EbTAX define tax rule based on the purchase value

Hi,
I have 2 questions to configure a rule in EBTAX.
1. XXVAT tax only applies if the purchase value is greater than 100 HOL.
In Tax Determining Factor Sets I can't find the options to define this condition.
Where I can define this condition?
2. In ebTax I can define the following rule?
If Purchase value = 1000 HOL
Then:
XVAT12% applies to the first 300 HOL of the purchase
XVAT15% applied to the remaining 700 HOL of the purchase.
Thank you for your help.

Hi,
I have a similar need and would like to see if anyone out there resolved this using ebtax without customizations.
Thanks you all

Similar Messages

What is the FM/BAPI to get the Goods Receipt Based on the Purchase Order

Hi ,
I want FM/BPI to get the Goods Receipt Based on the Purchase Order in MM.
Thnx in advance

Hi
BAPI_GOODSMVT_CREATE
Thanks & Regards
Kishore

Invoice Value tolerances based on the Purchase Order type..

Hi Gurus,
Can anyone please tell me if there is a way to assign the variance (tolerance limit) to the Invoice document based on the Purchase Order? What I want to do is that when the Invoice is posted in the system, the system should be able to check the document type of the Purchase Order and then based on that the tolerance limits should be applied on the Invoice. for example PO document type NB- tolerance for Invoice plus/ minus 10%, Document type FO- tolerance limit plus/minus 5%.
I know we can do it based on the Vendor but we use the same vendors for a number of purposed ( a number of PO types)hence can use that.
Thanks in advance
Anoop

Hi,
Check on it:-
Purchase Order Tolerance
http://wiki.sdn.sap.com/wiki/display/ERPSCM/MM-IV-LIV-CRESetTolerancesforIncoming+Invoice
pherasath

Material Statuses based on the Purchase order Document type

Hi Experts,
We need to maintain the Plant material status based on the purchase order document type.
Example - If I am using NB for normal purchase orders and ZB for STO procurement then, there should be a material status which should give warning message - 'do not use ' for ZB STO purchase orders and it should allow to create NB purchase orders for that same materials.
Please advise what are the possibilities?
Thanks
Regards
MM

Hi Gurus,
Thank you for your reply, Please find my replies below
@@ - Mallinath - We need this restrictions for some type of materials ( with specific Material types) which should not be procured through inter company STO process, buying plant should use the normal purchase. for other Material types they should be able to use the inter company STO process.
@@ DEV - We are already using the Spl. Procurement keys for inter company STO process.
Example - Material type ZXYX should not use the inter company STO process, but it should be allowed all other processes.
Please advise how we can control this process?
Thanks
Regards
Raja

Cannot query AR invoices based on the purchase order number in R 12 1.3

Hi,
We need to query invoices based on the purchase order number, However when we try to Ct+F11 get the message *"Please fill in selective criteria in at least one of the following fields for performance reasons: GL Date, NUmber,Bill to etc."*
Is this a new feature or a bug?
Thanks and Regards,
MPH

Hi All,
I found the solution in the following note.
*How to prevent Blind Query or Query on Non Indexed Column in Transaction, Receipts, Collections forms? [ID 753222.1]*
Thanks and Regards,
MPH

Selectively executing a mapping rule based on a variable value

Hi,
I have written a mapping rule in the following format.
case #time_unit when 'quarter' then
logic1
when 'month' then
logic2
end
In logic1, logic2 i again have nested case statements. Variable time_unit will have a static value hard-coded given (quarter/month) by user before execution.
So Variable time_unit need not be checked for each row that gets transformed. It hits the performance.
I want either logic1 or logic2 to be substituted dynamically in the mapping rule window based on the variable value.
I cannot go for 2 seperate interfaces. How can I achieve this in ODI.
Please help me.
Thanks!!

Sarah,
I'm not aware of doing other than BPM. If you want the BPM Steps, Please refer below
Step 1 : Receive
Step 2 : Transformation
Step 3 : Send (Syncronous call to the target system)
Step 4 : Switch(Check the Payload value as per your reqmt)
Step 5 : Transformation(Switch : False ,If the payload value is not ERROR)
Step 6 : What you wanna do ( Switch :True)
If you want more technically, then let me know the source and target systems, I will help you to design
the complete flow.
Best Regards,
raj.

How to find bpel instance in 11g based on the index values

We have 10g BPEL process where we define 4 index values for all the instances. Whenever support request comes, we ask index values and based on that we search the process instance.
We have migrated this 10g bpel process to 11g now. How to find bpel instance in 11g based on the index values ???

I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

Is there a way to hide some reports based on the selected values in prompt.

Hi Experts,
Is there a way to hide some reports based on the selected values in prompt.
For ex. if a year is selected in the prompt then the report should display year wise report.
If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
Regards
Ashish

Hi,
Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
Use four sections.
Section1-Place report that should come when only year.
section2-Place report that should come for year and halfyear.
Section3-Place report that should come for year,halfyear and qtr.
Section4-Place report that should come for year,halfyear,qtr and month.
Apply guided navigation for each section selecting guided navigation-
For section1-
properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/

How to find bpel instance in 11g based on the index values using Java APIs

Hi ,
In SOA10G we had option to find the instances based on the index value using Java APIs like below.
WhereCondition criteria= new WhereCondition(SQLDefs.CX_index_1 + " = ?");
criteria.setString(1, "indexValue");
Locator mLoc = getLocator();
IInstanceHandle[] foundInstances = mLoc.listInstancesByIndex(criteria);
Please tell me how to achieve the same functionality in SOA 11G using Java APIs
Regards,
Saba

I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???

Hide multiple rows in a dynamic table based on the row value.

Hi,
I need to hide multiple rows in a dynamic table based on the specific value of that row.
I cant find the right expression to do that.
please help

Go to the Row Properties, and in the Visibility tab, you have "Show or hide based on an expression". You can use this to write an expression that resolves to true if the row should be hidden, false otherwise.
Additionally, in the Matrix properties you should take a look at the filters section, perhaps you can achieve what you wish to achieve through there by removing the unnecessary rows instead of just hiding them.
It's only so much I can help you with the limited information. If you require further help, please provide us with more information such as what data are you displaying, what's the criteria to hiding rows, etc...
Regards
Andrew Borg Cardona

Freight Calculation based on the net value of the Line item

Hi SAP Gurus,
I have one requirement for Freight calculation(Sales order is created through an IDOC) :
In the idoc,we will receive a freight dollar amount - which will be the total amount of freight.(example 100)
We will also receive sales dollar for each line item ,which is then passed to the pricing procedure, for a total amount of sales for that Sales order.
(examples below, for a total of 1500)
The 100 is to be posted to a freight G/L account.
The 100 is further divided by each profit center of the materials on the Sales order.
The freight is split out amongst the profit center , based on the net value of the line item.
Freight value to be allocated = Line item value/total value of the sales order * Freight amount.
Total of the sales order =1500
     Line item value     Freight value calculation     Profit center
Material A:      800          800/1500*100 = 53     Profit center A
Material B:     500          500/1500*100 = 33     Profit center B
Material C:      200          200/1500*100 = 13     Profit center C
Please let me know how to achieve this functionality in pricing procedure or what changes i need to make in Freight condition type.
Thanks in advance,
Bhakar Saha

Were you able to resolve this issue of allocating freight costs to line items/profit centers using the net value of the line items?

Dist. of Header Condition based on the material Value

Hi All,
I have one query regarding the header Condition.i have selected the Calculation type as B - fixed amount (mandatory) for a particular Condition type and also selected the header and Item condition indicator.Now if the material have more than one line item then the system distributes this condition based on the quantities in PO.
My client requirement is that they want to have a header condition as we are using now. But they want to distribute this header condition according to the material values for each line items in a PO. please Mention that this condition is a fixed value (mandatory).
So, how can we make a Fixed Value (Calculation type) for a header condition to be distributed among the line items based on the base Value?
Please revert back asap.
Sure, points will be awarded for the same.

as explained earlier ,
system is distributes the header amount on the basic of value calculated by Basic X qty
e.g.
header value =100
two line item
1 is with Rs 4/- and qty is 10
2 is with Rs 10/- and qty is 15
so distribution is
Rs 21.05/- for 1st item
and
Rs 78.94/- for 2ed item
regards,
sujit

Setting the series color of a bi beans graph based on the data values

How do I conditionally set the series color of a bi beans graph based on the data values?
I am using the following code to get the data values and set the series color:
Graph gr=(Graph)CmdrDashboardP1_pres1.getView();
DataAccess da=gr.getGraphModel().getDataAccess();
DataDirector dd=gr.getDataDirector();
DataMap dm=dd.getDataMap();
int re=dd.ROW_EDGE;
int ce=dd.COLUMN_EDGE;
Object val=da.getValue(re,ce,dm.DATA_TYPE);
int seriesCount=da.getEdgeCurrentSlice(DataDirector.ROW_EDGE);
if (val <=45.0)
gr.getSeries().setColor(new Color(255,0,0),seriesCount);
I get a NullPointerException from the line of code "Object val=da.getValue(re,ce,dm.DATA_TYPE)." I have tried the code with DATA_UNFORMATTED as well, but get the same exception. When I print the DataMap value of dm the results are [dataUnformatted, dataViewFormat, value, dataIsTotal, dataType].
Also, I get the error "method <= (java.lang.Object,double) not found in class _CmdrDashboardP1" from the "if (val <=45.0)" code.
Thanks for any assistance

How do I conditionally set the series color of a bi beans graph based on the data values?
I am using the following code to get the data values and set the series color:
Graph gr=(Graph)CmdrDashboardP1_pres1.getView();
DataAccess da=gr.getGraphModel().getDataAccess();
DataDirector dd=gr.getDataDirector();
DataMap dm=dd.getDataMap();
int re=dd.ROW_EDGE;
int ce=dd.COLUMN_EDGE;
Object val=da.getValue(re,ce,dm.DATA_TYPE);
int seriesCount=da.getEdgeCurrentSlice(DataDirector.ROW_EDGE);
if (val <=45.0)
gr.getSeries().setColor(new Color(255,0,0),seriesCount);
I get a NullPointerException from the line of code "Object val=da.getValue(re,ce,dm.DATA_TYPE)." I have tried the code with DATA_UNFORMATTED as well, but get the same exception. When I print the DataMap value of dm the results are [dataUnformatted, dataViewFormat, value, dataIsTotal, dataType].
Also, I get the error "method <= (java.lang.Object,double) not found in class _CmdrDashboardP1" from the "if (val <=45.0)" code.
Thanks for any assistance

How to increase the salary based on the percentage value

Hi All,
Could you please let me know which API need to be used to implement the hike in salary based on the percentage value. And what all the parameters to be used.
Appreciate your help...
Thanks...

Dear All,
Any luck on this please?
thanks..

EbTAX define tax rule based on the purchase value

Similar Messages

Maybe you are looking for