ECATT for ITS based applications

Is eCATT recordings / testing possible for ITS based applications?. If yes, could you please list out the limitations also if possible.
I for sure know that eCATT does not support BSP applications but about ITS .... I m not sure
Hoping for some replies ....
Btw, are there any other tools out in the market that help in the testing of ITS based applications?
How about Watir? (Refer : /people/justin.ramel/blog/2006/07/28/automated-functional-testing--part-1-of)

Hey Guyzz....
Thanks for your inputs on other integrable tools (certified by SAP too) with eCATT for testing SAPGUI with HTML (ITS).
Justin, Did you setup worksoft certify with ecatt for ITS applications?. Also, can it support recordings of BSP and webdynpro applications?.
Thnx in advance!

Similar Messages

Utilities and SDK for Subsystem for UNIX-based Applications in Windows 8 doesn't install

Trying to install the package and well into the process I get an error message saying that my processor isn't supported and to contact my vendor.. I have a Lenovo U 410 LT with Win 8 Pro. It has an Intel Core i7 processor. I also tried the AMD version thinking they may have been swapped but it also does not install. How to get it installed? I really need the NFS in it.

Hi stewartmcadoo,
Welcome back to Lenovo Community Forums!
I’m sorry to hear that there is an error message displayed in your U410 Laptop while installing “Utilities and SDK for Subsystem for UNIX-based Applications in Windows 8”, make sure you are installing this application as an Administrator User, if the issue is same even in this user account, I suggest you to download the package again and right click in the downloaded file select “Run as administrator” to get it installed in administrator mode, below is the link to download the SDK package:
Utilities and SDK for Subsystem for UNIX-based Applications in Windows 8
Hope this helps!!!
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

JRE1.6 in Windows Vista for Swing based application

Hi,
I am running a Swing based and applet based application in Windows VISTA using JRE 1.6_U13. The text font is appearing bold in JRE 1.6_U13 whereas it is appearing normal while using JRE 1.5, though the style of the Font
is "SansSerif", PLAIN and size 12 for both JRE 1.6 and JRE 1.5.
Reason for the Issue:
Swings follows the concept of taking the display values from the Windows UIManager(). The UIManager consists of keys and values. The values for the keys change from OS to OS. As a result, if the UIManager key values are not overridden with the customized values, the display will change from OS to OS. Hence the issue has occurred.
Analysis:
Case-1:
1.     CALM is setting the font style to Font("SansSerif", Font.PLAIN, 12).
2.     This font is being set to the Label and Text components in swings.
3.     The font class consists of Font.PLAIN argument whose value is 0 as per the java API.
4.     This value cant be changed.
5.     Hence we couldnt solve.
Case-2:
1.     We tried to get the key value for the key Label.font and tried to override its value.
2.     But then the issue is with the Font.Plain which is one of the arguments in Font object.
3.     Hence couldnt achieve it.
Case-3:
1.     We thought of creating a new font where in we can have control over the weight and width of the text. Then set this font to respective key of the UIManager.
2.     Here the weight indicates the bold thickness. As a result of which we thought of changing the weight.
3.     But then the options that we have in the API are less and the least weight value is TextAttribute.WEIGHT_EXTRA_LIGHT which is equal to 0.5.
4.     This value is not sufficient as the boldness of the text is comparatively more than the text that is appearing in jre-1.5.
5.     Then we tried to give the value manually, instead of using the API. But then, it was mentioned in the API that any values mentioned other than the ones specified in the API will be rounded to the nearest integer.
6.     By doing this we have customized the boldness of the Label, but could not achieve the required boldness of the Label.
Please need a urgent solution.

Hi,
The reason of the problem is Antialiasing effect of the graphics. In Control Panel -> Performance Information and tools -> Adjust visual effect, if the 'Smooth edges of screen font' is unchecked then the boldiness of the font or the Antialiasing effect is not there.
But this effect is reflecting not only on my swing based and applet based application but also on the whole system.
I tried to call the renderingHint method and change default value of the key KEY_TEXT_ANTIALIASING to VALUE_TEXT_ANTIALIASING_OFF, to make the antialiasing effect off for the application.
I implemented the below code:
Graphics g= new Graphics();
Graphics2D g2d = (Graphics2D)g;
g2d.setRenderingHint(RenderingHints.KEY_TEXT_ANTIALIASING,
RenderingHints.VALUE_TEXT_ANTIALIAS_OFF);
But I am not able to create an object of Graphics.

Load testing tool for FMS based application

Is there any tool which can be used for Load testing of
FMS?Our Flash based application uses FMS for streaming LIVE
audio/video and data and we need to test the sceanrio that what
happens to remote server and FMS when 1000 users get connected.

quote:
Originally posted by:
dineshawasthi
Is there any tool which can be used for Load testing of
FMS?Our Flash based application uses FMS for streaming LIVE
audio/video and data and we need to test the sceanrio that what
happens to remote server and FMS when 1000 users get connected.
No standard tool will be able to test your own application
the way you describe here.
The answer however is pretty simple ; write a simple swf that
can connect (automatically) to a random available instance and let
it play a stream.
Since you probably developed your application yourself this
shouldn't be a problem.
Next open 20-50 swf's (in 20-50 browsers) on your desktop.
Repeat on the desktops of your collegues. Open as many swf's
as possible. (if your FMS server is in your LAN otherwise you'll
probably will hit your bandwidth-limit soon)
This will give a very good impression of load, bandwidth and
stability of your application.

AD sync service account for cloud based application

i have a cloud based application that i am setting up AD sync with. in their directions below i have bolded the ones i need answers too. my domain functional level is windows server 2003
The active directory synchronization requires the following:
A domain user which has the following properties:
The password is known and does not expire - completed
The domain user account has read permissions to all objects in the entire domain within active directory
Confirm that if the domain has been upgraded to Windows 200x functional level from Windows NT4, 2000 or 2003 that we have the appropriate Group permissions below available to the domain user account for the synchronization in addition
to read permissions to the entire domain:
Pre-Windows 2000 Compatible Access
Pre-Windows 2003 Compatible Access
The username and password are passed using the appropriate communication channels - completed
i have created a service account in my AD called myappldap. does a domain user have read permissions to all objects in the entire domain within active directory without adding the to any other security groups except domain users? Or do i have to click on
the top level domain object in AD>go to properties>security>and give them read permission and proprogate down those premissions? Also i do not see Pre-windows 2003 compatible access as a security object i can give this service account read permissions
to. i just wanted to confirm that this is because i am still running a functional domain of windows server 2003?

A domain user has complete Read on everything in the forest.
As for the Pre-Windows 2000 Compatible group, that's a reduced security group to allow NULL password for pre-Windows 2000 DCs, such as the way NT4 RRAS (VPN servers) used. In Windows 2000 and newer, we can eliminate that group, since it's a security concern.
More info to read up on it, here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/e8dfacba-985f-4042-abeb-f341bf37522f/prewindows-2000-compatible-access-group?forum=winserverDS
Everyone group does not include anonymous security identifier
http://support.microsoft.com/kb/278259
As for Pre-Windows 2003, I haven't come across anything that would say
pre-2003. It almost appears that the software is using NULL or some other kind of reduces security on the password. Then again, I could totally be wrong. Is that specifically how the third party software specifies it in the docs?
Can you post a link to it?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Best Available IDE for JSF based applications

I m working on JEE project. Now i am supposed to implement my web modules in JSF, so i just want to ask, What is best IDE available for JSF to use?
I have used JBuilder (It Lacks Design View for GUI).
I also have used NetBeans (same problem).
and at last,
Sun Creator 2 does not support JBOSS.
So please help me out in this regard, so that i could start with optimal IDE for JSF based development.
Thanks in advance. [asif]
(I wish microsoft to make an IDE for JEE.)

have a look at myEclipse.
btw, there are several threads about this concern. use search.

Providing online Help for Flex-based applications

I have been asked to provide online Help for a Flex application. As I have never done this before, I have a few questions:
- What is the format for the Help topics?
- Are there control-type files (e.g., TOC, index, project file) that need to be created? If so, what is the format for these?
- Is the Help compiled? If so, which compiler is used?
- How is context-sensitive Help created?
I'd also like to know if there are any resources I could look at that covers these Help issues. Thanks.

Hi,
You can acheive the same by the addition of [USER-COMMAND fcode].
RADIOBUTTON GROUP group [USER-COMMAND fcode] - The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
So you code should be altered as
PARAMETERS: rb_appl RADIOBUTTON GROUP rad
                     USER-COMMAND radclick    "Addition which you have to make.
                     DEFAULT 'X',
            rb_pres RADIOBUTTON GROUP rad ,
            p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
    PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
Thanks & Regards,
Harish

USB interface locked for windows-based application via VMWare fusion 3

recently I found some applications based on windows XP (I used Vmware fusion 3 on mac OS X 10.6.3, macbook pro) can't find the h/w connected to USB interface..e.g.
I have a 3G wireless modem card, the console in windows (of course based on virtual machine VMWARE) says no any modem card founded when I connected to my mac pro with USB interface..
another case is I use ebank client s/w with U-key.. of course doesn't find any U-KEY when i insert it too..
It seems that the USB interface is locked when I use windows-base application via virtual machine, right?

yes, your suggestions are very useful.. I tried again..it asked me to select if connecting to "windows" or "mac".. I made the mistakes before.. Now I selected "windows" and it was okay..
btw, one more question about the bridge connection.. when I dial through my 3G modem card (based on windows XP), I just only use IE as the web browser.. Safari is not ok. I assumed that I should make a bridge connection between 3G modem card and LAN connection, right? If yes, how to do it? I can't select two connections once a time in control panel..
Thanks for your answer!

Table View in View-based Application

Hi.
I want to use an UITableView in a View-based Application.
All examples I found are for Navigation-based Applications.
I Found only one example for View-based Applications, but it create all components himself without the Interface-Builder.
I search an example with Interface-Builder.
My main problem is, when i create a view with Interface-Builder, the controller class does not inherit from UITableViewController.

GrinderFX wrote:
I want to use an UITableView in a View-based Application.
Hi, and welcome to the Dev Forum!
Firstly, I would point out that you don't need to use UITableViewController to control a table view. The table view controller is just more convenient. So for example, you could simply drag a table view from the library in IB and drop it onto your view. Then you could hook up the table view's dataSource and delegate outlets to the File's Owner. Then you would add the data source and delegate protocols to the @interface of your UIViewController subclass and add the required data source and delegate methods to the @implementation.
I mention the above because building your table view that way is very instructive. If you want to learn more about table views in general I would recommend Chapter 8 of +Beginning iPhone Development: Exploring the iPhone SDK by Mark and LaMarche+, which includes 3 table view projects that don't involve a navigation controller.
My main problem is, when i create a view with Interface-Builder, the controller class does not inherit from UITableViewController.
Returning to your specific question, IB allows you to change the class of an object. Here are the steps to use the View-Based Application template as you described (In the following I'm using Grinder as the name of the project; e.g. the app delegate class is named GrinderAppDelegate, and the view controller subclass is named GrinderViewController):
1) _Change parent of view controller subclass in your code_
In GrinderViewController.h, you only need to change the superclass from UIViewController to UITableViewController:
@interface GrinderViewController : UITableViewController {
However it will be easier later on if you make new files from the UITableViewController file template:
a) Ctrl-click on GVC.h and GVC.m in the Groups & Files tree; select Delete->Also Move to Trash;
b) Ctrl-click on Classes; select Add->New File->iPhone OS->Cocoa Touch Classes;
c) Select UITableViewController subclass from the right center panel and click Next;
d) File Name: GrinderViewController.m; check Also create GrinderViewController.h;
e) Make sure the name for these new files is exactly the same as the ones you deleted; if you make a mistake here, delete the new files and start over, because that name must be the same in several other files;
f) Click Finish; the replacement files should now appear under Classes.
2) _Change the view controller class in IB_
a) Double click on MainWindow.xib under Resources in the Groups & Files tree;
b) Make sure the MainWindow.xib window is open by selecting Window->Document from the IB menu;
c) Locate the View Mode switch, upper-left, in the xib window, and select the Center position;
d) The xib window should now be displaying two columns with small icons on the left;
e) Select the Grinder View Controller icon;
f) Select Edit-Delete to delete that icon;
g) Select Tools->Library from the menu, and expand Controllers in the Library Panel;
h) Drag a Table View Controller to the xib window and drop it right under the app delegate icon;
i) Select Tools->Identity Inspector from the menu to open the Grinder View Controller Identity Panel (the new Table View Controller should still be selected in the xib window);
j) Under Class Identity, select Grinder View Controller from the list; tab out of the Class field to be sure the selection is recorded;
k) Ctrl-Click on Grinder App Delegate and connect the view controller outlet (ctrl-drag) to Grinder View Controller;
l) Expand GVC in the xib window and delete the Table View icon (since we want it in the other xib file);
m) Reselect the GVC icon and open the Grinder View Controller Attributes panel;
n) Under View Controller, select GrinderViewController from the NIB Name list;
o) In the Table View Controller IB Editor window, select GrinderViewController.nib to open the other xib file;
p) Make sure the GrinderViewController.xib window is open in small icon mode as in steps b-d above;
q) The class of the File's Owner should be GrinderViewController;
r) Delete the View icon;
s) Drag a Table View from the Library to where the View icon was;
t) Ctrl-click on File's Owner and connect (ctrl-drag) it's view outlet to the Table View;
u) Ctrl-click on Table View: connect both the dataSource and delegate outlets to File's Owner;
v) File->Save both xib files.
3) _Make some rows in the table view and test_
a) Open GrinderViewController.m in Xcode;
b) Add the commented lines (be sure to use the correct line for your target OS);
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
return 20; // <-- change to more than zero
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
static NSString *CellIdentifier = @"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease];
// Configure the cell
// add this line for OS 2.x
cell.text = [NSString stringWithFormat:@"Row %d", indexPath.row];
// add this line for OS 3.0
// cell.textLabel.text = [NSString stringWithFormat:@"Row %d", indexPath.row];
return cell;
c) Build and Go.
I should add that the procedure might be a little easier if you start with the Window-Based Application Template. But the above is good practice in editing xib files.
Hope that's helpful!
- Ray

Please tell me if coding for ITS is done in ABAP.

Hi all,
Please tell me if coding for ITS based on ABAP.
Thanks.

Hello Sanjiv,
I'm not sure I understand the question...
ITS uses BusinessHTML and HTML and other Internet standards (css, js, etc). However, you can develop in ABAP and then use SE80 to generate a template for you or use the WEBGUI service to call your ABAP developed transaction directly. You can find more information by using the links at the top of the ITS forum to go to the Wiki or FAQ or Product page for the ITS.
Edgar

Differences between ITS based and web dynpro based ESS

Hi all,
What are the main differences between ( in functionality ) for ITS based and web dynpro based ESS.
I know a few
Underlying technology
ITS ESS had inbox concept, where as web dynpro based ESS/MSS has UWL concept for approvals.
The time statemment in ITS uses smart form while we can use Adobe document services for time statement in ESS 2004.
Funcitonality
There was not collective time approvals option In ITS ESS ( not even in ESS 2004 ) but ther is a collective time apporvals in ESS 2004s
Am not pretty mich intrested in look and feel, or the overview page concept but any additional functionality and a shift in the technology used.
Please add.
regards
Sam
Message was edited by:
        sameer chilama
Message was edited by:
        sameer chilama
Message was edited by:
        sameer chilama

answered

How to open the link in new firefox window for web desktop based application? Or how to open the mail/website/rss link in new firefox window

I am using the firefox 3.6. My problem is that I am using the web desktop and few web desktop based application directly opens link. If I click on rss link than it opens in same window, so no longer access to web desktop. I want to open any kind of link in new window instead of same window. I have tired to change the value of browser.link.open_newwindow, browser.link.open_newwindow.restriction but doesn't work. Also gone through the https://developer.mozilla.org/en/window.open but not sure where to do this in web desktop based application or firefox where we connect the web desktop?
Is there any way to open the link every time in new firefox window?

Hi Joseph,
the HTMLB link object misses the support for onClientClick through the tag lib, see hbj:link without onClientClick ? and OnClientClick Event for Link HTMLB Component for similiar problems and workarounds.
With this workaround, you can call for example an AbstractPortalComponent, implement doOnNodeReady (with an empty doContent method) and return the PDF, settings the content type on the http before etc.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.

In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library

Third party application for Intel-based iMac

Greetings y'all...anybody out there know of a list of third party apps for Intel-based Macs???

Try Apple's Made4Mac area for universal applications which are built for Intel and Power PC:
http://guide.apple.com/universal/
Although I must admit Versiontracker is very good too.

C# application for time based licensing

Hello Everyone,
We are developing some content based applications in C#, this would be licensed to clients for a specified duration of time and the code should be robust enough to track time. Since majority of our customers would not be accessible to internet it would be
impossible for us to track time or handle situations where clients might change system time.
Need opinion on how to proceed on this.
Regards
Suresh Sharma

You can not track time properly without having internet access at least once in a while. The only other solution is to literally hack into your clients machine and prevent time changes by some sort of background service which will get you into all sort of
trouble, not to mention it's most probably illegal.
Best licensing model is the one that checks for internet access at least once a month or every couple of months. If you have to do it with no internet access at all -I don't know what type of stone age architecture your clients might run, if it's about security
have they heard of VPN, firewalls, and stuff like that?!!-, then your best choice is to count the number of times your application has run and stored that in an encrypted file in the filesystem. This way you're completely isolated from a reliable source of
time tracking, and still can limit the use to your software.
http://nader.elshehabi.com

ECATT for ITS based applications

Similar Messages

Maybe you are looking for