Ecatt error during IP04 run

Dear All,
I am finding one error in running the Esecatt
I have created template for creating Maintenance item for t code Ip04 ,By Secatt
I have created template as per std procedure in secatt
Like first creation of test script then creating test configuration
after creating the template we have entered the data
Now following error is giving while creating the secatt
Error in ecatt command TCD IP04
EIP328 Enter an order type
but we have already entered the order type as GPM (Generated prevetivte maint order type)
what could be the reason
Regards
chand

Dear all
It was an Data error
thanks
chand

Similar Messages

Error during payment run in F111

Hi all,
Just wanna ask you regarding error during payment run in F111.
Currently we are doing something in FI in order to support BCS requirement; which all the financial posting that involved balance sheet account must be fill up or having the mandatory profit center. For this purpose, we are creating new validation which will be activated starting 1.1.2011, and currently we are doing the testing on all modules including CFM.
For this purpose, we already identify those balance sheet account that now having blank profit center and ask user to give the default value for it, for us to config it in a FAGL3KEH table.
For those balance sheet account that need to pass the validation (in case user need more time to think of the default value), we already create one set ID to exclude those balance sheet accounts.
In CFM, i already created one bank to bank transaction (bank transfer) for this testing. Example: Company A (GL acct 58010120) >> Company B (GL acct 58010140)
When looked into FAGL3KEH, the only default value 58010120 and the rest of it (58010121, 58010122, 58010140, 58010141, 58010142) being inserted in the set ID. Supposed when i do the payment run at F111, system should passed the posting, but there is an error stated 'Balancing field "Profit Center" in line item 001 not filled'. When ask to one of my colleague, he said that this is due to the CFM's config, not the validation. Can you help me? I don't know where to check as i believe the config for bank to bank transfer is simple and should be no problem. Is there any suggestion??
Thanks.

Hi,
This is not a config in CFM. It is a config of New GL. In new GL configuration, under GL Accounting -- business transaction -- Document splitting -- Define Document splitting characteristics. In this check whether the profit center is specified as a zero balance field and also a mandatory field. It must be based on business requirement so you need to specify a profit center by means of any linkage to cost center or through default account assignments.
Regards,
Ravi

Error during costing run(CK40n)

Dears
During costing run (ck40n),we got following errors,
1)Consumption account cannot be determined
2)Costing items for material R150 in plant EZP1 without cost element
3)Cost component split costed with value of Zero.
Can anyone tell what rectification has to be done ?
Regards
Akshay

1)Consumption account cannot be determined - Please see that consumption GL account for the raw material valuation class is assigned in OBYC..
If you doub le click on the message it gives the combination of
transaction/Controlling area/Valuation class/account modifier... for which you need to assign a consumotion account in transaction OBYC.
2)Costing items for material R150 in plant EZP1 without cost element - Please doubkle click on give the description of the message...this may be due to one of the primery cost element is not created as GL a/c or visaversa.
3)Cost component split costed with value of Zero.--if you solve the above this message will disapper.
pl come back

Portal Runtime Error during first run of NWSneakPreviewSP16

Hi there!
I'm new to SAP and have the following problem while using the NWSneakPreviewSP16 for Java:
Login to portal is successful.
Header loads correctly.
Content page yields an error:
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Komponentenname : com.sap.portal.layouts.framework.WAandNavPanel
I searched the forums and found the location of the log files. The error there is:
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: Error occurs during the compilation of java generated from the jsp
     at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:109)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
     ... 45 more
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2189)
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:81)
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:140)
     at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:284)
     at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:134)
     ... 48 more
Can anyone help?
Thanks in advance,
Robert
Message was edited by:
        Robert Rodewald
Message was edited by:
        Robert Rodewald

Hi Jin,
I think SAP note number 796540 will be helpfull to you.
It was known User Management issue which is not connected to any Unification feature.
Personal advice: try to restart Portal server.
Regards,
Julia

"Error 13 writing data in step 6: type mismatch" - Error during package run

Hi experts,
I am using SAP BPC 7.0 M and facing an issue while importing a package. I am encountering the error : "Error 13 writing data in step 6: type mismatch". The package is running successfully for some files but is failing for similar other files. The data is uploading successfully on server but still it is giving an error while conversion.
Thanks,
Regards,
Kamya Nagpal

Hi All,
In continuation to the above message:
Even when the package is failing, the data is getting uploaded in the server.
Thanks,
Regards,
Kamya Nagpal
Infosys Technologies Limited

Error during repeat run for depreciation via tcode AFAB

hi,
I have removed year-end closing for assets to year 1999 via tcode OAAQ . However, once i want to run repeat depreciation via tcode AFAB, I received error messages as follows:-
1. Field Cost Ctr is a required field for G/L account 4300000
2. Account 'Expense account for ordinary depreciation' could not be found.
Appreciate your advise to solve the errors.
Thanks a lot!
Hi,
Appreciate anyone to help me on this issue.
Edited by: MOHD. FAIZAL OMAR on May 15, 2008 4:38 AM

Hi,
The ERP Financials forum would be more appropriate for this topic.
SAP ERP Financials
-Paul

Error during repeat run depreciation via tcode AFAB

hi,
I have removed year-end closing for assets to year 1999 via tcode OAAQ . However, once i want to run repeat depreciation via tcode AFAB, I received error messages as follows:-
1. Field Cost Ctr is a required field for G/L account 4300000
2. Account 'Expense account for ordinary depreciation' could not be found.
Appreciate your advise to solve the errors.
Thanks a lot!

Dear Mohd.,
PLease check the following in ur configuration:
1) You must have CO implemented. That is why when u run, AFAB system posts its depreciation in cost center mentioned in asset master. Now do one thing, take out the list of assets where cost center is not attached. Take out this info from ANLZ table.
2) Go to AO90 & check the account assignment to all the account determinations.
Try executing after this. It will work.
Regards,
Ajay

Error during Depreciation Run

Hello Experts
While running the depreication run through T.Code AFAB, i am being facing the folliwing error
Error when creating line items using line item schema SAP_500_001...
Message no. AA548
Diagnosis
The system found inconsistencies in the structure of the FI document line items. Line item schema SAP_500_001 does not provide reliable results in relation to posting to the general ledger.
Procedure
Check line item schema SAP_500_001 for this posting transaction. There are two possible causes for the error:
1. A value field was updated on the asset, and this value field is updated to a reconciliation account in FI (for example, an asset balance sheet account, accumulated depreciation or down payments), but there is no line item defined for this value field in the line item schema.
2. The error message can also be caused by incorrect account allocation. In order to find out if you have incorrect account allocations in the account determination for Asset Accounting, carry out a consistency check of the accounts. The consistency check is part of FI-AA Customizing.
Kindly suggest what needs to be done
Regards
Anil

locked.
First of all, search. This same error message was reported earlier.
Second, look at the error and follow the instructions. Did you run the consistency check report?
Third, search OSS. I just found 12 notes related to this error.

Error during MRP run for a Material : Calendar date

Hello All,
I am trying to run MRP for a material and it is not creating Purchase Requisition. It is giving an error that says " 08/10/2003 date lies before start of factory calendar. (Please correct)"
The MRP is set up in such a way that we have a special procurement key pointing to another plant. So we are expecting it to create a Purchase Requistion on that plant but it is not doing so.
I am not expecting a change of dates in the calendar.
Please let me know what the issue would be and where can I correct it.
Thanks
Regards
SAP Fans...

MRP will create a requisition in your plant to procure from the plant that is mentioned in the special procurement key.
The second best solution is to maintain a calendar for this past old year 2003 in your system by using transaction SCAL.
But why would you need a requisition for a time 6 years back? Ever thought about this?
You must have a production order or sales order with a wrong delivery date or replenishment lead time in your system. Because of that the MRP run calculates an expected delivery date for the requisition item that far in the past.

Function Module does not exist error during query run time.

Hi,
During the execution of one of our queries we get the error "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.
Now, this InfoObject is used in the query as a filter to restrict on certain values.
I searched in SE37 and no such function exists.
Let me know if you have any suggestions/resolutions to this issue.
Thanks,
AR.

even if the question is quite old already, maybe some other people need the answer to this, too:
In our case this error which Sudhir Anandarao describes meant, that there was no data found for given input. This is quite strange, but definitly was the source as I dont get the error if something is found by the query. The Query, InfoObject were correct, just the data asked for was wrong (like get me all ID's greater than 5, if there are only ID's smaller or equal 5 it would state "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.")

ORA-00942 Error during unicode export of BI 7.0

Hello Everyone,
I am doing an export of a non-unicode BI 7.0 system to convert and import it into a Unicode database. All the jobs have passed except one and I see the following error in the log file (SAPAPPL0_3.log)
/usr/sap/ABD/SYS/exe/run/R3load: START OF LOG: 20080302124247
/usr/sap/ABD/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/ABD/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Jun 9 2007 09:20:06
/usr/sap/ABD/SYS/exe/run/R3load -e SAPAPPL0_3.cmd -datacodepage 4102 -l SAPAPPL0_3.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) WARN: UMGCONTAINER has 1 problems.
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1100
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: active, by default
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(GSI) INFO: dbname   = "ABD20070922100908
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ussbbdd5                                                        "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "ussbbdd5"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno   = "INITIAL   "
(EXP) ERROR: DbSlExeRead failed
rc = 103, table "/BIC/SZTERR_CD"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
/usr/sap/ABD/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/ABD/SYS/exe/run/R3load: END OF LOG: 20080302124251
When I run the following command on /BIC/SZTERR_CD, I do not get any table information back. I am not sure how to fix it though.
SELECT * FROM DBA_OBJECTS WHERE OBJECT_NAME = '/BIC/SZTERR_CD ';
I did finish all the unicode preconversion steps and also ran the SMIGR_CREATE_DDL program. I had exported recently from the same system but I never got this error during that run.
Another question is about the order in which the steps need to be performed. I completed the preconversion steps, then ran the SMIGR_CREATE_DDL program before proceeding to the export phase. Is this right or does it not matter?
Thanks again for your help!

Hello Stacy,
> When I run the following command on /BIC/SZTERR_CD, I do not get any table information back. I am not sure how to fix it though.
> SELECT * FROM DBA_OBJECTS WHERE OBJECT_NAME = '/BIC/SZTERR_CD ';
If the object does not exists on the source target database, please check if the ddic of sap still contains the table definition. (SE11 or SE14)
If yes you can set the status of the table /BIC/SZTERR_CD to "ok" in the corresponding task file.
You can not fix this problem in other way after you have started the conversion, because of the export files are already generated (with the information of the sap ddic)...
> I completed the preconversion steps, then ran the SMIGR_CREATE_DDL program before proceeding to the export phase. Is this right or does it not matter?
That was the right way.
Regards
Stefan

Profitability Segment Required during depreciation run

Hi,
I'm encountering an error during depreciation run since we set the fields selection for depreciation accounts to require for profitability segment. The reason we require for profitability segment is in order for all postings to generate COPA document.
Is there other way to transfer depreciation postings to COPA? We couldn't generate COPA documents for these postings right now.
Please guide.
Thanks.

Hi,
Generally depreciation expenses are assigned to the cost center. Configurations are maintained in ACSET tcode... Here no option to maintain COPA Segment as cost object.
On first hand, u will post depreciation to the cost center and then as I said earlier u do the cost center-copa assessment.
When u create the copa assessment cycle, u should be clear on which basis(Receiving tracing Value field i.e. either based on sales value, or based on someother value field) u want to assess the depreciation to the selected characteristics say..comapny code, cost center, plant.
Ofcourse, prerequisites is to have assessment cost element and Transfer structure.
U need to see the receivers the moment u click "Receiver Weighting Factor" Tab in u r cycle-segment defintion. If u dont get any receivers, try changing u r selection in the earlier tabs. Once u get the values here, it will surely create copa document.
Regards
Sudhakar Reddy

HAL & XML error during compilation

Hi, I'm new to this so I hope that the question is not out of place. I'm using HAL to generate XML files. Whithin HAL, I pass some info to the XML adapter which when when the XML file is created, the new info is included in the xml file. I do get this error during a run however. Any ideas would be greatly appreciated. Compiler error: Unable to analyze the flow diagram for compilation. Flow diagram-->> Flow Diagram1 Analysis error: [Error: 1001] No matching generator found for the collector: Adapter reference-->> Template.XML/BATCH_JOB_OBJECT \ Collect Elements Compiler error: Compilation succeeded but no code was generated. Flow diagram-->> Flow Diagram1 Internal Vignette Business Integration Studio Error: Compile failed. 0 Warnings 1 Errors Error: Flow Diagram1 : The adapter's implementation cannot be made up to date. Build adapter process aborted due to errors. 0 Warnings 2 Errors 

Hi there,
Thanks a lot.How do I tranfer duke dollars to u.

Error during scheduling while running Run order sequencing in PPR

Hello Experts,
An error saying 'Error during scheduling' is logged while running Run order sequencing in Production Planning Run and the job is failed.
Checked the capacity of the resource but seems ok.
The below long text is displayed next to the error message.
Error during scheduling
Message no. /SAPAPO/OM043
Diagnosis
The system could not schedule an order, operation or activity.
This could have the following causes:
The resource does not have any free working time or capacity.
If you have set planning direction backwards in the strategy profile:
There is not enough working time or capacity available for scheduling between now and the scheduling date.
If you have set planning direction forwards in the strategy profile:
There is not enough working time or capacity available for scheduling between the scheduling date and the end of the planning area.
If you plan characteristics-dependently:
You have assigned characteristics to operations of the order that do not agree with characteristics of the resources on which the operations are to be processed.
The system cannot find any suitable characteristics on the resources and so it cannot schedule.
Procedure
Depending on which of the above reasons is the cause, change the following settings:
Change the working times and capacities of the resources.
Set the planning mode "infinite planning" in the strategy profile.
Activate the planning direction forwards or backwards and reverse in the strategy profile.
Change the characteristics that you have assigned to the resource.
Can anyone let me know what else need to check to avoid the error.

Dear Maddy,
The function "Reschedule" follows an all-or-nothing logic, which means that either all selected activities on a resource can be re-scheduled or the function (better the liveCache) cancels and no activities will be re-scheduled.
One reason might be that you have a pegging relation to a fixed activity (this might be a sales order, forecast, an activity outside the propagation range...) which cannot be considered during the
scheduling. The liveCache cannot break the pegging, therefore it cancels the scheduling.
Please have a look at the note 510669 which offers a heuristic on the basis of the algorithm /SAPAPO/HEUR_PLAN_SEQ_PACKAGES. This heuristic should solve your problem. It will re-schedule as many activities as possible and will not cancel if one fails.
Depending on your current release there could be also some correction notes like
1272960
1027194
I hope I could help you further.
Regards,
Tibor

Travel Expense - Posting run error - Error during creation of posting run

Hi Guru's,
Look forward for your insights. Here you go with my question.
We are implementing Expense Mgt with Portal with out scope for payroll in SAP. I have set up Expense type, WT, Symbolic A/c to G/L Accounts. Im performing Unit testing currently.
Created Expense trip in ESS, from R/3 tcode PRAP, have approved trip, and settled through Tcode - PREC.
When I try to create posting run under transfer to accounting, I get following error
Error during creation of posting run number (->PR1
Message no. 56840
I'm not sure why this error was popping up. Appreciate your suggestion.
Regards
Praveen.N

Hi,
Since you are trying to make payment through FI, you need to maintain ur employee as Vendor. You can do it through PRAA.
So while creating posting run for this trip, it checks if the respective Vendor for this employee is maintained or not.
Pls maintain it as vendor and see if the errors are still coming.
Rakesh

Ecatt error during IP04 run

Similar Messages

Maybe you are looking for