Ebusiness RHEL upgrade from 4 to 5
Our apps tier (forms and apache) resides on RHEL 4. We would like to upgrade to RHEL 5. Is there anything to be done from an application perpective (apart from the O.S rpm dependencies).
for this upgrade?
Thank you
Apart from applying all OS pre-req. software and packages, please make sure you relink the executable files as per the docs referenced in this thread -- Need clarification on Solaris 10 upgrade for E Business suite application
Thanks,
Hussein
Similar Messages
-
Upgrade from ISE 1.1.4 to 1.2 (VMWare)
We are planning to do an upgrade on our ISE runing on VMWare. Our current version is 1.1.4 and we are planning to upgrade it to 1.2. Based on released notes, 1.2 is running on 64-bit and we are currently using 32-bit on our ISE. I have red all releases notes and upgrade guide from Cisco and all doesn't include the upgrade process from 32-bit to 64-bit. I have created the draft for the upgrade plan, here is what I am thinking for the upgrade. Create backup of ISE 1.1.4, install ISE 1.2 to new VMs then restore the databases from 1.4 and from then will upgrade the databases to 1.2.
Hi,
You can run the upgrade stright on, the v1.2 installer takes care of 32 to 64bit conversion.
Edit: You will need to change host OS from RHEL 5 32bit to RHEL 5 64bit.
Is this a stand alone ISE or a depoymentof more then one?
If you have a deployment you can start with your secondary PAN (admin) node. When done the secondary announces that it's v1.2 and when you upgrade the next node, a PSN, it will conect automatically to secondary PAN.
It can be problems when upgrading ISE, but with my latest customer going to 1.2 everything worked as it should.
But I did prepare for the worst with backup of DB, backup of certifiactes + pvk, having access to AD admins etc.
Tip is to copy the upgrade file to the local disk and run upgrade from there and to reset the DB on the PSN nodes to shorten the time of the upgrade.
See this
https://supportforums.cisco.com/community/netpro/security/aaa/blog/2013/07/19/upgrading-to-identity-services-engine-ise-12
See here for more info on depolyment upgrade.
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_011.html
Tarik has a good post about upgrade to 1.2 as well:
https://supportforums.cisco.com/message/4077655?tstart=0#4077655
Cheers
Message was edited by: Mikael -
Does anyone upgrade from 9iAS to 10g?
Dear all,
Does anyone upgrade from 9iAS to 10g only? The EBS version (11.5.8) and the oracle database version (9.2.0.4) are still same.
Best Regards,
AmyYou can upgrade 9i database to 10g in Ebusiness suite using metalink note
Note:362203.1 Oracle E-Business Suite Release 11i with Oracle Database 10g Release 2 (10.2.0)
Note:369693.1 Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2
But for the application server components you can follow
Note:125767.1 Upgrading Developer 6i with Oracle Applications 11i
But Application server itself should be upgraded from 9iAS to 10gAS if you are planning to move your oracle applications Ebusiness suite to release 12.
Check the following metalink note
Note:403339.1 Upgrade R11i to R12
Sami Malik -
We are migrating 120+ Oracle 10gR2 databases (10.2.0.1, 10.2.0.3 & 10.2.0.5) from 30+ physical Linux (RHEL 4.6 & 5) servers to an AIX 6.1 virtualized environment running on two new P770 servers. Our migration approach will be to use Datapump Export and Import as we are moving between platforms and 95% of the databases are 5-10 Gb in size, so long export/import times should not be an issue. We have access to IBM's Xenobridge migration tool, but will try to do most of the work manually to offset the tool's high license cost.
Our server team is in the process of creating our AIX image(s) and we are preparing for the Oracle software installation . My question relates to the Oracle 10gR2 patch level on the new target AIX servers as our client has asked about patching all migrated databases up to 10.2.0.5.
Can I simply install the 10.2.0.1 base software on the AIX server, apply patch 10.2.0.5 and follow-up patch p10248542 before importing?
Is my upgrade approach then to simply export the 10.2.0.1 or 10.2.0.3 databases on Linux using the lower version of the Export utility and import into a copy on the AIX server using the 10.2.0.5 Import utility?
Will the Import utility take care of the upgrade from 10.2.0.1 or 10.2.0.3 to the 10.2.0.5 level?
Do I have to perform a manual upgrade and should there be any outstanding issues specifically related to Daylight Savings Time operability?
Here's my high level plan:
1. Install 10gR2 on AIX server and patch to 10.2.0.5
2. Export 10.2.0.3 database on Linux server using 10.2.0.3 Export utility
3. Use DBCA on Linux server to create "database create" template and transfer this template to AIX server for later use
4. Create "shell" database on AIX using DBCA on AIX server referencing template copied over from the Linux server
5. Import 10.2.0.3 database export into 10.2.0.5 shell database
Just wondering if all the steps in the 10.2.0.5 patchset notes (Readme for 8202632) still apply when using the export/import approach?
All feedback and comments around missing steps would be greatly appreciated.
Thank you,
JeffYour approach is correct - imp/exp (or impdp/expdp) will work. You can ignore the notes in 8202632. I would highly recommend that you perform a test upgrade first to validate, tweak as needed, and perfect your process.
See http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/expimp.htm#i262220
Pl also review MOS Doc (Migration of Oracle Database Instances Across OS Platforms)
HTH
Srini -
Upgrading from Oracle E-Business Suite 10.7 to Oracle E-Business Suite Rele
Hi,
I need some help(Steps) to get start Upgrading from Oracle E-Business Suite 10.7 to Oracle E-Business Suite Release 12.
Please share your experties.
Regards
Anup
Edited by: IndiaDBA on २१ नवंबर, २०१२ १:२० अपराह्नIndiaDBA wrote:
Hi,
I need some help(Steps) to get start Upgrading from Oracle E-Business Suite 10.7 to Oracle E-Business Suite Release 12.
Please share your experties.
Regards
AnupDirect upgrade from 10.x to 12.1.x is not possible.
You have two options here:
Option 1) Upgrade to 11i then to 12.1.x
"Upgrade Assistant Spreadsheet" and "Upgrading Oracle Applications" -- http://docs.oracle.com/cd/B25516_18/current/html/docset.html
11i to R12 Upgrade -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11i+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Option 2) Re-Implementation (install R12 then re-implement)
https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+vs+Re-Implementation&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+vs+Re-Implementation+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein
Reference: Re: Upgrade Ebusiness Suite 10.5 to R12.1 -
I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
-
Is it really possible to upgrade from a Treo 650 to a Treo 750?
I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T) -
I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?
Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314 -
I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H. -
Can't print from IE 8 after upgrading from Vista to Windows 7
My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff -
Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0
Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
ShubhadaSAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH -
Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0
Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
SteffanPublic Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
strFileName = EplanSet!path & EplanSet!File
If AcroAVDoc.Open(strFileName, vbNull) <> True Then
Exit Function
End If
Set AcroAVDoc = AcroApp.GetActiveDoc
Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions! -
Upgrade from R/3 4.6C to ECC 6.00 : languages
Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French for component EA-APPL
- French for component EA-DFPS
- French for component EA-FINSERV
- French for component EA-GLTRADE
- French for component EA-HR
- French for component EA-IPPE
- French for component EA-PS
- French for component EA-RETAIL
- French for component ECC-DIMP
- French for component ERECRUIT
- French for component FI-CA
- French for component FI-CAX
- French for component FINBASIS
- French for component INSURANCE
- French for component IS-CWM
- French for component IS-H
- French for component IS-M
- French for component IS-OIL
- French for component IS-PS-CA
- French for component IS-UT
- French for component LSOFE
- French for component PI_BASIS
- French for component SAP_ABA
- French for component SAP_AP
- French for component SAP_APPL
- French for component SAP_BASIS
- French for component SAP_BW
- French for component SAP_HR
- French for component SEM-BW
- French for component ST-PI
- Dutch for component EA-APPL
- Dutch for component EA-DFPS
- Dutch for component EA-FINSERV
- Dutch for component EA-GLTRADE
- Dutch for component EA-HR
- Dutch for component EA-IPPE
- Dutch for component EA-PS
- Dutch for component EA-RETAIL
- Dutch for component ECC-DIMP
- Dutch for component ERECRUIT
- Dutch for component FI-CA
- Dutch for component FI-CAX
- Dutch for component FINBASIS
- Dutch for component INSURANCE
- Dutch for component IS-CWM
- Dutch for component IS-H
- Dutch for component IS-M
- Dutch for component IS-OIL
- Dutch for component IS-PS-CA
- Dutch for component IS-UT
- Dutch for component LSOFE
- Dutch for component PI_BASIS
- Dutch for component SAP_ABA
- Dutch for component SAP_AP
- Dutch for component SAP_APPL
- Dutch for component SAP_BASIS
- Dutch for component SAP_BW
- Dutch for component SAP_HR
- Dutch for component SEM-BW
- Dutch for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancelHi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel -
I've recently completed a database upgrade from 10.2.0.3 to 11.2.0.1 using the DBUA.
I've since encountered a slowdown when running a script which drops and recreates a series of ~250 tables. The script normally runs in around 19 seconds. After the upgrade, the script requires ~2 minutes to run.
By chance has anyone encountered something similar?
The problem may be related to the behavior of an "after CREATE on schema" trigger which grants select privileges to a role through the use of a dbms_job call; between 10g and the database that was upgraded from 10G to 11g. Currently researching this angle.
I will be using the following table creation DDL for this abbreviated test case:
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA;When calling the above DDL, an "after CREATE on schema" trigger is fired which schedules a job to immediately run to grant select privilege to a role for the table which was just created:
create or replace
trigger select_grant
after CREATE on schema
declare
l_str varchar2(255);
l_job number;
begin
if ( ora_dict_obj_type = 'TABLE' ) then
l_str := 'execute immediate "grant select on ' ||
ora_dict_obj_name ||
' to select_role";';
dbms_job.submit( l_job, replace(l_str,'"','''') );
end if;
end;
{code}
Below I've included data on two separate test runs. The first is on the upgraded database and includes optimizer parameters and an abbreviated TKPROF. I've also, included the offending sys generate SQL which is not issued when the same test is run on a 10g environment that has been set up with a similar test case. The 10g test run's TKPROF is also included below.
The version of the database is 11.2.0.1.
These are the parameters relevant to the optimizer for the test run on the upgraded 11g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.2.0.1
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
optimizer_use_invisible_indexes boolean FALSE
optimizer_use_pending_statistics boolean FALSE
optimizer_use_sql_plan_baselines boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 03-11-2010 16:33
SYSSTATS_INFO DSTOP 03-11-2010 17:03
SYSSTATS_INFO FLAGS 0
SYSSTATS_MAIN CPUSPEEDNW 713.978495
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM 1565.746
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED 2310
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Output from TKPROF on the 11g SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 324
{code}
... large section omitted ...
Here is the performance hit portion of the TKPROF on the 11g SID:
{code}
SQL ID: fsbqktj5vw6n9
Plan Hash: 1443566277
select next_run_date, obj#, run_job, sch_job
from
(select decode(bitand(a.flags, 16384), 0, a.next_run_date,
a.last_enabled_time) next_run_date, a.obj# obj#,
decode(bitand(a.flags, 16384), 0, 0, 1) run_job, a.sch_job sch_job from
(select p.obj# obj#, p.flags flags, p.next_run_date next_run_date,
p.job_status job_status, p.class_oid class_oid, p.last_enabled_time
last_enabled_time, p.instance_id instance_id, 1 sch_job from
sys.scheduler$_job p where bitand(p.job_status, 3) = 1 and
((bitand(p.flags, 134217728 + 268435456) = 0) or
(bitand(p.job_status, 1024) <> 0)) and bitand(p.flags, 4096) = 0 and
p.instance_id is NULL and (p.class_oid is null or (p.class_oid is
not null and p.class_oid in (select b.obj# from sys.scheduler$_class b
where b.affinity is null))) UNION ALL select
q.obj#, q.flags, q.next_run_date, q.job_status, q.class_oid,
q.last_enabled_time, q.instance_id, 1 from sys.scheduler$_lightweight_job
q where bitand(q.job_status, 3) = 1 and ((bitand(q.flags, 134217728 +
268435456) = 0) or (bitand(q.job_status, 1024) <> 0)) and
bitand(q.flags, 4096) = 0 and q.instance_id is NULL and (q.class_oid
is null or (q.class_oid is not null and q.class_oid in (select
c.obj# from sys.scheduler$_class c where
c.affinity is null))) UNION ALL select j.job, 0,
from_tz(cast(j.next_date as timestamp), to_char(systimestamp,'TZH:TZM')
), 1, NULL, from_tz(cast(j.next_date as timestamp),
to_char(systimestamp,'TZH:TZM')), NULL, 0 from sys.job$ j where
(j.field1 is null or j.field1 = 0) and j.this_date is null) a order by
1) where rownum = 1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.47 0.47 0 9384 0 1
total 3 0.48 0.48 0 9384 0 1
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS (recursive depth: 1)
Rows Row Source Operation
1 COUNT STOPKEY (cr=9384 pr=0 pw=0 time=0 us)
1 VIEW (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=6615380 card=194570)
1 SORT ORDER BY STOPKEY (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=11479630 card=194570)
194790 VIEW (cr=9384 pr=0 pw=0 time=537269 us cost=2563 size=11479630 card=194570)
194790 UNION-ALL (cr=9384 pr=0 pw=0 time=439235 us)
231 FILTER (cr=68 pr=0 pw=0 time=920 us)
231 TABLE ACCESS FULL SCHEDULER$_JOB (cr=66 pr=0 pw=0 time=690 us cost=19 size=13157 card=223)
1 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=2 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
1 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
0 FILTER (cr=3 pr=0 pw=0 time=0 us)
0 TABLE ACCESS FULL SCHEDULER$_LIGHTWEIGHT_JOB (cr=3 pr=0 pw=0 time=0 us cost=2 size=95 card=1)
0 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=0 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
0 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=0 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
194559 TABLE ACCESS FULL JOB$ (cr=9313 pr=0 pw=0 time=167294 us cost=2542 size=2529254 card=194558)
{code}
and the totals at the end of the TKPROF on the 11g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 3 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 70 0.00 0.00 0 0 0 0
Execute 85 0.01 0.01 0 62 208 37
Fetch 49 0.48 0.49 0 9490 0 35
total 204 0.51 0.51 0 9552 208 72
Misses in library cache during parse: 5
Misses in library cache during execute: 3
35 user SQL statements in session.
53 internal SQL statements in session.
88 SQL statements in session.
Trace file: 11gSID_ora_17721.trc
Trace file compatibility: 11.1.0.7
Sort options: default
1 session in tracefile.
35 user SQL statements in trace file.
53 internal SQL statements in trace file.
88 SQL statements in trace file.
51 unique SQL statements in trace file.
1590 lines in trace file.
18 elapsed seconds in trace file.
{code}
The version of the database is 10.2.0.3.0.
These are the parameters relevant to the optimizer for the test run on the 10g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.3
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 09-24-2007 11:09
SYSSTATS_INFO DSTOP 09-24-2007 11:09
SYSSTATS_INFO FLAGS 1
SYSSTATS_MAIN CPUSPEEDNW 2110.16949
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Now for the TKPROF of a mirrored test environment running on a 10G SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.01 0.01 0 2 16 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 113
{code}
... large section omitted ...
Totals for the TKPROF on the 10g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.02 0 0 0 0
Execute 1 0.00 0.00 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 0 2 16 0
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 65 0.01 0.01 0 1 32 0
Execute 84 0.04 0.09 20 90 272 35
Fetch 88 0.00 0.10 30 281 0 64
total 237 0.07 0.21 50 372 304 99
Misses in library cache during parse: 38
Misses in library cache during execute: 32
10 user SQL statements in session.
76 internal SQL statements in session.
86 SQL statements in session.
Trace file: 10gSID_ora_32003.trc
Trace file compatibility: 10.01.00
Sort options: default
1 session in tracefile.
10 user SQL statements in trace file.
76 internal SQL statements in trace file.
86 SQL statements in trace file.
43 unique SQL statements in trace file.
949 lines in trace file.
0 elapsed seconds in trace file.
{code}
Edited by: user8598842 on Mar 11, 2010 5:08 PMSo while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table." -
Hi Microsoft,
Since we have upgraded from Exchange 2007 to 2013 users complain their conversations in Outlook are no longer grouped based on the subject of an e-mail. I looks like Outlook uses other message properties for grouping e-mails in a conversation.
I have investigated all the forum topics and see that with exchange 2010 there is support added for the use of conversation-ID's. However the functionality to automatically group e-mails with the same subject in one conversation in Outlook is gone!
I would like to know if there is a fix to implement so that some our users get this functionality back. For Example: Let the exchange server not generate conversation-ID's and message-ID's for certain users.
Your help is greatly appreciated!Totally correct!
If you don't plan to maintain Outlook then you plan to fail :(
Additional links etc are in here:
http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Maybe you are looking for
-
How do I tweak Snow Leopard (Finder & Safari) to make it behave more like Tiger?
I've recently upgraded to a Mac Pro 4,1 from a Power Mac G4, and to Mac OS X 10.6.8 from 10.4.11 in the process. There are a few little ways in which Snow Leopard behaves differently to Tiger, and I'm wondering if (for each item on the list below) an
-
What are the avlble methods to Measure Quality of Customer Service in SAP
Hi We are in Retail business, and I would like to know what are the available methods to measure the Quality of Customer service in SAP CRM. Help us to get the required information? Best regards
-
IDOC-XI-Idoc error in inbound idoc
Hi all. We have a Idoc-xi-idoc scenario. SAP R/3 - Xi - SAP CRM We have configure the idoc out in SAP R/3. And I use we19 to test the Orders Idoc and check the staus is ok. But in XI, I cannot see the Orders Idoc is sending in. However, t
-
Adobe Acrobat PDF erstellen aus Datei = keine Leserechte
Hallo, Acrobat meldet mir (Win7 + Office 2010) & einem Kollegen (Win XP +Office 2010 pro) seit neustem beim Erstellen (Acrobat öffnen und dann von PDF erstellen aus Datei) den Fehler, dass ich keine Leserechte habe, um die Datei zu öffnen. Egal ob di
-
Wait time. Who waits who?
I saw a query in OEM Top SQL that take 31.75 Activity%, 31.03 CPU% and 30.45 Wait%. I understand the CPU%, and guess the Activity% is of the server activity. But what is exactly the Wait%. Is it the percentage of the total server processes wait for t