ECATT questions regarding handling multiple line items in test data conatin
Hi all,
We are using ECATT for automation.
We do have a query .
The Question is
When we have
Ist level Header information [One entry per header]
IInd level Item Level information [Per Header Multiple item entries is possible]
For eg.
Header
Sales ordno Customer
S001 C001
Item
Salesordno itemNo Material
S001 001 M001
S001 002 M002
We need to call an API for creating the salesorder using ECATT .We want to achieve the same with test data container.
How we can approach this?
Reg,
Ganesh
Message was edited by:
GaneshKumar P
hi,
you can do that by using ABAP...ENDABAP statement.
By using this command you can write any ABAP login in between.
and u can also call RFC's, BAPI in between.
all you need to do is wirte your ABAP code in se38 and make sure that its working fine. then copy ur code to ecatt tool and pleace that in between ABAP...ENDABAP statements.
hope this helps.
>>reward if this helps.
regards,
kvr
Similar Messages
-
How to handle multiple line items in lsmw
hi all,
how can i handle multiple line items in lsmw either by using direct input method or BDC recording.
first preference is Bdc recording in lsmw . can u tell me the steps in detail.
thanks,
harini.cHi Harini,
Check this link.
BDC - Header with multiple line items.
Regards,
Arun -
Hi all,
I wana pass multiple line items thru bdc me21n....can any1 please help me .if u guys have some code can mail me at [email protected] will be rewarded.
my code below is not working for passing multiple items.
report y1_po_test
no standard page heading line-size 255.
tables: mara,
lfa1,
eina,
eine,
eban,
zdrgsah, zdrgsap,
zdrgsup,
t100,
ekko,
a004, zprice_grpsal, mvke.
*Internal Table to get the input Data
data: begin of i_input occurs 0,
matnr like ekpo-matnr,
asqty like ekpo-menge,
ebeln like ekpo-ebeln,
posnr(5),
posnr like zdrgsap-posnr,
invno like zdrgsap-invno,
invdt like zdrgsah-invdt,
netpr like zdrgsap-netpr,
cntno like zdrgsap-cntno,
shcnm like zdrgsah-shcnm,
apcno like zdrgsap-apcno,
spcno like zdrgsap-spcno,
werks like ekpo-werks,
lgort like ekpo-lgort,
matkl like ekpo-matkl,
pack(10),
mvgr2 like mvke-mvgr2,
dpric type p decimals 6 ,
gpric type p decimals 6,
end of i_input.
data: begin of i_inputxt occurs 0,
matnr(18) ,
asqty(13) ,
ebeln(10) ,
posnr(6) ,
invno(10) ,
invdt(8) ,
netpr(11) ,
cntno(11) ,
shcnm(10) ,
werks(4) ,
lgort(4) ,
matkl(9) ,
pack(10),
end of i_inputxt.
data: begin of i_error occurs 0,
prnum like eban-banfn,
pritm like eban-bnfpo,
inmat like mara-matnr,
prmat like mara-matnr,
asqty like zdrgsap-asqty,
prqty like eban-menge,
remak(100),
remark(255) type c,
end of i_error.
data : begin of i_error1 occurs 0,
prnum like eban-banfn,
pritm like eban-bnfpo,
asqty like zdrgsap-asqty,
prqty like eban-menge,
remak(100),
end of i_error1.
data : begin of i_zsap occurs 0,
ebeln like zdrgsap-ebeln,
posnr(5),
menge like zdrgsap-menge,
asqty like zdrgsap-asqty,
end of i_zsap.
data : v_ebeln like eket-ebeln.
data : begin of i_a004 occurs 0,
matnr like a004-matnr,
knumh like a004-knumh,
kbetr like konp-kbetr,
end of i_a004,
i_a0041 like i_a004 occurs 0 with header line.
data : begin of i_konp occurs 0,
knumh like konp-knumh,
kbetr like konp-kbetr,
konwa like konp-konwa,
end of i_konp.
data : begin of i_konp1 occurs 0,
knumh like konp-knumh,
kbetr like konp-kbetr,
konwa like konp-konwa,
end of i_konp1.
data : begin of i_netpr occurs 0,
ebeln like eket-ebeln,
ebelp like eket-ebelp,
matnr like ekpo-matnr,
menge like ekpo-menge,
netpr like ekpo-netpr,
kbetr like konp-kbetr,
end of i_netpr.
data : begin of i_grpsal occurs 0,
pcode like zprice_grpsal-pcode,
fact like zprice_grpsal-fact,
wfact like zprice_grpsal-wfact,
end of i_grpsal.
data : begin of i_domsal occurs 0,
pcode like zprice_grpsal-pcode,
fact like zprice_grpsal-fact,
wfact like zprice_grpsal-wfact,
end of i_domsal.
data : begin of i_zsap1 occurs 0,
ebeln like zdrgsap-ebeln,
posnr(5),
asqty like zdrgsap-asqty,
end of i_zsap1.
data: begin of bdcdata occurs 0.
include structure bdcdata. " Batch input: New table field
data: end of bdcdata.
messages of call transaction
data: messtab like bdcmsgcoll occurs 0 with header line.
data: i_mara type mara occurs 0 with header line,
i_eina like eina occurs 0 with header line,
i_eine like eine occurs 0 with header line.
data : begin of i_inferr occurs 0,
matnr like eina-matnr,
infnr like eina-infnr,
werks like eine-werks,
end of i_inferr.
data : begin of i_inferrc occurs 0,
matnr like eina-matnr,
end of i_inferrc.
*Data declaration.
data: v_file type string, " Variable for uploading file
v_item(5) type c, " Line item number
v_itno(2) type n,
p_wkurs like zdrgkurs-wkurs,
v_matnr(20) type c,
v_menge(20) type c,
v_banfn(20) type c,
v_bnfpo(20) type c,
v_bednr(20) type c,
v_werks(20),
p_lifnr(10) ,
v_flag,
p_lifnrtxt(10),
p_wkurstxt(9),
p_bsartxt(4),
v_posnr(5), n type i,
v_quant(13),
v_asqty(13),
v_prqty(13),
v_apcno(6),
v_spcno(4),
v_itm(11),
v_cnt type i,
v_cntno(4),
v_pack(10),
v_order(15),
v_lifnr(10),
v_invdt like sy-datum,
v_waers like ekko-waers,
v_podat like ekko-bedat,
v_docdt1 like sy-datum,
v_docdt(10),
v_fnam(132).
data : begin of i_test occurs 0,
bnfpo like eban-bnfpo,
matnr like eban-matnr,
menge like eban-menge,
bsmng like eban-bsmng,
end of i_test.
data : begin of i_mvke occurs 0,
matnr like mvke-matnr,
mvgr2 like mvke-mvgr2,
end of i_mvke.
data : begin of i_invno,
ebeln like ekko-ebeln,
angnr like ekko-angnr,
end of i_invno.
data : i_final like zinvdiff occurs 0 with header line.
Constants
constants : c_pd01 like eine-werks value 'PD01'.
*Selection Screen Declarations
selection-screen begin of block b1 with frame title text-010.
parameters: p_invno like zdrgsah-invno obligatory,
p_bsart like ekko-bsart obligatory.
selection-screen end of block b1.
start-of-selection.
To Upload the data into Internal table.
perform f_upload_data.
To Validate the input data.
perform f_check_data.
if i_error[] is not initial or i_error1[] is not initial.
To display the error message
perform f_display_errors.
else.
To create PO
perform f_process_session.
endif.
perform f_check_calc_price.
perform f_display_data.
perform f_update_zinvdiff.
*& Form f_get_filename
text
form f_get_filename.
endform. " F_get_filename
*& Form f_upload_data
form f_upload_data .
select matwa as matnr asqty ebeln posnr b~invno invdt netpr cntno
shcnm apcno spcno into table i_input
from zdrgsah as a join zdrgsap as b on
a~invno = b~invno
where b~invno eq p_invno.
select ebeln
posnr
menge
asqty
from zdrgsap into table i_zsap
where invno = p_invno.
loop at i_zsap.
concatenate i_zsap-posnr(4) '0' into v_posnr.
i_zsap1-ebeln = i_zsap-ebeln.
i_zsap1-posnr = v_posnr.
i_zsap1-asqty = i_zsap-asqty.
collect i_zsap1.
clear i_zsap1.
endloop.
delete adjacent duplicates from i_zsap comparing posnr menge .
delete adjacent duplicates from i_input comparing ebeln posnr.
loop at i_input.
p_werks = i_input-werks.
v_invdt = i_input-invdt.
call function 'CONVERT_DATE_FORMAT'
exporting
i_date = v_invdt
importing
e_calc_date = v_invdt.
if i_input-apcno is initial.
v_apcno = '0000'.
else.
v_apcno = i_input-apcno.
endif.
if i_input-spcno is initial.
v_spcno = '0000'.
else.
v_spcno = i_input-spcno.
endif.
if i_input-cntno is initial.
i_input-cntno = '0000'.
endif.
concatenate v_apcno v_spcno into i_input-pack.
concatenate v_pack v_cntno into v_order separated by '-'.
i_input-order = v_order.
clear : v_itm, v_cnt, v_cntno, v_pack, v_apcno, v_spcno, v_order.
concatenate i_input-posnr(4) '0' into v_posnr.
select single lifnr into p_lifnr from zdrgsup
where shcnm = i_input-shcnm.
v_lifnr = p_lifnr.
if sy-subrc <> 0.
message e000(zcnc) with text-002.
endif.
select single * from eban
where banfn eq i_input-ebeln
and bnfpo eq v_posnr.
if sy-subrc eq 0.
move eban-werks to i_input-werks.
move eban-lgort to i_input-lgort.
move eban-matkl to i_input-matkl.
move eban-bnfpo to i_test-bnfpo.
move eban-matnr to i_test-matnr.
move eban-menge to i_test-menge.
move eban-bsmng to i_test-bsmng.
modify i_input.
if not i_input-matnr eq i_test-matnr.
move i_input-ebeln to i_error-prnum.
move v_posnr to i_error-pritm.
move i_input-matnr to i_error-inmat.
move eban-matnr to i_error-prmat.
i_error-remak = 'Material does not match'.
append i_error.
clear i_error.
endif.
v_quant = i_test-menge - i_test-bsmng.
read table i_zsap1 with key ebeln = i_input-ebeln posnr = v_posnr.
if not i_zsap1-asqty <= v_quant.
move i_input-ebeln to i_error1-prnum.
move i_zsap1-posnr to i_error1-pritm.
move i_zsap1-asqty to i_error1-asqty.
move eban-menge to i_error1-prqty.
move v_quant to i_error1-prqty.
i_error1-remak = 'Material Quantity does not match'.
append i_error1.
clear i_error1.
endif.
select single matnr infnr from eina
into corresponding fields of i_eina
where matnr eq i_input-matnr
and lifnr eq p_lifnr.
if sy-subrc = 0.
append i_eina.
check not i_eina[] is initial.
select single * from eine
into i_eine
where infnr eq i_eina-infnr
and werks eq eban-werks.
if sy-subrc <> 0.
move i_input-matnr to i_inferr-matnr.
move i_eina-infnr to i_inferr-infnr.
move eban-werks to i_inferr-werks.
append i_inferr.
clear i_inferr.
endif.
else.
move i_input-matnr to i_inferrc-matnr.
append i_inferrc.
clear i_inferrc.
endif.
clear : i_eina, i_eine.
clear : i_zsap, i_zsap1, i_input, v_posnr,
v_quant, i_test.
endif.
endloop.
delete adjacent duplicates from i_error1 comparing prnum pritm.
perform chk_info_rec.
endform. " f_upload_data
*& Form f_check_data
form f_check_data .
if not i_input[] is initial.
select * from mara
into table i_mara
for all entries in i_input
where matnr eq i_input-matnr.
endif.
loop at i_mara.
read table i_input with key matnr = i_mara-matnr.
if sy-subrc <> 0.
write : 'Following Part Numbers are not found in MARA'.
write : / i_input-matnr.
endif.
endloop.
if i_mara[] is initial.
loop at i_input.
format color col_heading intensified off.
write : 'Following Part Numbers are not found in MARA'.
format color col_normal intensified off.
write : / i_input-matnr.
endloop.
endif.
select single wkurs into p_wkurs from zdrgkurs
where invno = p_invno.
if sy-subrc ne 0.
message e000(zcnc) with text-s11.
endif.
call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
exporting
input = p_lifnr
importing
output = p_lifnr.
p_lifnrtxt = p_lifnr.
p_wkurstxt = p_wkurs.
p_bsartxt = p_bsart.
loop at i_input.
move-corresponding i_input to i_inputxt.
append i_inputxt.
endloop.
select single ebeln
angnr from ekko
into i_invno
where angnr = p_invno.
if sy-subrc = 0.
perform display_err.
endif.
endform. " f_check_data
*& Form f_process_session
text
form f_process_session.
v_docdt1 = sy-datum.
write v_docdt1 to v_docdt using edit mask '__.__.____'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEDOCTYPE'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_TOPLINE-BSART'.
perform bdc_field using 'MEPO_TOPLINE-BSART'
p_bsartxt.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MEPO_TOPLINE-SUPERFIELD'
p_lifnrtxt.
perform bdc_field using 'BDC_CURSOR'
'MEPO1222-BUKRS'.
perform bdc_field using 'MEPO1222-EKORG'
'SBAP'.
perform bdc_field using 'MEPO1222-EKGRP'
'PG1'.
perform bdc_field using 'MEPO1222-BUKRS'
'SBA'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=TABHDT2'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MEPO_TOPLINE-BSART'
p_bsartxt.
perform bdc_field using 'MEPO_TOPLINE-SUPERFIELD'
p_lifnrtxt.
********************conditions***************************************
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(08)'.
perform bdc_field using 'KOMV-KSCHL(07)'
'zot1'.
perform bdc_field using 'KOMV-KSCHL(08)'
'zinc'.
perform bdc_field using 'KOMV-KSCHL(09)'
'ziv1'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=V69A_KOAN'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(01)'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KOMV-KSCHL(02)'
'zca1'.
perform bdc_field using 'KOMV-KSCHL(03)'
'zfa1'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=TABHDT7'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(09)'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1229-IHRAN'.
perform bdc_field using 'MEPO1229-ANGNR'
p_invno.
perform bdc_field using 'MEPO1229-IHRAN'
v_invdt.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEV4001BUTTON'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1229-IHRAN'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEV4000BUTTON'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1229-IHRAN'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
loop at i_inputxt.
concatenate i_inputxt-posnr(4) '0' into v_posnr.
concatenate 'MEPO1211-EMATN(' v_itno ')' into v_matnr.
concatenate 'MEPO1211-MENGE(' v_itno ')' into v_menge.
concatenate 'MEPO1211-BANFN(' v_itno ')' into v_banfn.
concatenate 'MEPO1211-BNFPO(' v_itno ')' into v_bnfpo.
concatenate 'MEPO1211-BEDNR(' v_itno ')' into v_bednr.
concatenate 'MEPO1211-WERKS(' v_itno ')' into v_werks.
v_item = v_item + 10.
endif.
v_itno = v_itno + 1.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
v_matnr.
perform bdc_field using v_matnr "'MEPO1211-EMATN(01)'
i_inputxt-matnr.
perform bdc_field using v_menge "'MEPO1211-MENGE(01)'
i_inputxt-asqty.
perform bdc_field using v_banfn "'MEPO1211-BANFN(01)'
i_inputxt-ebeln.
perform bdc_field using v_bnfpo "'MEPO1211-BNFPO(01)'
i_inputxt-posnr.
perform bdc_field using 'DYN_6000-LIST'
v_itno.
loop at i_inputxt .
v_itno = sy-tabix.
clear v_fnam.
concatenate 'MEPO1211-EMATN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-matnr.
clear v_fnam.
concatenate 'MEPO1211-MENGE(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-asqty.
clear v_fnam.
concatenate 'MEPO1211-BANFN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-ebeln.
clear v_fnam.
concatenate 'MEPO1211-BNFPO(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-posnr.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endloop.
loop at i_inputxt from 6.
v_itno = sy-tabix.
clear v_fnam.
concatenate 'MEPO1211-EMATN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-matnr.
clear v_fnam.
concatenate 'MEPO1211-MENGE(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-asqty.
clear v_fnam.
concatenate 'MEPO1211-BANFN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-ebeln.
clear v_fnam.
concatenate 'MEPO1211-BNFPO(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-posnr.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endloop.
perform bdc_field using 'BDC_CURSOR'
'MEPO1320-SLFDT(01)'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=TABHDT2'.
perform bdc_field using 'DYN_6000-LIST'
' 2'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=V69A_KOAK'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KBETR(05)'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHECKDOC'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(01)'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR'
'04/03'.
perform bdc_field using 'BDC_OKCODE'
'=&ONT'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEV4000BUTTON'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_TOPLINE-BSART'.
perform bdc_field using 'DYN_6000-LIST'
' 2'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KBETR(08)'.
perform bdc_field using 'KOMV-KBETR(03)'
' .54'.
perform bdc_field using 'KOMV-KBETR(08)'
' .54'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1211-NETPR(01)'.
perform bdc_transaction using 'ME21N'.
endform. "f_process_session
*& Form bdc_transaction
text
-->P_0464 text
form bdc_transaction using tcode.
data: l_mstring(480).
data: l_subrc like sy-subrc.
data: v_mode type c.
v_mode = 'A'.
refresh messtab.
call transaction tcode using bdcdata
mode v_mode
update 'S'
messages into messtab.
l_subrc = sy-subrc.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
loop at messtab.
select single * from t100 where sprsl = messtab-msgspra
and arbgb = messtab-msgid
and msgnr = messtab-msgnr.
if sy-subrc = 0.
l_mstring = t100-text.
if l_mstring cs '&1'.
replace '&1' with messtab-msgv1 into l_mstring.
replace '&2' with messtab-msgv2 into l_mstring.
replace '&3' with messtab-msgv3 into l_mstring.
replace '&4' with messtab-msgv4 into l_mstring.
else.
replace '&' with messtab-msgv1 into l_mstring.
replace '&' with messtab-msgv2 into l_mstring.
replace '&' with messtab-msgv3 into l_mstring.
replace '&' with messtab-msgv4 into l_mstring.
endif.
condense l_mstring.
if messtab-msgtyp eq 'E' or messtab-msgtyp eq 'W'.
write: / messtab-msgtyp, l_mstring(250).
endif.
search l_mstring for 'SEA'.
if sy-subrc = 0.
write: / messtab-msgtyp, l_mstring(250).
endif.
else.
write: / messtab.
endif.
endloop.
endform. " bdc_transaction
Start new screen *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform. "BDC_DYNPRO
Insert field *
form bdc_field using fnam fval.
if fval <> space.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endif.
endform. "BDC_FIELD
*& Form f_display_errors
form f_display_errors .
if i_error[] is not initial.
format color col_heading intensified off.
uline .
write :/ 'PR No ',
(10) 'Item No',
(20) 'PR Part No',
(30) 'Invoiced Part No',
(60) 'Remark'.
uline .
loop at i_error.
perform f_display_color.
write :/ i_error-prnum,
(10) i_error-pritm ,
(20) i_error-prmat,
(30) i_error-inmat,
(60) i_error-remak.
clear i_error.
endloop.
endif.
if i_error1[] is not initial.
format color col_heading intensified off.
uline .
write :/ 'PR No ',
(10) 'Item No',
(20) 'PR Quantity',
(30) 'Invoiced Quantity',
(60) 'Remark'.
uline .
loop at i_error1.
perform f_display_color.
if not i_error1-asqty is initial.
v_asqty = i_error1-asqty .
v_prqty = i_error1-prqty.
write :/ i_error1-prnum,
(10) i_error1-pritm ,
(20) v_prqty,
(30) v_asqty,
(60) i_error1-remak.
clear : v_asqty, v_prqty.
endif.
clear i_error1.
endloop.
endif.
endform. " f_display_errors
*& Form f_display_color
form f_display_color .
if v_flag = 0.
format color col_normal intensified on.
v_flag = 1.
elseif v_flag = 1.
format color col_normal intensified off.
v_flag = 0.
endif.
endform. " f_display_color
*& Form display_err
text
--> p1 text
<-- p2 text
form display_err .
format color col_heading intensified off.
write (120) text-006.
uline .
write : 'PR No ',
(15) 'Invoice No',
(30) 'Remark'.
uline.
format color col_negative intensified off.
write :/ i_invno-ebeln,
(15) p_invno ,
(30) 'Invoice Already Exists'.
endform. " display_err
*& Form f_check_calc_price
text
--> p1 text
<-- p2 text
form f_check_calc_price .
data : d_pric type p decimals 6 ,
g_pric type p decimals 6,
v_exch type p decimals 4 value '0.1049'.
select single ebeln
waers
bedat
from ekko into (v_ebeln , v_waers , v_podat)
where angnr eq p_invno.
loop at i_input.
concatenate i_input-posnr(4) '0' into v_posnr.
select single p~ebeln
p~ebelp
matnr
p~menge
netpr
into i_netpr
from eket as t inner join ekpo as p
on t~ebeln eq p~ebeln
and t~ebelp eq p~ebelp
where t~ebeln eq v_ebeln
and t~banfn eq i_input-ebeln
and t~bnfpo eq v_posnr.
if v_waers eq 'JPY'.
i_netpr-netpr = i_netpr-netpr * 100.
endif.
if not i_input-netpr eq i_netpr-netpr.
append i_netpr.
clear : i_input, i_netpr, v_posnr.
else.
clear : i_input, i_netpr, v_posnr.
endif.
endloop.
delete adjacent duplicates from i_netpr comparing ebeln ebelp matnr.
modify zinvdiff from table i_final.
if i_netpr[] is not initial.
select matnr
knumh
from a004
into table i_a004
for all entries in i_netpr
where matnr = i_netpr-matnr
and kschl = 'ZPR0'
and vkorg = 'SBAP'
and vtweg = 'DD'
and ( datab <= sy-datum and datbi => sy-datum ).
select matnr
knumh
from a004
into table i_a0041
for all entries in i_netpr
where matnr = i_netpr-matnr
and kschl = 'ZPR0'
and vkorg = 'EXPT'
and vtweg = 'BR'
and ( datab <= sy-datum and datbi => sy-datum ).
select matnr mvgr2 from mvke
into corresponding fields of table i_mvke
for all entries in i_netpr
where matnr = i_netpr-matnr
and vkorg = 'SBAP'
and vtweg = 'DD'.
if i_a004[] is not initial.
select knumh
kbetr
from konp
into table i_konp
for all entries in i_a004
where knumh = i_a004-knumh.
loop at i_a004.
read table i_konp with key knumh = i_a004-knumh.
i_konp-kbetr = i_konp-kbetr / 10.
move i_konp-kbetr to i_a004-kbetr.
modify i_a004.
clear : i_konp, i_a004.
endloop.
endif.
if i_a0041[] is not initial.
select knumh
kbetr
from konp
into table i_konp1
for all entries in i_a0041
where knumh = i_a0041-knumh.
loop at i_a0041.
read table i_konp1 with key knumh = i_a0041-knumh.
move i_konp1-kbetr to i_a0041-kbetr.
modify i_a0041.
clear : i_konp1, i_a0041.
endloop.
endif.
if i_mvke[] is not initial.
select pcode
fact
wfact
into table i_domsal
from zprice_grpsal
for all entries in i_mvke
where pcode = i_mvke-mvgr2
and vkorg = 'SBAP'
and vtweg = 'DD'
and lifnr = v_lifnr.
select pcode
fact
wfact
into table i_grpsal
from zprice_grpsal
for all entries in i_mvke
where pcode = i_mvke-mvgr2
and vkorg = 'EXPT'
and vtweg = 'BR'
and lifnr = v_lifnr.
endif.
loop at i_input .
read table i_mvke with key matnr = i_input-matnr.
if sy-subrc = 0.
move i_mvke-mvgr2 to i_input-mvgr2.
endif.
read table i_domsal with key pcode = i_input-mvgr2.
if sy-subrc = 0.
d_pric = i_domsal-fact / i_domsal-wfact.
i_input-dpric = i_input-netpr * d_pric * ( 112 / 100 ).
endif.
read table i_grpsal with key pcode = i_input-mvgr2.
if sy-subrc = 0.
g_pric = i_grpsal-fact * i_grpsal-wfact.
i_input-gpric = ( i_input-netpr * ( 112 / 100 ) ) / g_pric .
endif.
modify i_input.
clear i_input.
clear d_pric.
clear g_pric.
endloop.
endif.
endform. " f_check_price
*& Form f_display_data
text
--> p1 text
<-- p2 text
form f_display_data .
loop at i_netpr.
move i_netpr-ebeln to i_final-ebeln.
move i_netpr-ebelp to i_final-ebelp.
move i_netpr-matnr to i_final-matnr.
move i_netpr-netpr to i_final-poprc.
move i_netpr-menge to i_final-asqty.
move p_invno to i_final-invoice.
append i_final.
clear i_final.
endloop.
loop at i_final.
move v_podat to i_final-podat.
read table i_input with key matnr = i_final-matnr.
move i_input-netpr to i_final-invpr.
move i_input-dpric to i_final-dcalclp.Dear Santosh,
I haven't gone through your piece of code.
But I can suggest a way out, while handling multiple line-items.
The following code sample elucidate the use of multiple line-items. This is just an example for your understanding.
FORM BDC_OPERATION .
DATA: LV_ARBPL(15) TYPE C,
LV_ROWNO(2) TYPE N.
LOOP AT IT_TABDATA INTO WA_TABDATA.
CLEAR: LV_ARBPL
LV_ROWNO = SY-TABIX.
CONCATENATE 'PLPOD-ARBPL' '(' LV_ROWNO ')' INTO LV_ARBPL.
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '1400'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' LV_ARBPL.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=PICK'.
PERFORM BDC_FIELD USING LV_ARBPL WA_TABDATA-ARBPL.
ENDLOOP.
ENDFORM. " BDC_OPERATION
Regards,
Abir
Please don't forget to award points * -
Secatt Recording Multiple line items
Hi all,
Iam new to secatt.
Iam having couple of doubts:
1) We having the scenerios :Creating script for Purchase,Order. P.O had multiple line item's.I want to creat the script for P.O ,that should work for all line items,each line items had deliery schedule date's
(The scripts should work for Multiple line items and schedule dates )
2) How to link the transactions
( Eg: In one scripts : creating P.O > Gr Migo > invoice )
Is it possible?.If its possible pls guide me.I would appriciate, If any input.
Regards,
Hareesha kHi Hareesha,
I don't have any document particularly to this but you can refer to SAP standard eCATT documentation on http://help.sap.com/saphelp_erp2004/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm.
In case of any specific doubts you can write to me. I am also working on eCATTs.
Best regards,
Deepthi -
Create ecatt script for one sales order creation with multiple line items
Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
TaranumHi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh -
How to handle the multiple line items in the Inbound idoc FM
Hi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
BharaniHi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
Bharani -
Hi Gurus,
i am creating ecatt with TCD recording. My requirement is if i record a sales order with one line item can i use the same ecatt for multiple line items.
for example if i create a test script z_va01 in this i record a sales order having one line item. For this i created test data and configaration. Can i use same ecatt to create a sales order having multiple line items.
Thanks in advace
anilHi guys,
I know it has been a long time since this thread was opened, but I'm facing with the same problem.
I created the sales order with SAPGUI REC, and added a loop for line item creation and schedule line creation.
*LINE ITEM NUMBER
DO ( V_LNIT_NO ).
SAPGUI ( VA02_2010_STEP_2 ). --> Adding line item
V_LI_ROW = V_LI_ROW + 1.
ENDDO.
And i amended the line item selection Guielement ID - (Changes are in bold)
'wnd[0]/usr/tabsTAXI_TABSTRIP_OVERVIEW/tabpT\02/ssubSUBSCREEN_BODY:SAPLJ3AD:2930/ssubSUBITEM_L2:SAPMJ3AS:2001/tblSAPMJ3ASTCTRL_LINE_ENTRY/ctxtJ_3ASZDI-MATNR[3,<!V_LI_ROW!>]'
so that the loop will make the line item selection to the next line.
My requirement is to upload the data through a excel file, so I created a test configuration with the relevant variables. But the data from the excel line wont populate the loop data, it only repeats the data from the same line over and over again.
How can I fix this? Please help.
Ps - I have tried to make the the MATNR_D to a table by adding [], --> MATNR_D[] - Table. And it becomes a <INITIAL>, and by clicking on the value column cell, it goes in to parameter I_MATNR (I defined this)
and you can add Parameter 1, 2, 3 etc and within the parameter you can add table-line. I read that this is the solution but, the variable is not recorded on the excel sheet as a column. Please help -
Single/ Consolidated GR/IR entry for a PO having multiple line items
Hi,
In a PO there are couple of line items for materials of similar type and class. While making the Goods Receipt, the Accounting Document is making two no of line items for GR/IR accounts as credit and two no of inventory accounts as debit. Same is happening to GR/IR account while making Invoice Receipt document also.
Informatively, both the materials above have been assigned to one GR/IR account in the OBYC table.
My question is, is it possible to consolidate the value of both these materials and post one line item for GR/IR account. This is required as in our case in a PO, normally, we do have multiple line items and hence it is resulting multiple no of GR/IR and inventory accounts in a single accounting document. As we are getting details of the line item from PO history, we do not require it in the accounting document.
Requested to kindly help.
Regards
B.MohantyHi
This is not possible (you will compleet los the link between the Invoice and GR)
The reason is that when you receive an invoice that this is based on a G/R line and the way arround when you receive first the invoice(s).
The system need this for the automatecly clearing from the G/R - I/R account, that is based on PO an PO line item number. -
Copying the item text in case of multiple line items
Hi All,
I have a scenario where the sales order gets created in our SAP through a 850 idoc. The incoming idoc has only one item segment which carries the total order quantity ( for example say 1000). Since my company has contractual agreements with the end customer for doing multiple shipments , our sales department splits the total quantity into multiple line items in the sales order. Say splitting the 1000 quantities into 5 line items of 200 each.
The problem here is that when the sales order got created , all the related item text were copied only to the first line item ( of 1000 qty) and which is standard SAP. Since the order quantity was manually split, the related item text are not carried to the subsequent line items. The issue comes when an outbound (810) idoc is sent to customer . As I told earlier since only the first line item has the item text , the 810 idoc which was created for the first line item only has the item text . The rest of the 810 which were subsequently created for multiple shipments/invoices on different dates didn't have the item text in the 810's. This is becoming a major problem as the 810 files are failing at our trading partners end because of missing text.
Now my question is, Is there a way that I can make the item text copy automatically when multiple line items are created manually by business. Like is there a way where I can modify MV45AFZZ to copy the item text in their respective segemnts ( z003,z004 etc) to "N" number of line items.
Also please suggest if there is a better way of doing it. Suggstions are most welcome !!!.
Regards
AmrithHi,
First of all try to avoid doing select into corresponding fields. THis would improve the performance of the program.
Try to do a single fetch from the BSIS table . fetch the hkont, belnr, dmbtr fields in to a master internal table. Manipulate and play with the data as required. Don't hit the data base table more than once (unless it is required) . This would improve the performance of your code.
Try to code this way.
types: begin of ty_bsis,
hkont type hkont,
belnr type belnr_d,
dmbtr type dmbtr,
end of ty_bsis.
data: it_bsis type standard table of ty_bsis,
wa_bsis type ty_bsis,
select hkont belnr dmbtr
from bsis
into table it_bsis
WHERE HKONT IN S_RACCT
AND PRCTR IN P_PRCTR
AND MONAT IN S_POPER
AND BUKRS EQ P_BUKRS
AND GJAHR EQ P_GJAHR
AND PRCTR IN S_PRCTR.
Using the data availabe in the it_bsis, you can manipulate as required.
Hope this would be helpful
Regards
Ramesh Sundaram -
Pls help me to create SO using BDC for multiple line items (VA01)
Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-AUART'
'ZOR'.
perform bdc_field using 'VBAK-VKORG'
'2000'.
perform bdc_field using 'VBAK-VTWEG'
'10'.
perform bdc_field using 'VBAK-SPART'
'05'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(01)'
' 10'.
perform bdc_field using 'RV45A-KWMENG(01)'
' 55'.
perform bdc_field using 'VBAP-WERKS(01)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.2'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1200'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(05)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(02)'.
perform bdc_field using 'RV45A-MABNR(02)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(02)'
' 11'.
perform bdc_field using 'RV45A-KWMENG(02)'
' 66'.
perform bdc_field using 'VBAP-WERKS(02)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.1'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1250'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(05)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(01)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'FDGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(02)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(02)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'GFGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSEX'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'5'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=KKAU'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\02'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-KONDA'.
perform bdc_field using 'VBAK-AUDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-VKBUR'
'IN15'.
perform bdc_field using 'VBAK-WAERK'
'INR'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-KDGRP'
'CF'.
perform bdc_field using 'VBKD-PLTYP'
'01'.
perform bdc_field using 'VBKD-KONDA'
'01'.
perform bdc_field using 'VBKD-BZIRK'
'NORTH'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-VSART'.
perform bdc_field using 'VBAK-VSBED'
'01'.
perform bdc_field using 'VBKD-KZAZU'
'X'.
perform bdc_field using 'VBKD-VSART'
'ER'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\05'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-TAXK1'
'1'.
perform bdc_field using 'VBAK-TAXK3'
'l'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-ZLSCH'.
perform bdc_field using 'VBKD-KTGRD'
'01'.
perform bdc_field using 'VBKD-ZLSCH'
'c'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'BDFBFDB'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\11'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=KSTC'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(02)'.
perform bdc_field using 'J_STMAINT-ANWS(01)'
perform bdc_field using 'J_STMAINT-ANWS(02)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(03)'.
perform bdc_field using 'J_STMAINT-ANWS(02)'
perform bdc_field using 'J_STMAINT-ANWS(03)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(04)'.
perform bdc_field using 'J_STMAINT-ANWS(03)'
perform bdc_field using 'J_STMAINT-ANWS(04)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'BDC_CURSOR'
'JOSTD-OBJNR'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-TXT_VBELN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART :Order Type
VBAK-VKORG : Sales Org
VBAK-VTWEG : Distri Channel
VBAK-SPART : Division
VBAK-KUNNR : Sold-to-Party
VBPA-KUNNAR : Ship-to-Party
VBAK-BSTNK : PO No
VBAK-BSTDK : PO Date
VBAP-MATNR : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG : Qty
VBAP-WERKS : Delivery Plant
VBKD-INCO2 : Incoterm2
VBKD-KONDA : Price Group
VBKD-VSART : Shipping Type
VBAK-TAXK1 : Cust Tax-1
VBAK-TAXK2 : Cust Tax-2
VBAK-TAXK3 : Cust Tax-3
VBAK-TAXK4 : Cust Tax-4
VBKD-ZLSCH : Payment Method
VBAP-TAXM1 : Mat tax clss-1
VBAP-TAXM2 : Mat tax clss-2
VBAP-TAXM3 : Mat tax clss-3
VBAP-TAXM4 : Mat tax clss-4
VBAP-POSEX : IMPS Order No
VBKD-BSTKD_E : old SO in 4.6c
VBKD-POSEX_E : old SO Item in 4.6c
Text Id : TDC No
Text Id-ES10 : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192, 1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
Pls help me this is urgent requirement.
[email protected]
Thanks & Regards,
J.LokeshIf u want to add Items data, u have to handle the Table control by writing the complete code.
U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
Narendra -
Bdc sales order multiple line items
hi friends,
i prepare multiple sales orders multiple line items through single flat file
in bdc program.
i know information about ...
H
I
I
I
BUT my problem is
H
I
I
H1
I
I
H2
I
I
how will develop this code?George Bush,
Answer fir this question is, you need to do basic ABAP Training.
Search for SAP ABAP Training Courses.
You need to build logic in you program by defining appropriate internal table and use loop events to build BDC. BDC is old style of programming. I would advice you to use BAPI with immediate order processing.
If you want BDC, you can also try to use LSMW by defining appropriate inbound data structures.
If you need help let me know.
Thanks & Regards,
Mahesh Apte -
Production order from sales order with multiple line item(for one material)
Dear Gurus,
I am working in MTO scenarios. If there is several line item in a sales order for one material, multiple production order( same as no. of sales order line item) is getting created against each of the line item.My requirement is,since the material code is same in each line item and sales order is one, one production order should be generated for all line item. please tell me how to do it.
(Here for one material, multiple line item is required for some specific reason)
Regards
Rajib PathakHi,
This is not possible.
In Std SAP will create one production order for one sales order. The stock is also allocated to thet particular sales order only. Because each and every sales order may vary in any one of the parameters. Considering this, SAP has designed like this.
Regards,
V. Suresh -
MM: PO Not Picking up PR Having Multiple Line Items
Hi All,
When Creating PO with Reference to PR Having multiple line items, not picking up the line items and also the vendor and also the where in we have to select input tax code.
CASE1: Created PR 760001340 with single line item and also could able to create PO.
Case2: Created PR 760001341 with multiple line items, When creating PO with reference to PR the line items and Vendor are not picking Up.
Plz. Advise a solution.
Thanks in Advance.....
Regards
SudheerHI SHWN,
Thanks for prompt response.
ERROR Message: When referencing a requisition, please also enter a requisition item no.
Regards
Sudheer -
How to Restrict Single Delivery Date for PO with Multiple Line Items
Dear Experts,
How to Restrict Single Delivery Date for PO with Multiple Line Items.
System needs to through Error Message if User Inputs Different Delivery Dates for PO with Multiple Line Items in ME21N Tcode.
Can we achive this by Some Enhancement in SAP or Not ???
If so how to do it.
Any Inputs is highly appreciated.
Thanks and Regards,
Selvakumar. MHi Selvakumar,
we can resrict the PO to have a single delivery date in all the line items by means of giving a error message or overwiting the delivery date keyed/determined in the line item.
You can use the BADI -> ME_PROCESS_PO_CUST. In which you need to implement the method PROCESS_SCHEDULE.
(for technical aid - This method will be called for each and every PO line item, From the imporing parameter im_schedule we can get all the details of current PO line, even we can change the data in the current PO line. )
Regards,
Madhu. -
Creating a PO Using BAPI For Multiple PLants Or Multiple Line Items
Hi All
Can you please suggest me how to create a Purchase Order Using BAPI_PO_Create1 for Multiple Plants Or for Multiple Line items. The Requirement is like the PO is for single material for single vendor but for mulple stores i.e plants
NOte: Suggest me the Creation of PO for MUltiple Line items or for multiple plants Using BAPI . Hope you people will give me the needful.
Regards
Shivakumar BandariHi,
Here is the sample code to do that...
*---> po header data
wa_poheader-vendor = your vendor..
wa_poheader-doc_type = Your doc type..check with Functional contact....
wa_poheader-purch_org = Purchasing Org..
wa_poheader-pur_group = Purchasing Group
*---> po header data (change toolbar)
wa_poheaderx-vendor = 'X'.
wa_poheaderx-doc_type = 'X'.
wa_poheaderx-purch_org = 'X'.
wa_poheaderx-pur_group = 'X'.
*---> poitem data
data: item like ekpo-ebelp.
item = '0010'.
loop at t_parts.
it_poitem-po_item = '00010'.
IT_POITEM-PLANT = Plant..
IT_POITEM-STGE_LOC = Sloc...
*---> poitemx (item data change toolbar)
it_poitemx-po_item = '0010'.
it_poitemx-po_itemx = 'X'.
IT_POITEMX-PLANT = 'X'.
IT_POITEMX-STGE_LOC = 'X'.
*---> add record's to internal table
APPEND: it_poitem,
it_poitemx.
endloop.
*call bapi_po_create1
CLEAR v_ebeln.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_poheader
poheaderx = wa_poheaderx
IMPORTING
exppurchaseorder = v_ebeln
TABLES
return = it_return
poitem = it_poitem
poitemx = it_poitemx.
*---> check the return table for error message
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc NE 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
endif.
Thanks,
Murali
Maybe you are looking for
-
Itunes movies wont play on computer, itunes keeps asking for authorisation
The movies in my itunes will not play on my computer. Itunes continaually asks for computer to be authorised, then once authorised it says that the computer is already authorised then asks for authorisation again. Movies will however play on ipad. An
-
Java code on a customizable jsp
Greetings does anybody know how should i place this code on a template for customizable pages?? <%! String ip=CacheParametrosAplicacion.obtenerInstancia().obtenerDatoParametro("IP_CONTENT_CSS"); String puerto=CacheParametrosAplicacion.obtenerInstanci
-
Hi, Situation: I have a series of data in an arraylist. The user may input several variables and according to these variables, a calculation will be performed on the data in the arraylist. E.g. array = [1 2 3 4 5 6] //fixed variables of which data 1
-
Converting Shared Services (Native) users to MSAD
Hi All, We are on version 9.3.1. We have configured FDM with Shared Services and currently only use native users. This means that our FDM users are all authenticated via HSS. We are just about to configure an MSAD directory and convert native users t
-
Hello, Once I have designed a form in Formscentral and save it as a pdf form, text that I do not want is added. How do I edit this out? Aslo it would be nice to have more control on the vertical placement of the boxes containing radio buttons. Than