EBS - URGENT
< MODERATOR: Per the forum [rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement], please use an appropriate subject in your message. Message locked. >
Hello SAP GURU,
I am facing one problem while executing FF_5
I posted a customer invoice through FB70.
I received the pay. and posted it through JV FB50.
I deposited all cheques received in a day through single pay in slip.
Bank gives me credit for all cheques deposited on a day per pay in slip wise not check no. wise.Actuall, when i posted JV to book receipt I booked it through check no. wise but in bank statement bank gives me credit through pay in slip wise.
So, I am not able to clear the transaction.
Guru, tell me how to fix this Guru -
its ver urgent.
Thanks a lot
Raj
Hi Raj,
We had a similar situation, but there is nothing much to do. At the moment you can execute FF.5 as a batch and manually clear the indvidual cheques during SM35. Then you can request the bank to give a break-up of cheques in the file. This is what we did.
Rgds
Nadini
Similar Messages
-
OIM with EBS HR for recon and UM for provisioning - urgent
Hi All
I am trying to setup OIM with EBS HR mod as the trusted source and EBS User mod for user provisioning. I am using the OOB EBS connector version 90430 with OIM 9.1.0.1. I have configured the reconcialiation and provisioning as per the oracle documentation. But only few of the parameters are reconciled into the OIM->USR table. When I go to Reconciliation Manager, I can see only few data fields in the processed data region and rest are in the unprocessed data region. The recon engine is able to pick up the corresponding values from the HR system but is not able to process the same.
Please let me know where can be the problem reside.
Also when I provision a record into Oracle EBS User mod, even if I give all the required data in the direct provisioning form, an account is created in the EBS system with partial data e.g. email is not getting provisioned.
Please help me in setting up recon and provisioning in OIM - EBS.
This is really urgent.. please help !!!
ThanksThe standard suggestion for that is:
- What's the reeson for using EBIZ connector version *9043*. That's an older version and may be these things which you are referring to could not be part of that connector.
- Use the ORCL_EBS_UM_91000 and ORCL_EBS_ER_91000. You can download it from OTN. This should resolve the outstanding issues for you.
Thanks
Sunny -
[URGENT] Get Inbound Message in EBS Using XML Gateway + SOAP
Hi experts,
I want to ask you about how to process the inbound message using XML Gateway and SOAP protocol.
I have 2 EBS instances, let's called it A (source) and B (destination).
FYI, I'm following this ebook: "Oracle E-Business Suite Development and Extensibility Handbook" in chapter 12 regarding Oracle XML Gateway.
So I don't use BPEL PM to do this.
I'm just using EBS with XML Gateway and Integrated SOA Gateway responsibilities.
When I tried to send the XML from A to B using OXTA, it's success, the data can be processed in B and could store in the database.
But when I tried to use SOAP, the XML message that has been sent from A is success, and when I check it on B (Integrated SOA Gateway -> SOA Monitor), the message is in there and I can see the SOAP request and response as well.
SOAP request:
<?xml version="1.0" encoding="UTF-8" ?>
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://xmlns.oracle.com/apps/fnd/XMLGateway" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
- <env:Header>
- <ns0:XMLGateway_Header>
<ns0:MESSAGE_TYPE>XML</ns0:MESSAGE_TYPE>
<ns0:MESSAGE_STANDARD>OAG</ns0:MESSAGE_STANDARD>
<ns0:TRANSACTION_TYPE>XKLB</ns0:TRANSACTION_TYPE>
<ns0:TRANSACTION_SUBTYPE>ORDER_DETAILS_XO</ns0:TRANSACTION_SUBTYPE>
<ns0:DOCUMENT_NUMBER>9282</ns0:DOCUMENT_NUMBER>
<ns0:PARTY_SITE_ID>142</ns0:PARTY_SITE_ID>
<ns0:USERNAME>cons.ade</ns0:USERNAME>
<ns0:PASSWORD>cons.ade</ns0:PASSWORD>
</ns0:XMLGateway_Header>
</env:Header>
- <env:Body>
<ns0:ReceiveDocument xsi:type="xsd:string"><ORDER_DETAILS_XO xmlns=""> <ORDER> <ORDNO>100002</ORDNO> <ORDWT>100002</ORDWT> <RDATE/> <CITY>JAKARTA</CITY> <ZIP>17121</ZIP> </ORDER> </ORDER_DETAILS_XO></ns0:ReceiveDocument>
</env:Body>
</env:Envelope>
SOAP response:
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header />
- <env:Body>
- <ReceiveDocument_Response xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">
<ResponseCode xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">200</ResponseCode>
<ResponseMsgId xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">BD4EAD91E76051D5E0440021287448DA</ResponseMsgId>
<ResponseInfo xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">Document received and pushed into queue for asynchronous processing. Enqueued message id is 'BD4EAD91E76051D5E0440021287448DA'.</ResponseInfo>
</ReceiveDocument_Response>
</env:Body>
</env:Envelope>
But the problem is the message that has been got in B can't store into the database yet.
I had already changed the Queue in the XML Gateway -> Define Transaction, from APPLSYS.ECX_IN_OAG_Q (this is for OXTA) to APPLSYS.WF_WS_JMS_IN.
After I invoke the webservice and the SOAP message has been got in B, I checked APPLSYS.WF_WS_JMS_IN in database and there is 1 record, the value of USER_DATA column is:
((, , , , , , ((BES_EVENT_NAME, 100, oracle.apps.fnd.wf.ws.inbound.xmltx.receive, , 27), (BES_EVENT_KEY, 100, 796550960, , 27), (BES_PRIORITY, 200, , 1, 23), (BES_FROM_AGENT, 100, [email protected], , 27), (BES_TO_AGENT, 100, [email protected], , 27), (MSG_ID, 100, 1334117503435, , 27), (ECX_MESSAGE_TYPE, 100, XML, , 27), (ECX_MESSAGE_STANDARD, 100, OAG, , 27), (ECX_PARTY_SITE_ID, 100, 142, , 27), (WS_PORT_OPERATION, 100, ReceiveDocument, , 27), (ECX_TRIGGER_ID, 100, 7101, , 27), (UserId, 100, 3020, , 27), (ECX_USERNAME, 100, CONS.ADE, , 27), (ECX_TRANSACTION_SUBTYPE, 100, ORDER_DETAILS_XO, , 27), (ECX_PASSWORD, 100, CONS.ADE, , 27), (ECX_DOCUMENT_NUMBER, 100, 9285, , 27), (BES_PAYLOAD_OBJECT, 100, false, , 27), (ECX_ATTACHMENTS, 100, , , 27), (ECX_TRANSACTION_TYPE, 100, XKLB, , 27), , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , )), 0, , )
When I tried to select APPLSYS.WF_WS_JMS_IN for the 2nd time, there is no result, which means the business event has been triggered, right?
So in this point I still don't have any idea why the process is (likely) ended after enter the Queue and the message can't store into B's database yet.
Do I miss any setup when changing from OXTA into SOAP protocol to send XML message?
Any urgent help most appreciated.
Best Regards,
RhezaHi,
Did you ever get any answers to this? We are thinking about the same thing.
Thanks
Darma
[email protected] -
Urgent...integrate EBS R12.0.5 with Oracle Retail 12.0.5 using BPEL..
Hi All
We have to integrate EBS R12.0.5 with Oracle Retail 12.0.5 using BPEL..
can any one please tell me what are the patch sets that need to be applied to
EBS R12.0.5
Oracle Retails
BPEL
The documentation available on metalinks is for EBS R12.0.2 integration with Retail 12.0.5
is there any document which can help us with EBS R12.0.5 integration with Retail 12.0.5
thanks
ArshadDuplicate thread (please post only once):
Urgent...integrate EBS R12.0.5 with Oracle Retail 12.0.5 using BPEL
Re: Urgent...integrate EBS R12.0.5 with Oracle Retail 12.0.5 using BPEL.. -
URGENT: Oracle EBS 12.1.3 to Apex 4.1.1
Hi Friends,
I am trying to open Apex page via Oracle EBS responsibility.
I performed steps as given by Oracle White paper on Integrating Oracle EBS to APEX
http://www.oracle.com/technetwork/developer-tools/apex/learnmore/apex-ebs-extension-white-paper-345780.pdf
1. Create Application in Oracle Apex.
2. set EBS Profile FND:APEX URL to" http://<APEX_HOME>:8080/pls/apex"
3. Create a Function of JSP type with URL "GWY.jsp?targetAppType=APEX&p=100:101"
4. Create Menu of ( Type as HOME page) and attach in resp.
When I try to Open the Apex application it gives me below error : "HTTP: 500 Internal server Error"
I tries to open this URL
"<EBS_HOME>:8010/OA_HTML/RF.jsp?function_id=47586&resp_id=50663&resp_appl_id=20003&security_group_id=0&lang_code=US¶ms=s84C7wWix3DIkoiRBOSZDu89Q3n738-8cvNF4q24wEE"
I have cleared the cache of Oracle EBS from Functional admin resp . I have cleared the cache of browser. but no luck.
Please help on it.
Edited by: user11672064 on Nov 30, 2012 6:38 AMHi Friends,
I am trying to open Apex page via Oracle EBS responsibility.
I performed steps as given by Oracle White paper on Integrating Oracle EBS to APEX
http://www.oracle.com/technetwork/developer-tools/apex/learnmore/apex-ebs-extension-white-paper-345780.pdf
1. Create Application in Oracle Apex.
2. set EBS Profile FND:APEX URL to" http://<APEX_HOME>:8080/pls/apex"
3. Create a Function of JSP type with URL "GWY.jsp?targetAppType=APEX&p=100:101"
4. Create Menu of ( Type as HOME page) and attach in resp.
When I try to Open the Apex application it gives me below error : "HTTP: 500 Internal server Error"
I tries to open this URL
"<EBS_HOME>:8010/OA_HTML/RF.jsp?function_id=47586&resp_id=50663&resp_appl_id=20003&security_group_id=0&lang_code=US¶ms=s84C7wWix3DIkoiRBOSZDu89Q3n738-8cvNF4q24wEE"
I have cleared the cache of Oracle EBS from Functional admin resp . I have cleared the cache of browser. but no luck.
Please help on it.
Edited by: user11672064 on Nov 30, 2012 6:38 AM -
URGENT: No chart in EBS output concurrent program
I create a template with chart, when i previous it with the template builder it works.
But if i use EBS concurrent program no chart is display in the output.
If someone has ideas to this, please help me
ThanksHi Thiamass
I think that he chart rendering libraries are not present in your appltop. We use an Oracle component called bibeans and their libraries are probably not present.
I have ploughed through metalink but can not find the patch. Pls log a TAR and support can help you out, pls log it against 'BI Publisher (formerly XML Publisher)'
Regards
Tim -
URGENT: Extend EBS with APEX (new Tab Menu = Function/ html call to APEX)
Hello everyone,
we are trying to extend EBS with APEX applications:
- Created function XX with type = JSP (HTML Call = GWY.jsp?targetAppType=APEX&p=100:1)
If we add/ call this function on a standard EBS main menu, it works fine and calls the APEX page with the correct URL (configured on system profile "FND: APEX URL").
But we want to add these APEX functionality on a Level 2 Tab Page / EBS Subtab menu (Menu type = "HTML Sub Tab").
Is it possible to add the APEX page to this level?
I mean, add APEX page on a "frame" associated to the new EBS subtab menu (like a "region" on the EBS page) ?
Thanks in advance for any help or support.
AG.
Edited by: user8194796 on 16/Fev/2012 1:52
Edited by: user8194796 on 16/Fev/2012 1:54Hi;
please check below thread and note and compare it wiht your steps
How to install APEX in R12 Environment
Regard
Helios -
Help on EBS bank account URGENT PLEASE!!!!!!!!!!!!!!!! ASAP
We started uploading EBS for one of our payroll accounts last month. Now we figured it out that all transactions in that account were wrong and some transactions were duplicated .One of the user wants to know can we delete all history in that account and reupload the bank statement again. If its possible please suggest me how to do.
solved
-
EBS-Interconnect Integration problem - Need Urgent Help
Hi,
I am facing problem while trying to connect Oracle Interconnect with Oracle ESB using BEPL Plug-in feature.
I was actually going though one document on ESB-Interconnect integration and follow all the steps. It did create an entry to ESB console but not able to import Interconnect's BPEL Plug-in Application to ESB console (What I was expecting to get after completing ESB-Interconnect integration).
All step that I have covered are given below. Can someone help me ASAP. This is kind of a show stopper issue for me.
For more information you can email at [email protected] or call me at +1 412 296 2094.
Bunch of thanks in adance.
Note - I am not able to print OUTPUT section in this post, So anyone need that I can send in different Email.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1. Open Command Prompt
CD to the folder where admin_client.jar is located
2. Deploy "IcAdapter"
java -Djava.util.logging.config.file=logging.properties -jar admin_client.jar deployer:oc4j:opmn://localhost:6004/home oc4jadmin welcome1 -deploy -file c:\product\10.1.3.1\OracleAS_1\integration\esb\lib\icAdapter.rar -deploymentName ICAdapter
3. Deploy "icwsilplugin"
with log:
java -Djava.util.logging.config.file=logging.properties -jar admin_client.jar deployer:oc4j:opmn://localhost:6004/home oc4jadmin welcome1 -deploy -file c:\product\10.1.3.1\OracleAS_1\integration\esb\lib\icwsilplugin.ear -deploymentName icwsilplugin -parent default
4. Bind "icwsilplugin"
java -Djava.util.logging.config.file=logging.properties -jar admin_client.jar deployer:oc4j:opmn://localhost:6004/home oc4jadmin welcome1 -bindWebApp -appName icwsilplugin -webModuleName icwsilplugin -webSiteName default-web-site -contextRoot /ic
5. Shutdown and restart the ESB server
6. Run the "regadapters.bat/sh script" from ORACLE_HOME\integration\esb\bin (for this case its c:\product\10.1.3.1\OracleAS_1\integration\esb\bin) directory.
7. Start Interconnect database and repository.
8. Change "oc4j-ra.xml" located in "<esb_home>\j2ee\home\application-deployments\default\IcAdapter (for this case - c:\product\10.1.3.1\OracleAS_1\j2ee\home\application-deployments\default\IcAdapter)" with following details:
<?xml version="1.0"?>
<oc4j-connector-factories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://www.oracle.com/technology/oracleas/schema/oc4j-connector-factories-10_0.xsd" schema-major-version="10" schema-minor-version="0" >
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
<import-shared-library name="oracle.xml"/>
</imported-shared-libraries>
<connector-factory location="eis/ICAdapter" connector-name="Interconnect Adapter">
<config-property name="applicationName" value="BPELPM"/>
<config-property name="driverClassName" value="oracle.jdbc.driver.OracleDriver"/>
<config-property name="connectionString" value="jdbc:oracle:thin:@ASC-587CDFCE:1521:ORCL"/>
<config-property name="userName" value="ichub"/>
<config-property name="password" value="tcsalc0a"/>
<config-property name="repoName" value="InterConnectRepository"/>
<connection-pooling use="none"></connection-pooling>
<security-config use="none"></security-config>
</connector-factory>
</oc4j-connector-factories>
9. Add <code-source path=”<IC_HOME>\integration\interconnect\lib\oai.jar"/> to the "Server.xml" file located in <ESB_HOME>\j2ee\home\config (for this case - c:\product\10.1.3.1\OracleAS_1\j2ee\home\config)
Given "<code-source path="C:\oracle\AS101202MID\integration\interconnect\lib\oai.jar"/>" in place of <code-source path="C:\oracle\mid\integration\interconnect\lib\oai.jar"/>
10. Restarted the ESB server to see desired output in ESB console.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
===========
OUPUT Details
===========
Expected Output:
================
A tree structure look like as below -
- adapters
applications
- InterConnect
- eis_ICAdapter_BPELPM
Implemented_Procedures
Invoked_Procedures
- Published_Events
Customer_AddCustomer
- Subscribed_Events
Customer_NewCustomer
legacy
Output that I am getting:
=========================
A tree structure look like as below -
- adapters
applications
InterConnect
- legacy
mvs08
Regards,
--KaushikI see what you are saying. Actually, I have already thought about that Option (Creating an AQ in between so that Oracle Interconnect can write to and EBS can read from for a particular message). Thanks for reminding me about this.
I was just trying to see Oracle Interconnect's BPEL Plug-in capabilities. I will try to run "regadapters.bat / sh" few more time to see if it works this time.
Unfortunately, I don't know dutch but you can always send me what you wrote. I will try to translate the same using some translator.
Thanks a lot for your help.
--Kaushik -
.Database upgrade from 10g to 11g in Oracle EBS 11i
Hi,
An urgent help is needed.I am upgrading Oracle Database from 10g to 11g.My EBS is version 11i.So after upgrading my database
from 10g to 11g as sa sanity check what are the parameters we need to take care of the EBS.My point is will there be any Application level changes if the database
is upgraded?Wiill the Workflow and what other things we had to do the sanity check if its working properly?Any Concurent Program level changes be affected?
Thanks and Regards
Edited by: 918308 on May 10, 2013 7:52 PM918308 wrote:
Hi,
Thanks for the info provided but i dont have the metalink id.Kindly can you provide me the link for the subjected docs so that i can relate.Any application level testing to be done?Concurrent Programs,Schedule Manager,Workflow etc.?We cannot post the contents of MOS docs since this violates Oracle support agreement policy.
You need to go a regular sanity check (i.e. submit concurrent programs, check workflow functionality, ..etc) -- E-Business Suite Diagnostics 11i Test Catalog [ID 179661.1]
Thanks,
Hussein -
Unable to start EBS DB after the Server Crash. Error in installing the Required RPM.
Hi , Hussein ( As most of the Time It is Only you here who comes to the rescue or give Usefull inputs. I am sorry if i mistaken, no Pan intended for Other Experts)
I 've also posted this issue here but got no response. https://forums.oracle.com/thread/2590497
Badly require your inputs and suggestions on the Following Issue. , Really Appreciate the suggestions.
I need to Install the sabayon-apply rpm which could fix the issue after the Server Crash but unable to install it.
Please see the Brief of the Issue.
I got stuck up in installing the rpm after the server(Red Hat Enterprise Linux Server release 6.0 (Santiago) x86_64 GNU/Linux) got
crashed Eventhough I am able to start it in Xwindows but not able to run or start EBS database along with many other programmes. Also The
VirtualBox machine installed on it 've No issue, they work fine But the host OS is not fine. as there are lots of
errors in .xsession-errors. which i 've pasted below. And Unable to Install the sabayon-apply rpm that could have fix the Issue.
I would highly Appreciate if anyone could drop few hints and suggestions on this Issue as this is really Urgently Important for me.
Please see the following Brief of the Issue.
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
While installing the rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps as it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
After That I could Not Install any rpm with yum or rpm command as getting the Same Errors.
while trying to install individual rpm am getting the followig Errors
[root@ebs Packages]# rpm -ivh libX11*
error: libX11-1.3-2.el6.i686.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
error: libX11-1.3-2.el6.i686.rpm cannot be installed
[root@ebs Packages]# rpm --checksig gtk2*
gtk2-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-docs-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-immodule-xim-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
For that I tried to import the RPM GPG Key But still faced the same errors
[root@ebs yum.repos.d]# wget http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 -O /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle Key fingerprint = 4214 4123 FECF
C55B 9086 313D 72F9 7B74 EC55 1F03
--2013-10-08 00:04:56-- http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
Resolving public-yum.oracle.com... 202.159.216.177, 202.159.216.171
Connecting to public-yum.oracle.com|202.159.216.177|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1011 [text/plain]
Saving to: “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
FINISHED --2013-10-08 00:05:06--
Downloaded: 6 files, 55K in 2.0s (27.7 KB/s)
100%[===========================================================================================================================================================>]
1,011 --.-K/s in 0s
2013-10-08 00:04:56 (155 MB/s) - “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
saved [1011/1011]
Than i run this command
[root@ebs yum.repos.d]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle ----it Returns with no output
[root@ebs yum.repos.d]#
[root@ebs log]# rpm -q gpg-pubkey-ec551f03-4c2d256a
gpg-pubkey-ec551f03-4c2d256a
But still I can't install the rpms, got the same Errors. please see the following
[root@ebs yum.repos.d]# yum install firefox*
Loaded plugins: refresh-packagekit, rhnplugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Downloading Packages:
(1/2): firefox-17.0.9-1.0.1.el6_4.x86_64.rpm
| 25 MB 03:42
(2/2): xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
| 14 MB 02:03
Total
117 kB/s | 39 MB 05:46
error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD
Problem opening package xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
[root@ebs log]# rpm -qf `which gpg`
error: rpmdbNextIterator: skipping h# 455 Header V3 RSA/SHA256
Signature, key ID fd431d51: BAD
[root@ebs log]# gpg --list-keys
/root/.gnupg/pubring.gpg
pub 1024D/11F63C51 2002-02-28
uid Jamie Cameron <[email protected]>
sub 1024g/1B24BE83 2002-02-28
pub 2048D/671DF296 2013-10-08
uid oracle
sub 2048g/9FE459CE 2013-10-08
pub 1024R/F3A5AC78 2013-10-08
uid oracle (no comment) <[email protected]>
sub 1024R/6DC65985 2013-10-08
pub 1024R/78F6C944 2013-10-08
uid root user (Example GPG Key Signature For RPM
Packages) <[email protected]>
sub 1024R/77C97AFF 2013-10-08
[root@ebs log]# rpm -qi 'gpg-pubkey-*'
Name : gpg-pubkey Relocations: (not relocatable)
Version : ec551f03 Vendor: (none)
Release : 4c2d256a Build Date: Wed 09 Oct
2013 01:09:10 AM IST
Install Date: Wed 09 Oct 2013 01:09:10 AM IST Build Host: localhost
Group : Public Keys Source RPM: (none)
Size : 0 License: pubkey
Signature : (none)
Summary : gpg(Oracle OSS group (Open Source Software group)
<[email protected]>)
Description :
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: rpm-4.8.0 (NSS-3)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=M8XY
-----END PGP PUBLIC KEY BLOCK-----
I 've tried to remove the existing keys But Not able to remove them as well.
Is this the right way of removing the keys ?
rpm -e --allmatches 'gpg-pubkey-ec551f03-*' the ec551f03 is the
version of rpm -qi 'gpg-pubkey-*' query... Please correct
Could you tell what I am missing here that's causing the Issue.
Following are the Errors that is observed in .xsession-errors log file
===== BEGIN RING BUFFER (/usr/sbin/sabayon-apply) =====
MainThread 2013/10/08 18:34:23.3001 (sabayon-apply): No profile for
user 'root' found
MainThread 2013/10/08 18:34:23.3005 (sabayon-apply): Fatal exception!
Exiting abnormally.
MainThread 2013/10/08 18:34:23.3009 (sabayon-apply): Traceback (most
recent call last):
File "/usr/sbin/sabayon-apply", line 149, in <module>
sys.exit (util.EXIT_CODE_NO_USER_PROFILE)
SystemExit: 3
===== END RING BUFFER (/usr/sbin/sabayon-apply) =====
This configuration for the debug log can be re-created
by putting the following in ~//etc/sabayon/sabayon-debug-log.conf
(use ';' to separate domain names):
[debug log]
max lines = 1000
gnome-session[3707]: EggSMClient-WARNING: Desktop file
'/etc/xdg/autostart/esc.desktop' has malformed Icon key
'esc.png'(should not include extension)
GNOME_KEYRING_SOCKET=/tmp/keyring-x5SKbN/socket
SSH_AUTH_SOCK=/tmp/keyring-x5SKbN/socket.ssh
Failed to play sound: Not available
(polkit-gnome-authentication-agent-1:3917): GLib-GObject-WARNING **:
cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:3917): GLib-CRITICAL **:
g_once_init_leave: assertion `initialization_value != 0' failed
W: main.c: This program is not intended to be run as root (unless
--system is specified).
** Message: applet now removed from the notification area
** (gnome-user-share:3948): WARNING **: gnome-user-share cannot be
started as root for security reasons.
08/10/2013 06:34:26 PM Autoprobing TCP port in (all) network interface
08/10/2013 06:34:26 PM Listening IPv{4,6}://*:5900
08/10/2013 06:34:26 PM Autoprobing selected port 5900
08/10/2013 06:34:26 PM Advertising authentication type: 'No Authentication' (1)
08/10/2013 06:34:26 PM Advertising security type: 'No Authentication' (1)
Initializing nautilus-gdu extension
Initializing nautilus-open-terminal extension
** Message: applet now embedded in the notification area
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e00019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
kio_http_cache_cleaner: Already running!
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x5200004
specified for 0x5200019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e08cb7 (timesofind).
libpng warning: Extra compressed data in IDAT
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e0a6e3 (Server Aut).
Highly appreciate the response.
Thanks And Regards
MZThe Packaged are already there on the server as the RHEL software DVD is copied on the server.
Yes it was working before the crash, And Even after the Crash i.e
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
and was in the process of installing the sabayon rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps from RHEL software Packages directory.
and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
After that I could Not install any rpm from rpm or yum command.
I 've Downloaded the new sabyon* and Other rpms from the net and tried to install them with rpm or yum command but
got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
with yum am getting this error
error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
The Reinstallation of OS is not AN Option for me rightnow.
Could you tell something which i could try & may be that works.
Thanks
MZ -
There are some form errors after upgrading ebs from 12.1.1 to 12.1.3
Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan LingHi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling -
Login Button for Oracle EBS 12.1.3
We have an environment of Oracle EBS 12.1.3 with OracleAS SSO Server 10g. Now with this configurations, if the login page of Oracle EBS is accessed directly, the login butting gives a dynamic value by generating a random number with it, <button title="Login" class="x7m" id="SubmitButton" style="background-image: url(/OA_HTML/cabo/images/swan/btn-bg1.gif);" onclick="submitForm('DefaultFormName',1,{'_FORM_SUBMIT_BUTTON':'SubmitButtong3weV873'});return false" type="submit">.
However, on a different installation of Oracle EBS 12.1.3 without the OracleAS SSO Server, the login button does not present this dynamic value. We did some troubleshooting and found out that this value of the login button changes because of the OracleAS SSO server. Now although we have removed and de-registered the Oracle EBS from OracleAS SSO server, the value of the login button is still dynamic.
Now need help here to know if there is any setting of the OracleAS SSO Server still present which has the Oracle EBS perform this way. How can I ensure a complete removal of OracleAS SSO server.
Secondly, if anybody might be aware of the cause of the dynamic value of the login button only in this installation.
Need some urgent help here.Yes, based the the value of the dynamic value of the login button
This should not be the reason of suspecting that SSO is not completely deregistered from the application.
Please run the SSO diagnostic script(s) to verify the above.
R12.0.6+ : Oracle Application Object Library Is SSO Mode On Health Check Test (Doc ID 732285.1)
Diagnostic Test Catalog for 12.1.3 (Doc ID 1083807.1) -- SSO Setup Tests
Thanks,
Hussein -
EBS - How does it clear Check/ACH Clearing GL Account ?
Hi
I have a query about specific aspect of EBS processing. Please let me know-
Scenario:-
1. Vendor Invoice is created through PO.
2. F110 Payment run creates ZP document and clears vendor invoice line item. It has following entries -
Dr Vendor
Cr Check Out / ACH Out Clearing GL Account
3. When EBS file is imported and processed, Will it clear multiple Check / ACH Clearing GL Account ( in ZP documents ) together ? OR Will it create separate accounting document to clear Check/EFT Clearing GL Account entries ?
example:- If two vendor invoices ( of different vendors ) were paid in same F110 run by ACH payment.
Will Bank Reconciliation process create two accounting document to clear 'ACH Out Clg' GL Account ? or Will it create a single accounting document that will have debit to "ACH Out Clg" for total sum ?
Hope I have made myself clear.
-Regards
KapilHello,
Could you please give one example for NCHK trans type
how that will appear in bank statement?
Say. I have one open item in O/G GL for
vendor ABCD
Check# 123456
Amount 1010.00
Payment Doc# 2000000000
Will it appear like this?
:60F:C140825INR0,00
:61:1408250825D1010,00NCHK123456-ABCD/2000000000
:86:123456- ABCD
:62F:C140826INR0,00
:64:C140826INR0,00
-}{5:}
Please help urgently..
Sunil -
Not able to integrate SOA Suite with EBS using Oracle APPS Adapter
Hi,
We need to listen to outbound business events of Oracle EBS using BES via Oracle APPS Adapter.
We have created a composite containing Oracle Application Adapter and BPEL Process.
In Apps adapter when configured Outbound Business events "oracle.apps.bom.component.modified" using Dequeue Operation,a corresponding subscriber is created in WF_BPEL_Q for respective event selected.
In Oracle EBS
for "oracle.apps.bom.component.modified" status is enabled and in subscription WF_BPEL_QAGENT is there.
When we are changing any BOM component in Oracle EBS Designer and saving it, a record is being created in "WF_BPEL_QTAB".
BPEL Process( Oracle Apps Adapter Partner Link---> Recieve Actvity ) instances are not being created when any BOM component is being changed.
Oracle Apps Adapter is not able to dequeue the data from WF_BPEL_QTAB.
There is not any error/exception in oracle soa suite server logs for Oracle APPS adapter.
SOA Diagnostics Logs are :
[2012-07-04T08:55:51.304+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.bpel.engine] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] CubeServiceEngine=> initing default/Testr!4.0*soa_f1fe3bbc-1269-437c-a75f-1239da743fea/BPELProcess1
[2012-07-04T08:55:51.304+05:30] [AdminServer] [NOTIFICATION] [] [oracle.integration.platform.blocks.deploy] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Publishing deploy event for default/Testr!4.0*soa_f1fe3bbc-1269-437c-a75f-1239da743fea
[2012-07-04T08:55:51.382+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :load Loading bom_cm_apps.jca ..
[2012-07-04T08:55:51.390+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm Performing JCAEndpointActivation::prepareActivation for {AppsEventSchema=ANY_SCHEMA, MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.bom.component.modified', Consumer=ORA_8cpkad9l88sj0c9n8kq42ghm85, QueueName=WF_BPEL_Q, DatabaseSchema=APPS}
[2012-07-04T08:55:51.391+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::prepareActivation - Locating JCA Binding Component instance: SCA_AS11R1
[2012-07-04T08:55:51.397+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> JCABinding=> Instantiating inbound part of JCA Binding Component instance: SCA_AS11R1
[2012-07-04T08:55:51.397+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::initiateInboundJcaEndpoint - Creating and initializing inbound JCA endpoint for:[[
endpoint='bom_cm'
WSDL location='oramds:/deployed-composites/default/Testr_rev4.0/bom_cm.wsdl'
portType='DEQUEUE_ptt'
operation='DEQUEUE'
*activation properties={AppsEventSchema=ANY_SCHEMA, MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.bom.component.modified', Consumer=ORA_8cpkad9l88sj0c9n8kq42ghm85, QueueName=WF_BPEL_Q, DatabaseSchema=APPS}*
[2012-07-04T08:55:51.398+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::initiateInboundJcaEndpoint - Creating endpoint (0) for bom_cm
[2012-07-04T08:55:51.407+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::prepareActivation - Done preparing JCAEndpointActivation for Service 'bom_cm'
[2012-07-04T08:55:51.409+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :load Successfully loaded bom_cm_apps.jca
[2012-07-04T08:55:51.410+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :init Initializing bom_cm_apps.jca
[2012-07-04T08:55:51.410+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::performActivation - Performing JCA Endpoint Activation, Endpoint Id='bom_cm'
[2012-07-04T08:55:51.410+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm Performing endpoint activation (1) for bom_cm
[2012-07-04T08:55:51.411+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr JCA Binding Component instance: SCA_AS11R1 - endpointActivation for portType=DEQUEUE_ptt, operation=DEQUEUE
[2012-07-04T08:55:51.416+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr Creating new instance of Resource Adapter oracle.tip.adapter.apps.AppsResourceAdapter
[2012-07-04T08:55:51.417+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr JCA Binding Component instance: SCA_AS11R1 - starting Resource Adapter oracle.tip.adapter.apps.AppsResourceAdapter
[2012-07-04T08:55:51.471+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Oracle Applications Adapter Starting...AQResourceAdapter
[2012-07-04T08:55:51.474+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Oracle Applications Adapter Creating Endpoint...
*[2012-07-04T08:55:51.482+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Oracle Applications Adapter Activating Endpoint...*
*[2012-07-04T08:55:53.782+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr JCA Binding Component instance: SCA_AS11R1 - successfully completed endpointActivation for portType=DEQUEUE_ptt, operation=DEQUEUE*
*[2012-07-04T08:55:53.783+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :init Successfully initialized bom_cm_apps.jca*
*[2012-07-04T08:55:53.783+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@c8ccf1] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,1:30342] [APP: soa-infra] Dequeue Agent activated....*
Regards,
Abhinav Gupta
Edited by: Abhinav on Jul 5, 2012 9:56 AMWe would like to capture a few business events in oracle BOM and PO that are of interest to us. In order to do this,
we deploy oracle SOA composite with BEPL in the Oracle Fusion Middleware Control. The oracle SOA composite is configured for a particular outbound business event. It should listens on a specific queue WF_BPEL_Q or WF_BPEL_QTAB and de-queues the messages from that Oracle Queue or Oracle AQ Table. In jDeveloper 11g we created a SOA project with oracle applications adapter partner link and a receive.
Specifically we are trying to capture the business outbound event oracle.apps.bom.component.modified just to get the event data in this receive.
Partner link configuration: We added the database connection to the oracle EBS instance. Tested it and we
succeded. Chose ANY_SCHEMA in partner link configuration.
We ensured that the JNDI Name here( eis/Apps/Apps ) match the JNDI name provided in the weblogic-->Deployments--
OracleAppsAdapter -->Configuration --> Outbound Connection Pools. For this outbound resource pool, Connection factory interface was javax.resource.cci.ConnectionFactory. Property name xADataSourceName was mapped to JNDI name of the configured JDBC datasource in the weblogic. When we created the connection pool. We tested and it worked fine. This data source had the connection pool configured to the oracle applications schema with APPS user.
After adding the partner link with the above configuration, we added a receive. We deployed this configuration to the middleware. We went to the oracle EBS modified a BOM component and we expected to having running BPEL instances against the deloyed composite. However, the problem is we are not having any running instance for the composite.
We found that there are entries in the view AQ$WF_BPEL_QTAB with an ENQ_TIME and ENQ_TIMESTAMP but with no DEQ_TIME or DEQ_TIMESTAMP. The ENQ_TIMESTAMP corresponds to the time we modified BOM in oracle BOM forms/Designer
The data is being written in WF_BPEL_QTAB for the BOM changes but not being dequeued by oracle applications adapter/composites deployed in soa server.
Please help me it quite urgent.
Is there anything we are missing on EBS side to be activited. for the events to be dequeued
Any Help is appreciated.
Abhinav
Maybe you are looking for
-
IOS 6 seems to be causing multiple typing errors. The problem didn't occur before ios6. I have delayed ipad toeing iPhone 4 forbear ofmthensame problems. As an example, I did not,go,correct mistakes in last sentence that iPad 'corrected' Any ideas of
-
This might be really dummy question: Which table(s) can I see how many orders were created for a particular PO? And what's the PO status (if that exists)? Thank you.
-
Mac Mini slower performance after Mavericks upgrade
I'm experiencing a severe performance degradation and all the suggestions in the discussions so far haven't helped (Verify/repair disk -no issues found, Safe Boot, reinstall Mavericks). Any Suggestions on what to try next? Thank you! Model Name:
-
PSE 10 Organizer; Fichiers TIF et JPG non reconnus.
Bonjour J'ai scanné des clichés 35 mm sur scanner à plat(EPSON V500) et scanneur films et diapos (Silvercrest). Sorties en JPG et TIF dans les deux cas. Quelques uns de ses fichiers avaient été correctement importée dans PSE 10. Après
-
Oidpasswd scripting question for oracladmin unlocking in oid
Is this the correct forum? I want to know if there is a way to pass the password to oidpasswd without being prompted like I can with ldapbind. So when I need to unlock an account, I just run this with 1 line. I want to script it. I only found 1 page