EBS11i in single node, could be database in 64 bits?

Hi,
customer has 11i with 9i 32 bits in a Solaris 9 Sparc 64bits, and need upgrade database to 64 bits. Firstly they want to upgrade to a 9i 64bits software, is this possible?or it's only cerified with split configurations?
Thanks,
Alvaro.

Hi,
If you to certify (https://support.oracle.com/CSP/ui/flash.html#tab=Certification(page=Certification&id=gbngesgz()),(page=CertificationRefinement&id=gbngf0gs(filterProdCatDispName=Oracle%20E-Business%20Suite&viewingMode=1142&categoryId=3-F8H7JI)),(page=CertificationRefinement&id=gbngf0iy(filterProdCatDispName=Applications%20Technology&viewingMode=1142&categoryId=3-F8H7UA&clickStreamSource=tree)))
you can see that 9i 64 bits are certified for Solaris 9 for Oracle Applications, then I understand that we can migrate actual 9i 32bits to 9i 64bits all in the same tier. What Split COnfiguration Notes means is taht you can run the database tier on a noncertified platform for apps, but only the database in this platform, none applications tier. What do you think?
Thanks,
Alvaro.

Similar Messages

Gettig the error at the end of single node installation on OEL5.6 32-bit

Gettig the following error at the end of single node installation on OEL5.6(32-bit)
I am getting the following error enf of the single node installation on OEL5.6(32-bit). I have installed the following RPMs
rpm -Uvh sysstat
rpm -Uvh libaio-devel
rpm -Uvh compat-libstdc++
rpm -Uvh compat-libstdc++
rpm -Uvh xorg-x11-libs-compat-
rpm -Uvh unixODBC-2.2.
rpm -Uvh unixODBC-devel
rpm -Uvh libXp-
rpm -Uvh openmotif21
These are following failed, when I clicked the respective button I get these respective errors...
HTTP
checking URL = http://linux1.oracle.com:8001
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page
checking URL = http://linux1.oracle.com:8001/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
SP
checking URL = http://linux1.oracle.com:8001/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Please let me know how to fix this.
Thanks.
Joy.

Helios,
While starting the application I am getting the following...
============================================
[applprd1@linux1 scripts]$ ./adstrtal.sh
You are running adstrtal.sh version 120.15
Enter the APPS username: apps
Enter the APPS password:
The logfile for this session is located at /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adstrtal.log
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adopmnctl.sh start
script returned:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adopmnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adalnctl.sh start
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Listener APPS_PRD1 has already been started.
adalnctl.sh: exiting with status 2
adalnctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adapcctl.sh start
script returned:
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
adapcctl.sh: exiting with status 204
adapcctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adapcctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adoacorectl.sh start
script returned:
You are running adoacorectl.sh version 120.13
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 150
adoacorectl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adformsctl.sh start
script returned:
You are running adformsctl.sh version 120.16
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 150
adformsctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adoafmctl.sh start
script returned:
You are running adoafmctl.sh version 120.8
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 150
adoafmctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adcmctl.sh start
script returned:
You are running adcmctl.sh version 120.17.12010000.3
Starting concurrent manager for PRD1 ...
Starting PRD1_0627@PRD1 Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
adcmctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adcmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /u01/prd1/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for PRD1 on port 9301 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
adstrtal.sh: Exiting with status 4
adstrtal.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adstrtal.log for more information ...
===============================================
[Service Control Execution Report]
The report format is:
<Service Group> <Service> <Script> <Status>
Root Service Enabled
Root Service Oracle Process Manager for PRD1_linux1 adopmnctl.sh Started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP Server PRD1_linux1 adapcctl.sh Failed
Web Entry Point Services OracleTNSListenerAPPS_PRD1_linux1 adalnctl.sh Already Started
Web Application Services Enabled
Web Application Services OACORE OC4J Instance PRD1_linux1 adoacorectl.sh Failed
Web Application Services FORMS OC4J Instance PRD1_linux1 adformsctl.sh Failed
Web Application Services OAFM OC4J Instance PRD1_linux1 adoafmctl.sh Failed
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrPRD1_linux1 adcmctl.sh Started
Batch Processing Services Oracle Fulfillment Server PRD1_linux1 jtffmctl.sh Started
Other Services Disabled
Other Services OracleFormsServer-Forms PRD1_linux1 adformsrvctl.sh Disabled
Other Services Oracle Metrics Client PRD1_linux1 adfmcctl.sh Disabled
Other Services Oracle Metrics Server PRD1_linux1 adfmsctl.sh Disabled
Other Services Oracle MWA Service PRD1_linux1 mwactlwrpr.sh Disabled
ServiceControl is exiting with status 4
Thanks.
Joy.
Edited by: user11952526 on Jun 26, 2011 11:51 AM

12.1.3 EBS single node 11.2.0.3 database to 2 node RAC with ASM

Hi,
We are planning to convert single node local/ordinary file system 11.2.0.3 database to 2 node RAC with ASM.
Please help me in creating the roadmap for the same.
e.g
1. Create the shared raw file system
2. Create diskgroup for ASM
3.. Convert the local file system to ASM first
etc, etc
This is the first big task hence need expert guidance.

Please refer to:
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 (Doc ID 823587.1)
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap (Doc ID 1072636.1)
Thanks,
Hussein

Upgradation of Primary (RAC) two node database and single node standby DB

We have our primary setup in Oracle RAC in 10g R2 (10.2.0.1.0) in HP UX 11i 64bit (PA RISC). It is a two node RAC.
And we have a single node standby database (DR).
Both the primary and standby database are existing in 10.2.0.1.0
We need to upgrade the primary and standby database from 10.2.0.1.0 to 10.2.0.4.0
Am planning to go through the DBUA method for upgrading the database.
I like to know is there any special cases for upgrading both the primary and standby database.
since as i mentioned i will upgrade the database through dbua method, and if i upgrade my standby database as same as primary,
will it forcefully open the database, because while we upgrade the database through dbua it will open the database at the end of installation.
Is it possible to upgrade the standby database with DBUA method even when my standby database is in Mount state.
I will be helpfull if anyone has done this earlier, are there any know issues and is there any good document which i can refer.
with regards
A.Aravind

hi,
thanks for your reply, and i was following the document.
I like to know that is it mandatory to create a new Oracle Home for upgrading from 10.2.0.1.0 to 10.2.0.4.0
or i can proceed the installation of software in the same oracle home.
I will list out my action plan, please correct me if am wrong,
In Primary RAC,
a) Shutdown the database
b) Shutdown the asm instance
c) Stop the nodeapps services
d) Stop the cluster ready services.
e) Stop the enterprise manager
f) Stop the isqlplus
In Standby single node database,
1)Cancel the managed Recovery process
2) shutdown the database
3) Shutdown the asm instance.
PATCHING Process
g) Apply the oracle clusterware patch 10.2.0.4.0 in the same old existing ORA_CRS_HOME
h) Apply the oracle database software patch 10.2.0.4.0 in the same old existing ORACLE_HOME
Note: In my case both the ORACLE_HOME and ASM_HOME are in the same location.
i) Execute dbua to update the database in the primary database.
j) Apply the 10.2.0.4.0 patch in standby database ORACLE_HOME where as ORACLE_HOME and ASM_HOME are in the same location
k) Copy the recently generated archive logs from primary to standby manually and apply in standby database.
l) Mount the database in standby
m) Start the Managed recovery process.
with regards
A.Aravind

Multiple ASM Instances on single node

Hi All,
After going through some threads it seems to me that multiple ASM instances on a node is not supported and recommended by ORACLE but i coudn't find any ORACLE document or support matrix mentioning this. Can any one give me a pointer to this. Please correct me if i am wrong and Multiple ASM instances are fully supported by ORACLE.
Thanks,

Multiple ASM instances on a single node are supported but not recommended due to several issues you could encounter during that kind of configuration.
Possible interraction between those instances for identification of each disk area usage,each disk area permissions , database instance to asm instance mapping and so on, could result in unwanted behaviour, as ASM is in some way just oracle's representation of LVM.
Intention is that any kind of distinction/separation of oracle related data under the ASM should be done through the disk groups.
So it seems it would be better to apply this kind of logic rather than doing suspiciously magical and rare configurations that could bring you similiary strange and unexpected problems.

How to migrate DB from single node 10gR2 to RAC 11gR2 on diff platform?

How to migrate DB from single node 10gR2 to RAC 11gR2 on different platform with possible minimum downtime? We have a situation of upgrade/migrate oracle 10gR2 single instance DB to 2-node RAC 11gR. The source OS is Solaris 10 on SPARC and the target OS is Linux (the target servers could be changed to Solaris 11 x86 if needed). What is the best solution on that?
Thanks,

Technically, can do the following for upgrading and migration?
1. Create 11gR2 oracle home on the same server and upgrade the database from 10gR2 to 11gR2 by running conversion (2 hour down time?)
2. Set up Heterogeneous Primary and Physical Standbys by RMAN. The standby is the RAC with ASM. No need down time. (from Solaris Space to Linux - this may be a problem)
3. At the cutoff time, activate the standby DB from the RAC ASM.
If feasible, do we have some detail guild line for each step?

How to run all Concurrent Requests in a single node in a multi node env

DB;11.1.0.7
Oracle Apps:12.1.1
OS:Linux 86x64 Red Hat
PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?
Thanks for your time!
Regards,

PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?Concurrent requests will be processed by the CM nodes and it has nothing to do with the 3 web tier nodes you have.
If you mean the database instance, then please see these docs.
How to run a concurrent program against a specific RAC instance with PCP/RAC setup? [ID 1129203.1]
In A PCP/RAC Configuration, How To Find Out On Which RAC Instance FNDSM Is Currently Running? [ID 1089396.1]
Thanks,
Hussein

Migration ( Splitting Single Node to 2 Node Cross Platform)

Hi,
I have 11.5.10 Single Node Installation( Database and Middle Tier) on Red Hat AS 4.0....Both Database and Application Tier on same machine.......
My Client is insisting me to move Application Tier to another machine having Windows 2003 32bit/64bit...
How can I do it...
Can I follow this document........304489.1 - Using Oracle Applications with a Split Configuration Database Tier on Oracle 9i Release 2....
But above document says...splitting Database Tier to other machine...

This is just wrong in so many ways...
1) You will never be able to hot patch on the Windows tier.
2) You will need to reboot the server frequently to clear memory leaks etc
3) You will have to reboot after almost every security update for the OS
4) As stated earlier, you are moving from the primary development platform to like a tier 3 platform
5) Memory utilization on 32-bit Linux is light years ahead of memory utilization on 32-bit Windows
Most of us could probably rattle off a dozen more reasons why this is not a good idea...
You will support more users with a higher quality of service by standing up an application tier node on Linux than you will on Windows. You could also just add a 64-bit linux node and migrate the database to 64-bit there using the split configuration docs and leave you admin/web/forms/CP tier on Red Hat 32 bit.

How to Parse only single node

Hi:
I am DOM parser and i want to parse only single node. That is,
String xmlRecords = "<name>Anup</name>";
Here i want to parse name node.
So can any body help me in that?
Edited by: user11688398 on Jul 22, 2011 1:12 AM

Ram wrote:
Peter Lawrey wrote:
Using String manipulation is likely to be faster than using a DOM (assuming you had valid XML) however if performance were an issue you would use JDBC to access the database.What will happen, if OP has large number of nodes in the string? Will String manipulation be the faster one? String manipulation will be faster only if the string has one or two nodes. Otherwise it will be complicated.Direct String manipulation will always be faster. This is because you can make assumptions a full DOM will not make (as it needs to be able to read any type of XML document)
For this reason its best avoided unless you really need the speed as any subtle change in the XML could break a simplified parser.
Peter Lawrey wrote:
Make sure you have proper XML (not just a fragment) and use a document parser as EJP suggests.EJP didn't suggest anything, rather he did changed the conversation in wrong direction.I have been reading too many posts which look the same. Sabre not EJP made a suggestion. ;)

Install a grid infrastructure for a cluster for single node Windows Server

Hello,
Can you suggest me how to install a Oracle Single Node RAC 11g on a Windows Server 2008 x64 bits? It's for testing purposes and I don't need two nodes. I know that Linux is better, but my company only uses Windows servers. Our former consultant was able to do it, but didn't tell us how to and that server was lost.
I know that we have to install first Grid Infrastructure. Running the "Oracle Grid Infrastructure" installer, I could successfully install a "Grid Infrastructure for a Standalone Server". But that grid is not for a RAC database. When trying to install the Database software, it allowed to me to only install "Single instance database", not "Real Application Cluster database installation".
Running the "Oracle Grid Infrastructure" installer, I tried to select option:
"Install and Configure Grid Infrastructure for a Cluster" -> Typical Installation:
SCAN Name: SRVORAC-cluster
Validating SCAN information
INS-40922 Invalid SCAN Name - unresolvable to IP address.
Is it possible to install a grid infrastructure for a cluster for a single-node or one-node Windows Server ?
Edited by: user521219 on Jan 30, 2012 12:46 PM

HI,
You probably have misconception about Single node RAC. This feature does not need that you have only one physical machine in a RAC, it actually means that in a RAC environment (2 or more nodes), you can run your database on only one node(single instance) and then later you can move this single instance to any other node of the RAC (so that you can do some patching on this node making your database available all the time). This also has some other benefits, see bellow.
http://www.oracle.com/technetwork/database/clustering/overview/ug-raconenode-2009-130760.pdf
http://docs.oracle.com/cd/E11882_01/install.112/e25666/whatsnew.htm#sthref8
Salman

2 Node RAC with Single Node Standby Help

Hello Everyone -
I'm preparing to set up a 2 node RAC and use a single-node standby database.
I'm a bit confused on how to set up the Standby Redo Logs on the standby to use the LGWR functionality from the RAC instances.
Should I just create a set of standby redo logs (alter database add standby logfile...) like on a single-instance environment or do I need to create standby logfile threads (alter database add standby logfile thread. . . ) one for each cooresponding thread on the RAC?
It just seems odd that 2 RAC redo threads are able to write to one standby redo logfile at the same time (or maybe each RAC redo thread picks the first available standby redo log and writes to it??)
If anyone has some advice or insight, I'd appreciate it.
Andy

Hello Andy,
Did you get answer to your question about RAC with single standby?
Could you please share with me your experience if you have done so.
Thanks
Amit

Can there be multiple ASM instances on single node?

Hi,
Can there be multiple ASM instances on single node?
This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
Thanks in advance.
Thanks,
Harsha
Edited by: user498756 on Sep 11, 2008 2:23 AM

...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
Again - I cannot think of a good reason to do so though!
-Bob

Convert 11.1.0.7 EBS 12.1.3 single node to RAC with ASM on 11.2.0.3 cluster

Hi
I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
However when I start the same locally from lsnrctl command listener starts.
trace_OraDb11g_home1-1212159AM174.log
====================================
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
has placement error.
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
.lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
ember `jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
mber `jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
snr' has placement error.
[AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
[AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
JXN-UX-EBS1D1Q.lsnr' has placement error.]
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
The crsctl has details as below:
=====================
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE jxn-ux-ebs2d1q
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.cvu
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
1 ONLINE OFFLINE
ora.jxn-ux-ebs1d1q.vip
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
1 ONLINE OFFLINE
Not sure how to fix this .
Regards
Ram

I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
along with SCAN_LISTENERS

Multiple ASM instances on a single node

Can i have multiple ASM instances on a single node? This is to have each instance supporting different environment dev,stage etc
Thanks
Sannidhi

I had been discussing the same issue with someone from Oracle. I asked for multiple ASMs on a server so that we could have seperate ASMs running for, say, 10g and 11g.
He explained that we should think of ASM as being the same as Veritas FileSystem. We don't run multiple instances of Veritas on our servers. On single Veritas "instance" (set of drivers) provides all the Veritas Fx mountpoints on the server. Similarly, there should be only 1 ASM instance on a server.
(substitute UFS or ZFS or CFS for Veritas in the above example and you still have only 1 filesystem manager on a server providing one type of filesystem, although you could have, say , UFS and Veritas co-exist ; just as you could have Veritas, ASM and Raw co-exist on a server).
Hemant K Chitale
Edited by: Hemant K Chitale on Sep 29, 2009 11:50 AM

BizTalk Mapper - Looping multiple nodes to map to a single node in a single row (flat file)

Hi everybody,
I'm still new in developing BizTalk app and require some help in this one problem. Appreciate your time and input to help me on this.
Basically I have an XML document as input and a flat file as output. Example for input is as per below. The "Contact" node's maxOccurs here is set to unbounded and could be multiple. (phone, fax, website, telex ...)
<root>
<CustomerName>Company A</CustomerName>
<Contact>
<Type>Phone</Type>
<Locator>03566789</Locator>
<Type>Phone</Type>
<Locator>03566790</Locator>
<Type>Fax</Type>
<Locator>03566795</Locator>
<Type>Telex</Type>
<Locator>03566798</Locator>
<Type>Website</Type>
<Locator>www.companyA.com</Locator>
</Contact>
</root>
The expected output in XML would look like below. The final outcome would be a csv file. Strictly Phone 1, phone 2, fax and telex, the rest would be ignored.
<root>
<CustomerName>Company A</CustomerName>
<Phone1>03566789</Phone1>
<Phone2>03566790</Phone2>
<Fax>03566795</Fax>
<Telex>03566798</Telex>
</root>
Example of expected output result (csv file): CompanyName;Phone1;Phone2;Fax;Telex;
In our case here: Company A;03566789;03566790;03566795;03566798;
Another example could be: Company B;036778911;;036778912;; if only 1 phone number and 1 fax number provided.
I've used Table Looping and Table Extractor and nearly got the desired result except that it is represented in multiple rows instead of one: Example:
Company A;03566789;;;
Company A;;03566790;;;
Company A;;;03566795;;
Company A;;;;03566798;
Any idea how to do the mapping? I'm kind of stuck here and it sounds like an easy problem but i could not find any example to the solution that I need here. Table looping and table extractor is ok to map from single node flat file to multiple nodes but not
the reverse like in this example.
rgds,
sportivo

Hi,
Please refer to below links where similar issue has been answered.
http://social.msdn.microsoft.com/Forums/en-US/biztalkgeneral/thread/ecdff241-6795-4a95-bad7-48fca4410dfb
http://www.epinaki.com/2011/05/other-options-to-using-biztalk-table-looping-functoid-par-i/
I hope this helps you.
Thanks With Regards,
Shailesh Kawade
MCTS BizTalk Server
Please Mark This As Answer If This Helps You.
http://shaileshbiztalk.blogspot.com/

EBS11i in single node, could be database in 64 bits?

Similar Messages

Maybe you are looking for