Ecatt Error in Control
Hi,
I have created an script which was running fine. but one day it started giving error " Error in Control" for SAPGUI and ATT377 Control data is obsolete in case of TCD recording.
Please give me some solution and save my life.
Thanks
Poonam
This is not answered but it may assist in pointing you in the direction you need.
CATT ECC6.0 Control data is obsolete
Regards,
Zecher
Similar Messages
-
Hey,
I recorded a test script which involved recording of some values in GridView Control. I was using SAPGUI(record). The recording went fine but as i executed the test case it resulted in an error saying ..
Error in eCATT function SAPGUI
Error in Control
The error is pointing to the screen where it has to start entering values in the grid. The execution stops there and gives me the error as stated above.
I am Using Solution Manager 3.2 with Web AS 6.20 to run eCATT. My SAP GUI is 6.40 with Patch level 8. Is there any limitations as such on Grid Control or some setting which might be missing. Please help me out ASAP.
Regards,
Bilal NazirHey Sasmita,
Well I did a lot of research on it on my own and created quite a number of test cases and was finally able to deduce what actually the problem is.
This problem occured to me when the visibility of the controls especially Grids was dependent on the input data. Usually what happened was that upon recording the follow of screens that actually occured was not happening upon Replay. It was basically because of the state the screen is in when we leave a transaction. I changed the setting to "Do not Close Session upon Completion" so that i had the replay session available to me at the end or Replay. And i saw that the screen was not at the state that it should be. So what I did was changed the screen state on to which it should be at that time and then left the transaction. Now when i Replayed the test case next time it executed perfectly without any errors.
So basically the problem lies within just the dynamic controls and what we have to ensure is that before we replay the script we exit that transaction from a state which we want it to be in upon replay.
Regards,
Bilal Nazir -
I have a problem while installing 9iAS R2 on RH LInux 8.
When database configuration assistant starts during the installation of 9iAS infrastructure, it gives an error "Error creating CONTROL FILE" followed by many other errors.
Please help me out.
ZulqarnainI had the same problem, but with RH9
To fix, I ran orapwd from the $ORACLE_HOME/bin directory to create a password file called orapw. Then I moved this file to the directory where the configuration assistant complains it cannot find the file. Fixed. Obviously, just ignore the errors from the configuration assistant about the CONTROL FILE until it tells you the location of the file it is looking for. -
Error in Control Framework: Background job failed
Hi Experts,
One background job failed with job log: Error in Control Framework in ECC 6.0 system; the job is supposed to produce a XML report. Can anyone please give some idea on this why it could happen? One SAP note 893534 has described same kind of issue but in CRM system. That note even cant be implemeneted in ECC 6.0. Any workaround? Is it a BASIS issue here?
Thanks & Regards,
SKBHello,
please check the variant. We had this problem, and when checking the variant I got a shortdump because the variant did not fit to the program (there were problems with subscreens in the selection screen). After adjusting the variant with program RSVARDOC_610 the variant was ok.
I can not check if this solved the problem because the job runs weekly, and the next job is on Monday. But give it a try...
HTH,
Jens Hoetger -
Error in Control Framework with GUI_DOWNLOAD FM
Dear All,
I am using GUI_DOWNLOAD FM to download a file in PDF format to presentation server.
The code has been written in an enhancement spot in a class "/SCA/CL_SVORDER", method "Print" on an SNC server.
On execution I get the error "Error in Control Framework".
First I tht that this has something to do with the data table. But when I tried to pass a simple table of Integers in ASC format, it gave the same error.
Please assist.
*----Begin of Code Snippet
data: fullpath type STRING value 'D:\temp\PO.pdf',
bin_filesize type I,
filetype type char10 value 'BIN'.
bin_filesize = numbytes.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = bin_filesize
filename = fullpath
FILETYPE = filetype
IMPORTING
FILELENGTH =
tables
data_tab = t_data
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*----End of Code SnippetHi!
I have the same error, but i need to use CSV Format.
in another program, i used this with XML format.
lv_xml = lr_element->to_xml( ).
Converts the string to xstring
lv_xxml = wd_this->convert_file( lv_xml ).
Shows it in a new browser window
*cl_wd_runtime_services=>attach_file_to_response(*
*i_filename = lco_filename*
*i_content = lv_xxml*
*i_mime_type = lco_mime_type*
*i_in_new_window = abap_FALSE*
*i_inplace = abap_false ).*
Regards! -
Error in Control Framework in smart forms programms use GUI_DOWNLOAD
IN VF02 smartforms ENTRY form , I add a function about save PDF at local PC. When I print the smartfomrs,There is ERROR message in update modules.
IN SM13 can see the ERROR message.
Function Module: RV_MESSAGE_UPDATE
Status :Update was terminated
Error details: FES 022: Error in Control Framework
I USE GUI_DOWNLOAD FUNCTION at my code. WHEN I mark it,no error message. I must use the Similar function.
How do I solve this problem???Hello,
Check the thread:
Re: Error in Control Framework in smart forms programms
Regards,
David -
Hello,
Can someone please explain what this error means "Error in Control"? I am using SAPGUI command to record and execute. I create a custom document and once created that doc appears in the grid on the upper half of the screen. I click on the created document to check/change values of different columns. Now while recording the click operation opens the document i created however while executing it does not open the document created. It opens some other document which is there in the grid.
command editor contains following information
Userchanged State
GuiElement Shell GuiShell GridView
Name Shell
Type GUI Shell
SubType Grid View
State
currentCellRow
Name CurrentCellRow
value[1]5
clickCurrentCell.
And I get the Error In Control message while executing.
Thanks,
GS>
Rajeev Chavan wrote:
> Hello,
>
> Can someone please explain what this error means "Error in Control"? I am using SAPGUI command to record and execute. I create a custom document and once created that doc appears in the grid on the upper half of the screen. I click on the created document to check/change values of different columns. Now while recording the click operation opens the document i created however while executing it does not open the document created. It opens some other document which is there in the grid.
>
> command editor contains following information
> Userchanged State
> GuiElement Shell GuiShell GridView
> Name Shell
> Type GUI Shell
> SubType Grid View
> State
> currentCellRow
> Name CurrentCellRow
> value[1]5
> clickCurrentCell.
>
> And I get the Error In Control message while executing.
>
> Thanks,
> GS
Hi,
The issue is only due to some unexpected screen sequence.
What can be done to solve this?
1)Check the flow and you can activate the highlighting feature while executing and you can identify the error where it goes wrong?
2)You may need to re-record with maximum options.You have to make few screens optional.
This will solve your issue.
Regards,
Senthil -
Hi All,
I created a webdynpro development. In that all applications are working fine. One button i added and click of that it will download all the attachments corresponding to the sales order and it will place the attachments in desktop folder.
I written all the code in one function module and in the method i associated this function module.
If i debug this, this is working fine. when i click the download button, it shows the error - error in control framework
Any body has any idea about it?
Regards,
Vinoth.Hi VinothKumar,
Did u tried running the method directly. There also u are not getting any error means, you have to check the code in wda where you created the method for that class.
If you are using the fm directly inside the method of wda, then you have to debug step by step in wda.
Regards
Sarath -
Error in Control Framework in smart forms programms
IN VF02 smartforms ENTRY form , I add a function about save PDF at local PC. When I print the smartfomrs,There is ERROR message in update modules.
IN SM13 can see the ERROR message.
Function Module: RV_MESSAGE_UPDATE
Status :Update was terminated
Error details: FES 022: Error in Control Framework
THE CODE:
FORM processing USING proc_screen
CHANGING cf_retcode.
******I ADD THE CODE
PERFORM DOWNLOAD_AS_PDF USING lf_fm_name
ls_control_param
ls_composer_param
ls_bil_invoice
nast
repeat
ls_bil_invoice-HD_ORG
ls_spoolid
CHANGING cf_retcode
ENDFORM.
IN DOWNLOAD_AS_PDF FORM ,I USE FUNCTION : P_fm_name(smartforms function) CONVERT_OTF GUI_DOWNLOAD
WHY the UPDATE MODULE have ERROR MESSAGE???
How do I solve this problem???Hello,
Your error message is related to GUI_DOWNLOAD, which is a frontend function.
You simply cannot use it in background, because it puts a file on the
frontend PC where you start the function (WS = WorkStation).
Note that GUI_DOWNLOAD is intendted to be used for dialog user
and will not run at BACKGROUND.
You can review SAP Library: ABAP Programming (BC-ABA)
->Saving Data Externally
->Working with Files
->File Handling in ABAP
Regards,
David -
Abap mapping - Error in Control Framework
Hi Gurus,
Scenario: IDOC - -- XI -
Http (post)
i am using ABAP mapping for IDOC to XML. I am able to test it using sxi_mapping_test which gives me output XML. But, when i test the scenario from RWB, it fails with "SYSFAIL" error in inbound queue as per moni.
error - "Error in Control Framework".
Looks like it did not even go to message mapping pipeline step.
Please help.
Thank you,
mkHI,
Hope you have done all the necessary pre-requisites for ABAP mapping
This may help u- http://help.sap.com/saphelp_47x200/helpdata/en/55/bff20efe8c11d4b54a006094b9456f/content.htm
just cross verify with this guide-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
Please also try to debug as follows...
put a break point inside your class/method....
goto tcode SXI_MAPPING_TEST....give in the configuation details of your scenario...and when you execute, give the IDOC-XML, copy it from SXMB_MONI where you are getting the error....
when you execute, it shoudl stop at the break point that you had set in your class....continue debugging using 'F6' function key, and check where you are hitting this error...
The chances are that the FM that converts IDOC-XML to flat file format might not have been executed correctly...
Thanks
Swarup -
ERROR: No control line for item 000010 in invoice document.
Hi,
Here, in VF02, when I try to release the document to accounting, system is giving following error.
ERROR: No control line for item 000010 in document 852660. (where 852660 is invoice number)
Please guide.
Thanks in advance.Hi Chetan
you will have to check whether have the Account Assignment Group been input in the Customer Master (Billing tabstrips - Accounting sections - Field name: Acct assgmt group).
The Account Assignment Group will be copied automatically into the sales order.
Check whether the configuration in transaction VKOA have been done correctly.
Check whether the sales order (VA03 - Goto - Header - Financial Accounting - Field name: AcctAssgGr) have been filled in automatically.
Check whether the billing document (VF03 - Goto - Header - Header - Field name: AcctAssgGr) have been filled in automatically.
If the customer master have not been maintained and the user have already input the sales order, then the user will have to maintained the Account Assignment Group manually either in the sales order or the billing documents.
Take note for One Time Customer, the user have to input the Account Assignment Group manually into the sales order. One Time Customer can be used by many customer, therefore, the system will not be able to determine the Account Assignment Group manually.
Hope it will help u
Regards -
Hi All,
I am passing input data to RFC, In input parameters I am passing data to three import parameters and one table parameter of RFC from Web Dynpro. Once I execute it, am getting error "Error in Control Framework, error key : RFC_Error_System_FAILURE".
If anybody aware about it, please guide me.
Thanks in advance.
Regards
MangleshHi Manglesh,
Please verify the Jco settings once.
Please go through the weblog /people/sap.user72/blog/2005/01/08/adaptive-rfc-models-in-web-dynprosome-pointers
Regards, Anilkumar -
Ecatt error in production environment only
Hi,
I have created one E-CATT to upload booking for the course. This E-CATT is working fine in development and Quality environment.
However, in production system its giving error 'E-CATT error ATT377 control data is obsolete, rerecord (VERBS - Name: Create Object CATT: <none> Callno: 000001)
Please revert me why this error is occurring in production only.
Thanks & regards
VIJAY PATILHi,
Please make sure that your production system has the same SAP support package levels as other systems. Otherwise, you may get this error.
Please also check SAP note 802475.
Regards,
Dilek -
Error loading control. a newer version needed. the default settings will be used
Hi I am using LabVIEW DSC 7.1 for programming my application. My VI contains NI hypertrend which I am publishing on a browser using the web publishing tool. When I open the web browser on a different computer I get this error- Component works Error loading Control. A newer version needed. The default settings for the control will be used. I have disabled firewall, pop up blocker etc...but for some reason it keeps giving me the same error. I read the knowledge base and it talks something about the .OCX file. I am not sure what I am supposed to do..I also have the DSC runtime installed in my machine. I'd appreciate it if someone could help me with this.
If you're on a 64-bit OS, OCX files must be in the folder: %windir% \ SysWOW64
and not in %windir% \ System32 (only for 32 bits OS)
>> %windir% is the environment variable that defines the Windows folder! (eg: C:\Windows)
French version:
Si tu es sur un OS en 64 bits, les fichiers .ocx doivent se trouver dans le dossier : %windir%\SysWOW64\
et non pas dans %windir%\System32
>> %windir% étant bien sur la variable d'environnement qui défini le dossier de Windows ! (par ex: C:\Windows) -
Hi,
I am working with with ECATT error log, I want to make error log to appear more user friendly so that end user can understand it well.
so what i want is to capture main error message from error log and want to display in some spread sheet.
My first aim is to capture those messages.
Can any one please help me........Hi
SAP users use CATT frequently to upload master data or to make changes to master data records. SAP Consultants and Abapers tend to use it for creating test data. The transactions run without user interaction. You can check system messages and test database changes. All tests are logged. The CATT records your keystrokes while performing the actual transaction. You then identify the fields that you wish to change in that view. Then export this data to a spreadsheet to populate with the data required. This is uploaded and executed saving you keying in the data manually.
To perform CATT, it has to be enabled in your production environment (your systems administrator should be able to do this - SCC4). You will also need access to your development system to create the CATT script.
The process of uploading data with a CATT:
Activate CATT in your client
In transaction code SCC4 - click the change button
Double click on the client number
In the Restriction section, tick Allows CATT processes to be started.
Upload data using CATT
1. Create Import variant for the fields you need
Transaction SCAT
Goto Parameters
Create Import Variant
Goto Variant -> Edit
Goto Variant -> Fast entry or F9
Duplicate 01
2. To change the MRP Group for a list of Material
Assuming that I want to change the MRP Group for a list of Material.
My text files should look something like this:
[Variant ID] [Variant Text] &ZDISGR &ZMATNR
--> Parameter texts MRP group Material
--> Default Values M1 A001
Changes to the default values displayed above not effective
#01 M1 A001
#02 '' A002
#03 M1 A003
Note : '' denotes a blank in the field. e.g. Material A002 MRP group will be replaced by a blank.
3. Configure the recorded entry fields to read from the imported text file data
In the CATT : Maintain functions test case Screen
Double click on the Object Name
Double click on the screen number with your desired fields
Park the cursor on the fields
Click Edit -> Details
Fill in the Parameters Name and Field Contents
Finish Save it.
Assign your text file data.
In the CATT : Execute test case Screen
Click External from file and choose your text file
CATT will now read from your text file and update whatever data you have specified.
u can go through this link
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=catt&cat=sdn_all
Check CATT help. http://****************/Tutorials/eCATT/eCATTMain.htm
Reward points if useful
Regards
Anji
Maybe you are looking for
-
Create a Custom View in Project Server 2010 that is Visible in MS Project
Hello All, We want our PMs to consistently report Physical % Complete, but couldn't find an existing "Status" or "EVM" view. So, in Project Server 2010, using Server Settings > Look and Feel > Manage Views, I created a customized project view using
-
I realize NOW that I should have moved the events and projects to external HD within iMovie but unfortunately I didn't. I also upgraded to Mavericks with the new internal HD. Problems... 1) If I try and open a movie in iMovie from the Movies folder,
-
How to update key fields for table
Hi, how to update key fields for a table.The update statement is not working for the same. Regards,
-
Can I print my calendar and contacts
Can I print my calendar and contacts? I have to reset my phone due to a software issue.
-
Here is a simple example in how to Colorize your layers in two different ways. First, duplicate the layer you would like to adjust. To duplicate the layer, select the layer in the Layer palette. Then choose Layer > Duplicate Layer. You can click the