EC-CS -Error G00022 while integrating Cons Units and Company in CXNT
Hi,
The question is related to EC-CS ( Enterprise controlling - Consolidation.)
While integrating the Consolidation units with Company in t code CXNT, the system gives an error message as below:
Default value to char. Partner unit does not exist for value CO from char. Dimension
Message no. G00022
Diagnosis
Default values must be maintained for the characteristic Partner unit. Numerous consolidation functions use this default value.
The characteristic Partner unit is in a compounding relationship with the characteristic Dimension and is dependent on its characteristic value. For the value CO of the independent characteristic Dimension no default value is maintained.
Procedure
Maintain for every value of the independent characteristic Dimension a default value for the characteristic Partner unit.
I don't understand the configuration missing for the above eror. Any help is appreciated.
Njoy
Siva
Hi,
We need to maintain the default values in transaction - CXOAA.
The issue is solved.
Njoy
Siva
Similar Messages
-
Iphone 5 cant be restored, it shows unknown error -1 while trying to restore and it only display connect to Itune
Greetings ayokunlefromlos angeles,
Welcome to the Apple Support Communities!
I understand that when attempting to restore your iPhone you receive an error and your iPhone shows the Connect to iTunes screen. To begin troubleshooting, I would suggest manually placing your iPhone in recovery mode and attempting the restore. Please follow the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Joe -
Portal Runtime error occured while integrating WebDynpro App
Hi all,
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///webdynpro/dispatcher/local/Example_FL/ExampleFLApp' is not valid! Please check the protocol and host entries for system 'SAP_R3'..
See the details for the exception ID in the log file
This is the error that I got while integrating WD appl into Portal. I have Created a Folder in Content Administrator->Niew iView->com.sap.portal.appintegrator.sap
then selected Webdynpro.
Followed by created an iView by selecting appropriate settings. What went wrong. But the WD appl is working fine individually. Please help me
regards,
GaneshHi Ganesh,
It seems that you are unable to see webdynpro application into portal for this you need to create webdynpro system and then create webdynpro iview from portals which required parameters like
1) system : which is webdynpro system
2) webdynpro namespace : local/yourtestproject
3) application name : name of the webdynpro application
I am attaching link for your reference.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3e36d690-0201-0010-cd99-bfbb81bd33d9
Regards,
Hemant
Award points if helpful. -
Runtime error occured while integrating WD appl into Portal?!@#
Hi all,
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///webdynpro/dispatcher/local/Example_FL/ExampleFLApp' is not valid! Please check the protocol and host entries for system 'SAP_R3'..
See the details for the exception ID in the log file
This is the error that I got while integrating WD appl into Portal. I have Created a Folder in Content Administrator->Niew iView->com.sap.portal.appintegrator.sap
then selected Webdynpro.
Followed by created an iView by selecting appropriate settings. What went wrong. But the WD appl is working fine individually. Please help me
regards,
GaneshHi,
Have you create IView properly?.
Here is the step-by-step procedure to create a web dynpro iView in portal:
1. Logon to portal.
2. Content Administration->Portal Content.
3. Right Click on the folder 'Portal Content'.
4. Select 'iView' ->'New'
5. In the Template Selection, select 'SAP Web Dynpro iView' and click 'Next'
6. In the 2nd step, Give iView Name and iView ID and a prefix. Next.
7. Select application variant, say, 'Java' in the 3rd step. Next.
8. In the 4th step, select the System (Your WAS System), give the project name of your webdynpro, like, local/ABC_Project in the WebDynproNameSpace. In the Application Name, enter the application name of your Web Dynpro Application, say ABC_App. Next.
9. Finish.
10. In the left panel, now you will see an iView has been created.
11. Create necessary role/workset and assign this iView for an user.
Hope this helps.
Kind Regards,
S.Saravanan. -
HT1725 I got "error=-36" while downloading a movie, and now I can't get it to resume
I got the error 36 while downloading a movie that I purchased. However, I had to pause it as I was downloading another movie and wanted that one to download a little quicker. Initially, I got error-50 and so I followed the instructions from that feed such as go to Itunes>preferences>restore cache and then restarted my computer (macbook pro) and restarted itunes. Now, I get error-36 and the movie still won't download. According to my account in the itunes store, it's already downloaded. I looked in Music>Itunes Library>Movies and it's not even there....so now what do I do???
Thanks for any helpI had the exact same problem...i just deleted the download and re-downloaded it...seemed to have solved the issue
-
Error count based on business unit and Vehicle type
Hi,
i have a custom error idoc table which contains idoc no, business unit, vehicle type and error message.
Now here my requirement is to display the total count(Error count) of each message based on business unit and
Vehicle type and display it in the output list as shown below. what is the best way to achieve this as there will be number(atleast 6) of error messages available for a business unit based on vehicle type and there are around 15 business units overall for which i should display the error count.
buisness unit| Vehicle Type | Status | Error message | Error count
71320 WT10 51 Organizational channel missing 10
WT10 51 SMC Missing | 15
72000 WT20 51 Creation of vehicle not possible| 12
WT20 51 Status change not requested | 10
regards,
ManiHi,
Assign business unit level read access to your entity for which you have written the Report.
Assign the respective business unit to the user, in your case assign business unit Partner to user Partner
and business unit Manager to user Manager
Also use filtered view in your report if it is SSRS report.
Regards
Ayaz -
Error 10218 while integrating scom 2012 r2 with scvmm 2012 r2
hello,
We are working to integrate the SCOM 2012 R2 With SCVMM 2012 R2 .But while creating connection of integration it got failed with error in job on scvmm as below :
Error (10218)
Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The VMM Management Packs cannot be deployed unless the following component management
packs are present in Operations Manager :
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
Recommended Action
To provide the missing component management packs, ensure that the following management packs have been imported into Operations Manager server:
Microsoft Windows Server 2003 Internet Information Services Management Pack for OpsMgr 2012 (version 6.0.6278.0 or later)
Microsoft SQL Server 2005 Management Pack(version 6.0.5000.0 or later)
You can download the management packs from the System Center Operations Manager Catalog at http://go.microsoft.com/fwlink/?LinkId=86411
Reference link used :- http://technet.microsoft.com/en-us/library/hh882396.aspx ,We have imported all the required MPs as mention in above link on scom.
Regards
Richa KMHave you imported all of the packs it mentions:
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
There's a good walkthrough
here which details all the pre-reqs.
It was some time ago but i also did a walk-through with pictures
http://myopsmgrblog.wordpress.com/2013/04/23/scom-integration-with-scvmm/
Hope this helps -
Error while integrating with Kerberos and AD
Hi,
Implementing Kerberos as the Desktop Single Signon Solution
Environment : Peoplesoft
OS : Redhat Linux
webserver: Weblogic 10.3.4
appserver : tuxedo 10gr3
While doing this implementation I was able to complete it successfully with the JDK linux has provided(1.6.0_22). However the weblogic comes preconfigured with jrockit jdk version1.6.0_24-R28.1.3-4.0.1. When I start the weblogic with jrockit jdk as java_home I am getting the following error.
<Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: com.peoplesoft.pt.desktopsso.kerberos.KerberosSSOFilter.
java.lang.IllegalArgumentException: No Configuration was registered that can handle the configuration named krbServer
at com.bea.common.security.jdkutils.JAASConfiguration.getAppConfigurationEntry(JAASConfiguration.java:130)
at javax.security.auth.login.LoginContext.init(LoginContext.java:243)
at javax.security.auth.login.LoginContext.<init>(LoginContext.java:334)
at com.peoplesoft.pt.desktopsso.kerberos.KerberosSSOFilter.init(KerberosSSOFilter.java:142)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:332)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:98)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:59)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
these are my runtime parameters
java -jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=krbLogin.conf -Dsun.security.krb5.debug=true -Djavax.security.auth.useSubjectCredsOnly=false -Dweblogic.Chunksize=65536 -Djava.util.logging.config.file=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/logging.properties -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Dweblogic.Name=PIA -Dps_vault=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/psvault -Djavax.net.ssl.trustStore=/u01/app/psoft89/webserv/PREFRESH/piaconfig/keystore/pskey -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=/u01/app/psoft89/weblogic/wlserver_10.3/server/lib/weblogic.policy -Dssl.debug=false -Dps_home=/u01/app/psoft89 weblogic.Server
The files krb5.conf and krbLogin.conf exists and have full access.
With the error above it seems that it is not able to pick the configuration file. But just by changing the JAVA_HOME to /usr/java/jdk1.6_022 it starts working.
I have raised this concern with Oracle almost a month before, but still haven't got any reply from them.
Please help.
Thanks and Regards
Anirudha SinghHi Faisal,
Thanks for your reply.
Yes I have given the complete path too.
This is the full command line of the weblogic server. I had modifed it to test if it is trying to pick it up from any default location.
java -jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=/etc/krbLogin.conf -Dsun.security.krb5.debug=true -Djavax.security.auth.useSubjectCredsOnly=false -Dweblogic.security.enableNegotiate=true -Dweblogic.Chunksize=65536 -Djava.util.logging.config.file=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/logging.properties -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Dweblogic.Name=PIA -Dps_vault=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/psvault -Djavax.net.ssl.trustStore=/u01/app/psoft89/webserv/PREFRESH/piaconfig/keystore/pskey -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=/u01/app/psoft89/weblogic/wlserver_10.3/server/lib/weblogic.policy -Dssl.debug=false -Dps_home=/u01/app/psoft89 weblogic.Server
The file is located in /etc folder and has 777 permissions.
Thanks and Regards
Anirudha Singh -
I get an error message while setting up FaceTime and imessage
help!! I keep getting the message "an error has occurred while verifying your email" every time I try to set up Imessgae or FaceTime on my IPad.
Look here for help.
If you have difficulty activating FaceTime or iMessage - Apple Support -
Exact error message as follows:
There was a problem installing Premiere Pro 2014.... Installation failed. Installation encountered an error. Please restart system and try again (15) Exit code 15 0 fatal 1 error. Error: media DB : 12Thank your for your reply. I am running windows 8.1. And there is a huge mess going on. I was on with Adobe tech support all morning and they cannot get photoshop, premiere to update. Then they tried to uninstall, and it would not uninstall. They renamed the directories and did a direct reinstall and it failed. They changed permissions on directories. There are no viruses or malware. I run cccleaner, pcmatic and scan all the time. This process also corrupted my purchased licensed version of Fireworks CS6. Now I cannot even get that to install. We have run the cleaner over and over. So finally I manually cleaned the registry of selected Adobe products and removed everything from the hard drive. I am now running scans because they had me disable my pc matic and windows firewall temporarily while they worked on my pc. I am a graphic designer and I have a project in the waiting. I need to have fireworks, flash photoshop and premiere working but I don't think this is possible.
-
SRM-PI Integration for Supplier and Company Replication ( EBP-SUS Scenario)
Dear Experts,
We are doing a scenario where we are trying to replicate the Company and the Vendors from EBP to SUS via tcode-
BBP_SP_COMP_INI and BBP_SP_SUPP_INI.
When we are doing this in EBP , at SLG1 it is showing the replication done successfully. I have also checked in EBP - SXI_MONITOR the corresponding XML messages has been successfully generated and the respective proxies are called.
But these messages are failing in XI.
In XI the corresponding service interfaces are used -
from EBP (outbound) - SupplierPortalTradingPartner_CreateOrChange_Out http://sap.com/xi/EBP
to SUS (Inbound)- SupplierPortalTradingPartner_CreateOrChange_In http://sap.com/xi/SRM/SupplierEnablement
corresponding interface mapping used- EBP40Partner2SRM40Partner http://sap.com/xi/SRM/SupplierEnablement/Global/IC
corresponding message mapping used - EBP40Partner2SRM40Partner http://sap.com/xi/SRM/SupplierEnablement/Global/IC
data type used TradingPartnerCreateOrChangeInternalOut http://sap.com/xi/EBP
We are doing this scenario from SAP Pre-delivered standard content -
Service_Procurement_SupplierEnablement
in XI the inbound message is failing at mapping step, it is showing the below error-
Cannot produce target element /ns1:SupplierPortalTradingPartner/Method. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
I have also tried to test the mapping in test tab with the same payload but it showing the same error, even if I try it with a blank payload error remains same.
below is the error I got-
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_EBP40Partner2SRM40Partner_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_EBP40Partner2SRM40Partner_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Trace -
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:SupplierPortalTradingPartner/Method. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:420) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:118) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep
I have gone through this thread SRM-SUS Scenerio Replicating company code and suppliers to SUS via XI
but I think we can not change this interfaces as mentioned here as we are using standard SAP content.
Any help would be very much appreciated.
Thanks
SUgata B MajumderHi All,
I have resolved the issue.
it was a cache problem. I have changed the map, just edited description and activated the map. Though it was a SAP standard Map. I have made the objects as modifiable from SWCV and all the messages are processed.
Thanks -
Dear Team,
I am facing problem while creating Cons Unit Hierarchy. It through the below mention message
Hierarchy R1 has more than one root node
Message no. UGMD304
Diagnosis
You defined hierarchy R1 with multiple root nodes. However, the
hierarchy-defining characteristic only allows one root node per
hierarchy.
System Response
Processing terminated
Procedure
Correct the hierarchy definition.
Can u pls let me now how to overcome from this
MadhuI'm getting a feeling of deja vu here
Cons Unit Hierarchy -
So I bought a Powerbook G4 from a pawn shop and yes, I did check to see if it was still good. everything works fine but I need an update because I have OS X 10.3. So I connect to the internet and then I click on ''Software Update'' and I wait. But then a message opens saying ''An error occurred while checking for updates'' And I don't know why. HELP!!!
Something temporarily wrong with your internet connection?
Be aware that this is a very large file to download, it needs a strong consistent internet connection.
Have the iPhone on the charger cable too.
In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware). -
An error occurred while ready from devices
I am using windows vista and trying to sync up to my pc. When I try to sync up, I get the message that an error occurred while reading from device and an error occurred while writing to the device. I have two iPods. One iPod had a restore done to it. One iPod is brand new. Both iPods can download apps through the internet without any problems.
You may find this article of assistance:
http://pondini.org/OSX/Setup.html
Ciao. -
Error 1004 while updating Apps
I am getting the Error 1004 while trying to download and update Apps from App Store. Does anyone know about this?? Need help urgently.
Thanks in advance.Try the 'solutions' mentioned from this post onwards and see if any work for you : https://discussions.apple.com/message/15652754#15652754 - different things appear to have worked for different people. Though this one appears to have worked for a few people on that thread :
This actually has a very simple fix, that has worked all the times I have seen it. Simple goto Settings > Safari > Then reset the cookies, Reset the Cache, and Reset the History. Now turn the iPad off and then on again. It should work fine now.
Maybe you are looking for
-
how do you double space in Pages 08 and how do you do 1-inch margins?
-
Macbook Pro: both external screens go off when unplugging power cord
Hello! I have my Macbook Pro set up with two external screens one connected thru HDMI and the other with Thunderbolt, I keep the lid always closed. I always have the power cord plugged in but when I for whatever reason unplug the cord both screens go
-
I recently changed my router. I got all the other devices to work but not my printer. Sometimes it works and other times not. Any ideas? At the moment, it says it is not connected but yet it printed just a few days ago.
-
Hi experts, We are using SRM 7.0 with Extended Classic Scenario. We have a number of requirements related to closing a PO and to cancelling a PO. 1) Closing a PO means closing the possibility of further goods receipts and invoices related to this PO.
-
System date in file name for Sender Configuration
Hi all, I need to retrieve some files every day from my source directory, using the system date as a mask for the filename. Is it possible to do any kind of dynamic configuration for Sender Adapter? I only need to read the files with the current syst