EBS R12 Shared Printer Setup

Hi guys
We are using EBS R12 (12.0.6) and the environment is linux 64bit (RHEL 5.x). Right now all our concurrent jobs are producting .pdf outputs for Sales Orders, RMA etc. Our trading (retail) sector has a performance issue due to the time waiting for the pdf to popup and then to print etc.
Hence we are analyzing the possibilities of sending the outputs straight to the printers (at present no printers are configured) to avoid the above said situation.
Most of our showrooms are using shared printers (LQ-850, Epson dot matrix) which are shared minimum between two salesmen. Please let me know once the printers are setup with the application, how the print jobs will be completed. ie, whether the application will automatically popup the print dialog box with default printer selected etc.
Thanks and regards,
raj

I fixed this by choosing another printer protocoll by printer setup. HP protocoll fixed it. In the server manager I chose IPP. An everything worked fine after that.
Message was edited by: Christian Kuehn

Similar Messages

  • EBS R12 Report Printing using PASTA

    Hi Friends,
    Can you help me with my printing set-up please. I am priting a standard reports but the
    printing is not centered. It has big margin on the left (like 3 inches ) and the right side columns
    overshooted.
    How do I adjust my printing to move for right to left by scale? or How do i choose paper size?
    Or how do I print macro like a font 6 instead of normal 12?
    Thanks a lot

    Duplicate Post (Check your other thread):
    EBS R12 Report Printing using PASTA
    Re: EBS R12 Report Printing using PASTA

  • EBS R12 open PDF with error by "View Output" button

    In EBS R12,
    We did setup some report output as PDF.
    After run concurrent job of report, click "View Output"
    It prompt a new IE window and prompt error "Internet Explorer cannot display page".
    Problem Client PC information:
    1. Win XP SP3
    IE 8
    Adobe Reader 9 or 8 (Enable Option "Open PDF in Browser")
    2. Win 7
    IE 9
    Adobe Reader 9 (Enable Option "Open PDF in Browser")
    Any related setting can help for this?
    Thanks.

    Hi AsifMuhammad,
    Thanks for your help.
    - Is the issue with all the user (different machines).
    >> Yes, tested on different user and different machines.
    >> If using Acrobat Reader 8 or 9 will have the problem, while uninstall Acrobat Reader 8 or 9, then install Acrobat Reader 10 or 11 the problem fixed (Open pdf via IE is normal)
    >> All are Opening the same "View Output" of the same already run Concurrent Program ID.
    - Is the issue with all the PDF reports.
    >> We do not use other PDF reports. (Forget to mention it is the concurrent program "Format Payment Instruction")
    - Do you still get the error when trying with other browsers such as Firefox.
    >> When using Firefox, it prompt "Download Postscript File" > Click "Open PostScript Document" > Then it still open by Acrobat Reader.
    >> For this point, yes, we has been setup "Output as PostScript" for the concurrent program "Format Payment Instruction"
    - Was the report working fine and did you do any changes recently.
    >> The report is working fine, when using Acrobat Reader 10 or 11.
    >> The problem seems just exist when using Acrobat Reader 8 or 9.
    Of course, you may said possible solution maybe Install Acrobat Reader 10 or 11 for those user.
    But it need furthur testing for our internal programs.
    And I've checked, according Oracle's Document, R12 should support Acrobat Reader 5 or up.
    Which lead me think, there should be missed some setting.
    But I cannot find any related setting on this point.
    Thanks

  • Adding printer in Oracle EBS R12

    Hi,
    I have a cannon lbp3310 printer on network.
    I need to print the reports of Oracle EBS R12 through it.
    How would you help me?
    Quick respond will be appreciated.
    Thanks,

    815575 wrote:
    Hi,
    I have a cannon lbp3310 printer on network.
    I need to print the reports of Oracle EBS R12 through it.
    How would you help me?
    Quick respond will be appreciated.
    Thanks,Please search the forum before posting similar questions.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Printer+AND+Setup&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Printer+AND+Setup+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Hi All,  I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"  I run a test print and its se

    Hi All, 
    I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
    I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
    Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
    every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
    I tried
    - lpd printing = "authentication required"
    - reset printer settings ang re-install printer = "authentication required"
    - replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
    This stuff never happened to Mini1.

    Hi All, 
    I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
    I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
    Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
    every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
    I tried
    - lpd printing = "authentication required"
    - reset printer settings ang re-install printer = "authentication required"
    - replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
    This stuff never happened to Mini1.

  • What is an easy way to setup a shared printer to a Macbook?

    I have aqurired a macbook recently and am trying to setup a shared printer with it. The printer connects on all of my Windows based laptops, but not the Macbook.
    Can any one help me out?

    Try Image Capture.
    Eight amazing Image Capture tricks | Digital Photo | Macworld

  • Oracle EBS R12 - DR setup using Oracle Data Guard

    Hi,
    Our customer has implemented Oracle EBS R12 (12.0.6) on a Two Node RAC on HP-UX env. The application Tier also has Two Nodes(Admin Tier and Web Tier).
    Oracle Clusterware - OCR and Vote Disk are on Raw Devices and the EBS database is on ASM.
    Customer wants to implement a DR solution with Oracle Data Guard with only 2 servers - 1 for the Database Tier and 1 for the Application Tier on the DR Site.
    I would like to know if this could be done by following note: 452056.1? I would also like to know if there are other useful docs.
    Thanks.
    Thiru

    Hi,
    Customer escalated this issue to Oracle and they came up with this reply:
    They can implement Disaster recovery solution from RAC to NON RAC using Solution A which use RMAN utilities for backup and recovery.
    While now AMP Application Management Pack gives the capablitiy to build non RAC from RAC Envioment, In future AMP will be capable also to support cloning of DB with Data Guard.
    Details
    Solution A - Using RMAN:
    For Release 12 customers, you can clone from a RAC to RAC (like to like) or RAC to non-RAC. This is using RMAN scripts to take a copy of the db when it’s in archive mode. if you’re leveraging any disaster recovery tools like data guard, the above solution should work fine…perhaps some fine tuning to the procedures
    Solution B - Using AMP in the future release
    For Release 11i , Release 12.x customers, AMP would be offering a new cloning solution that wouldn’t have dependency on Rapid Clone. This solution leverages the strengths of EM Grid Control in provisioning or cloning targets such as databases. This would be an advance solution that would support:
    o A full-fledged scale down cloning
    o Cloning of EBS deployed on Shared File System
    o Hot and Cold mode cloning
    o Quantifiable reduction in clone time for the entire EBS system
    This solution would be leveraging EM grid Control’s DB provisioning pack’s clone utilities, that are quite advanced and support cloning of DB with Data Guard.
    The recommendation is to start trialing AMP version 3.0, making the purchase and implementing within the Enterprise. As we release the new version of AMP (release 3.0.1), Customer would be in a better position to quickly implement the latest features
    Can anyone let me know if the solution A suggested will work.
    Rgds,
    Thiru

  • Does Lexmark 4227 plus printer is supported for Oracle EBS R12.0.6?

    Hi
    Our sysadmin installed Lexmark 4227 plus printer on AIX 5.3.7, printing perfectly from AIX. But when i register printer in EBS R12.0.6, it is printing Garbage for text type report. Could not find driver definitions for Lexmark type printer. How to define? I am unable to resolve issue. Can anybody help me?
    Regards

    Ateeq,
    Use lp command on Unix/Linux, and on Windows use print command.
    Windows:
    print /D:\\<server_name>\<printer_name> <file_name>
    Unix/Linux:
    lp -d <printer_name> -n<copies> <file_name>Where file_name is the concurrent request output file.
    Note: 784640.1 - Any EBS Requirements For Local or Remote Printers
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=784640.1
    I believe Oracle Apps does not come with seeded drivers/styles for Lexmark printers, so you may need to try with different predefined styles/drivers. Also, contact your vendor and see if they have any clients with this printer configured on Oracle Apps.
    Regards,
    Hussein

  • Steps to define new printer in EBS R12

    Dear all,
    I have hp 3005n printer installed in AIX5.3,
    I need to define it on EBS R12. can any one provide me with step by step to do that ??
    Regards,
    Marwan

    Hi,
    You can also have a look at the following metalink note
    eventhough below note is for Release 11 and Release 11i, but concept is same
    Step By Step Guide to Set Up a Printer in Oracle Applications
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=60936.1

  • Convert dedicated server to shared server on database tier Ebs R12

    Hi all,
    have anyone done this before, converting dedicated server to shared_server in R12
    12.0.6 database 10.2.0.4 on OUL5
    i've done this in single database but not with Ebs R12.
    Please point me to some docs regarding this issue.
    Thanks in advance!

    Thx for the Post now I am running into diffrent problem
    look at my TNSNAMES.ora
    GDAT1.ILABSGROUP.COM =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.213.27)(PORT = 1521))
    (CONNECT_DATA =
    #(SERVER = SHARED)
    (SERVICE_NAME =GDAT1)
    if i uncomment ( Add the line) SERVER = SHARED i get a
    ORA-12523: TNS:listener could not find instance appropriate for the client
    connection
    Please assit

  • Reverse proxy setup for EBS R12.1.1

    We have an external DMZ server configured for oracle ebs r12.1.1. The URL is http://testerp.mydomain.com:8003.
    Can you please provide a link that shows step by step setup of Reverse proxy for the above URL to access the application.
    I already have the metalink notes that says about DMZ setup for oracle ebs. I actually am looking for step by step setup for the reverse proxy using oracle application server 10g. Please help. Thanks.

    Roy, I have already gone through that document, it is actually showing how to install and configure webcache 10g for oracle ebs r12.
    It also says the features that oracle applicaiton server web cache provides like,
    •Load Balance
    •Reverse Proxy
    •Failover and Surge Protection to minimize downtime
    •Personalize Attributes for Caching
    BUT IT IS NOT MENTIONING HOW TO CONFIGURE THE 'REVERSE PROXY' FOR THE ORACLE EBS EXTERNAL APPLICATION SERVER ON DMZ.

  • Installing EBS R12 on Windows Vista Basic

    I am trying to install EBS R12 media pack on my computer having Windows Vista Basic.
    I could have the installation pass 2 steps out of 5.
    But while performing the third step, it is failing with the following error:
    Log file located at F:\oracle\VIS\inst\apps\VIS_srinivas-pc\admin\log\ApplyAppsTechStack_08200335.log
    | 0% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
    RC-50013: Fatal: Failed to instantiate driver F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    Does anybody know what could be the cause of the error?
    THe log files are pasted below:
    ApplyAppsTechStack_08200335.log
    Started ApplyAppsTechStack at Wed Aug 20 03:35:20 GMT 2008
    Version:
         ApplyAppsTechStack.java     :      120.23
    Executing home registration for s_weboh_oh...
    Registering using Registration Driver
    F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    instantiate file:
    source : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to F:\oracle\VIS\inst\apps\VIS_srinivas-pc\out\ouicli.pl
    setting permissions: 700
    instantiate file:
    source : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to F:\oracle\VIS\inst\apps\VIS_srinivas-pc\out\txkstubcfg1013.pl
    setting permissions: 700
    instantiate file:
    source : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : F:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : F:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to F:\oracle\VIS\inst\apps\VIS_srinivas-pc\out\apachectl
    setting permissions: 700
    Executing script in InstantiateFile:
    F:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I F:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I F:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    script returned:
    Beginning OUI CLI cloning for s_weboh_ohTue Aug 19 23:35:23 2008
    F:\oracle\VIS\apps\tech_st\10.1.3\jdk\bin\java -classpath F:\StageR12\startCD\Disk1\rapidwiz\jlib\java;F:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml -nolink -oaVar s_weboh_oh -homestub weboh -log F:\oracle\VIS\inst\apps\VIS_srinivas-pc\admin\log\ohclone.log
    running OUI CLI home cloning:
    F:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=F:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_srinivas-pc_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_srinivas-pc_WEBOH -J-Doracle.installer.noLink=true
    Finished OUI CLI cloning for s_weboh_oh with return code: 0Tue Aug 19 23:35:28 2008
    [SC] OpenService FAILED 1060:
    The specified service does not exist as an installed service.
    .end std out.
    .end err out.
    Executing script in InstantiateFile:
    F:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I F:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I F:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    script returned:
    .end std out.
    .end err out.
    instantiate file:
    source : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to F:\oracle\VIS\inst\apps\VIS_srinivas-pc\out\ouicli0.pl
    setting permissions: 700
    instantiate file:
    source : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to F:\oracle\VIS\inst\apps\VIS_srinivas-pc\out\txkstubcfg10130.pl
    setting permissions: 700
    instantiate file:
    source : F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : F:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : F:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to F:\oracle\VIS\inst\apps\VIS_srinivas-pc\out\apachectl0
    setting permissions: 700
    F:\oracle\VIS\inst\apps\VIS_srinivas-pc\admin\log\adcvmlog.xml does not exist. Ignore it
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [APPLY PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: F:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I F:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I F:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I F:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
    ouicli.pl INSTE8_APPLY 36
    AutoConfig is exiting with status 1
    RC-50013: Fatal: Instantiate driver did not complete successfully.
    F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    ======================================================
    Another Log File
    Log File: 08200031.log
    Processing DriverFile = F:\StageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    Running Instantiation Drivers for F:\StageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    instantiate file:
    source : F:\StageR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd
    backup : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd to F:\oracle\VIS\apps\apps_st\appl\admin\VIS_srinivas-pc\out\templbac\adrunias.cmd
    instantiate file:
    source : F:\StageR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunat.cmd
    backup : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunat.cmd to F:\oracle\VIS\apps\apps_st\appl\admin\VIS_srinivas-pc\out\templbac\adrunat.cmd
    Step 0 of 5
    Command: F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd
    Processing Step 3 of 5
    Executing: F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd
    F:\StageR12\startCD\Disk1\rapidwiz>REM
    F:\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.7 2007/06/13 14:34:57 hcwolf noship $
    F:\StageR12\startCD\Disk1\rapidwiz>REM ###############################################################
    F:\StageR12\startCD\Disk1\rapidwiz>REM
    F:\StageR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
    F:\StageR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
    F:\StageR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
    F:\StageR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
    F:\StageR12\startCD\Disk1\rapidwiz>REM
    F:\StageR12\startCD\Disk1\rapidwiz>REM ###############################################################
    F:\StageR12\startCD\Disk1\rapidwiz>REM
    F:\StageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    F:\StageR12\startCD\Disk1\rapidwiz>(set date=Tue 08/19/2008 )
    F:\StageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    F:\StageR12\startCD\Disk1\rapidwiz>(set time=11:07 PM )
    F:\StageR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Tue 08/19/2008 11:07 PM
    STARTED INSTALL PHASE : APPS TECH STACK : Tue 08/19/2008 11:07 PM
    F:\StageR12\startCD\Disk1\rapidwiz>SET JRE_PATH=F:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java
    F:\StageR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;F:\StageR12\startCD\Disk1\rapidwiz\jlib\java;F:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
    F:\StageR12\startCD\Disk1\rapidwiz>SET XML_FILE=F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    F:\StageR12\startCD\Disk1\rapidwiz>SET PATH=F:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\site\bin;C:\Perl\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;f:\cygwin\cygwininstal\bin\
    F:\StageR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    F:\StageR12\startCD\Disk1\rapidwiz>setlocal enableextensions
    F:\StageR12\startCD\Disk1\rapidwiz>set /P unpw=""
    F:\StageR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPS_UNAME=%i && set APPS_PWD=%j
    F:\StageR12\startCD\Disk1\rapidwiz>set APPS_UNAME=APPS && set APPS_PWD=APPS
    F:\StageR12\startCD\Disk1\rapidwiz>SET APPSUSER=APPS
    F:\StageR12\startCD\Disk1\rapidwiz>SET APPSPASS=APPS
    F:\StageR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=2 )
    F:\StageR12\startCD\Disk1\rapidwiz>CD /D C:\Users\Srinivas\AppData\Local\Temp
    C:\Users\Srinivas\AppData\Local\Temp>if "FALSE" == "F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd" (if not "FALSE" == "FALSE" (goto :FALSE ) else (goto :runProcess_1 ) )
    C:\Users\Srinivas\AppData\Local\Temp>echo "runProcess_1"
    "runProcess_1"
    C:\Users\Srinivas\AppData\Local\Temp>REM
    C:\Users\Srinivas\AppData\Local\Temp>REM Perform the install for tech stack
    C:\Users\Srinivas\AppData\Local\Temp>REM
    C:\Users\Srinivas\AppData\Local\Temp>echo Statusstring Installing Applications Technology Stack
    Statusstring Installing Applications Technology Stack
    C:\Users\Srinivas\AppData\Local\Temp>F:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -mx600M -classpath .;F:\StageR12\startCD\Disk1\rapidwiz\jlib\java;F:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml -d F:\StageR12\startCD\Disk1\rapidwiz\driver\appsts\driver\gias.drv -pwd no_password_here -log F:\oracle\VIS\apps\apps_st\appl\admin\VIS_srinivas-pc\log\ApplyAppsTechStack.log -nthreads 2 -verbose
    Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
    Checking Disk contents in - F:\StageR12\startCD\Disk1\rapidwiz
    Checking Disk contents in - F:\StageR12\oraAS\Disk1
    Checking Disk contents in - F:\StageR12\oraAS\Disk1
    Unzip Count:43
    Processing Disk1....
    Processing Disk2....
    C:\Users\Srinivas\AppData\Local\Temp>if 0 == 0 goto :BITS_OK
    C:\Users\Srinivas\AppData\Local\Temp>echo "runProcess_2"
    "runProcess_2"
    C:\Users\Srinivas\AppData\Local\Temp>REM Perform the registration for tech stack
    C:\Users\Srinivas\AppData\Local\Temp>REM
    C:\Users\Srinivas\AppData\Local\Temp>REM Bugfix: 5872965/5978329
    C:\Users\Srinivas\AppData\Local\Temp>COPY F:\StageR12\startCD\Disk1\rapidwiz\etc\adouitools.pl F:\oracle\VIS\apps\tech_st\10.1.2\appsutil\template\adouitools.pl
    1 file(s) copied.
    C:\Users\Srinivas\AppData\Local\Temp>COPY F:\StageR12\startCD\Disk1\rapidwiz\etc\adouiweboh.pl F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    1 file(s) copied.
    C:\Users\Srinivas\AppData\Local\Temp>REM End Bugfix: 587296/5978329
    C:\Users\Srinivas\AppData\Local\Temp>echo Statusstring Registering Applications Technology Stack
    Statusstring Registering Applications Technology Stack
    C:\Users\Srinivas\AppData\Local\Temp>(echo APPS & echo APPS ) | F:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -mx512M -classpath .;F:\StageR12\startCD\Disk1\rapidwiz\jlib\java;F:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml -stage F:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at F:\oracle\VIS\inst\apps\VIS_srinivas-pc\admin\log\ApplyAppsTechStack_08200335.log
    | 0% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
    RC-50013: Fatal: Failed to instantiate driver F:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    C:\Users\Srinivas\AppData\Local\Temp>if 1 == 0 goto :REG_OK
    C:\Users\Srinivas\AppData\Local\Temp>echo Cannot execute registration of Applications Techstack
    Cannot execute registration of Applications Techstack
    C:\Users\Srinivas\AppData\Local\Temp>if "" == "TRUE" goto :INSIAS_OK
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    Please refer to the remaining logs on applications node at - F:\oracle\VIS\inst\apps\VIS_srinivas-pc\logs\08200031.log
    Processing DriverFile = F:\StageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    Running Instantiation Drivers for F:\StageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    instantiate file:
    source : F:\StageR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd
    backup : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd to F:\oracle\VIS\apps\apps_st\appl\admin\VIS_srinivas-pc\out\templbac\adrunias.cmd
    instantiate file:
    source : F:\StageR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunat.cmd
    backup : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunat.cmd to F:\oracle\VIS\apps\apps_st\appl\admin\VIS_srinivas-pc\out\templbac\adrunat.cmd
    Step 0 of 5
    Command: F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd
    Processing Step 3 of 5
    Executing: F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd
    F:\StageR12\startCD\Disk1\rapidwiz>REM
    F:\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.7 2007/06/13 14:34:57 hcwolf noship $
    F:\StageR12\startCD\Disk1\rapidwiz>REM ###############################################################
    F:\StageR12\startCD\Disk1\rapidwiz>REM
    F:\StageR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
    F:\StageR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
    F:\StageR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
    F:\StageR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
    F:\StageR12\startCD\Disk1\rapidwiz>REM
    F:\StageR12\startCD\Disk1\rapidwiz>REM ###############################################################
    F:\StageR12\startCD\Disk1\rapidwiz>REM
    F:\StageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    F:\StageR12\startCD\Disk1\rapidwiz>(set date=Tue 08/19/2008 )
    F:\StageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    F:\StageR12\startCD\Disk1\rapidwiz>(set time=11:53 PM )
    F:\StageR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Tue 08/19/2008 11:53 PM
    STARTED INSTALL PHASE : APPS TECH STACK : Tue 08/19/2008 11:53 PM
    F:\StageR12\startCD\Disk1\rapidwiz>SET JRE_PATH=F:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java
    F:\StageR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;F:\StageR12\startCD\Disk1\rapidwiz\jlib\java;F:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;F:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
    F:\StageR12\startCD\Disk1\rapidwiz>SET XML_FILE=F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    F:\StageR12\startCD\Disk1\rapidwiz>SET PATH=F:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\site\bin;C:\Perl\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;f:\cygwin\cygwininstal\bin\
    F:\StageR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    F:\StageR12\startCD\Disk1\rapidwiz>setlocal enableextensions
    F:\StageR12\startCD\Disk1\rapidwiz>set /P unpw=""
    F:\StageR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPS_UNAME=%i && set APPS_PWD=%j
    F:\StageR12\startCD\Disk1\rapidwiz>set APPS_UNAME=APPS && set APPS_PWD=APPS
    F:\StageR12\startCD\Disk1\rapidwiz>SET APPSUSER=APPS
    F:\StageR12\startCD\Disk1\rapidwiz>SET APPSPASS=APPS
    F:\StageR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=2 )
    F:\StageR12\startCD\Disk1\rapidwiz>CD /D C:\Users\Srinivas\AppData\Local\Temp
    C:\Users\Srinivas\AppData\Local\Temp>if "F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd" == "F:\oracle\VIS\inst\apps\VIS_srinivas-pc\temp\adrunias.cmd" (if not ""runProcess_2"" == "FALSE" (goto :"runProcess_2" ) else (goto :runProcess_1 ) )
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    instantiate file:
    source : F:\StageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    dest : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    dest : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\StageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\StageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    dest : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    dest : F:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\StageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    instantiate file:
    source : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    dest : F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\admin\VIS_srinivas-pc.xml
    Database Availability
    command: cmd.exe /c F:\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd F:\oracle\VIS\db\tech_st\10.2.0\VIS_srinivas-pc.cmd sqlplus F:\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    F:\StageR12\startCD\Disk1\rapidwiz>echo off
    Tue 08/19/2008
    11:54 PM
    ECHO is off.
    ECHO is off.
    Tue 08/19/2008 11:54 PM
    VIS_srinivas-pc.cmd exiting with status 0
    "The environment settings are as follows ..."
    " ORACLE_HOME : F:\oracle\VIS\db\tech_st\10.2.0"
    " ORACLE_SID : "
    " TWO_TASK : "
    " PATH : F:\oracle\VIS\db\tech_st\10.2.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;F:\oracle\VIS\db\tech_st\10.2.0\bin;F:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;F:\oracle\VIS\db\tech_st\10.2.0\appsutil\jre\bin;C:\Perl\site\bin;C:\Perl\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;f:\cygwin\cygwininstal\bin\"
    " LD_LIBRARY_PATH : F:\oracle\VIS\db\tech_st\10.2.0\lib"
    SQL*Plus: Release 10.2.0.3.0 - Production on Tue Aug 19 23:54:28 2008
    Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
    Connected.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    connect test returning code 0
    ERRORCODE = 0 ERRORCODE_END
    Database ORACLE_HOME connection test has succeeded
    command: cmd.exe /c F:\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd F:\oracle\VIS\inst\apps\VIS_srinivas-pc\ora\10.1.2\VIS_srinivas-pc.cmd sqlplus F:\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
    F:\StageR12\startCD\Disk1\rapidwiz>echo off
    Tue 08/19/2008
    11:54 PM
    "Cannot find environment file "F:\oracle\VIS\inst\apps\VIS_srinivas-pc\ora\10.1.2\VIS_srinivas-pc.cmd""
    ERRORCODE = 0 ERRORCODE_END
    Apps ORACLE_HOME connection test has succeeded
    Configuration Upload
    uploading config file at C:\Users\Srinivas\AppData\Local\Temp\08200031\conf_VIS.txt
    AppsConfig : 'config.txt' uploading...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : srinivas-pc
    sDbDomain : nathani.com
    sDbPort : 1524
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@srinivas-pc.nathani.com:1524:VIS
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Successful upload of config file at C:\Users\Srinivas\AppData\Local\Temp\08200031\conf_VIS.txt
    Environment File
    Database ORACLE_HOME environment file passes instantiated variables test:
    File = F:\oracle\VIS\db\tech_st\10.2.0\VIS_srinivas-pc.env
    RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
    File = F:\oracle\VIS\inst\apps\VIS_srinivas-pc\ora\10.1.3\VIS_srinivas-pc.cmd
    RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
    File = F:\oracle\VIS\inst\apps\VIS_srinivas-pc\ora\10.1.2\VIS_srinivas-pc.cmd
    RW-50016: Error: - APPL_TOP environment file was not created:
    File = F:\oracle\VIS\apps\apps_st\appl\VIS_srinivas-pc.cmd
    RW-50016: Error: - ADOVARS environment file was not created:
    File = F:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
    RW-50016: Error: - APPSCONFIG was not created:
    File = F:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
    DBC File
    RW-00023: Error: - DBC file was not created:
    File = F:\oracle\VIS\inst\apps\VIS_srinivas-pc\appl\fnd\12.0.0\secure\VIS.dbc
    HTTP
    checking URL = http://srinivas-pc.nathani.com:8003
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://srinivas-pc.nathani.com:8003/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://srinivas-pc.nathani.com:8003/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

    Client Certifications
    OS Product Server Status Addtl. Info. Components Other Issues
    Vista SP1 12.0 N/A Certified None None Yes None
    Vista 12.0 N/A Certified None None Yes NoneIt is certified as a Client (Desktop) only. Means, you can access Oracle Apps 11i/R12 from a machine running Windows Vista, but it is not certified as Application/Database tiers.
    And also the below link from blogs.oracle.com says that R12 is certified with vista.
    http://blogs.oracle.com/stevenChan/2008/07/windows_vista_service_pack_1_certified_with_apps_1.html
    Release 12
    - Oracle Applications Release 12 with R12.ATG_PF.A.DELTA.3 (patch 6077669) or later
    - Microsoft Vista Service Pack 1 (SP1) desktop clients running Internet Explorer 7
    - Sun Java plug-in (JRE) 1.5.0_12 or later

  • Oracle EBS R12 Pre - Implementations phase question air

    Oracle EBS R12 Pre - Implementations phase question air
    Posted: Jun 30, 2009 10:22 AM Edit Reply
    Dear all Gurus,
    We are going to implement Oracle EBS r12, for industrial concern, we have following quires if any peer may suggest.
    1) we heard the oracle R12 has build new release with 11g db , is it been practical for choosing it for corporate ???
    2) Linux Read hat which version is more stable like 5 releases is compatible with R12 new release?
    3) We are also thinking for 64 bit architecture rather than 32 bit, could any one figure out the practical pros and cons for this.
    4) We are also wondering about the server machine brand and its configurations like HP DL380 G6, DELL 2850? could any one share abut his experience about the same.
    5) What sort of Server configurations (Processor , 2way -4way , RAM , HD and other accessories ) for r12 Multi node setup for 150 clients (DB Server , Apps Server , Test Prod )
    6) What should be backup strategies like tap backup and how much space requirements we must have provisioned for retaining almost 2~3 month backup.
    7) Application implementations methodologies?
    8)
    I know to address our queries would be time consuming for you bust peoples , but I would really oblige for being shared your journey this would defiantly the PATH way for other like mentoring for others.
    looking forward your valuable instructions ASAP.
    Thanks & Best Regards
    Muhammad Waseem
    Manager IT
    Neee-Has Textiles Divisions
    31-Q Gulberg II Lahore
    Pakistan
    92-0333-4240949

    Duplicate post.
    Oracle EBS R12 Pre - Implementations phase question air
    Oracle EBS R12 Pre - Implementations phase question air

  • Converting EBS R12 database to RAC 11gR2

    We are on EBS R12 with 11gR2 database. I read the document 823587.1 with emphasis on Section 3. We are planning to convert the existing EBS database to a 2-node RAC on new servers.
    1. Install 11gR2 Grid Infrastructure on new servers.
    2. Install 11gR2 database software on the 2 nodes with local disk.
    3. Configure listener.
    4. Implement and run Autoconfig on the 2 nodes.
    5. Start Application processes.
    I am not clear about how the data is migrated to the new servers with shared disk using ASM. How is this part done? Mind you, we are moving from a single node server to two brand new servers. I understand that part of using rconfig to convert from single node database to 2 node RAC. But we are not planning to use the existing database server as part of new RAC environment. Thanks.

    It sounds like you are trying to build out new boxes.
    The Shared Storage will have to be setup first with the datafiles/control files, then you could clone the database to the new servers. with RMAN or some other method.
    Your Sysadmin (Unix) should be able to help setting up the shared storage. then on the clone based on how you do it. The Datafiles can be mapped to the new storage area and/or ASM. The Tasks are slightly different.

  • Remote Installation on Linux - EBS R12

    Hi,
    Is it possible to install EBS R12 remotely on linux? since I tried to start rapidwiz after installing all the prerequisites, but I didn't get rapidwiz screen instead I got a message saying that
    Rapid Install Wizard is validating your file system......
    >> Wizard requires the DISPLAY variable to be set.
    >> Please set your DISPLAY variable and restart Rapid Install Wizard.
    If I try to start, I am getting fatal error and saying X server is already running in the backend. I have also created the Stage Area properly in the same HDD itself.
    Please lemme know the steps to run rapidwiz remotely
    Thanks,
    Anand

    Hi,
    Thanks for the information.
    I used Xmanager and almost completed the installation from my laptop itself, but ended with few errors in Post install checks as given below
    Erros On
    HTTP ->
    checking URL = http://oracleapps.erpsrv.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    Help Page
    checking URL = http://oracleapps.erpsrv.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://oracleapps.erpsrv.com:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    others are fine.
    I tried running atoconfig but that too gave some errors and I have pasted the log file content below.
    ===========================================================
    ORACLE_HOME : /oradata/AppsR12/VIS/apps/tech_st/10.1.2
    TWO_TASK : VIS
    PATH : /oradata/AppsR12/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/oradata/AppsR12/VIS/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:$PATH:/oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/applmgr/bin
    TNS_ADMIN : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/ora/10.1.2/network/admin
    LD_LIBRARY_PATH : /oradata/AppsR12/VIS/apps/tech_st/10.1.2/lib32:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads
    SQLPLUS Executable : /oradata/AppsR12/VIS/apps/tech_st/10.1.2/bin/sqlplus
    Error encountered while running /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/cseadmprf.sql
    ERRORCODE = 32512 ERRORCODE_END
    .end std out.
    sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
    .end err out.
    Processing DriverFile = /oradata/AppsR12/VIS/apps/apps_st/appl/eam/12.0.0/admin/driver/eamtmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for EAM_TOP
    instantiate file:
    source : /oradata/AppsR12/VIS/apps/apps_st/appl/eam/12.0.0/admin/template/eamadmprf.sql
    dest : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/eamadmprf.sql
    backup : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/eamadmprf.sql to /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/out/11061324/eamadmprf.sql
    setting permissions: 600
    setting ownership: applmgr:dba
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for EAM_TOP
    Executing script in InstantiateFile:
    /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/bin/perl -I /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /oradata/AppsR12/VIS/apps/apps_st/appl/au/12.0.0/perl /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/scripts/adexecsql.pl sqlfile=/oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/eamadmprf.sql
    script returned:
    adexecsql.pl started at Tue, 11 Nov 2007 13:26:32 -0500
    The environment settings are as follows ...
    ORACLE_HOME : /oradata/AppsR12/VIS/apps/tech_st/10.1.2
    TWO_TASK : VIS
    PATH : /oradata/AppsR12/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/oradata/AppsR12/VIS/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:$PATH:/oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/applmgr/bin
    TNS_ADMIN : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/ora/10.1.2/network/admin
    LD_LIBRARY_PATH : /oradata/AppsR12/VIS/apps/tech_st/10.1.2/lib32:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads
    SQLPLUS Executable : /oradata/AppsR12/VIS/apps/tech_st/10.1.2/bin/sqlplus
    Error encountered while running /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/eamadmprf.sql
    ERRORCODE = 32512 ERRORCODE_END
    .end std out.
    sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
    .end err out.
    Processing DriverFile = /oradata/AppsR12/VIS/apps/apps_st/appl/fte/12.0.0/admin/driver/ftetmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for FTE_TOP
    instantiate file:
    source : /oradata/AppsR12/VIS/apps/apps_st/appl/fte/12.0.0/admin/template/fteadmprf.sql
    dest : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/fteadmprf.sql
    backup : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/fteadmprf.sql to /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/out/11061324/fteadmprf.sql
    setting permissions: 600
    setting ownership: applmgr:dba
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for FTE_TOP
    Executing script in InstantiateFile:
    /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/bin/perl -I /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /oradata/AppsR12/VIS/apps/apps_st/appl/au/12.0.0/perl /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/scripts/adexecsql.pl sqlfile=/oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/fteadmprf.sql
    script returned:
    adexecsql.pl started at Tue, 11 Nov 2007 13:26:33 -0500
    The environment settings are as follows ...
    ORACLE_HOME : /oradata/AppsR12/VIS/apps/tech_st/10.1.2
    TWO_TASK : VIS
    PATH : /oradata/AppsR12/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/oradata/AppsR12/VIS/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:$PATH:/oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/applmgr/bin
    TNS_ADMIN : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/ora/10.1.2/network/admin
    LD_LIBRARY_PATH : /oradata/AppsR12/VIS/apps/tech_st/10.1.2/lib32:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/oradata/AppsR12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads
    SQLPLUS Executable : /oradata/AppsR12/VIS/apps/tech_st/10.1.2/bin/sqlplus
    Error encountered while running /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/fteadmprf.sql
    ERRORCODE = 32512 ERRORCODE_END
    .end std out.
    sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
    .end err out.
    Processing DriverFile = /oradata/AppsR12/VIS/apps/apps_st/appl/ont/12.0.0/admin/driver/onttmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for ONT_TOP
    Processing DriverFile = /oradata/AppsR12/VIS/apps/apps_st/appl/ar/12.0.0/admin/driver/artmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for AR_TOP
    Processing DriverFile = /oradata/AppsR12/VIS/apps/apps_st/appl/ahl/12.0.0/admin/driver/ahltmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for AHL_TOP
    Processing DriverFile = /oradata/AppsR12/VIS/apps/apps_st/appl/ozf/12.0.0/admin/driver/ozftmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for OZF_TOP
    Processing DriverFile = /oradata/AppsR12/VIS/apps/apps_st/appl/ies/12.0.0/admin/driver/iestmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for IES_TOP
    instantiate file:
    source : /oradata/AppsR12/VIS/apps/apps_st/appl/ies/12.0.0/admin/template/cooper.sh
    dest : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/cooper.sh
    backup : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install/cooper.sh to /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/out/11061324/cooper.sh
    setting permissions: 755
    setting ownership: applmgr:dba
    Processing DriverFile = /oradata/AppsR12/VIS/apps/apps_st/appl/csd/12.0.0/admin/driver/csdtmpl.drv
    AutoConfig Profile Phase
    Running Instantiation Drivers for CSD_TOP
    Product Top Drivers executed : AD_TOP FND_TOP ICX_TOP IEO_TOP BIS_TOP AMS_TOP CCT_TOP WSH_TOP CLN_TOP OKE_TOP OKL_TOP OKS_TOP CSF_TOP IGS_TOP IBY_TOP JTF_TOP MWA_TOP CN_TOP CSI_TOP WIP_TOP CSE_TOP EAM_TOP FTE_TOP ONT_TOP AR_TOP AHL_TOP OZF_TOP IES_TOP CSD_TOP
    ===========================================================================
    Starting Restore Profile utility at Tue Nov 06 13:26:34 EST 2007
    Using version 120.2
    ADX Database Utility
    getConnection() -->
    sDbHost : oracleapps
    sDbDomain : erpsrv.com
    sDbPort : 1521
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@oracleapps.erpsrv.com:1521:VIS
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Verifying connection to the Database : Established
    Restore Profile Feature : Enabled
    Restore Profile file created at : /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/out/11061324/restore.sql
    Purging the table ADX_PRE_AUTOCONFIG of rows containing attribute VIS_oracleapps
    Purging completed
    Restore Profile utility ran successfully
    ===========================================================================
    adcvmlog.xml renamed to /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/log/11061323/adcvmlog.xml.11061326
    [CVM Error Report]
    The following report lists errors encountered during CVM Phase
    <filename> <return code where appropriate>
    /oradata/AppsR12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adgentns.pl 512
    No of scripts failed in CVM phase: 1
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [SETUP PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install
    adgendbc.sh INSTE8_SETUP 1
    adgenjky.sh INSTE8_SETUP 1
    afcpnode.sh INSTE8_SETUP 127
    afgcsreg.sh INSTE8_SETUP 127
    txkWfClone.sh INSTE8_SETUP 127
    [PROFILE PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/bin/perl -I /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /oradata/AppsR12/VIS/apps/apps_st/appl/au/12.0.0/perl /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/scripts/adexecsql.pl sqlfile=/oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install
    amscmprf.sql INSTE8_PRF 32512
    amswebprf.sql INSTE8_PRF 32512
    bisadmprf.sql INSTE8_PRF 32512
    bisdblrp.sql INSTE8_PRF 32512
    clnadmprf.sql INSTE8_PRF 32512
    cnadmprf.sql INSTE8_PRF 32512
    cncmprf.sql INSTE8_PRF 32512
    cseadmprf.sql INSTE8_PRF 32512
    csfadmprf.sql INSTE8_PRF 32512
    csiadmprf.sql INSTE8_PRF 32512
    eamadmprf.sql INSTE8_PRF 32512
    fteadmprf.sql INSTE8_PRF 32512
    ibywebprf.sql INSTE8_PRF 32512
    icxwebprf.sql INSTE8_PRF 32512
    oksfrmprf.sql INSTE8_PRF 32512
    wshadmprf.sql INSTE8_PRF 32512
    Directory: /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install
    adadmprf.sh INSTE8_PRF 127
    afadmprf.sh INSTE8_PRF 127
    afcpctx.sh INSTE8_PRF 127
    afcpgsm.sh INSTE8_PRF 127
    afwebprf.sh INSTE8_PRF 127
    jtfictx.sh INSTE8_PRF 127
    mwamscasvc.sh INSTE8_PRF 127
    okladmprf.sh INSTE8_PRF 127
    txkJavaMailerCfg.sh INSTE8_PRF 127
    txkWebServicescfg.sh INSTE8_PRF 127
    [APPLY PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/bin/perl -I /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /oradata/AppsR12/VIS/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /oradata/AppsR12/VIS/apps/apps_st/appl/au/12.0.0/perl /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/install
    adadmat.pl INSTE8_APPLY 141
    AutoConfig is exiting with status 32
    The log file for this session is located at: /oradata/AppsR12/VIS/inst/apps/VIS_oracleapps/admin/log/11061323/adconfig.log
    You have new mail in /var/spool/mail/applmgr
    ===========================================================
    Please guide me to solve this issue.
    Regards
    Anand

Maybe you are looking for