EBS fresh installation

Hello Experts,
I've to install fresh EBS R12 instance on 64-bit machine with Linux OS, I've some questions about that, if any kindly can provide answers:
1. I've 16GB RAM, is it necessary to configure 32GB swap area for it?
2. The document (Doc ID 761566.1) states:
"net.ipv4.ip_local_port_range: values recommended for the local port range may need to be adjusted according to the specific needs of the user's environment in order to avoid port conflicts."
Why do we set this parameter and does it affect Network or conflicts with any other server?
3. The document states:
"kernel.shmall: The listed value is the minimum requirement - we recommend an actual setting that is at least equal to the sum of all the SGAs on the system, divided by the page size."
I'm going to install a fresh instance, how do I configure this setting?
4. What is "Oracle Business Accelerator for EBS"? does it require different settings/steps than a normal EBS installation?
Please help.
Thanks & regards
Aneel Ahmed

1. I've 16GB RAM, is it necessary to configure 32GB swap area for it?
Oracle Database (RDBMS) on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) (Doc ID 169706.1)
Oracle Database Search Results: swap
2. The document (Doc ID 761566.1) states:
"net.ipv4.ip_local_port_range: values recommended for the local port range may need to be adjusted according to the specific needs of the user's environment in order to avoid port conflicts."
Why do we set this parameter and does it affect Network or conflicts with any other server?
http://docs.oracle.com/cd/E11882_01/install.112/e47689/pre_install.htm#BABBJFAI
3. The document states:
"kernel.shmall: The listed value is the minimum requirement - we recommend an actual setting that is at least equal to the sum of all the SGAs on the system, divided by the page size."
I'm going to install a fresh instance, how do I configure this setting?
Just use the same values mentioned in the doc.
4. What is "Oracle Business Accelerator for EBS"? does it require different settings/steps than a normal EBS installation?
Accelerators | Oracle Consulting
Thanks,
Hussein

Similar Messages

Oracle EBS configuration for Fresh Installation

Dear All,
I have Installed a fresh Installation from Oracle E-business. Is there is any new configuration I need to do before start creating My Ledger and Legal Entity.
I face an following Error, when I enter to GL.
APP-SQLGL-08252: Oracle General Ledger could not retrieve your access set information.
Please make sure the profile option Gl:Access Set is set up properly for you responsibility.
Thank you very much,
Ahmad,

Ahmad Hamdan wrote:
Dear All,
I have Installed a fresh Installation from Oracle E-business. Is there is any new configuration I need to do before start creating My Ledger and Legal Entity.
I face an following Error, when I enter to GL.
APP-SQLGL-08252: Oracle General Ledger could not retrieve your access set information.
Please make sure the profile option Gl:Access Set is set up properly for you responsibility.
Thank you very much,
Ahmad,Please see (R12 ASM When Try To Create Account Mapping To Assign To Secondary Ledger Get APP-SQLGL-08252 [ID 551547.1]).
Thanks,
Hussein

How to backup up the fresh installation of Oracle Apps R12?

Hi
I have done a fresh installation of Oracle Apps R12 on IBM-AIX machine. I would like to know, what exactly do i need to backup either the file system or database. Please let me know in detail. Actually i am fresh to Oracle Apps enviorment but expert in Oracle Database (Core) level.
Thanks.

This topic has been discussed several times before on this forum. Please check the following threads for more details:
Apps Backup
Re: Apps Backup
Backup Oracle Applications (11.5.10.2)
Re: Backup Oracle Applications (11.5.10.2)
Best Backup Strategy
Re: Best Backup Strategy
System Backup
system backup
Reommended backup and recovery startegy for EBS
Re: Reommended backup and recovery startegy for EBS

Fresh Installation Boot Errors

I'm new to trying to work with Solaris 10, and to a lot of Solaris in general, so while I'd normally be happy to do a lot of reading (and have tried searching for answers on google a good deal already), I'm having a problem after a fresh installation of Solaris 10 on a Sparc T3-1 server that I'm hoping someone can point me in the right direction to solve.
During the install I told the text installer I wanted to do a ZFS installation using both of my disks (only 2) in a mirrored configuration. I selected the default set of core system packages.
After the install seemed to be done and the system rebooted, I'm getting the following when it comes up:
Boot device: /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5000c5003a04f911,0:a File and args:
SunOS Release 5.10 Version Generic_142909-17 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
Failed to plumb IPv4 interface(s): igb0
Jul 7 12:12:34 svc.startd[9]: svc:/network/physical:default: Method "/lib/svc/method/net-physical" failed with exit status 96.
Jul 7 12:12:34 svc.startd[9]: network/physical:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Hostname: tempdb
Loading smf(5) service descriptions: 1/136
WARNING: svccfg import /var/svc/manifest/application/management/sma.xml failed
2/136
WARNING: svccfg import /var/svc/manifest/application/management/wbem.xml failed
3/136
WARNING: svccfg import /var/svc/manifest/application/management/seaport.xml failed
followed by another 133 lines with similar failures, followed by:
svccfg import warnings. See /var/svc/log/system-manifest-import:default.log .
WARNING: svccfg apply /var/svc/profile/generic.xml failed
WARNING: svccfg apply /var/svc/profile/platform.xml failed
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass): Reading ZFS config: done.
Mounting ZFS filesystems: (6/6)
After doing a new install off of the install media (cd) I would have expected the system to be able to boot without errors, but obviously I've missed something or done something wrong, and I'm hoping that someone can point me in the right direction for figuring out what that is and fixing it.
I'm happy to provide any other details if there are questions.

I do see a few messages in the installation log that give me concern. The first is:
*Creating and checking file systems
- Creating rpool/ROOT/rdata dataset
- Creating dataset rpool/ROOT/rdata/var
libshare SMF initialization problem: entity not found
libshare SMF initialization problem: entity not found*
There are also quite a few instances where a PKG installation says something like this:
*Installation of <SUNWcnetr> was successful.
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
346 blocks*
or
*Installation of <SUNWj5dvx> was successful.
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
7153 blocks
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.dir>failed
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
pathname does not exist
ailed
pathname does not exist
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.alias.all> failed
pathname does not exist
Installation of <SUNWaspell-en-share> was successful.
14501 blocks
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/75dpi/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/TTbitmaps/fonts.dir> failed
pathname does not exist
Can't open ./fonts.dir
Can't open ./fonts.dir*
There are also a few that say:
Reboot client to install driver.
The installer did seem to reboot at the end. Does the installer handle those 'reboot client' cases itself?

I saved my "users" folder to an external HD. I did erase and install on my imac. Now how do i get the accounts to open up on the fresh installation?

I saved my "users" folder to an external HD. I did erase and install on my imac. Now how do i get the accounts to open up on the fresh installation?

To move a home folder, create a new home folder, copy the contents of the old home folder into the new home folder, and then delete the old home folder. Take a look at this link, http://manuals.info.apple.com/en_US/UserMgmt_v10.6.pdf

Oracle 10g RMAN is not working in RHEL 4 after fresh installation

I downloaded Oracle 10g R2 from OTN at home for self study.
I have problem with the RMAN after fresh installation Oracle 10g in RedHat Enterprise Linux AS 4. (x86)
Everything seems works fine, database mounted including EM, SQLPlus, iSQLPlus etc.
But when I attempt to execute RMAN command on the terminal, nothing is happening. No RMAN prompt, No error message!
I ran the "relink all" command but no helps.
Please advice.
Edited by: Surf888 on Nov 16, 2008 9:51 AM

I guess you are a common Linux 'victim', you don't invoke Oracle's rman, but a Linux executable:
http://linux.about.com/cs/linux101/g/rman.htm
Check your PATH variable, you may move $ORACLE_HOME/bin to the top.
Werner

I'm a newbee, (Win Tech) Would like to know what command it is for reaching the reinstall menu at boot-up. I do not meen cmd r menu wich just install OSX above the OS. I think I need a totally fresh installation. Do you have any clue?

I'm a newbee, (Win Tech) Would like to know what command it is for reaching the reinstall menu at boot-up.
I do not meen cmd r menu wich just install OSX above the OS. I think I need a totally fresh installation.
Do you have any clue? Have several issues on a new MacBookPro but it's propably "PEBKAC" made..
Uffe

It is Command+r or for the online internet system it is Command+option/Alt+r keys. Then you use Disk Utility to erase the macintosh partition, from the built in recovery hd, or you can repartition the drive as one partition from the online system.
To actually get to the online internet system you have to hold that key combo down until you see a globe on the screen. Otherwise it will just boot from the built in recovery hd on the internal drive.

[SOLVED] Pacman is broken on fresh installation

I've just performed a fresh installation that seemed to go fine, following the Official Arch Linux Install Guide. However, I get the following during my first login:
Arch Linux 2.6.39-ARCH (myhost) (tty1)
myhost login: root
Password:
[root@myhost ~]# pacman -Sy
:: Synchronizing package databases...
error: local database version is too old
error: failed to init transaction (database is incorrect version)
try running pacman-db-upgrade
error: transaction already initiated
[root@myhost ~]#
I realize the error recommends that I run pacman-db-upgrade, but it seems very out-of-the-ordinary to encounter this error after having installed fresh with all default options. Could someone give me a hand?
Last edited by benash (2011-07-15 02:56:03)

karol wrote:
benash wrote:Thanks. I appreciate the responses. I ran pacman-db-upgrade, and that appeared to fix the problem. I'm now having some trouble downloading packages (1 out of 10 seems to be failing), but I just found the documentation on selecting appropriate mirrors.
What exactly do you mean by "failing"? Please post the errors you get.
But first, grab a fresh mirrorlist http://www.archlinux.org/mirrorlist/ and try to update again.
I agree with picking an updated mirror. If packages are "failing," then the mirrors may be out of sync. Also, the list of mirrors included on the ISO CD may be out of date.

[SOLVED] Cannot install packages during a fresh installation

Hi all,
I'm pretty sure I'm missing something from the wiki/forums, but I'm at a loss here...
I am going through a fresh installation of Arch. I am using AIF and stopped at step 4 "Prepare hard drive(s)". I intend to install on btrfs, so I went to a different console via ALT-F2, logged in as root and tried installing gptfdisk via "pacman -S gptfdisk". I got a few errors such as:
- error: could not open file /var/lib/pacman/sync/core.db: Failed to open '/var lib/pacman/sync/core.db'
(the rest of the errors pertain to the other available repositories)
I made sure to choose core and extras in AIF's step 1: "Select source".
What completely obvious thing am I missing here...?
Thanks.
Last edited by kcy29581 (2012-03-30 22:05:21)

SS4 wrote:
Did you sync the repositories?
pacman -Syy gptfdisk
You, sir, are a genius and I love you.
Now to figure out how I missed that xD
Thanks!

ORA-27102 IN FRESH INSTALLATION

Hi Forum
I have a problem with the fresh installation my environment is:
Solaris10 and Oracle DB10g R2 and the box have 4Gb RAM
The installation can`t continue and stop in the Database creation 2% with the error message ora-27102, the manual quick installation say:
==========================================================
On Solaris 10, use the following procedure to view the current value specified for resource controls, and to change them if necessary:
To view the current values of the resource control, enter the following commands:
# id -p // to verify the project id
uid=0(root) gid=0(root) projid=1 (user.root)
# prctl -n project.max-shm-memory -i project user.root
# prctl -n project.max-sem-ids -i project user.root
If you must change any of the current values, then:
To modify the value of max-shm-memory to 6 GB:
# prctl -n project.max-shm-memory -v 6gb -r -i project user.root
==================================================
But when I change the shm-memory and reboot the box, the value is the same default 998MB.
Please could anybody help me to resolve this problem
Thanks and regards,
Wilson

Please, could anybody know about this issue??

Need ECC 6.0 EHP 5 Fresh installation Manually prepared Step by step Guide

Hi Expert,
I am new for Installations of SAP systems presently am working in support project. I am going to install ECC 6.0 EHP 5 with
Linux/oracle fresh installation on 12/01/2012.
Can any one help me to do the installation.
If you have manually prepared Step by step document please mail me
my mail id is :sprasad.k7@gmail
THANKS IN ADVANCE.
Regards,
Sivaprasad.
Edited by: kurapati siva on Jan 7, 2012 10:09 PM

Srikishan D wrote:
Hi,
>
> Check out the steps mentioned in the official SAP Document:
>
> http://service.sap.com/instguides -> SAP Business Suite Apps -> SAP ERP 6.0 -> SAP EhP EhP5
> Installation guide for your OS/DB
> First Steps for EhP5 for SAP ERP 6.0
> How to Install EhP5 for ERP 6.0
>
> - An EhP5 Ready installation only installs a system at Netweaver 7.0 EhP2 and ERP Components at 600 level.
> - You need a Solution Manager 7.01 at Stack 26 to generate a stack.xml for EhP5 Installation.
> - Check which technical usage types you need to install as part of Eh5.
>
EHP5 installation comes with Central application component i.e. SAP_APPL and EA-APPL on 605 version. Its different from EHP4 installation where all ERP components comes on 600 release.
Thanks
Sunny

Exchange Server 2013 CU3 Installation Error - Fresh Installation

Hi All,
I am trying to install Exchange 2013 CU3 on Windows Server 2012 Datacenter Edition. This is New Server Forest build.
Forest Function Level and Domain functional Level is Windows Server 2008 R2
As part of this Fresh installation, I have tried to install CAS Server Role first on the server.
I have full admin (Schema,Entp, Domain) Previliges and installed MS recomended pre-requesities successfully.
Set the Powershell Execution policy as unrestricted.
But, When i run setup file using GUI option. I am getting the below error. I would like to know whether this is ignorable for installation or how to fix the issue.
Error:
Warning:
Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for
'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
Note: Server OS hardening policy has been applied in this server as per company security policy and Symantec A/V also installed in this server.
Regards
Manoj

Hi,
Same Error for Mailbox Server also.
Stopped the Symantec AV Service and Tried. But result is same.
02/18/2014 06:39:06.0018] [0] Active Directory session settings for 'Get-OrganizationRelationship' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred
Domain Controllers: '{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:06.0050] [0] User specified parameters:
[02/18/2014 06:39:06.0050] [0] Beginning processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0157] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:07.0391] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:07.0469] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0610] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] Ending processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0766] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0015] [0] Active Directory session settings for 'Get-AcceptedDomain' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred Domain Controllers:
'{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:08.0015] [0] User specified parameters:
[02/18/2014 06:39:08.0015] [0] Beginning processing Get-AcceptedDomain
[02/18/2014 06:39:08.0078] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:08.0078] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:08.0140] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0202] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] Ending processing Get-AcceptedDomain
[02/18/2014 06:39:08.0327] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0327] [0] While running the On-Promises test, either Get-AcceptedDomains or Get-OrganizationRelationship return a null value.
[02/18/2014 06:39:08.0717] [0] Finished loading screen WelcomePage.
[02/18/2014 06:45:23.0242] [0] Finished loading screen EULAPage.
[02/18/2014 06:45:26.0908] [0] Finished loading screen RecommendedSettingsPage.
[02/18/2014 06:45:30.0012] [0] Setup is determining what organization-level operations to perform.

I have three licenses for Adobe Illustrator and just made a fresh installation on the Windows 10 preview. On this particular

I have three licenses for Adobe Illustrator and just did a fresh installation on the
new Windows 10 preview. When I tried to update Illustrator - a totally routine
task- the update process failed and subsequent efforts failed again. The "error log"
is copied below. Any idea what is going on? For what it's worth, this doesn't really
have anything to to with Windows 10 versus 8.1 or whatever.
Extension Manager 6.0.8 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204
Adobe Application Manager
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204
Adobe Illustrator CS6 Update (version 16.0.3)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204
Photoshop Camera Raw 8.6(CS6)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204
Touch App Plugin Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204
Adobe Bridge CS6 5.0.2 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204
Adobe CSXS InfrastructureCS6
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204

wtt.math,
Please install the latest adobe application manager and try applying the available updates again.
Here is the link to download adobe application manager(AAM):
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Download AAM from the above link and install it.
Launch Updates again and try applying them.
-Pragya

U410 running really slow even after fresh installation

I bought an ideapad u410 a little over an year ago. It came pre loaded with windows 8. It had been running slow for some time. The machine would almost take 10 mins to boot up. Any time i try to access something for the first time, it would take almost 10 mins for it to open, be it files, file explorer, web browser, media file or any installed app or program. Once it opened if i tried accessing a second time, it didnt take long. I installed the lenovo solution centre and did a hardware scan to see if there is an issue with the hard disk or RAM or any other hardware. The scan came out clean with all the hardware tests passed.
I made a recovery disk and then reset the pc to get s fresh installation of the windows. I reset the system from PC settings. After getting a fresh installation when the problem persisted i reset the pc using the recovery disk. The recovery process took 30 hours to finish but that didnt solve the problem. When i tried to reset again it said that there is a partition error and partition could not be found. So i cleaned the hard drive using diskpart, made a primary partition and the. N formatted the HDD. When i tried to install windows 8 using recovery usb it says that it cant find active partition. So then i installed a copy of windows 7 which was very slow and took almost 3 hours to install. After installing windows 7 my laptop is still running very slow and it takes at least 5 minutes for me to access any file or to even right click and refresh the desktop.
How do i resolve this issue and how can i get a clean installation of the pre loaded windows 8 which i am not able to install from the recovery disk. In the beginning there was one drive of 1TB on which i created more partition to get 1 drive of 450 GB and another 200 GB using the default windows disk manager. Could this have led to the issue of the Laptop slowing down?

Kashb wrote:
I bought an ideapad u410 a little over an year ago. It came pre loaded with windows 8. It had been running slow for some time. The machine would almost take 10 mins to boot up. Any time i try to access something for the first time, it would take almost 10 mins for it to open, be it files, file explorer, web browser, media file or any installed app or program. Once it opened if i tried accessing a second time, it didnt take long. I installed the lenovo solution centre and did a hardware scan to see if there is an issue with the hard disk or RAM or any other hardware. The scan came out clean with all the hardware tests passed.
I made a recovery disk and then reset the pc to get s fresh installation of the windows. I reset the system from PC settings. After getting a fresh installation when the problem persisted i reset the pc using the recovery disk. The recovery process took 30 hours to finish but that didnt solve the problem. When i tried to reset again it said that there is a partition error and partition could not be found. So i cleaned the hard drive using diskpart, made a primary partition and the. N formatted the HDD. When i tried to install windows 8 using recovery usb it says that it cant find active partition. So then i installed a copy of windows 7 which was very slow and took almost 3 hours to install. After installing windows 7 my laptop is still running very slow and it takes at least 5 minutes for me to access any file or to even right click and refresh the desktop.
How do i resolve this issue and how can i get a clean installation of the pre loaded windows 8 which i am not able to install from the recovery disk. In the beginning there was one drive of 1TB on which i created more partition to get 1 drive of 450 GB and another 200 GB using the default windows disk manager. Could this have led to the issue of the Laptop slowing down?
You might want to check the ssd cache by following the command shown in the picture.

New macbook pro 15" retina - new fresh installation

Hi,
I bought the new mac just after it was released... When needed, how do I make a fresh installation of Mac OS X 10.8??? (without to pay another $???)

I've had the same problem - people suspect the graphics switching from one card to another causes the issue, but using gfxCardStatus did not prevent the random logouts. Other people speculated it was the scaled resolutions, and that using "Best for Retina" fixed it. I tried using that resolution as well as the 1920x1200 I wanted, but both got the crashes.
The only solution that has worked for me so far is to work at the native resolution (2880x1800) and blow up windows to a more comfortable zoom level. I've been using SetRes to do so - you can find it if you search for SetResX download and follow the osxdaily link.
I am using 10.7.4, but I believe the errors persist across all Lions. I would take it in for service, but I don't have time for the turnaround right now, so I'm stuck with it!

EBS fresh installation

Similar Messages

Maybe you are looking for