EBS R12 RAC Clusterware Installation.

Hi hussein/helios
The Oracle support has installed a RAC on our EBS Prod server but it was a POC(proof of concept) only. So the name was TEST RAC instance.
Now, we want to install the final config setup named PROD following the docs he made on the TEST POC. We will also
reuse all the files, directories, and raw devices used in TEST as PROD. Meaning all the traces of files and home dirs of TEST will be renamed to PROD, and change ownerships from oratest to oraprod.
First, we run deinstall of all the TEST install software like the CRS, ASM. We also delete the traces of TEST on inittab and oraInventory.
Then we now installed first the CRS_PROD. But to our surprise the CRS installation failed , it seems that it still
can see the "test" setup :(
Failure at SlfAccess(/u02/oracle/oratest/product/11.1.0/crs) with code -1Note the we already deleted the above directory since it belongs to the old setup, while the existing is:
/u02/oracle/oratprod/product/11.1.0/crs
My question is, how do you completely cleanup or deinstall all the previous traces of CRS?
Thanks a lot,
Ms K

Hi;
Please check below link which could be helps you
http://www.idevelopment.info/data/Oracle/DBA_tips/Oracle10gRAC/CLUSTER_65.shtml
http://www.appsdba.com/blog/?p=155
http://appsfusion.blogspot.com/2007/11/steps-to-create-ocr-and-voting-disk-on.html
How to Restore CRS after accidentally run localconfig on RAC system [ID 747415.1
As i said before its better to move your thread OCR forum site
Regard
Helios

Similar Messages

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

EBS R12.1.1 Installation error

Hi hussein/helios,
I am installing EBS R12.1.1 64bit on OEL 5.3 but I got error in DB creatiom phase :(
The following are some part of the error log file:
Executable : /u02/oradev/DEV/db/tech_st/11.1.0/bin/sqlplus
ADX-1101 : Rapid Install characterset conversion failed
           Error found while running addbccnv.sql
Cannot convert database characterset
    RW-50010: Error: - script has returned an error:   127
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for DEV instance
sqlplus: error while loading shared libraries: /u02/oradev/DEV/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
Database ORACLE_HOME connection test has succeeded
   command: su appldev -c "/StageR1211_64b/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.2/DEV_apex-dev.env APPS/APPS"
riwTDBup.sh started at Fri Feb 19 19:26:36 PHT 2010
Parameters passed are : /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.2/DEV_apex-dev.env APPS/APPS
Cannot find environment file /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.2/DEV_apex-dev.env
   RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 1
Configuration Upload
-------------------ADX Database Utility Finished---------------
Successful upload of config file at /u02/oradev/DEV/db/tech_st/11.1.0/appsutil/conf_DEV.txt
Environment File
   Database ORACLE_HOME environment file passes instantiated variables test:
      File = /u02/oradev/DEV/db/tech_st/11.1.0/DEV_apex-dev.env
   RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
      File = /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.3/DEV_apex-dev.env
   RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
      File = /u01/appldev/DEV/inst/apps/DEV_apex-dev/ora/10.1.2/DEV_apex-dev.env
   RW-50016: Error: - APPL_TOP environment file was not created:
      File = /u01/appldev/DEV/apps/apps_st/appl/DEV_apex-dev.env
   RW-50016: Error: - ADOVARS environment file was not created:
      File = /u01/appldev/DEV/apps/apps_st/appl/admin/adovars.env
   RW-50016: Error: - APPSCONFIG was not created:
      File = /u01/appldev/DEV/apps/apps_st/appl/admin/adconfig.txt
DBC File
   RW-00023: Error: - DBC file was not created:
      File = /u01/appldev/DEV/inst/apps/DEV_apex-dev/appl/fnd/12.0.0/secure/DEV.dbc
HTTPThe following is the complete log file info:
http://rapidshare.com/files/354167833/02191844.log.html
Please help.....
Thanks a lot
MsK

Hi MsK,
sqlplus: error while loading shared libraries: /u02/oradev/DEV/db/tech_st/11.1.0/lib/libnnz11.so: cannot restore >segment prot after reloc: Permission deniedCan you confirm that you have disabled SELinux on your server? I've seen this error when installing the 11g RDBMS software on RHEL/OEL 5.x, when I forgot to turn off the SELinux option. SELinux is often enabled in a default install; it's easy to miss the option to turn it off.
Some references: Note 454196.1:      Document Title./sqlplus: error on libnnz11.so: cannot restore segment prot after reloc
Note 457458.1: How to Disable or set SELinux to Permissive mode
Regards,
John P.
http://only4left.jpiwowar.com

Vmware for RAC Installation for EBS R12

Hi,
I want to test installing RAC for EBS R12 on vmware. My OS is OEL 5.4
Can you help me setup vmware please? What the the pre-requisites?
Thanks a lot,
Ms K
Edited by: user_unlimited on Sep 2, 2010 12:22 AM

Hi Msk;
Is vmware for linux applicable to unix/AIX too?
Is there separate version of vmware for AIX? Can you give me links for VMware AIX please...AFAIK for No, i also find this:
http://communities.vmware.com/message/1084738 (No AIX runs on the PowerPC chip set, VMware only virtualised i386 instructions, it is virtualisation not emulation.)
You can also see details on:
http://www.vmware.com/pdf/GuestOS_guide.pdf
Regard
Helios

Autoconfig fail EBS R12 Apps-Node with EBS 11gR2 RAC

Platform: HPUX IA 64-11.31
DB: 11.2.0.3
Nodes: 2
We were following metalink note 823587.1 and have successfully converted single-instance database of EBS R12 to 20node RAC. When we are trying to do steps of Section-3.8 of the note the autoconfig is running in error. See the below error message from the "adconfig.log" file:
cat /etc/hosts
=========
127.0.0.1 localhost.localdomain localhost
#Public IP
172.16.101.23 ts1db1.bukhatir.ae ts1db1
172.16.101.24 ts1db2.bukhatir.ae ts1db2
#Vip
172.16.101.44 ts1_vip1.bukhatir.ae ts1_vip1
172.16.101.45 ts1_vip2.bukhatir.ae ts1_vip2
#inerconnect
10.0.0.1 ts1_prv1.bukhatir.ae ts1_prv1
10.0.0.2 ts1_prv2.bukhatir.ae ts1_prv2
172.16.101.20 ts1apps1.bukhatir.ae ts1apps1
172.16.101.21 ts1apps2.bukhatir.ae ts1apps2
=========
Generate Tns Names
Logfile: /locapps1/apps/apps/TEST_ts1apps1/admin/log/04101202/NetServiceHandler.log
Classpath : /ts1apps/apps/apps_st/comn/java/lib/appsborg2.zip:/ts1apps/apps/apps_st/comn/java/classes
Updating s_tnsmode to 'generateTNS'
UpdateContext exited with status: 0
AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
Error generating tnsnames.ora from the database, temporary tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 2
ERRORCODE = 2 ERRORCODE_END
xecuting script in InstantiateFile:
/locapps1/apps/apps/TEST_ts1apps1/admin/install/adgendbc.sh
script returned:
adgendbc.sh started at Tue Apr 10 12:03:56 UAE 2012
SQL*Plus: Release 10.1.0.5.0 - Production on Tue Apr 10 12:03:57 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
[ APPS_DATABASE_ID ]
Application Id : 0
Profile Value : TEST
Level Name: SITE
INFO : Updated/created profile option value.
PL/SQL procedure successfully completed.
Commit complete.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
==============================
* * * * DBC PARAMETERS * * * *
==============================
fnd_jdbc_buffer_min=1
fnd_jdbc_buffer_max=5
fnd_jdbc_buffer_decay_interval=300
fnd_jdbc_buffer_decay_size=5
fnd_jdbc_usable_check=false
fnd_jdbc_context_check=true
fnd_jdbc_plsql_reset=false
====================================
* * * * NO CUSTOM PARAMETERS * * * *
====================================
Unique constraint error (00001) is OK if key already exists
Creating the DBC file...
java.sql.SQLException: The Network Adapter could not establish the connection
Database connection to jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip2.bukhatir.ae)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=TEST))) failed
ADD call failed with exit code 1
Updating Server Security Authentication
java.sql.SQLException: Invalid number format for port number
Database connection to jdbc:oracle:thin:@host_name:port_number:database failed
Updating Server Security Authentication failed with exit code 1
Restoring DBC file from backed up location /locapps1/apps/apps/TEST_ts1apps1/appltmp/TXK/TEST_Tue_Apr_10_12_03_2012.dbc
adgendbc.sh ended at Tue Apr 10 12:04:01 UAE 2012
adgendbc.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
See the network configuration files from the environment:
===========
Dbhome
===========
/orahome/oradb/app/product/11.2.0.3/network/admin/TEST1_ts1db1/listener.ora
LISTENER_TEST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ts1_vip1.bukhatir.ae)(PORT = 1521)(IP = FIRST)))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ts1db1)(PORT = 1521)(IP = FIRST)))
SID_LIST_LISTENER_TEST =
(SID_LIST =
(SID_DESC = (ORACLE_HOME = /orahome/oradb/app/product/11.2.0.3)(SID_NAME = TEST1))
STARTUP_WAIT_TIME_LISTENER_TEST = 0
CONNECT_TIMEOUT_LISTENER_TEST = 10
TRACE_LEVEL_LISTENER_TEST = OFF
LOG_DIRECTORY_LISTENER_TEST = /orahome/oradb/app/product/11.2.0.3/network/admin
LOG_FILE_LISTENER_TEST = TEST1
TRACE_DIRECTORY_LISTENER_TEST = /orahome/oradb/app/product/11.2.0.3/network/admin
TRACE_FILE_LISTENER_TEST = TEST1
ADMIN_RESTRICTIONS_LISTENER_TEST = ON
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER_TEST = OFF
IFILE=/orahome/oradb/app/product/11.2.0.3/network/admin/TEST1_ts1db1/listener_ifile.ora
/orahome/oradb/app/product/11.2.0.3/network/admin/TEST1_ts1db1/tnsnames.ora
TEST=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
(INSTANCE_NAME=TEST1)
TEST1=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
(INSTANCE_NAME=TEST1)
TEST1_FO=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
(INSTANCE_NAME=TEST1)
TEST_FO=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
(INSTANCE_NAME=TEST1)
TEST1_LOCAL=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
TEST_BALANCE=
(DESCRIPTION=
(ADDRESS_LIST=
(LOAD_BALANCE=YES)
(FAILOVER=YES)
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
TEST_REMOTE=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
#TEST_REMOTE=
# (DESCRIPTION=
# (ADDRESS_LIST=
# (ADDRESS=(PROTOCOL=tcp)(HOST=tsscan.bukhatir.ae)(PORT=1521))
TEST1_local=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip1.bukhatir.ae)(PORT=1521))
extproc_connection_data =
(DESCRIPTION=
(ADDRESS_LIST =
(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCTEST1))
(CONNECT_DATA=
(SID=PLSExtProc)
(PRESENTATION = RO)
IFILE=/orahome/oradb/app/product/11.2.0.3/network/admin/TEST1_ts1db1/TEST1_ts1db1_ifile.ora
===========
Gridhome
===========
/gridhome/oragrid/11.2.0/grid/network/admin/listener.ora
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
/gridhome/oragrid/11.2.0/grid/network/admin/endpoints_listener.ora
LISTENER_TS1DB1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ts1_vip1)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.101.23)(PORT=1521)(IP=FIRST)))) # line
added by Agent
===========
Listener EBShome
===========
cd $TNS_ADMIN
/locapps1/apps/apps/TEST_ts1apps1/ora/10.1.2/network/admin/listener.ora
APPS_TEST =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= TCP)(Host= ts1apps1)(Port= 1629))
SID_LIST_APPS_TEST =
(SID_LIST =
( SID_DESC = ( SID_NAME = FNDSM )
( ORACLE_HOME = /ts1apps/apps/tech_st/10.1.2 )
( PROGRAM = /ts1apps/apps/apps_st/appl/fnd/12.0.0/bin/FNDSM )
( envs='MYAPPSORA=/ts1apps/apps/apps_st/appl/APPSTEST_ts1apps1.env,PATH=/usr/bin:/usr/ccs/bin:/bin,FNDSM_SCRIPT=/locapps1/apps/apps/TEST_ts1apps1/admin/scripts/gsmst
art.sh' )
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /ts1apps/apps/tech_st/10.1.2 )
( PROGRAM = /ts1apps/apps/apps_st/appl/fnd/12.0.0/bin/FNDFS )
( envs='EPC_DISABLED=TRUE,NLS_LANG=American_America.AL32UTF8,LD_LIBRARY_PATH=/ts1apps/apps/tech_st/10.1.2/lib32:/ts1apps/apps/tech_st/10.1.2/lib:/ts1apps/apps/tech_s
t/10.1.2/jdk/jre/lib/IA64N:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N/server:/ts1apps/apps/apps_st/appl/sht/12.0.0/lib,SHLIB_PATH=/ts1apps/apps/tech_st/10.1.2/lib32:/ts1apps/apps
/tech_st/10.1.2/lib:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N/server:/ts1apps/apps/apps_st/appl/sht/12.0.0/lib,LIBPATH=/ts1apps/ap
ps/tech_st/10.1.2/lib32:/ts1apps/apps/tech_st/10.1.2/lib:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N:/ts1apps/apps/tech_st/10.1.2/jdk/jre/lib/IA64N/server:/ts1apps/apps/apps_st/ap
pl/sht/12.0.0/lib,APPLFSTT=TEST_BALANCE;TEST;TEST_FO,APPLFSWD=/locapps1/apps/apps/TEST_ts1apps1/appl/admin;/locapps1/apps/apps/TEST_ts1apps1/appltmp;/ts1apps/apps/apps_st/comn/webapp
s/oacore/html/oam/nonUix/launchMode/restricted' )
STARTUP_WAIT_TIME_APPS_TEST = 0
CONNECT_TIMEOUT_APPS_TEST = 10
TRACE_LEVEL_APPS_TEST = OFF
LOG_DIRECTORY_APPS_TEST = /locapps1/apps/apps/TEST_ts1apps1/logs/ora/10.1.2/network
LOG_FILE_APPS_TEST = APPS_TEST
TRACE_DIRECTORY_APPS_TEST = /locapps1/apps/apps/TEST_ts1apps1/logs/ora/10.1.2/network
TRACE_FILE_APPS_TEST = APPS_TEST
ADMIN_RESTRICTIONS_APPS_TEST = ON
IFILE = /locapps1/apps/apps/TEST_ts1apps1/ora/10.1.2/network/admin/TEST_ts1apps1_listener_ifile.ora
SUBSCRIBE_FOR_NODE_DOWN_EVENT_APPS_TEST = OFF
/locapps1/apps/apps/TEST_ts1apps1/ora/10.1.2/network/admin/tnsnames.ora
TEST = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1db1)(PORT=1521))
(CONNECT_DATA=(SID=TEST1))
# Net8 definitions for FNDFS and FNDSM on the HTTP server node - ts1apps1
FNDFS_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
# For when the profile FS_SVC_PREFIX is set these entries will be used
FNDFS_TEST1_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_TEST1_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDSM_ts1apps1_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
FNDSM_ts1apps1.bukhatir.ae_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
# Net8 definitions for FNDFS and FNDSM on the forms server node - ts1apps1
FNDFS_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
# For when the profile FS_SVC_PREFIX is set these entries will be used
FNDFS_TEST1_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_TEST1_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDSM_ts1apps1_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
FNDSM_ts1apps1.bukhatir.ae_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
# Net8 definitions for FNDFS and FNDSM on the administration server node - ts1apps1
FNDFS_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
# For when the profile FS_SVC_PREFIX is set these entries will be used
FNDFS_TEST1_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_TEST1_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDSM_ts1apps1_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
FNDSM_ts1apps1.bukhatir.ae_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
# Net8 definitions for FNDFS and FNDSM on the concurrent processing server node - ts1apps1
FNDFS_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
# For when the profile FS_SVC_PREFIX is set these entries will be used
FNDFS_TEST1_ts1apps1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDFS_TEST1_ts1apps1.bukhatir.ae = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDFS))
FNDSM_ts1apps1_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
FNDSM_ts1apps1.bukhatir.ae_TEST1 = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ts1apps1)(PORT=1629))
(CONNECT_DATA=(SID=FNDSM))
IFILE=/locapps1/apps/apps/TEST_ts1apps1/ora/10.1.2/network/admin/TEST_ts1apps1_ifile.ora

Yes, following message is also reported in the adconfig.log:
Unique constraint error (00001) is OK if key already exists
Creating the DBC file...
java.sql.SQLException: The Network Adapter could not establish the connection
Database connection to jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=ts1_vip2.bukhatir.ae)(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=
ts1_vip1.bukhatir.ae)(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=TEST))) failed
ADD call failed with exit code 1
Updating Server Security Authentication
java.sql.SQLException: Invalid number format for port number
Database connection to jdbc:oracle:thin:@host_name:port_number:database failed
Updating Server Security Authentication failed with exit code 1
Restoring DBC file from backed up location /locapps1/apps/apps/TEST_ts1apps1/appltmp/TXK/TEST_Mon_Apr_16_13_13_2012.dbc
adgendbc.sh ended at Mon Apr 16 13:13:46 UAE 2012
adgendbc.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
Did you see Autoconfig has failed on Apps tier on adgendbc.cmd with error: ADD call failed with exit code 1, UPDATE call failed with exit code 1 [ID 359739.1]?But we have the file version:
$Header: AdminAppServer.java 120.11.12010000.6 2010/04/13 15:24:03 fskinner ship $

Issue in Installation of EBS R12 through VNCserver thrgh Putty

Hi Guys,
I know this may sound quite childish but still i wanna know If we are Installing EBS R12/11i by connecting the Linux box through putty OR by connecting through VNC server .
If we r connecting through putty do we 've to set the Display in this case.
Or if If we r connecting through VNC Server do we 've to set the Display variable.
My query is what is the Differences between using VNC server & putty in Installation of EBS r12/11i.
Today my Boss pointed out that i should install vnc server on windows for installing EBS rather than using putty as it required setting of Display variable.
which i couldn't quite understand. Hence the query !!
Really Appreciate if u could explain it a little bit more.
Thanks & Regards
MZ.

I know this may sound quite childish but still i wanna know If we are Installing EBS R12/11i by connecting the Linux box through putty OR by connecting through VNC server .
If we r connecting through putty do we 've to set the Display in this case.
Or if If we r connecting through VNC Server do we 've to set the Display variable. You cannot set DISPLAY when using putty so you will have to use VNC.
My query is what is the Differences between using VNC server & putty in Installation of EBS r12/11i.
Today my Boss pointed out that i should install vnc server on windows for installing EBS rather than using putty as it required setting of Display variable.
which i couldn't quite understand. Hence the query !!
Really Appreciate if u could explain it a little bit more.To run Rapid Install you need to have the DISPLAY set properly to see RapidWiz, and this would work with VNC (not with putty). If you can set the DISPLAY is putty (issue xclock to verify) then you can use it (which I believe is not possible).
Thanks,
Hussein

Oracle EBS R12 installation problem in Windows 2003

Hi,
I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
I had downloaded md5sum_windows.txt and also run this command :
md5sum --check md5sum_Windows.txt > md5sum_result.txt
In md5sum_result.txt, I am getting error for all files. Error message is as :
oraAppDB\Disk1\data\driver\Disk1.drv
: FAILED open or read
This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
Edited by: 855292 on Nov 26, 2011 1:58 AM
A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
Edited by: 855292 on Nov 26, 2011 2:00 AM

I have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
For R12 (12.1.1) you need to download the following files:
From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
Thanks,
Hussein

NON RAC to RAC migration oracle ebs R12 (12.1.2) 11g R2 Database (11.2.0.1)

Hi ALL,
Please suggest since we are in planing to go for RAC my environment is as :
EBS R12 (12.1.2)
Database 11gR2 (11.2.0.1)
Currently i am on NON ASM .
---------------------------------------Kindly provide me steps to implement the same since i have seen the MOS ID 1072636.1 but not able to get so please provide me steps.
Best Regards,

Please suggest since we are in planing to go for RAC my environment is as :
EBS R12 (12.1.2)
Database 11gR2 (11.2.0.1)
Currently i am on NON ASM .
---------------------------------------Kindly provide me steps to implement the same since i have seen the MOS ID 1072636.1 but not able to get so please provide me steps.All the steps are documented in (Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]).
Thanks,
Hussein

Oracle EBS R12.1.3 High Availability with RAC 11g on VMWARE

Dear All,
Our customer requirement is of high availability and good utilization of hardware for EBS R12.13 implementation.As per our strategy we want to use Oracle VM(I think it doesn't require any licensing) , RAC 11gR2 and appstier load balancing.We have only two servers to achieve all these.One one node there will be two VMs one for dbtier and another one for appstier and same will be on second server.So this way we will be having four virtual machines on two physical nodes.For all these we will use OEL Linux as Operating system
Please share your experiences , if above deployment model is correct or need further enhancements.
Regards.

Our customer requirement is of high availability and good utilization of hardware for EBS R12.13 implementation.As per our strategy we want to use Oracle VM(I think it doesn't require any licensing) , Please contact your Oracle Sales representative for license questions.
RAC 11gR2 and appstier load balancing.We have only two servers to achieve all these.One one node there will be two VMs one for dbtier and another one for appstier and same will be on second server.So this way we will be having four virtual machines on two physical nodes.For all these we will use OEL Linux as Operating system
Please share your experiences , if above deployment model is correct or need further enhancements.Please see these docs.
Using Oracle VM Templates for Oracle E-Business Suite [ID 975734.1]
Using Oracle VM with Oracle E-Business Suite Release 11i or Release 12 [ID 465915.1]
Oracle E-Business Suite High Availability on Oracle VM [ID 986690.1]
Certified Software on Oracle VM [ID 464754.1]
Oracle VM General Frequently Asked Questions [ID 464756.1]
Thanks,
Hussein

Step By Step Implementation of RAC in Oracle EBS R12 (version 12.0.4)

Hi,
Can anyne suggest me any Document in metalink or any other useful document on the
*"Step By Step Implementation of RAC in Oracle EBS R12 (version 12.0.4)"*.
My Database Version is 10g Enterprise Edition Release 10.2.0.4.0 and my Platform is HP-UX ia64.

How To Find Out The Example of The LOCAL_LISTENER and REMOTE_LISTENER Defined In The init.ora When configuring the 11i or R12 on RAC ? [ID 744508.1]
1072636.1 - Oracle E-Business Suite Release 12 High Availability Documentation Roadmap
Please check Hussein's discussion before
Rac and R12
R12 with RAC
Rac and R12
Moving from NON-RAC to RAC
R12 and RAC
Re: R12.1-RAC
EBS R12 on Linux with RAC

Converting EBS R12 database to RAC 11gR2

We are on EBS R12 with 11gR2 database. I read the document 823587.1 with emphasis on Section 3. We are planning to convert the existing EBS database to a 2-node RAC on new servers.
1. Install 11gR2 Grid Infrastructure on new servers.
2. Install 11gR2 database software on the 2 nodes with local disk.
3. Configure listener.
4. Implement and run Autoconfig on the 2 nodes.
5. Start Application processes.
I am not clear about how the data is migrated to the new servers with shared disk using ASM. How is this part done? Mind you, we are moving from a single node server to two brand new servers. I understand that part of using rconfig to convert from single node database to 2 node RAC. But we are not planning to use the existing database server as part of new RAC environment. Thanks.

It sounds like you are trying to build out new boxes.
The Shared Storage will have to be setup first with the datafiles/control files, then you could clone the database to the new servers. with RMAN or some other method.
Your Sysadmin (Unix) should be able to help setting up the shared storage. then on the clone based on how you do it. The Datafiles can be mapped to the new storage area and/or ASM. The Tasks are slightly different.

EBS R12 Installation on Windows XP

Hi All,
I have installed the EBS R12 Vision on the Windows XP and the installation went successful without any issues. But when i submit the Concurrent Programs, i get an Inactive - No Manager. I have started the OracleConcMgr process from the Windows services but still getting this error.
On the Administer Concurrent Managers, i could see like below:
Name Actual Target Running Pending
Internal Manager 1 1 0 0
Standard Manager 0 3 0 20
ps -ef | grep -i FNDLIBR returns nothing
Could someone tell me the steps on how to make the Concurrent Manager active so that i could run the Concurrent Programs?
This is from the Standard Manager/Internal Manager log:
Application Object Library: Concurrent Processing version 11.5
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Internal Concurrent Manager started : 07-FEB-2010 17:03:21
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Process monitor session started : 07-FEB-2010 17:03:23
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Starting RCVOLTM Concurrent Manager : 07-FEB-2010 17:03:24
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Starting RCVOLTM14 Concurrent Manager : 07-FEB-2010 17:03:26
Starting PODAMGR Concurrent Manager : 07-FEB-2010 17:03:26
Starting CRPINQMGR Concurrent Manager : 07-FEB-2010 17:03:26
Starting INVTMRPM Concurrent Manager : 07-FEB-2010 17:03:27
Starting XDP_Q_WI_SVC Concurrent Manager : 07-FEB-2010 17:03:27
Starting WFWSSVC Concurrent Manager : 07-FEB-2010 17:03:28
Starting WFMLRSVC Concurrent Manager : 07-FEB-2010 17:03:28
Starting WFALSNRSVC Concurrent Manager : 07-FEB-2010 17:03:30
Starting XDP_APPL_SVC Concurrent Manager : 07-FEB-2010 17:03:31
Starting XDP_Q_TIMER_SVC Concurrent Manager : 07-FEB-2010 17:03:33
Starting XDP_Q_IN_MSG_SVC Concurrent Manager : 07-FEB-2010 17:03:35
Starting XDP_Q_EVENT_SVC Concurrent Manager : 07-FEB-2010 17:03:38
Starting XDP_Q_FE_READY_SVC Concurrent Manager : 07-FEB-2010 17:03:39
Starting XDP_Q_FA_SVC Concurrent Manager : 07-FEB-2010 17:03:44
Starting FNDCPOPP Concurrent Manager : 07-FEB-2010 17:03:45
Starting XDP_Q_ORDER_SVC Concurrent Manager : 07-FEB-2010 17:03:47
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 17:03:48
Starting FNDCRM Concurrent Manager : 07-FEB-2010 17:03:50
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 17:03:52
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 17:03:53
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 17:03:53
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 17:03:54
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 17:03:54
Starting STANDARD Concurrent Manager : 07-FEB-2010 17:03:55
Starting STANDARD Concurrent Manager : 07-FEB-2010 17:03:55
Starting STANDARD Concurrent Manager : 07-FEB-2010 17:03:55
Starting PASMGR Concurrent Manager : 07-FEB-2010 17:03:55
Starting INVMGR Concurrent Manager : 07-FEB-2010 17:03:55
Starting MRPMGR Concurrent Manager : 07-FEB-2010 17:03:55
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 17:03:56
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 17:03:56
Process monitor session ended : 07-FEB-2010 17:03:56
Process monitor session started : 07-FEB-2010 17:23:57
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(4608), cpid=(1297857), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 17:23:58
Starting FNDCRM Concurrent Manager : 07-FEB-2010 17:23:58
Starting INVMGR Concurrent Manager : 07-FEB-2010 17:23:59
Starting MRPMGR Concurrent Manager : 07-FEB-2010 17:23:59
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 17:23:59
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 17:24:00
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 17:24:00
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 17:24:00
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 17:24:00
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 17:24:00
Starting PASMGR Concurrent Manager : 07-FEB-2010 17:24:01
Starting STANDARD Concurrent Manager : 07-FEB-2010 17:24:01
Starting STANDARD Concurrent Manager : 07-FEB-2010 17:24:01
Starting STANDARD Concurrent Manager : 07-FEB-2010 17:24:01
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 17:24:01
Process monitor session ended : 07-FEB-2010 17:24:02
Process monitor session started : 07-FEB-2010 17:44:02
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(5096), cpid=(1297872), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 17:44:03
Starting FNDCRM Concurrent Manager : 07-FEB-2010 17:44:03
Starting INVMGR Concurrent Manager : 07-FEB-2010 17:44:03
Starting MRPMGR Concurrent Manager : 07-FEB-2010 17:44:04
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 17:44:04
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 17:44:04
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 17:44:04
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 17:44:04
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 17:44:05
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 17:44:05
Starting PASMGR Concurrent Manager : 07-FEB-2010 17:44:05
Starting STANDARD Concurrent Manager : 07-FEB-2010 17:44:05
Starting STANDARD Concurrent Manager : 07-FEB-2010 17:44:05
Starting STANDARD Concurrent Manager : 07-FEB-2010 17:44:06
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 17:44:06
Process monitor session ended : 07-FEB-2010 17:44:06
Process monitor session started : 07-FEB-2010 18:04:06
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(5964), cpid=(1297887), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 18:04:07
Starting FNDCRM Concurrent Manager : 07-FEB-2010 18:04:08
Starting INVMGR Concurrent Manager : 07-FEB-2010 18:04:08
Starting MRPMGR Concurrent Manager : 07-FEB-2010 18:04:08
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 18:04:08
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 18:04:09
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 18:04:09
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 18:04:09
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 18:04:09
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 18:04:10
Starting PASMGR Concurrent Manager : 07-FEB-2010 18:04:10
Starting STANDARD Concurrent Manager : 07-FEB-2010 18:04:10
Starting STANDARD Concurrent Manager : 07-FEB-2010 18:04:10
Starting STANDARD Concurrent Manager : 07-FEB-2010 18:04:10
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 18:04:10
Process monitor session ended : 07-FEB-2010 18:04:11
Process monitor session started : 07-FEB-2010 18:24:11
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(3784), cpid=(1297902), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 18:24:12
Starting FNDCRM Concurrent Manager : 07-FEB-2010 18:24:12
Starting INVMGR Concurrent Manager : 07-FEB-2010 18:24:12
Starting MRPMGR Concurrent Manager : 07-FEB-2010 18:24:12
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 18:24:13
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 18:24:13
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 18:24:13
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 18:24:13
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 18:24:14
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 18:24:14
Starting PASMGR Concurrent Manager : 07-FEB-2010 18:24:14
Starting STANDARD Concurrent Manager : 07-FEB-2010 18:24:14
Starting STANDARD Concurrent Manager : 07-FEB-2010 18:24:14
Starting STANDARD Concurrent Manager : 07-FEB-2010 18:24:15
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 18:24:15
Process monitor session ended : 07-FEB-2010 18:24:15
Process monitor session started : 07-FEB-2010 18:44:15
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(7020), cpid=(1297917), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 18:44:17
Starting FNDCRM Concurrent Manager : 07-FEB-2010 18:44:17
Starting INVMGR Concurrent Manager : 07-FEB-2010 18:44:18
Starting MRPMGR Concurrent Manager : 07-FEB-2010 18:44:18
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 18:44:18
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 18:44:18
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 18:44:19
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 18:44:19
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 18:44:19
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 18:44:19
Starting PASMGR Concurrent Manager : 07-FEB-2010 18:44:19
Starting STANDARD Concurrent Manager : 07-FEB-2010 18:44:20
Starting STANDARD Concurrent Manager : 07-FEB-2010 18:44:20
Starting STANDARD Concurrent Manager : 07-FEB-2010 18:44:20
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 18:44:20
Process monitor session ended : 07-FEB-2010 18:44:20
Process monitor session started : 07-FEB-2010 19:04:21
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(7004), cpid=(1297932), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 19:04:22
Starting FNDCRM Concurrent Manager : 07-FEB-2010 19:04:22
Starting INVMGR Concurrent Manager : 07-FEB-2010 19:04:22
Starting MRPMGR Concurrent Manager : 07-FEB-2010 19:04:22
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 19:04:22
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 19:04:23
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 19:04:23
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 19:04:23
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 19:04:23
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 19:04:24
Starting PASMGR Concurrent Manager : 07-FEB-2010 19:04:24
Starting STANDARD Concurrent Manager : 07-FEB-2010 19:04:24
Starting STANDARD Concurrent Manager : 07-FEB-2010 19:04:24
Starting STANDARD Concurrent Manager : 07-FEB-2010 19:04:24
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 19:04:25
Process monitor session ended : 07-FEB-2010 19:04:25
Process monitor session started : 07-FEB-2010 19:24:25
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(740), cpid=(1297947), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 19:24:26
Starting FNDCRM Concurrent Manager : 07-FEB-2010 19:24:27
Starting INVMGR Concurrent Manager : 07-FEB-2010 19:24:27
Starting MRPMGR Concurrent Manager : 07-FEB-2010 19:24:27
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 19:24:27
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 19:24:27
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 19:24:28
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 19:24:28
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 19:24:28
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 19:24:28
Starting PASMGR Concurrent Manager : 07-FEB-2010 19:24:28
Starting STANDARD Concurrent Manager : 07-FEB-2010 19:24:29
Starting STANDARD Concurrent Manager : 07-FEB-2010 19:24:29
Starting STANDARD Concurrent Manager : 07-FEB-2010 19:24:29
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 19:24:29
Process monitor session ended : 07-FEB-2010 19:24:29
Process monitor session started : 07-FEB-2010 19:44:30
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(5604), cpid=(1297962), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 19:44:30
Starting FNDCRM Concurrent Manager : 07-FEB-2010 19:44:31
Starting INVMGR Concurrent Manager : 07-FEB-2010 19:44:31
Starting MRPMGR Concurrent Manager : 07-FEB-2010 19:44:31
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 19:44:31
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 19:44:31
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 19:44:32
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 19:44:32
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 19:44:32
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 19:44:32
Starting PASMGR Concurrent Manager : 07-FEB-2010 19:44:32
Starting STANDARD Concurrent Manager : 07-FEB-2010 19:44:32
Starting STANDARD Concurrent Manager : 07-FEB-2010 19:44:33
Starting STANDARD Concurrent Manager : 07-FEB-2010 19:44:33
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 19:44:33
Process monitor session ended : 07-FEB-2010 19:44:33
Process monitor session started : 07-FEB-2010 20:04:33
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(5484), cpid=(1297977), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 20:04:34
Starting FNDCRM Concurrent Manager : 07-FEB-2010 20:04:35
Starting INVMGR Concurrent Manager : 07-FEB-2010 20:04:35
Starting MRPMGR Concurrent Manager : 07-FEB-2010 20:04:35
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 20:04:35
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 20:04:36
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 20:04:36
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 20:04:36
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 20:04:36
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 20:04:36
Starting PASMGR Concurrent Manager : 07-FEB-2010 20:04:37
Starting STANDARD Concurrent Manager : 07-FEB-2010 20:04:37
Starting STANDARD Concurrent Manager : 07-FEB-2010 20:04:37
Starting STANDARD Concurrent Manager : 07-FEB-2010 20:04:37
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 20:04:38
Process monitor session ended : 07-FEB-2010 20:04:38
Process monitor session started : 07-FEB-2010 20:24:38
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(5108), cpid=(1297992), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 20:24:39
Starting FNDCRM Concurrent Manager : 07-FEB-2010 20:24:39
Starting INVMGR Concurrent Manager : 07-FEB-2010 20:24:40
Starting MRPMGR Concurrent Manager : 07-FEB-2010 20:24:40
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 20:24:40
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 20:24:40
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 20:24:40
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 20:24:40
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 20:24:40
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 20:24:41
Starting PASMGR Concurrent Manager : 07-FEB-2010 20:24:41
Starting STANDARD Concurrent Manager : 07-FEB-2010 20:24:41
Starting STANDARD Concurrent Manager : 07-FEB-2010 20:24:41
Starting STANDARD Concurrent Manager : 07-FEB-2010 20:24:41
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 20:24:41
Process monitor session ended : 07-FEB-2010 20:24:42
07-FEB-2010 20:40:42
Request : 4423361
Priority : 0
Program : 0/3
State : Q
Process monitor session started : 07-FEB-2010 20:40:43
setClassPath: Unable to get PATH from environment or registry!:
The operation completed successfully.
Found dead process: spid=(2780), cpid=(1298007), Service Instance=(1046)
Starting XDP_CTRL_SVC Concurrent Manager : 07-FEB-2010 20:40:46
Starting FNDCRM Concurrent Manager : 07-FEB-2010 20:40:47
Starting INVMGR Concurrent Manager : 07-FEB-2010 20:40:48
Starting MRPMGR Concurrent Manager : 07-FEB-2010 20:40:48
Starting XDP_MANAGER Concurrent Manager : 07-FEB-2010 20:40:49
Starting WMSTAMGR Concurrent Manager : 07-FEB-2010 20:40:49
Starting IEU_WL_CS Concurrent Manager : 07-FEB-2010 20:40:50
Starting OAMCOLMGR Concurrent Manager : 07-FEB-2010 20:40:51
Starting FTE_TXN_MANAGER Concurrent Manager : 07-FEB-2010 20:40:51
Starting AMSDMIN Concurrent Manager : 07-FEB-2010 20:40:51
Starting PASMGR Concurrent Manager : 07-FEB-2010 20:40:51
Starting STANDARD Concurrent Manager : 07-FEB-2010 20:40:52
Starting STANDARD Concurrent Manager : 07-FEB-2010 20:40:52
Starting STANDARD Concurrent Manager : 07-FEB-2010 20:40:52
Starting IEU_SH_CS Concurrent Manager : 07-FEB-2010 20:40:52
Process monitor session ended : 07-FEB-2010 20:40:53
Thanks.
Raghu

Hi Hussein,
Thanks for the immediate reply.
The last line says "Make sure that environment files (.cmd) do not have duplicate and/or extra entries". Could you let me know what are the environment files that i need to look and the directory path where i could find those files?
Raghu

Heterogeneous oracle EBS R12 installation

To install Heterogeneous oracle EBS R12 ( database is in linux and oracle EBS is on Solaris), we don't know how to proceed. Please clarify it.
1) Do you have Heterogeneous oracle EBS R12 binaries to install ?
2) Please guide to install Heterogeneous oracle EBS R12
Please suggest us, how to proceed with installation of R12.
Details :
EBS version : 11.5.10.2 on Solaris 5
Database version : 10.2.0.4 on linux 5 64 bit .
Regards .

Hi;
This config is called split configuration. Please see below links:
Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 [ID 343917.1] <search as split
Using Oracle EBS with a Split Configuration Database Tier on 11gR2 [ID 946413.1]
Regard
Helios

Oracle EBS R12.1.1 for Windows Installation

Hi,
Is there a way to install Oracle EBS R12 for Windows (using the express install) without providing the Unix Tookit Directory, Visual Studio Directory, and the Domain info? I do not know where to get these configuration information. Please help.
Thanks,

Hi,
You cannot install Oracle E-Business Suite 11i/R12 without installing all pre-req. OS software. To get these software packages, you need to contact the vendors (the links are referenced in the document below).
Note: 761567.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=761567.1
Regards,
Hussein

Packages,patches,RPM required in Oracle Linux 6 for EBS R12 installation.

Hello,
I am a not a newbie and i am trying to do a vision installation of Oracle EBS R12 on my laptop.
I have downloaded Oracle Enterprise Linux release 6 update 3 media pack from edelivery.com and installed Oracle Linux on Vmware workstaion.
Now i want to know what all patches, packages and RPM's are required as a pre-requisite before proceeding with installation of R12.
How to check whether they are already present and how to install them.
I have referred to oracle notes but confused in which points to follow and which to skip.
Please guide.
Thanks,
Swapnil

swapnil_yeole wrote:
Hello,
I am a not a newbie and i am trying to do a vision installation of Oracle EBS R12 on my laptop.
I have downloaded Oracle Enterprise Linux release 6 update 3 media pack from edelivery.com and installed Oracle Linux on Vmware workstaion.
Now i want to know what all patches, packages and RPM's are required as a pre-requisite before proceeding with installation of R12.
How to check whether they are already present and how to install them.
I have referred to oracle notes but confused in which points to follow and which to skip.
Please guide.
Thanks,
SwapnilAll OS packages and rpms can be found in these docs.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Use "rpm -qa" command to verify if the package is installed or not.
To install the packages, please use "yum install" or "rpm -Uvh" command.
Thanks,
Hussein

EBS R12 RAC Clusterware Installation.

Similar Messages

Maybe you are looking for