ECATT error message

Hello Guru's,
Will anyone will suggest what is the error like, i have created 3 versions eventhen it is generating the same message.
it is updating the file but generating the following message,
will anyone suggest me, WHAT WOULD BE THE REASONs?
what are the options that i look for it.
Error when reading file c:\SAPWORKDIR\VAR_ECTC_Z_MM01_3TXT(&LASST)OBJ_TYPE& Z_MM01_TC_3)
full points for the solution

I am not clear on your requirement. But what I understood form this is:
you are uploading data to the variants. If yes.
Then you download the variants from eCATT to desktop. and open with excel and save. But dont change the parameter positions. Just pass the data under the coloums and then upload.
Hope it may work...
Thanks
Chandra

Similar Messages

Capturing ECATT error messages in flat file

Hi Floks,
i captured what i am uploaded data in test script . i want cature what i am getting error log in test script that's i want to load in flat file .how can i fulfil this requirement let me get some idea on this .
thanks,
Suresh

Perhaps function module ECATT_LOG_GET_MESSAGE_LIST might be useful. If you call the function module with the log key (apparently identical to the number of the test configuration) using IM_ALL_MESSAGES = 'X' then it returns for each eCATT statement (e.g. FUN) the collected messages.
Regs
Tushar

Ecatt error messages in Log while implementing Solution Builder

Hi all,
We are implementing SAP Best Practices using Solution Builder. During the solution builder set up, there is a step where we have to "Upload Installation Data". As per the step, i have downloaded the required BP_CRM_V1_2007_Installation_Data.zip file, unzipped it and uploading it from here. But its resulting in an error, and the log says something about ECATT/BCSET Objects. Has anyone faced a similar problem? Any help would be appreciated. Thank you.
Regards,
Padma Guda

Hi Padma,
could you breif the problem statement?
Regards,
Venky

How To Handle Error Message In TCD Recording?

Hi All,
I tried recording a transaction (my own transaction) by not enterring value in an obligatory field. the error message came. but when i executed the script, it showed an error. but actualy, the error message was expected right? how to handle this situation? i tried with tcd and sapgui recording. both gave almot the same result.
i am including the script which i have written.
MESSAGE ( MSG_1 ).
*TCD ( ZCUST , ZCUST_1 , ECC ).
SAPGUI ( SAP_1 , ECC ).
ENDMESSAGE ( E_MSG_1 ).
v_mno = &tfill.
v_msg = E_MSG_1[v_mno]-msgtext.
v_mtp = E_MSG_1[v_mno]-msgtyp.
If Msg Type is E *** **** It Has To Be E ****
IF ( v_mtp = 'E' and v_msg = 'Account no AC02 does not exist EXIT = X').
logtext(0,'Passed').
ELSE.
log(v_mtp).
log(v_msg).
logtext(1,'Failed').
ENDIF.
End Of The Condition For Message Type E ******

I have recording messages using the TCD command.
My script (very simple):
MESSAGE ( MSG_2 ).
TCD ( ME21 , ME21_1 , R3 ).
ENDMESSAGE ( E_MSG_2 ).
In the MESSAGE command interface, I defined rules to allow several kind of messages.
Execution: 3 mesages found:
      * transform PR into PO
       MESSAGE     MSG_2 [1,009 sec]
         RULES MSG_2 = XML-DATA-01
        Message MODE EXIT TYPE ID    NR
        [1]      'A'         'I'   06    456
        [2]      'A'         'W'   'ME' 080
        [3]      'A'         'E'   'ZE' 029
         TCD    ME21                 [0,545 sec N] Target sys R3 -> ZDA010A219
        S06017 Standard PO created under the number 8201075606
           Tgt System Z_A219->R3->ZDA010A219 (ZDA 010 ... HP-UX ORACLE)
           CALL TRANSACTION ME21 ME21_1 XML-DATA-01
           03 MESSAGES FROM ME21 ME21_1 XML-DATA-01
           I 06 456 Release effected with release code 00001
           W ME 080 Delivery date: next workday is 02.05.2007
           S 06 017 Standard PO created under the number 8201075606
       ENDMESSAGE E_MSG_2 (&TFILL = 0)
As you can see, 3 messages are found but the &TFILL variable is still 0.
I guess (but cannot test yet) I would manage to record those messages using SAPGUI command.
Is there anything wrong with my script?
My SAP_BASIS component is in version 620. I'm not using the ultimate version of eCATT (no WEBDYNPRO command, etc.). Could it be an explanation?
Thank you in advance,
Olivier

Is there any command/FM to get rid of error message in CATT?

Dear friends,
Is there any command/FM to get rid of error message in CATT? such as the following in eCATT script?
MESSAGE ( MSG_1 ).
ENDMESSAGE ( E_MSG_1 ).
or any body now how to get the socrce code of these commands?
Many thanks!
Cliff

Hi,
See the help
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e2143b408e11d1896b0000e8322d00/frameset.htm
Regards
Kiran Sure

Searching by aggregate type field leads to error message in Workbench

I defined a persistent pojo entity that contains an attribute as an aggregate type mapping.
Now I tried to query entities with an instance of that aggregate type as parameter to the query (TL expression query in the workbench).
First argument (query key) is the attribute of the entity (aggregate type), operator is EQUAL and second argument is the parameter which is of same aggregate type.
I thought this would be the natural way to query but the workbench shows an error message:
0251 - The expression (line 1.) on query readByOwner is invalid. When querying on a reference mapping, only unary operators (Is Null, Not Null) are supported.
Is this really an error? Where is the problem?
I found a similiar post from 2003 on this forum, saying that it is a bug, though I'm unsure if it is the same problem. I use the most recent version of Toplink and Workbench, so it's hard to believe that such a basic problem was not fixed for 5 years... was it?
Regards,
Sebastian

I have recording messages using the TCD command.
My script (very simple):
MESSAGE ( MSG_2 ).
TCD ( ME21 , ME21_1 , R3 ).
ENDMESSAGE ( E_MSG_2 ).
In the MESSAGE command interface, I defined rules to allow several kind of messages.
Execution: 3 mesages found:
      * transform PR into PO
       MESSAGE     MSG_2 [1,009 sec]
         RULES MSG_2 = XML-DATA-01
        Message MODE EXIT TYPE ID    NR
        [1]      'A'         'I'   06    456
        [2]      'A'         'W'   'ME' 080
        [3]      'A'         'E'   'ZE' 029
         TCD    ME21                 [0,545 sec N] Target sys R3 -> ZDA010A219
        S06017 Standard PO created under the number 8201075606
           Tgt System Z_A219->R3->ZDA010A219 (ZDA 010 ... HP-UX ORACLE)
           CALL TRANSACTION ME21 ME21_1 XML-DATA-01
           03 MESSAGES FROM ME21 ME21_1 XML-DATA-01
           I 06 456 Release effected with release code 00001
           W ME 080 Delivery date: next workday is 02.05.2007
           S 06 017 Standard PO created under the number 8201075606
       ENDMESSAGE E_MSG_2 (&TFILL = 0)
As you can see, 3 messages are found but the &TFILL variable is still 0.
I guess (but cannot test yet) I would manage to record those messages using SAPGUI command.
Is there anything wrong with my script?
My SAP_BASIS component is in version 620. I'm not using the ultimate version of eCATT (no WEBDYNPRO command, etc.). Could it be an explanation?
Thank you in advance,
Olivier

ECATT ERROR LOG

Hi,
I am working with with ECATT error log, I want to make error log to appear more user friendly so that end user can understand it well.
so what i want is to capture main error message from error log and want to display in some spread sheet.
My first aim is to capture those messages.
Can any one please help me........

Hi
SAP users use CATT frequently to upload master data or to make changes to master data records. SAP Consultants and Abapers tend to use it for creating test data. The transactions run without user interaction. You can check system messages and test database changes. All tests are logged. The CATT records your keystrokes while performing the actual transaction. You then identify the fields that you wish to change in that view. Then export this data to a spreadsheet to populate with the data required. This is uploaded and executed saving you keying in the data manually.
To perform CATT, it has to be enabled in your production environment (your systems administrator should be able to do this - SCC4). You will also need access to your development system to create the CATT script.
The process of uploading data with a CATT:
Activate CATT in your client
In transaction code SCC4 - click the change button
Double click on the client number
In the Restriction section, tick Allows CATT processes to be started.
Upload data using CATT
1. Create Import variant for the fields you need
Transaction SCAT
Goto Parameters
Create Import Variant
Goto Variant -> Edit
Goto Variant -> Fast entry or F9
Duplicate 01
2. To change the MRP Group for a list of Material
Assuming that I want to change the MRP Group for a list of Material.
My text files should look something like this:
[Variant ID] [Variant Text] &ZDISGR &ZMATNR
--> Parameter texts MRP group Material
--> Default Values M1 A001
Changes to the default values displayed above not effective
#01 M1 A001
#02 '' A002
#03 M1 A003
Note : '' denotes a blank in the field. e.g. Material A002 MRP group will be replaced by a blank.
3. Configure the recorded entry fields to read from the imported text file data
In the CATT : Maintain functions test case Screen
Double click on the Object Name
Double click on the screen number with your desired fields
Park the cursor on the fields
Click Edit -> Details
Fill in the Parameters Name and Field Contents
Finish Save it.
Assign your text file data.
In the CATT : Execute test case Screen
Click External from file and choose your text file
CATT will now read from your text file and update whatever data you have specified.
u can go through this link
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=catt&cat=sdn_all
Check CATT help. http://****************/Tutorials/eCATT/eCATTMain.htm
Reward points if useful
Regards
Anji

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error message into a Variable.

Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!

Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a®

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod Touch will no longer sync...error message.

For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone?

What is the exact wording of the error message?

Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive. The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache. There are 4 files in there that are taking up 124 GB! Can I simply delete these files or will it corrupt my regular files? I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

Yes, you can delete the cache files manually, Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches. Depending on your files, that can take a few minutes or several hours.
A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

ECATT error message

Similar Messages

Maybe you are looking for