EBS configuration for UK

Hi all
Good Morning. Can anybody help me out in configuring EBS for UK requirement. I will be grateful if you could send config guide on the same.
Regards
Brahmam

The EBS configuration is same for all countries you would need to know the format in which you would receive the file from the bank if its csv or pdf u need to make a conversion program. Get the BAI codes from the bank and configure the algorithm accordingly. Tcode OT83

Similar Messages

Oracle EBS configuration for Fresh Installation

Dear All,
I have Installed a fresh Installation from Oracle E-business. Is there is any new configuration I need to do before start creating My Ledger and Legal Entity.
I face an following Error, when I enter to GL.
APP-SQLGL-08252: Oracle General Ledger could not retrieve your access set information.
Please make sure the profile option Gl:Access Set is set up properly for you responsibility.
Thank you very much,
Ahmad,

Ahmad Hamdan wrote:
Dear All,
I have Installed a fresh Installation from Oracle E-business. Is there is any new configuration I need to do before start creating My Ledger and Legal Entity.
I face an following Error, when I enter to GL.
APP-SQLGL-08252: Oracle General Ledger could not retrieve your access set information.
Please make sure the profile option Gl:Access Set is set up properly for you responsibility.
Thank you very much,
Ahmad,Please see (R12 ASM When Try To Create Account Mapping To Assign To Secondary Ledger Get APP-SQLGL-08252 [ID 551547.1]).
Thanks,
Hussein

Error in Configuring the EBS Adapter for WebCenter

Hi All,
when I'm configuring EBS Adapter for Web Center I'm getting the below Error while running the sql script AXF_EBS_SOLUTION_DATA.sql ,and I check the AXF_CONFIGS table is not available in db schema, not sure when this table will create. please find the error log detail below and give me some hint or link to overcome from this issue.
Error Log:
SQL> @AXF_EBS_SOLUTION_DATA.sql
49 /
v_formId AXF_CONFIGS.FORMID%TYPE;
ERROR at line 2:
ORA-06550: line 2, column 12:
PLS-00201: identifier 'AXF_CONFIGS.FORMID' must be declared
ORA-06550: line 2, column 12:
PL/SQL: Item ignored
ORA-06550: line 3, column 26:
PLS-00302: component 'EVENTID' must be declared
ORA-06550: line 3, column 13:
PL/SQL: Item ignored
ORA-06550: line 6, column 8:
PL/SQL: ORA-02289: sequence does not exist
ORA-06550: line 6, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 7, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 9, column 8:
PL/SQL: ORA-02289: sequence does not exist
ORA-06550: line 9, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 10, column 254:
PLS-00320: the declaration of the type of this expression is incomplete or
malformed
ORA-06550: line 10, column 254:
PL/SQL: ORA-00904: "V_FORMID": invalid identifier
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 11, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 11, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 8:
PL/SQL: ORA-02289: sequence does not exist
ORA-06550: line 13, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 14, column 254:
PLS-00320: the declaration of the type of this expression is incomplete or
malformed
ORA-06550: line 14, column 254:
PL/SQL: ORA-00904: "V_FORMID": invalid identifier
ORA-06550: line 14, column 1:
PL/SQL: SQL Statement ignored
Thanks in advance
Sanjeev

Hi Sanjeev,
You need to check if you have access to AXF_CONFIGS table. Check if you have ran GRANT_ACCESS.sql script which has below grant commands.
grant execute any type to apps;
grant create type to AXF;
grant select on AXF.AXF_CONFIGS to apps;
v_formId AXF_CONFIGS.FORMID%TYPE; means tableName.columnName%type;
so looks like when you are running AXF_EBS_SOLUTION_DATA.sql you are not able to access AXF_CONFIGS table.
Hope this helps.
Regards,
Amol Gavali.

Comparison of Fax features for EBS configuration

H All,
Could anyone please let me know where could find a document related to different Fax features with comparison for EBS configuration.
We need to find out which fax will be better to be integarted with EBS 12.0.6 to work.
Thanks for your time!
Regards,

Please see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=Fax&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
I do not think you will find a document with a comparison, and I believe the best practice is to contact the vendors and get all those details.
Thanks,
Hussein

HRMS Analytics configuration for Oracle EBS

Hi ,
I have to configure HRMS Analytics for Oracle EBS(Referring Configuration Guide for OBIA 7.9.6.3) , I am new to OBIA :
I just started working domain Values (csv files), I have few queries for the same:
1. Is is necessary to Use the query mentioned in the OBIA Setup guide , to get the Domain Values. Can we use different query to extract the Domain Values ?
What is the effect if query is changed ?
2. Some csv are for 11i instance ,so does it mean , it is not required to configure those csv files for R12 ?
Any help in this regard will be highly appreciated.
Thanks,
Razi

Here are the answers to the questions:
1. Is is necessary to Use the query mentioned in the OBIA Setup guide , to get the Domain Values. Can we use different query to extract the Domain Values ?
What is the effect if query is changed ?
A: Not necessairily. The query is there to help you gather the relevant data but this is a functional exercise. If a HR Functional person on your team can identify the relevant domains, events, etc, then you can populate it manually. The goal is to get the relevant EBS domain values and map to the BI requirements. The query is a fast way to get the list of the existing values from the EBS DB.
2. Some csv are for 11i instance ,so does it mean , it is not required to configure those csv files for R12 ?
A: If the COnfig Guide specifically has a section for R12 versus 11..then you need to follow for the version you are on. However, there are general "EBS" configurations that you need to do for both versions. Rule of thumb, if it doesnt specific the version, then it needs to be done for both.
If helpful, pls mark correct or helpful

Have a problem in using Interpretation algorithm 15 in EBS configurations

Experts,
I have configured Interpretation algorithm 15 in EBS settings for my client. And in that process, the system picks the reference field data and updates the same in Assignment field. But the data which is getting updated in assignment field is only partial.
To be more exact, the system picks the data from Reference field from bank file and updates only 13 digits in assignment field. I also checked the data field of assignement allows upto 18 digits.
For example:
Reference field (bank file): 20000000002011
Updated assignment: 20000000002011 (only 13 digits)
We want to use this assingment field which has the combination of payment document no + year for clearing purposes.
Please advise...
Raman

hi Sudeep.
kindly look at this thread as reference ,inorder to get rid of your problem
aler&idocs
Regards
Saurabh Goel

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

Help on EBS software for firewalled scenario

Hi,
We have the configuration of a three-tier application on sun v890 servers and each tier sits behind a firewall. i.e. database and application have a firewall in between, web server to application has a firewall and so on.
while configuring backups for the databases we need to know the exact port number that is being used by the EBS backup software for taking the backups or possibility of configuring the minimum number of ports through which the backup can be taken for each server.
Could anybody give a clue to this scenario?
regards,
Ganadeva

Hi,
Refer sun document 819-0286-10.pdf available for download at http://192.18.109.11/819-0286-10/819-0286-10.pdf
As per the sub-section "configuring firewall support" within "server management"
following can be the port allocations for opening the firewall for the service connections:
1) for the backup server
5+2n
n is number of devices registered on the EBS server
for the current configuration having a single LTO3 tape drive device ,
above count comes to 7
starting from 7937+7=7944
2) for every client i.e. every server 2 port 7937 and 7938
3) there is no separate storage node as the backup server is having the server software as well as the direct connection to the tape library.
Refer the page 83 for a possible firewall setting based on above
TCP Packet Considerations
Set firewall rules to allow inbound and outbound TCP packets to and from the
following service ports:
1)On the Sun StorEdge EBS server � open ports between the Sun StorEdge EBS clients and the Sun StorEdge EBS server. ============================>7937-7944
2) On the Sun StorEdge EBS storage node � open ports between the Sun StorEdge EBS clients and the Sun StorEdge EBS storage node. ============================> is the same as storage server in our setup
3) On port 7937 � open the port between the Sun StorEdge EBS server
and both of the following: � Sun StorEdge EBS clients
� Sun StorEdge EBS storage node on the client side of the
firewall
4) On port 7938 � open the port for inbound and outbound requests.
My query is what about the connection ports? The range of 10001 to 30000 is too large from firewall point of view. I have not been able to find a

EBS Extension For Endeca Version 4

HI , I had installed the EBS Extension for Endeca by following the procedure as per the Document : Installing Oracle E-Business Suite Extensions for Oracle Endeca, Release 12.1.3.4 (Doc ID 1562372.1)
The Database installation step completes Successfully and Validated too.
on the Step where i had ran the script envSetup.sh 5 times. on the phase where i had configure the EID and ETL for the EBS extension, But the Validation steps are failing.
I can see the Contents but without any Data in it. Control panel Tab of Studio do have the Data source Tab, but no data sources are appearing and no Create Data Source tab. Also in the My Account tab there are functionality like Password or Manage pages are not appearing. Application Settings says choose data source, but no data sources are appeared.
Thing is my Clover ETL Server is Working fine. Full Load Graphs are running Successfully. But Still there is no luck in the Oracle Endeca Studio. As per the Document the I had followed all the Steps perfectly.
Can Anyone please suggest me what is the Error ?? And What should I do to Resolve it ??
Thank YOu
Bhumin Kamdar

Palak, since your question is about EBS, could you please repost it In one of the EBS forums at
E-Business Suite
The folks there should be able to advise you how to overcome the prerequisite failures that the installer seems to be complaining about. ("failed" lines).
This forum is only meant for Fusion Applications technology questions.
Thanks,
Oliver
Fusion Apps Developer Relations

Posting area 2 in ebs configuration

Hi All,
Please let me know the significance of posting area 2 in ebs configuration and how the posting happens in teh same.
Preferrablywith an example and with accounting entries for the same.
Regards
Rudra

Hi All,
Please provide some pointers, if any..
Regards
Rudra

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

How to have Multiple Configurations for a Flex Application

Hi All,
I've seen this question asked in various forms multiple times, but never answered: How do you set up a FLEX configuration to have different configurations for development (local), test server, staging server, beta server, and production server? I cannot imagine that Adobe has not accounted for this, something that is very standard in most development teams. Zend Framework has a very elegant solution for this: in the configuration file you define all aspects that can be configured, as well as the various environments (development, staging, beta, live, etc.). Then, in the bootstrap file you specify which environment you want to work in, and you're all set.
How can something like this be achieved in FLEX?
Many thanks!
-Mike

Maybe my setup is unconventional, I doubt it, though:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Developer then publishes Flex app to staging server. -> need to configure FLEX to point to staging PHP code here.
4) Flex app then gets published to live server. -> need to configure FLEX to point to live PHP code here.
Now, using ANT, the scenario would look like this:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Code is good and developer checks it back into SVN.
4) ANT extracts latest build from SVN and builds it, then publishes to staging server. -> need to configure FLEX to point to staging PHP code.
I am using PHPUnderControl as my build server for PHP.
I am also unclear as to how my goal could be achieved using ANT?
Thanks!
Mike

ASA 5505 configured for WebVPN connecting to Citrix Web Interface

ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface . The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark citrix server http:// 172.30.40.5.) i enter the citrix and then for example i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
thanks.

Teymur,
Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error. It is possible that it is generating a different error.
The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1. Can you confirm the exact version of code you are running on the ASA.
If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
Thanks
-Jay

Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server

I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
Your help would be gracefully appreciated.

You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"
From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
Regards,
John A. Booth
http://www.metavero.com

Want to use an iPod photo configurated for Mac on a PC

I want to use my old iPod photo (configurated for Mac) on a PC (but do not need to keep my songs and photos). Is this possible? If so, what do I do?
iMac G5 Mac OS X (10.4.8) iPod 5th generation 60 GB

If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. This will erase your drive so you need to have your songs and photos backed up. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews and has the functionality to let you copy content from the iPod to the PC. Not sure if it does photos but have a look: XPlay 2
You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

EBS configuration for UK

Similar Messages

Maybe you are looking for