Antimalware Reporting: Client : NAI-001.nai.local, Thread ID : 6 : AntimalwareReport : Client is not in antimalware framework client list : NAI-001.nai.local
[11248] 140627.175042.1752: Antimalware Reporting: Client : NAI-001.nai.local, Thread ID : 6 : AntimalwareReport : Client is not in antimalware framework client list : NAI-001.nai.local
[3312] 140627.175042.5602: ClientSetup: Microsoft.UpdateServices.Administration.WsusInvalidServerException: Exception of type 'Microsoft.UpdateServices.Administration.WsusInvalidServerException' was thrown.
at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
at Microsoft.WindowsServerSolutions.SystemHealth.UpdateServices.DataProvider.InitializeWSUSDataLayer()
at Microsoft.WindowsServerSolutions.SystemHealth.UpdateServices.DataProvider..ctor()
at Microsoft.WindowsServerSolutions.Console.Pages.Computers.Computers.QueryCompUpdateJob.SetUpdateCompliance()
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
[3312] 140627.175042.5612: Admin: !!!!FATAL: Console shutting down due to unhandled exception: Exception has been thrown by the target of an invocation.
[3312] 140627.175042.5632: Exception:
An exception of type 'Type: System.Reflection.TargetInvocationException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 06/27/2014 17:50:42
Message: Exception has been thrown by the target of an invocation.
Stack: at Microsoft.WindowsServerSolutions.Console.Pages.Computers.Computers.QueryComputerJob.OnCompleted(Object sender, RunWorkerCompletedEventArgs e)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
An exception of type 'Type: Microsoft.UpdateServices.Administration.WsusInvalidServerException, Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Culture=neutral, PublicKeyToken=31bf3856ad364e35' has occurred.
Timestamp: 06/27/2014 17:50:42
Message: Exception of type 'Microsoft.UpdateServices.Administration.WsusInvalidServerException' was thrown.
Stack: at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
at Microsoft.WindowsServerSolutions.SystemHealth.UpdateServices.DataProvider.InitializeWSUSDataLayer()
at Microsoft.WindowsServerSolutions.SystemHealth.UpdateServices.DataProvider..ctor()
at Microsoft.WindowsServerSolutions.Console.Pages.Computers.Computers.QueryCompUpdateJob.SetUpdateCompliance()
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
[12392] 140627.175042.6282: ClientSetup: NetGetJoinInformation (server = [WP2013-07], ...)
[12392] 140627.175042.7202: ClientSetup: NetGetJoinInformation (server = [WP2013-03], ...)
[14260] 140627.175042.7202: ClientSetup: Computer [WP2013-07] - JoinStatus: [NetSetupDomainName], DomainName: [NAI], Expect: [NAI]
[13732] 140627.175042.8162: ClientSetup: Computer [WP2013-03] - JoinStatus: [NetSetupDomainName], DomainName: [NAI], Expect: [NAI]
[12392] 140627.175042.8162: ClientSetup: NetGetJoinInformation (server = [WP2013-10], ...)
[12392] 140627.175042.8812: ClientSetup: NetGetJoinInformation (server = [WP2013-02], ...)
[13636] 140627.175042.8812: ClientSetup: Computer [WP2013-10] - JoinStatus: [NetSetupDomainName], DomainName: [NAI], Expect: [NAI]
[12392] 140627.175042.9392: ClientSetup: NetGetJoinInformation (server = [WP2013-06], ...)
[12296] 140627.175042.9392: ClientSetup: Computer [WP2013-02] - JoinStatus: [NetSetupDomainName], DomainName: [NAI], Expect: [NAI]
[11476] 140627.175042.9962: ClientSetup: Computer [WP2013-06] - JoinStatus: [NetSetupDomainName], DomainName: [NAI], Expect: [NAI]
[5720] 140627.175043.5143: ClientSetup: GetComputerStatus (WP2013-01.nai.local) SendPing false
[5720] 140627.175043.5163: CoreNet: ARPCanResolveIP called with null==source -- SendARP will have to determine the Nic
[14260] 140627.175044.0143: ClientSetup: GetComputerStatus (WP2013-08.nai.local) SendPing false
[14260] 140627.175044.0143: CoreNet: ARPCanResolveIP called with null==source -- SendARP will have to determine the Nic
[8804] 140627.175045.0144: ClientSetup: GetComputerStatus (WP2013-05.nai.local) SendPing false
[11136] 140627.175045.0144: ClientSetup: GetComputerStatus (WP2013-11.nai.local) SendPing false
[8804] 140627.175045.0144: CoreNet: ARPCanResolveIP called with null==source -- SendARP will have to determine the Nic
[12244] 140627.175045.0144: ClientSetup: GetComputerStatus (WP2013-04.nai.local) SendPing false
[12244] 140627.175045.0144: CoreNet: ARPCanResolveIP called with null==source -- SendARP will have to determine the Nic
[11136] 140627.175045.0144: CoreNet: ARPCanResolveIP called with null==source -- SendARP will have to determine the Nic
On the services.msc i see that the following services are not started:
SQL Active Directory Helper
SQL Server Agent (SQLEXPRESS)
SQL Server Browser
Windows Internal Database (MICROSOFT##SSE)
When i try to start the SQL Active Directory Helper, i get the following message:
Windows could not start the SQL Server Active Directory Helper on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code -1073741724.
When i try to start the SQL Server Agent(SQLEXPRESS) and SQL Server Browser, i receive the following message:
The <SERVICE_NAME> service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
When i try to start the Windows Internal database, i receive the error:
Windows could not start the Windows Internal Database(MICROSOFT##SSEE) service on Local Computer.
Error 1067: The process terminated unexpectedly.
The system log records the message:
Log Name: System
Source: Service Control Manager
Date: 27-6-2014 18:11:32
Event ID: 7034
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NAI-001.nai.local
Description:
The Windows Internal Database (MICROSOFT##SSEE) service terminated unexpectedly. It has done this 5 time(s).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908D1-A6D7-4695-8E1E-26931D2012F4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7034</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T16:11:32.000Z" />
<EventRecordID>694617</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>NAI-001.nai.local</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Windows Internal Database (MICROSOFT##SSEE)</Data>
<Data Name="param2">5</Data>
</EventData>
</Event>
I have replace those folders, form an sbs server with the same OS where the console still works:
C:\Program Files\Windows Small Business Server\bin
C:\Program Files\Windows Small Business Server\Data
I think these services are related to WSUS and WSUS is related tot SBS Console. Do i have to re-install WSUS? reinstallation of WSUS on a SBS server, I think that is very risky. What do you think?
Sincerely, Martien van Dijk -------------------------------------------------------------------------------- Please remember to mark the replies as answers if they help and unmark them if they provide no help. Check out
My Blog!

Hi,
Sorry for my delay.
àWindows Internal
Database (Microsoft##SSEE)
àI think these
services are related to WSUS and WSUS is related tot SBS Console.
Based on those error messages, I will agree with your viewpoint. This issue seems to be related to WSUS.
On current situation, please refer to following operations and check if can help you.
1. Run
SBS BPA and check if can find some issues, then solve them.
2. Please refer to the following article and repair Windows Server Update Services, then monitor the result.
Repair Windows Server Update Services
3. If this issue still exists, please
repair SBS 2008 console and check if can help you.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

SBS 2008 - SBS Console and AD errors after migration to new hardware

Hi there,
I'm trying to work out how to fix some of the errors and random behaviour I'm experiencing with the SBS 2008 console and AD related matters since I had to quickly migrate SBS 2008 to new hardware using Windows Server Backup after a failure of the old server.
In my haste to get our email and ftp services back up and running (which use Smartermail and Filezilla respectively instead of Exchange etc) I overlooked the fact that the new server had 3 NICs installed and not one and so restored SBS 2008 and loaded up new
drivers for those and other hardware that had changed (such as the graphics card and mobo. I have since removed the two additional NICs by disabling them on the mobo).
Whilst I got the server up and running again with email and ftp services, even though I currently don't use any AD related stuff directly I have since noted that if I try to say view a list of users that I had previously created via the SBS console, more often
than not it will show no users, and then randomly it will (but when you do see them you can't edit or delete them. I'm aware that I have probably broken a number of golden rules in doing this 'migration' but having a metaphorical gun to my head meant that
I rushed things out of desperation.
Common errors that I experience generally will say things like 'Current security connect is not associated with an Active Directory domain or forest' if I try to list users, or DC not found for domain "xyz.local' etc. I have been searching the net and
trying out some things to fix this but I'm like a dog chasing its tail as I'm not so clued up on server related issues as I am with workstation problems, so if anyone could at least point me in the right direction I would be very grateful. If you require any
info from me (eg diag logs etc) I will be happy to provide them!
Regards,
Dave

Hi Dave,
Based on current situation, please run SBS BPA and fix all that it can find, then monitor the result. For more details, please refer to the following KB.
Windows SBS Best Practices Analyzer (BPA)
Meanwhile, please refer to the following article and repair SBS console.
Repair the Windows SBS 2008 Console
By the way, I noticed that you had got some error messages (such as: “DC not found for domain” and so on). Would you please let me know complete error messages? In addition, when you migrate SBS 2008 to the new hardware, had you done any preparation for
that Source Server? For more details, please refer to the following article.
Migrate Windows Small Business Server 2008 to New Hardware
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

SBS 2008 and Exchange 2007 intermittent Email Issues

Hello
I am having an issue with my SBS 2008 Server and Exchange 2007. After setup, the mail seems to work great for about a week, then the mail just quits working. To get it working again, all I have to do is reboot the server and mail starts working
again. When looking in the event logs, all I come across is transport.exe errors. Any ideas on why it works for 5-10 days, then just quits working? Any help or insight would be much appreciated.
Thanks All

Larry
Here are some of the errors that i am getting:
(Event ID 1022) (Source MSExchangeIS Mailbox Store)
Logon Failure on database "First Storage Group\Mailbox Database" - Windows account NT AUTHORITY\NETWORK SERVICE; mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Josh.Lange.
Error: -1069
Client Machine: SERVERNAME
Client Process: edgetransport.exe
Client ProcessId: 0
Client ApplicationId: Client=Transport
(Event ID 1022) (Source MSExchangeIS Mailbox Store)
Logon Failure on database "First Storage Group\Mailbox Database" - Windows account NT AUTHORITY\SYSTEM; mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SERVERNAME/cn=Microsoft System
Attendant.
Error: -1069
Client Machine: SERVERNAME
Client Process: Microsoft.Exchange.ServiceHost.exe
Client ProcessId: 0
Client ApplicationId: Microsoft System Attendant Service Let
(Event ID 1022) (Source MSExchangeIS Mailbox Store)
Logon Failure on database "First Storage Group\Mailbox Database" - Windows account WIS\JLange; mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Josh.Lange.
Error: -1069
Client Machine: SERVERNAME
Client Process: w3wp.exe
Client ProcessId: 0
Client ApplicationId: Client=ActiveSync;UserAgent=Apple-iPhone5C1/1002.329;Action=User=jlange&DeviceId=ApplF18KM7FHFH1C&DeviceType=iPhone&Cmd=Sync
These are a few errors that i get when the mail isn't working. When it stops of the server, the outlook clients show the exchange server disconnected, and active sync will not work either. I can still remote to the server, so i dont think its
an internet connectivity issue. Let me know if you have any other questions. Again, the mail seems to work for about 5-7 days, then i have to reboot the server to get the mail flowing again. Any help or direction would be appreciated.
Thanks for Looking

Word 2007 crashes during autosave and when saving as .DOC

Hi,
I have a problem with Microsoft Word 2007. It crashes every time during autosave. It also crashes when I try to save a file as .DOC (even an empty new file). When I save it as any other file type it's fine.
I have already tried repairing the office installation, reinstalling the whole suite (and then installing SP3 and all latest patches again), auto fix it from
http://support.microsoft.com/kb/822005/en-us and
http://support.microsoft.com/kb/921541/en-us, changing the autosave file location, using different windows account. None of these helped. I wouldn't like to work with autosave switched off.
I am using Windows 7 Professional SP1 and Office 2007 Professional 12.0.6683.5002 with SP3 on HP EliteBook 8470w.
-- Igor M.

Hi,
I tried to start Word in safe mode be it did not change anything. I also tried to start Windows 7 in clean boot but it did not help either (same issues).
Two entries are added to the event log when Word crashes:
First one:
ID: 0, Application Name: Microsoft Office Word, Application Version: 12.0.6683.5002, Microsoft Office Version: 12.0.6612.1000. This session lasted 94 seconds with 0 seconds of active time. This session ended with a crash.
Second one (Google translation):
Log Name : Application
Source: Application Error
Date: 2013-12-29 0:38:43
Event ID : 1000
Task Category : (100)
Level: Errors
Keywords: Classic
User : Not applicable
Computer: XXX
Description:
Name of the application causing the error: WINWORD.EXE , version : 12.0.6683.5002 , time stamp : 0x520bb457
Name of the module causing the error : wwlib.dll , version : 12.0.6683.5002 , time stamp : 0x520bb54c
Exception code : 0xc0000005
Fault offset : 0x0006d564
The process ID causing the error : 0xbb0
Time to run the application causing the error: 0x01cf0425b9f67b73
The application path causing the error: C : \ Program Files (x86 ) \ Microsoft Office \ Office12 \ WINWORD.EXE
The path of the module causing the error : C : \ Program Files (x86 ) \ Microsoft Office \ Office12 \ wwlib.dll
Report ID : 2fcdf5c7 - 7019 - 11e3 - 96f9 - 1c3e84fe29b2
Event Xml :
  "><Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    "><Provider Name="Application Error" />
    1000</EventID>"><EventID Qualifiers="0"> 1000 < / EventID >
    100</Task>"><Task> 100 < / Task >
    "><TimeCreated SystemTime="2013-12-28T23:38:43.000000000Z" />
    Application</Channel>"><channel> Application < / Channel >
    "><Security />
  "><EventData>
    12.0.6683.5002</Data>"><Data> 12.0.6683.5002 < / Data>
    wwlib.dll</Data>"><Data> Wwlib.dll < / date >
    520bb54c</Data>"><Data> 520bb54c < / date >
    0006d564</Data>"><Data> 0006d564 < / Data>
    01cf0425b9f67b73</Data>"><Data> 01cf0425b9f67b73 < / date >
    C:\Program
Files (x86)\Microsoft Office\Office12\wwlib.dll</Data>"><Date> C : \ Program Files (x86 ) \ Microsoft Office \ Office12 \ wwlib.dll < / date >
  ">< / EventData >
<span title="">< / Event >
Kind regards,

Configurations required for PME and SCE in SAP-CRM 2007

Hi Friends
How to configure the PME and SCE in SAP-CRM 2007.
If u have any documentation avilable for those two topics regading the implementation of e-Commerce application.
Waiting for ur reponse..
Regards
Satish.

Hi Mia,
Authorization group is available in the old versions and basically this help in defining new authorization groups and you can define what can be done with these authorization groups as what can be edited and what cannot be and this is done on SPRO. These authorization groups are entered in the authorization group and the user who has this authorization object will be able to work on the account.
So the business role in CRM 2007 has a PFCG role and the authorization profile that you created are assigned to the business role and users are assigned to the business role.
There are also few authorization objects to maintian the BP relationship and see if you can use these combination to check if it meets your requirement.
Hope it clarifies and if useful please reward points
Thanks
Srini

SCE SCA BB Console and Subscriber Manager problem

Hi,
I need to do a Backup/restore of Subscriber in a SCE2020 engine.
I try to connect into the SCE with SCA BB Console and Subscriber Manager tools.
I dosn't work. I can't get the backup .csv file.
+ 22.11.10 12:16:37 CET | INFO | Connecting to 192.168.1.1: Connecting to the SM
+ 22.11.10 12:16:38 CET | INFO | Connecting to 192.168.1.1: Open Subscriber Management perspective
+ 22.11.10 12:16:38 CET | INFO | Connecting to device at 192.168.1.1...
but nothing more...
Note: No problem with Reporter tools.
Any Idea ?
Thank you for your help.
Best regards.
Seb

Thanks a lot Gurus!!! now i can use SCA BB console following steps by
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Tom Debruyne
by the way i lost all mine last hosts configured there but no problem i can add them now!
Thanks Tom!!!

My Macbook Pro is running really slow and programs keep crashing

I have a 15" MacBook Pro (Mid 2010 Model) that is doing my head in, as it runs really slow most of the times as soon as I open more than one program (especially if I use Excel or Word of course). I ran the EtreCheck and the result is below, hopefully this will help some of you guide me in the right direction?
Most of my memory (over 200GB) is used up by "OTHER", any idea what that could be and how I could easily free up space?
Thanks a lot
EtreCheck version: 2.1.8 (121)
Report generated 17 April 2015 08:02:01 BST
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro6,2
    1 2.4 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 155
Video Information: ℹ️
    Intel HD Graphics - VRAM: 288 MB
    NVIDIA GeForce GT 330M - VRAM: 256 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:16:25
Disk Information: ℹ️
    Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (64.39 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    JMicron Samsung S2 Portable 1 TB
        EFI (disk2s1) <not mounted> : 210 MB
        TIME MACHINE (disk2s2) /Volumes/TIME MACHINE : 999.86 GB (70.54 GB free)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Built-in iSight
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    com.logmein.hamachi (1.0.0 - SDK 10.9) [Click for support]
        /Library/Extensions/tap.kext
    [not loaded]    foo.tap (1.0) [Click for support]
        /Library/Extensions/tun.kext
    [not loaded]    foo.tun (1.0) [Click for support]
        /System/Library/Extensions
    [loaded]    com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
    [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.67) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) [Click for support]
Startup Items: ℹ️
    tap: Path: /System/Library/StartupItems/tap
    tun: Path: /System/Library/StartupItems/tun
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.logmein.hamachimb.plist [Click for support]
    [running]    com.logmein.logmeingui.plist [Click for support]
    [running]    com.logmein.logmeinguiagent.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
    [failed]    com.rim.BBLaunchAgent.plist [Click for support] [Click for details]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.hamachix.tuncfgd.plist [Click for support]
    [running]    com.logmein.hamachi.plist [Click for support]
    [running]    com.logmein.logmeinserver.plist [Click for support]
    [loaded]    com.logmein.raupdate.plist [Click for support]
    [failed]    com.rim.BBDaemon.plist [Click for support] [Click for details]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [not loaded]    jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
    [running]    ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
    Dropbox    Application (/Applications/Dropbox.app)
    Skype    Application (/Applications/Skype.app)
    Microsoft Database Daemon    Application (/Applications/Microsoft Office 2008/Office/Microsoft Database Daemon.app)
    Spotify    Application Hidden (/Applications/Spotify.app)
    BlackBerry Device Manager    UNKNOWN Hidden (missing value)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    EPPEX Plugin: Version: 3.0.5.0 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.935 - SDK 10.7 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
    LogMeInSafari32: Version: 1.0.935 - SDK 10.7 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    Picasa: Version: 1.0 [Click for support]
Safari Extensions: ℹ️
    1Password
    Evernote Web Clipper
    WebRank SEO
Audio Plug-ins: ℹ️
    EcammAudioLoader: Version: 1.0.3 - SDK 10.8 [Click for support]
    CallRecorder: Version: v2.5.14 - SDK 10.8 [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Trusteer Endpoint Protection [Click for support]
    VLC Streamer [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 254.45 GB
    Destinations:
        SAMSUNG [Local]
        Total size: 999.86 GB
        Total number of backups: 36
        Oldest backup: 2012-04-09 11:47:32 +0000
        Last backup: 2015-02-05 20:06:09 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        11%    WindowServer
         4%    Safari
         1%    Skype
         0%    Dropbox
         0%    rapportd
Top Processes by Memory: ℹ️
    241 MB    Skype
    206 MB    Safari
    172 MB    Spotify
    129 MB    mds_stores
    120 MB    Finder
Virtual Memory Information: ℹ️
    2.49 GB    Free RAM
    4.03 GB    Active RAM
    844 MB    Inactive RAM
    1.23 GB    Wired RAM
    2.80 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Apr 17, 2015, 07:54:25 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Safari_2015-04-17-075425_[reda cted].crash
    Apr 17, 2015, 07:42:57 AM    Self test - passed
    Apr 16, 2015, 10:33:24 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/PDFpen_2015-04-16-103324_[reda cted].crash
    Apr 16, 2015, 08:07:28 AM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-04-16-080728_[redact ed].cpu_resource.diag [Click for details]
    Apr 14, 2015, 07:13:57 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-04-14-191357_[redacted].crash

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

OS X Mavericks and iwork frequent crashes

Hi there,
I have a late 2012 MacBook Pro with Mavericks and the new iwork suite.
The system and the program suite are unrealiable and unstable. I have frequent crashes using Keynote, losing important presentations. The screen freezes, forcing a mannual reboot. In addition, everytime I connect to projector, using keynote, the system crashes, and I also have to manually force reboot. After rebooting with the projector connected, the second screen appears fine. These problems are very frequent. I wonder if anyone has similar problems.
I am a poweruser, used to compile my own scripts and research programs. I use OSX since Leopard, which never had such issues. Since Mountain Lion, I can not rely on my computer as I used to in my old macbook white from late 2008.
Is there something I can do to stop these crashes?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash or panic reports. If you don't see that heading, select
View ▹ Show Log List
from the menu bar.
A crash report has a name that begins with the name of the crashed process and ends in ".crash". It may be under either of the two subcategories, "System" and "User." A panic report has a name that begins with "Kernel" and ends in ".panic".
Select the most recent of each and post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post any other kind of diagnostic report, such as a hang log — they're very long and not helpful.

Quicken 2006/2007 crashing due to Snow Leopard? (crash report attached)

I have spent several hours with Quicken, on the phone, chatting and email instructions. Q2006 and 2007 crash when I try to print or export qif. This starting happening after I installed Snow Leopard. I have trashed plists, installed patches, updated to 2007, booted in safe mode, created new user/new admin, new files, etc. It always crashes. I have repaired permissions repeatedly, run Onyx, deleted caches, etc. I uninstalled silk and reinstalled Q2006.Their tech support insists that Snow Leopard is to blame. I reinstalled SL and Rosetta; nothing changed. It will let me download and enter transactions but sometimes it opens with data from 2007. Here is the crash report:
Process: Quicken 2006 [343]
Path: /Applications/Quicken 2006/Contents/MacOS/Quicken 2006
Identifier: com.intuit.quicken
Version: 15.0.6 (15.0.6)
Code Type: PPC (Translated)
Parent Process: launchd [102]
Date/Time: 2009-11-08 18:43:45.902 -0600
OS Version: Mac OS X 10.6.1 (10B504)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 LaunchCFMApp 0xb80d59cd 0xb8000000 + 874957
1 LaunchCFMApp 0xb80c01bb 0xb8000000 + 786875
2 LaunchCFMApp 0xb80dda6c 0xb8000000 + 907884
3 LaunchCFMApp 0xb814551b spinlockwrapper + 1791
4 LaunchCFMApp 0xb801d03b 0xb8000000 + 118843
Thread 1:
0 libSystem.B.dylib 0x800c57da machmsgtrap + 10
1 libSystem.B.dylib 0x800c5f47 mach_msg + 68
2 LaunchCFMApp 0xb819448f CallPPCFunctionAtAddressInt + 206155
3 libSystem.B.dylib 0x800f2f39 pthreadstart + 345
4 libSystem.B.dylib 0x800f2dbe thread_start + 34
Thread 2:
0 LaunchCFMApp 0xb815ae44 spinlockwrapper + 90152
1 LaunchCFMApp 0xb8179d27 CallPPCFunctionAtAddressInt + 97763
2 LaunchCFMApp 0xb80c6c97 0xb8000000 + 814231
3 LaunchCFMApp 0xb80c01bb 0xb8000000 + 786875
4 LaunchCFMApp 0xb80dda6c 0xb8000000 + 907884
5 LaunchCFMApp 0xb814551b spinlockwrapper + 1791
6 LaunchCFMApp 0xb801d03b 0xb8000000 + 118843
Thread 3:
0 LaunchCFMApp 0xb815aa83 spinlockwrapper + 89191
1 LaunchCFMApp 0xb8176f29 CallPPCFunctionAtAddressInt + 85989
2 LaunchCFMApp 0xb80c6c97 0xb8000000 + 814231
3 LaunchCFMApp 0xb80c01bb 0xb8000000 + 786875
4 LaunchCFMApp 0xb80dda6c 0xb8000000 + 907884
5 LaunchCFMApp 0xb814551b spinlockwrapper + 1791
6 LaunchCFMApp 0xb801d03b 0xb8000000 + 118843
Thread 4:
0 LaunchCFMApp 0xb815aa83 spinlockwrapper + 89191
1 LaunchCFMApp 0xb8176f29 CallPPCFunctionAtAddressInt + 85989
2 LaunchCFMApp 0xb80c6c97 0xb8000000 + 814231
3 LaunchCFMApp 0xb80c01bb 0xb8000000 + 786875
4 LaunchCFMApp 0xb80dda6c 0xb8000000 + 907884
5 LaunchCFMApp 0xb814551b spinlockwrapper + 1791
6 LaunchCFMApp 0xb801d03b 0xb8000000 + 118843
Thread 5:
0 LaunchCFMApp 0xb815aabe spinlockwrapper + 89250
1 LaunchCFMApp 0xb8177033 CallPPCFunctionAtAddressInt + 86255
2 LaunchCFMApp 0xb80c6c97 0xb8000000 + 814231
3 LaunchCFMApp 0xb80c01bb 0xb8000000 + 786875
4 LaunchCFMApp 0xb80dda6c 0xb8000000 + 907884
5 LaunchCFMApp 0xb8145da1 spinlockwrapper + 3973
6 LaunchCFMApp 0xb801d03b 0xb8000000 + 118843
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb80bfe2c ecx: 0x00000000 edx: 0x00000000
edi: 0xb8211620 esi: 0x00000000 ebp: 0xb7fffa08 esp: 0xb7fffa04
ss: 0x0000001f efl: 0x00010202 eip: 0xb80d59cd cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00000000
Binary Images:
0x80000000 - 0x8006afe7 libstdc++.6.dylib ??? (???) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
0x800c5000 - 0x80269feb libSystem.B.dylib ??? (???) <E58B649F-FFDC-AB09-2028-8B706BEF7C0F> /usr/lib/libSystem.B.dylib
0x802e9000 - 0x802ecfe7 libmathCommon.A.dylib ??? (???) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <211AF0DD-42D9-79C8-BB6A-1F4BEEF4B4AB> /usr/lib/dyld
0xb8000000 - 0xb81defff LaunchCFMApp ??? (???) <3E4E06B8-E1FC-B232-1371-643DC0FBE8C9> /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp
0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <E58B649F-FFDC-AB09-2028-8B706BEF7C0F> /usr/lib/libSystem.B.dylib
Translated Code Information:
Rosetta Version: 22.23
Args: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp /Applications/Quicken 2006/Contents/MacOS/Quicken 2006
Exception: EXCBADACCESS (0x0001)
Thread 0: (0xb009ad38, 0xb815ae44)
0x902b6588: /usr/lib/libSystem.B.dylib : _dispatch_mgrinvoke + 228
0x902b60c0: /usr/lib/libSystem.B.dylib : _dispatch_queueinvoke + 320
0x902b6244: /usr/lib/libSystem.B.dylib : _dispatch_workerthread2 + 364
0x902b6380: /usr/lib/libSystem.B.dylib : _dispatch_workerthread + 76
0x901d6da8: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x902b6550 ctr: 0x9017a2d4
r00: 0x0000016b r01: 0xf0080bb0 r02: 0x00000000 r03: 0x00000004
r04: 0x00000000 r05: 0x00000000 r06: 0xf0080d0c r07: 0x00000001
r08: 0xf0080d28 r09: 0x00000000 r10: 0x00000039 r11: 0xa004b524
r12: 0x9017a2d4 r13: 0x10624dd3 r14: 0x90305b2c r15: 0xf0080c0c
r16: 0xf0080c8c r17: 0xa00664ac r18: 0xf0080d28 r19: 0xa00604f8
r20: 0xa00614f8 r21: 0xf0080d0c r22: 0xa0060478 r23: 0xa00603f8
r24: 0xa00664ac r25: 0x00000000 r26: 0x00000000 r27: 0xa00525c8
r28: 0xa0052300 r29: 0xa00525c8 r30: 0xf0080d28 r31: 0x902b64ac
Thread 1: (0xb019ed74, 0xb815aa83)
0x902b80b4: /usr/lib/libSystem.B.dylib : _dispatch_semaphore_waitslow + 248
0x902b63a8: /usr/lib/libSystem.B.dylib : _dispatch_workerthread + 116
0x901d6da8: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x902b80cc ctr: 0x901366c0
r00: 0xffffffda r01: 0xf0182dc0 r02: 0x00000000 r03: 0x00002403
r04: 0x00000040 r05: 0x3b9aafba r06: 0x00000020 r07: 0x00000000
r08: 0x3b9aafba r09: 0x00000000 r10: 0x3b9aafba r11: 0xa004c670
r12: 0x901366c0 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0xa0052790 r22: 0xa0052784 r23: 0xa005278c
r24: 0x0000054a r25: 0x489d3ee1 r26: 0xa00524d0 r27: 0x00000040
r28: 0x0000000f r29: 0x224d2fba r30: 0xa0052764 r31: 0x902b7fc4
Thread 2: (0xb0220d70, 0xb815aabe)
0x901d3544: /usr/lib/libSystem.B.dylib : _pthread_condwait + 880
0x904cd588: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _TSWaitOnConditionTimedRelative + 240
0x904cf5ec: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : _TSWaitOnSemaphoreCommon + 468
0x9045d3d0: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore : AsyncFileThread(void*) + 92
0x901d6da8: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x901d3588 ctr: 0x901366d0
r00: 0xffffffd9 r01: 0xf02038b0 r02: 0x00000001 r03: 0x00005b03
r04: 0x00005c03 r05: 0x0000003c r06: 0x00000000 r07: 0x00000000
r08: 0x0000a000 r09: 0x00000001 r10: 0xf0203e88 r11: 0xa004c678
r12: 0x901366d0 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x9053d518 r19: 0x9053d51c
r20: 0xa0053698 r21: 0x9053d520 r22: 0x00000000 r23: 0x00000000
r24: 0x0000003c r25: 0x00000001 r26: 0xa00536e4 r27: 0xf0203e88
r28: 0xa00ad394 r29: 0x00000000 r30: 0xa00ad3c8 r31: 0x901d31e0
Thread 3: (0xb011cd74, 0xb815aa83)
0x902b80b4: /usr/lib/libSystem.B.dylib : _dispatch_semaphore_waitslow + 248
0x902b63a8: /usr/lib/libSystem.B.dylib : _dispatch_workerthread + 116
0x901d6da8: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x902b80cc ctr: 0x901366c0
r00: 0xffffffda r01: 0xf0101dc0 r02: 0x00000000 r03: 0x00002403
r04: 0x00000040 r05: 0x3b635815 r06: 0x00000020 r07: 0x00000000
r08: 0x3b635815 r09: 0x00000000 r10: 0x3b635815 r11: 0xa004c670
r12: 0x901366c0 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0xa0052790 r22: 0xa0052784 r23: 0xa005278c
r24: 0x0000054a r25: 0x4864696f r26: 0xa00524d0 r27: 0x00000040
r28: 0x0000000f r29: 0x2215d815 r30: 0xa0052764 r31: 0x902b7fc4
Thread 4: Crashed (0xb7fffa04, 0xb80d59cd)
0x976d98e8: /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation : __CFBundleLoadExecutableAndReturnError + 1188
0x970b5714: /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation : __NSBundleLoadCode + 944
0x970b5d0c: /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation : -[NSBundle loadAndReturnError:] + 692
0x970b1dc8: /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation : -[NSBundle principalClass] + 48
0x98250c04: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit : -[NSInputManager _loadBundle] + 124
0x98251508: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit : -[NSInputManager initWithName:host:] + 2064
0x98251a2c: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit : +[NSInputManager initialize] + 976
0x90cfd5b0: /usr/lib/libobjc.A.dylib : _classinitialize + 472
0x90d0613c: /usr/lib/libobjc.A.dylib : _prepareForMethodLookup + 124
0x90d07714: /usr/lib/libobjc.A.dylib : _lookUpMethod + 72
0x90cfcb48: /usr/lib/libobjc.A.dylib : objcmsgSend + 264
0x9803d998: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit : -[NSApplication finishLaunching] + 124
0x98031fa4: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit : -[NSApplication _startRunMethod] + 92
0x98038ec4: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit : _NSApplicationLoad + 164
0x98689560: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit : __NSNavCreatePutFileDialog + 328
0x951def5c: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices : _NavCreatePutFileDialog + 124
0x84c25f54: No symbol
0x84c2d42c: No symbol
0x84c2ef14: No symbol
0x84c31438: No symbol
0x84c30f78: No symbol
0x84f57204: No symbol
0x84f5515c: No symbol
0x84c4dc10: No symbol
0x84f4af14: No symbol
0x8503e64c: No symbol
0x8503deec: No symbol
0x8503d990: No symbol
0x850397c8: No symbol
0x8545bafc: No symbol
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x976d98e8 ctr: 0x90220504
r00: 0x00000000 r01: 0xbfffcd10 r02: 0x00000000 r03: 0x00000000
r04: 0x0d8b6cf0 r05: 0x0d800000 r06: 0x00000000 r07: 0x0d8fc094
r08: 0x00002db0 r09: 0x001f8100 r10: 0xfffffffb r11: 0x48024048
r12: 0x90220504 r13: 0xa0e90a80 r14: 0xa0eb0cf8 r15: 0x903b43f2
r16: 0x0d8b6240 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x0d8b5b80 r22: 0x0d8b5dd0 r23: 0x0d8b63d0
r24: 0x0e119a00 r25: 0x00000001 r26: 0x00000000 r27: 0x00000000
r28: 0x0d8b6750 r29: 0x0d8b6cf0 r30: 0x00000000 r31: 0x976d9458
Any suggestions?

This block:
Process: Quicken 2006 343
Path: /Applications/Quicken 2006/Contents/MacOS/Quicken 2006
Identifier: com.intuit.quicken
Version: 15.0.6 (15.0.6)
Code Type: PPC (Translated)
Parent Process: launchd 102
....indicates PPC code and Q'06 - Start by getting rid of all Q'06 stuf, perhaps. Then check for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure any 3rd party apps AND plug-ins are Snow Leopard compatible.
Seen these?
http://discussions.apple.com/thread.jspa?messageID=10249818&#10249818
http://discussions.apple.com/search.jspa?search=Go&q=Quicken

Can't sync Palm Centro and Outlook 2007/Windows 7 - please help!

Hello,
I've never posted on a forum, but I'm at my wits end...! I've been trying to get my Palm Centro to sync Contacts/Calendar/Memos to Outlook 2007 on my new laptop for a week now with no success. It used to sync just fine to my old computer with Windows XP and Outlook 2003. Then that computer crashed (my Outlook files were backed up on an external harddrive). I received my new computer with Windows 7 XP (32-bit) and Outlook 2007.  I've downloaded the Palm Desktop 6.2, Windows 2007 Conduit, and Software Update 1.03 (Windows installer) for Centro for Verizon.
When I sync my phone to my new Outlook, it completes all 12 steps, but does not load Contacts/Calendar/Memos to Outlook.  This is a list of the error messages:
   HotSync session started on 04/14/10 12:11:25, and completed in 100.0 seconds
Outlook Calendar synchronization completed with messages
Duration: 5.4 seconds
Outlook Calendar
Please set the option "Enable Synchronization when Outlook is offline" in UI inorder to synchronize in Offline mode
OLERR:0C-000F (0x0)
OLERR:0D-0003
OLERR:0D-0001
- Not Synchronized
Outlook Contacts synchronized successfully
Duration: 0.0 seconds
Outlook Contacts
OLERR:0C-000F (0x0)
OLERR:0D-0003
OLERR:0D-0001
- Not Synchronized
Outlook Tasks synchronized successfully
Duration: 0.0 seconds
Outlook Tasks
OLERR:0C-000F (0x0)
OLERR:0D-0003
OLERR:0D-0001
- Not Synchronized
Outlook Notes synchronized successfully
Duration: 0.0 seconds
Outlook Notes
OLERR:0C-000F (0x0)
OLERR:0D-0003
OLERR:0D-0001
- Not Synchronized
Media synchronized successfully Duration: 3.8 seconds
Backed up some files successfully to Backup Folder
Duration: 90.0 seconds
Backed up 9 file(s) successfully
AddressingLibRecent-HsCh
AddressingLibRecent-HsCi
Messages Database
PhoneCallDB
Cookie Data
AddressCompaniesDB
psysLaunchDB
Saved Preferences
AddressTitlesDB
Failed to backup 1 file(s) PmTraceDatabase Protocol Error: Handheld file could not be opened. (4004) SYNCERR_FILE_NOT_OPEN
Can someone please help me transfer Contacts/Calendar/Memos from my Palm Centro to my computer's Outlook 2007?
I've ready about 3rd party software in posts (Pocket Mirror), but I don't know if it applies here because the Contact/Calendar/Memo information is in my Centro - not in Outlook. I need to get it from my Centro to Outlook 2007.
Any help is greatly appreciated! Thank you!

hat wrote:
I have a Pre Plus and am using CompanionLink software. If the Centro is like the Plus (which I believe it is) it will not sync with Outlook. Here is a link to Companion Link:
http://www.companionlink.com/index.html
I have been using this and it works great. On their site you can choose the phone and the particular program you need to sync with and choose which you way you want to sync.
Hope this helps
Sorry hat, the Centro has absolutely nothing in common with a webOS device! It runs PalmOS. Nice of you to reply with your suggestion though!
@SyncHelpPlease: OLERR errors are covered in this Palm KB article:
http://kb.palm.com/wps/portal/kb/common/article/31167_en.html
Something I noticed in your post - you installed Palm 6.2.2 AND the 2007 conduit. Palm Desktop 6.2.2. has the 2007 conduits built into it already, and the patch is not needed. Whether this is the cause of your problems, I'm not sure, but I've fielded several posts of the same issue where the user did the same thing you did!
I'd suggest doing a clean uninstall, and reinstall of Palm Desktop 6.2.2 only.
I admit, I do not use Outlook, nor Win7, so I'm giving you my best guess at a way to solve your problem. Hopefully, this may lead to a solution!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Applying OS SP2 to existing Windows Srv 2008 SP1 w/ Exchange 2007 SP3 w/RU 5, before installing RU13

We are in the process of planning the deployment of Windows Server 2008 SP2, latest MS updates, and update rollup 13 for Exchange 2007 SP3. Looking to migrate to Exchange 2013 & Exchange online in the future
Are there any issues that we need to be aware of before proceeding with the big updates. Exchange is running fine, but we're not able to fully patch these servers unless SP2 is installed. Thanks a bunch.
Environment:
running Exchange 2007 SP3 with update rollup 5 for all of our email servers (CCR, HUB/CAS w/WNLB). The OS installed for all of these are Windows 2008 SP1 (6.0.6001
Service Pack 1 Build 6001), latest MS critical updates are the only recent updates installed.
We also have Forefront Security for Exchange that I might remove.

Hello,
Do you mean you want to upgrade Windows Server 2008 SP1 to Windows Server 2008 SP2, and then upgrade Exchange 2007 SP3 with rollup 5 to rollup 13? If so, the OS not being upgraded to a new version.
If you want to deploy Exchange 2007 SP3 with rollup13, you must install Windows Server 2008 SP2 on a computer that does not have Exchange installed, and then install Exchange 2007 SP3 with rollup 13, and move your mailboxes to new Exchange Server.
Based on your environment, you need to upgrade a clustered mailbox server, you must build a new failover cluster using Windows Server 2008 SP2 as the operating system for all nodes, and then migrate the data from the old cluster to new cluster.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

EBS 2008 Console and SCE 2007 Crashes

Similar Messages

Maybe you are looking for