EBS R12 date format display error?

Hi all,
I am opening forms in EBS R12 but all the dates value displayed are DD-MM-RRRR instead
of the format like 21-04-2008, how do I resolve this please?
Thanks a lot

Hi all,
I am opening forms in EBS R12 but all the dates value
displayed are DD-MM-RRRR instead
of the format like 21-04-2008, how do I resolve this
please?
Thanks a lotWhat is the difference? if you need it in a different format, can you apply a format mask?
Thanks,
Chiru

Similar Messages

Date format convert error in XML interface based Adobe interactive forms

Hi experts,
I am using XML interface based Adobe interactive form in Web Dynpro ABAP. The form just contains some date fields and numeric fields.
When I test the WD Application, the date fields appear like 0000-00-00 at the first time. And then I set the form input disable, and get the XML from the form, at the same time I get the warning message, 'date format convert error'. By the way, I have set the edit pattern, display pattern and data pattern of the date field to YYYYMMDD, but there seems no effect.
Could you tell me how to set the default date format in date field Or clear the 0000-00-00?
And another question, all of the numeric fields in the form appear like 0.0, how can I set it to empty when the form initialize?
Best Regards,
Guo Guo Qing

Hi Chintan,
Thank you for your reply.
I have tried every possible changes on the Date field, locale, pattern. But still no effect. When the PDF come up in the WDA program, the date field is still '0000-00-00', and then I export the XML date of the form, there is also '0000-00-00' in the interface field.
I can't clear the '0000-00-00' in initializiation event using javascript because if I need to open the form again, if I do this, the value user input could be cleared.
I also try using Javascrip like this
if this.rawValue == "0000-00-00"
{ this.rawValue = ""; }
The code above can't clear the initializiation zeros too.
Have you used the XML interface based online Adobe Forms? I have used XML PDF forms for output before, that's perfect. But the input forms seems so strange.
Best Regards,
Guo Guo Qing

EBS R12 open PDF with error by "View Output" button

In EBS R12,
We did setup some report output as PDF.
After run concurrent job of report, click "View Output"
It prompt a new IE window and prompt error "Internet Explorer cannot display page".
Problem Client PC information:
1. Win XP SP3
IE 8
Adobe Reader 9 or 8 (Enable Option "Open PDF in Browser")
2. Win 7
IE 9
Adobe Reader 9 (Enable Option "Open PDF in Browser")
Any related setting can help for this?
Thanks.

Hi AsifMuhammad,
Thanks for your help.
- Is the issue with all the user (different machines).
>> Yes, tested on different user and different machines.
>> If using Acrobat Reader 8 or 9 will have the problem, while uninstall Acrobat Reader 8 or 9, then install Acrobat Reader 10 or 11 the problem fixed (Open pdf via IE is normal)
>> All are Opening the same "View Output" of the same already run Concurrent Program ID.
- Is the issue with all the PDF reports.
>> We do not use other PDF reports. (Forget to mention it is the concurrent program "Format Payment Instruction")
- Do you still get the error when trying with other browsers such as Firefox.
>> When using Firefox, it prompt "Download Postscript File" > Click "Open PostScript Document" > Then it still open by Acrobat Reader.
>> For this point, yes, we has been setup "Output as PostScript" for the concurrent program "Format Payment Instruction"
- Was the report working fine and did you do any changes recently.
>> The report is working fine, when using Acrobat Reader 10 or 11.
>> The problem seems just exist when using Acrobat Reader 8 or 9.
Of course, you may said possible solution maybe Install Acrobat Reader 10 or 11 for those user.
But it need furthur testing for our internal programs.
And I've checked, according Oracle's Document, R12 should support Acrobat Reader 5 or up.
Which lead me think, there should be missed some setting.
But I cannot find any related setting on this point.
Thanks

Unable to Define EBS R12 Data Load Mappings in FDMEE

Hi,
I am trying to integrate EBS R12 and HFM using FDMEE 11.1.2.3.500. Here are the steps that I followed:
a. Configured the EBS_DATA_SERVERS and PHYSICAL SCHEMAS in ODI to point to EBS Instance using APPS User
b. Defined EBS R12 Source System and Clicked INITIALIZE. (Validated that the Initialization Process is completed without any Errors)
c. Selected the Approriate SOURCE ACCOUTING ENTITIES for R12 Source System
Now, when I define a new IMPORT LOCATION, I am unable to see any EBS related SOURCE SEGMENTS under DATA LOAD MAPPING Grid under Import Format
Is there something done incorrectly? Also strangely, I dont even see any RESPONSIBILITIES in the SOURCE ACCOUNTING ENTITES when I want to define the Drill Through feature
Thanks,
Mohit

One reason that you might not see entries in the segments drop down is due to the entries being filtered according to browser language or FDMEE user language settings for localization purposes. You might want to try adjusting the Setup > User Settings > User Language in FDMEE to see if that can make the segments appear.
We've got a US English EBS 12 source system to test with and if I change Setup > User Settings > User Language in FDMEE to something other than English United States then save and go back to the import format screen, segment drop down boxes are now completely empty. If I change back to en-us then they're back again. I believe that either the browser accept language or the User Language setting in FDMEE needs to match the 'base language' on the source system registration screen.
With a bit of luck that might be it

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

EBS R12.1.1 Installation error

Hi hussein/helios,
I am installing EBS R12.1.1 64bit on OEL 5.3 but I got error in DB creatiom phase :(
The following are some part of the error log file:
Executable : /u02/oradev/DEV/db/tech_st/11.1.0/bin/sqlplus
ADX-1101 : Rapid Install characterset conversion failed
           Error found while running addbccnv.sql
Cannot convert database characterset
    RW-50010: Error: - script has returned an error:   127
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for DEV instance
sqlplus: error while loading shared libraries: /u02/oradev/DEV/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
Database ORACLE_HOME connection test has succeeded
   command: su appldev -c "/StageR1211_64b/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.2/DEV_apex-dev.env APPS/APPS"
riwTDBup.sh started at Fri Feb 19 19:26:36 PHT 2010
Parameters passed are : /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.2/DEV_apex-dev.env APPS/APPS
Cannot find environment file /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.2/DEV_apex-dev.env
   RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 1
Configuration Upload
-------------------ADX Database Utility Finished---------------
Successful upload of config file at /u02/oradev/DEV/db/tech_st/11.1.0/appsutil/conf_DEV.txt
Environment File
   Database ORACLE_HOME environment file passes instantiated variables test:
      File = /u02/oradev/DEV/db/tech_st/11.1.0/DEV_apex-dev.env
   RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
      File = /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.3/DEV_apex-dev.env
   RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
      File = /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.2/DEV_apex-dev.env
   RW-50016: Error: - APPL_TOP environment file was not created:
      File = /u01/appldev/DEV/apps/apps_st/appl/DEV_apex-dev.env
   RW-50016: Error: - ADOVARS environment file was not created:
      File = /u01/appldev/DEV/apps/apps_st/appl/admin/adovars.env
   RW-50016: Error: - APPSCONFIG was not created:
      File = /u01/appldev/DEV/apps/apps_st/appl/admin/adconfig.txt
DBC File
   RW-00023: Error: - DBC file was not created:
      File = /u01/appldev/DEV/inst/apps/DEV_apex-dev/appl/fnd/12.0.0/secure/DEV.dbc
HTTPThe following is the complete log file info:
http://rapidshare.com/files/354167833/02191844.log.html
Please help.....
Thanks a lot
MsK

Hi MsK,
sqlplus: error while loading shared libraries: /u02/oradev/DEV/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore >segment prot after reloc: Permission deniedCan you confirm that you have disabled SELinux on your server? I've seen this error when installing the 11g RDBMS software on RHEL/OEL 5.x, when I forgot to turn off the SELinux option. SELinux is often enabled in a default install; it's easy to miss the option to turn it off.
Some references: Note 454196.1:      Document Title./sqlplus: error on libnnz11.so: cannot restore segment prot after reloc
Note 457458.1: How to Disable or set SELinux to Permissive mode
Regards,
John P.
http://only4left.jpiwowar.com

Date Format Display on report

Is there a way to set a custom date format on a report column? I am trying to use a format mask and it doesn't appear to be working. Maybe someone can spot my mistake:
Query: Hours Worked = Clock_IN - Clock_OUT
Format mask for Clock In/Clock Out - DD-MON-YYYY HH24:MI (from list)
Format mask for Hours Worked column: HH:MI (hand typed)
actual display (Timecard ID is edit link):
Timecard     Employee     Vehicle     Clock IN     Clock OUT     Hours Worked
6     20044     26045     30-JUN-2006 13:28     30-JUN-2006 13:31     +000000000 00:03:43.000000
28     20044     144     06-JUL-2006 10:11     06-JUL-2006 10:39     +000000000 00:28:43.000000
48     20044     144     07-JUL-2006 09:03     07-JUL-2006 16:30     +000000000 07:27:50.000000
108     20044     26045     18-JUL-2006 15:35
128     20044     144     19-JUL-2006 14:57     19-JUL-2006 15:02     +000000000 00:05:06.000000

These programs also..
GFW_PROG_BAR : Bar chart example
GFW_PROG_PIE: Pie chart example

Problem in Date format display at table leve in 3.1i System

Hi Team,
I am facing an issue in 3.1i Prod System.
When i go and check at SE16 transaction and table name is TCURR. Execute the same i am getting date displayed in an unknown format.
For Eg:
Valid From Date
79908769
When i double click the same record, it displays the correct date format:
12/30/2009
when i download the table contents into excel sheet it should display the correct date format: instead of 79908769 to 12/30/2009.
But my problem is either to display the proper format of date at the table level.
Is there anyway to download the contents in correct dated format without disturbing the data elements or domain at table level.
Please let me know how to solve this problem.
Thanks,
Sunil Kumar

You need to write abap program to download into the required format.
once you get the date field in your work area...
say you have date field in wa_data-budat , after that use the above syntax you will get the required format.
DATA :
v_date type sy-datum.
write wa_data-budat to v_date MM/DD/YYYY.
Please let me know if you need further information.
Regards
Satish Boguda

Date format display

Hi!
The date originally displayed in YYYY/MM/DD format. But, don't know what'd done, the date shown in DD-MMM-YYYY. I've set the NLS_DATE_FORMAT in registry.
Please tell me how to reset displaying date in YYYY/MM/DD format?
Thanks a lot.

hi
use this command
ALTER SESSION SET NLS_DATE_FORMAT= "YYYY/MM/DD";
go to
http://www.experts-exchange.com/Databases/Oracle/Q_10331751.html

OIM date format parsing error on reconciliation

Hi All,
I am using OIM 9.0.3 . When I do the recon , I am able to retrieve user from source and created in OIM ,but one of my field is DATE and which I have map to start date.
Recon Manager shows me that my date field having parsing error. I tried various date format ,but still the error is coming.
I don't know which format OIM expecting for date type data for I am missing something. Please tell me .
Thanks in Advance.

Hi All,
I created a GTC connector with following configuration
Staging Directory (Parent identity data): /home/GTC
Archiving Directory: /home/GTC/archive
File Prefix: PLC
Specified Delimiter: |
File Encoding UTF8
Source Date Format yyyy/MM/dd hh:mm:ss z
Reconcile Deletion of Multivalued Attribute Data check box cleared
Reconciliation Type Full
In the Configuration Mapping, I created a Status varaible and mapped it to OIM Object Status and changed the Data type of Last Logon TimeStamp to Date.
The Layout of flat file PLC.csv.txt is like this:
Account Name|Full Name|Domain|Last Logon Timestamp|Description|GUID|Mail|Employee ID|First Name|Last Name
PLC\!alders|Steve Alder|PLC.COM|2007/01/10 11:16:27|Directory and Messaging Services|E109B9F8-40BD-4E72-B336-B46600A5B38E|||Steve|Alder
PLC\!lewisj|Jonathan Lewis|PLC.COM||Data Centre Scheduled Activities Team|1D580887-EDEB-4C87-A079-837AFBAA782F|||Jonathan|Lewis
I am facing same kind of issues in which I am getting following error on flat file reconciliation;
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,inside getProvider......2
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,validationProviderclassname:com.thortech.xl.gc.impl.validation.IsFloatValidatorProvider, name:IsFloat
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,nameIsFloat
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,inside getProvider......2
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,validationProviderclassname:com.thortech.xl.gc.impl.validation.IsDoubleValidatorProvider, name:IsDouble
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,nameIsDouble
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,inside getProvider......2
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,validationProviderclassname:com.thortech.xl.gc.impl.validation.IsInRangeValidatorProvider, name:IsInRange
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,nameIsInRange
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,inside getProvider......2
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,validationProviderclassname:com.thortech.xl.gc.impl.validation.MatchRegexpValidatorProvider, name:MatchRegularExpression
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,nameMatchRegularExpression
DEBUG,24 Aug 2009 19:49:38,211,http://XELLERATE.GC.PROVIDERREGISTRATION,inside getProvider......2
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION,validationProviderclassname:com.thortech.xl.gc.impl.validation.ValidateDateFormat, name:ValidateDateFormat
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION,nameValidateDateFormat
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION,come in validationName.equalsIgnoreCase(name)
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION,inside getProviderClassName. ..found transformation provider.....
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION,inside getProviderClassName....provider class name = ..com.thortech.xl.gc.impl.validation.ValidateDateFormat
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION, provider nameValidateDateFormat
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION, provider def attribnull
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION, provider resp codes{}
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION,inside getProviderClassName. ..found transformation provider.....com.thortech.xl.gc.impl.validation.ValidateDateFormat
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.ADAPTERS,Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.ADAPTERS,Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,24 Aug 2009 19:49:38,212,http://XELLERATE.GC.PROVIDERREGISTRATION,Loading Provider Class -->com.thortech.xl.gc.impl.validation.ValidateDateFormat WARN,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.FRAMEWORKRECONCILIATION,Record failed on Validation and therefore would not be Reconciled*
+WARN,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.FRAMEWORKRECONCILIATION,Parent Data -->{Description=2029/03/07 09:01:11, Account Name=HRL\PUNEET, First Name=, Last Logon Timestamp=HRL1.CORP, Domain=Les, GUID=Hrl, Employee [email protected], Full Name=PUNEETKING, Mail=C7F1A30E-A0C7-444E-BA09-EC66E63831EB, Last Name=PUNEET}DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.SCHEDULER.TASK,Class/Method: SchedulerBaseTask/isStopped entered.+*
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.SCHEDULER.TASK,Class/Method: SchedulerBaseTask/isStopped left.
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,Class/Method: SharedDriveReconTransportProvider/getNextPage entered.
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,Class/Method: SharedDriveReconTransportProvider/getNextPage - Data: page size--> - Value: -1
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,pagesize-->-1
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,Class/Method: SharedDriveReconTransportProvider/end entered.
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,Class/Medthod: SharedDriveReconTransportProvider/end - Before calling: copyFilesToArchive(for Parent files)
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,Class/Method: SharedDriveReconTransportProvider/copyFilesToArchive entered.
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,Class/Method: SharedDriveReconTransportProvider/copyFilesToArchive - Data: src File--> - Value: LINUXRECON.COM.txt~
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,src File-->LINUXRECON.COM.txt~
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,Class/Method: SharedDriveReconTransportProvider/copyFilesToArchive - Data: stage Dir--> - Value: /home/GTC
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,stageDir-->/home/GTC
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,Class/Method: SharedDriveReconTransportProvider/copyFilesToArchive - Data: archive Dir--> - Value: /home/GTC/archive
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,archiveDir-->/home/GTC/archive
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,fis closed for /home/GTC/LINUXRECON.COM.txt~
DEBUG,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,fos closed for /home/GTC/archive/LINUXRECON.COM.txt~
INFO,24 Aug 2009 19:32:54,225,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,Info Data: file deleted --> - Value: true
WARN,24 Aug 2009 19:32:54,226,http://XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT,FILE SUCCESSFULLY ARCHIVED : /home/GTC/LINUXRECON.COM.txt~
I know the issue is with date format but I am not able to solve it after trying so many times with all kind of date formats.
Kindly help.
Thanks

APEX to EBS(R12.1.3) integration, Error while validating ICX session

Hi,
We have successfully integrated APEX page into EBS, i.e. we are able to invoke the APEX page from EBS Responsibility/Menu.
for APEX integration, we have installed APEX on separate OHS on the same server as EBS (and same domain) and in the Form Function HTML call we are using "GWY.jsp?targetAppType=APEX&p=160:10::" to invoke the APEX page.
Issue is, the APEX page displays error "ORA-06502: PL/SQL: numeric or value error: character string buffer too small", which we are not able to capture or supress.
but the page functions as expected and insert/update of tables working fine, in short everything is as expected except that error message.
In Before Header we are calling a custom procedure, which invokes "wfa_sec.getsession( l_username);" to validate the ICX session, this is raising the error.
when i try call "ICX_SEC.getsessioncookie" before the above procedure, it returns valid Session ID and call to "ICX_SEC.check_session" returns VALID; i am not sure why it is throwing error to validate an available Valid session?
All we want is to use the same ICX session in APEX page without need to pass the User name/password or re-login in APEX or set the User/Responsibility context again.
any help would be appriciated.
Rgds,
-Kamal
Edited by: Kamal on 30-Oct-2012 01:11

Try changing your target to:
GWY.jsp?targetAppType=APEX&p=160:10:::Yeswhich will enable debugging when launched.
Are you selecting information from icx_sessions into some variables (user_id, responsibility_id etc) for use in the VPD?
There isn't really any need to "wfa_sec.getsession( l_username);" - the following query should give you everything you need for an EBS context:
SELECT s.user_id,
        s.responsibility_id,
        s.responsibility_application_id,
        s.security_group_id,
        u.user_name
FROM icx_sessions s,
        fnd_user u
WHERE u.user_id = s.user_id
    AND s.session_id = icx_sec.getsessioncookie
    AND s.last_connect + NUMTODSINTERVAL( time_out, 'MINUTE') > SYSDATE;Select those into some protected application variables and then use fnd_global.apps_initialize() in the "initialization pl/sql code" section of APEX (VPD).
Then if you need anything in your application, you can use the variables in fnd_global (or the application items of course).

How do i get data when displaying error message in BDC

hi,
I have generated one internal table for displaying error message using BDCMSGCOLL, i want the the error to display according to the field name,
Hw can i get it...
ex: <Material name> Error message as name already created or unit doesnt exit...
Pls reply,
Regards,
Divi.

Hi Divya,
Try the below
CALL TRANSACTION 'MM01'
 USING bdcdata
 MODE 'N'
 MESSAGES INTO MSGTAB.
IF SY-SUBRC NE 0.
move itab-matnr to jtab-matnr.
append jtab.
PERFORM CHECK.
ENDIF.
FORM CHECK.
LOOP AT MSGTAB where msgtyp = 'E'.
read table jtab index sy-index.
write:/ jtab-matnr.
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
 LANGUAGE = sy-langu
 MSG_ID = MSGTAB-MSGID
 MSG_NO = MSGTAB-MSGNR
 MSG_VAR1 = MSGTAB-MSGV1(50)
 MSG_VAR2 = MSGTAB-MSGV2(50)
 MSG_VAR3 = MSGTAB-MSGV3(50)
 MSG_VAR4 = MSGTAB-MSGV4(50)
 IMPORTING
 MSG_TEXT = L_MSG
EXCEPTIONS
 FUNCTION_NOT_COMPLETED = 1
 MESSAGE_NOT_FOUND = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE: L_MSG.
ENDLOOP.
ENDFORM.
- Satish

JAEHYLEE (R12 IBY) Format Batch Error

Symptoms-
On 12.0.2 in Production:
payment batch the Format Payment Instruction Program 수행시 다음과 같은 에러 발생
ERROR
IBY_FD_PAYMENT_FORMAT module: Format Payment Instructions
SQLException occurred: ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "APPS.IBY_FD_EXTRACT_GEN_PVT", line 375
ORA-06512: at "APPS.IBY_FD_EXTRACT_GEN_PVT", line 205
ORA-06512: at "APPS.IBY_FD_EXTRACT_GEN_PVT", line 101
ORA-06512: at "APPS.IBY_EXTRACTGEN_PVT", line 76
ORA-06512: at line 1
Cause
Bug 6388935:Format payment instruction program error WITH ORA-01422"
Solution
To implement the solution, please execute the following steps:
기존의 Payment Instruction은 cancel처리후 one-off Patch 6500756 를 적용하여야 합니다. R12.0.2에서만 적용가능
Reference
464778.1

Hi,
Please see if (Note: 564536.1 - Release 12 : ADSTRTAL.sh returns error : TIMED OUT( 100000 ): INTERRUPTED EXCEPTION) helps.
Regards,
Hussein

How to get the HTML data formatted display using the Rrt template

hi,
I have a table which has data with html tags in it.
eg as shown below.
sample text is as follows:
 
MY TEST HERE HAS SOME BOLD TEXT IN IT. THIS WHOLE LINE SHOULD BE BOLD and the rest of the text will not be bold.
 
now I want to be able to display this text with the proper format using BI publisher / rt template.
my report shows the tags as is instead of being formatted.
please let me know how i can fix this
Thanks
knut

http://blogs.oracle.com/xmlpublisher/2007/01/02.

BIP in Oracle EBS R12.1 - Characters displayed as question marks

Hi,
We have recently upgraded to EBS 12.1.1, and have noticed that since doing so some characters in PDF outputs (from BIP reports run in EBS) are being displayed as question marks.
The Templates are created using the font Arial, and the characters that are being displayed incorrectly are 'long dashes' "–" (\endash) and where Microsoft Word has group three full stops together "..." (\'85)
An Example, the text in MS Word and in the PDF when run using Oracle BI Publisher Desktop is:
Three full stops ……………
A long dash –
A short dash -
However the output in PDF when running the report in EBS is:
Three full stops ?????
A long dash ?
A short dash -
Has anyone come across this before, or does anyone know of a way to resolve it. I have tried uploading an Arial font file and creating mappings (although Arial already exists as a seeded font file) but this has not resolved the issue.
Regards
Carl

Hello,
Check if you have all necessary fonts under your jre/lib/fonts ($AF_JRE_TOP and $OA_JRE_TOP) on all your web and concurrent nodes. Or, try to copy the fonts from $FND_TOP/resource (check post install steps for XMLP 5.6.3). Mid-tier bounce needed after copy.
Hope this helps.
Rownald

EBS R12 date format display error?

Similar Messages

Maybe you are looking for