ECatt testing through Solution Manager

Hi,
Could anyone please send me the documents for creation of test cases through solution manager?
My email id is: [email protected]
Regards
Karan

Karan,
Did you not check the first thread on the forum; I am a bit unclear if your query is something that the thread did not deal with OR it's just that you haven't read the thread so far.
eCATT Articles On SAP SDN - Series Of 8 Weblogs
Regards,
Srini

Similar Messages

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

Project documentation through solution manager -reg

Hi,
We would like to do project documentation through solution manager
we work on solution manager 2007 with ehp 1
what ever projects we handle like packing for exports etc.. we would like to create them as projects in solution manager and maintain the documentation
request some one to provide step by step guide for the same
regards,
Madhu Kiran

Hi
HAve u seen this
https://websmp210.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
in addition for manual just simply write in Structure tab to create ur folder
Hope it solves ur prb
Regards
Prakhar

Downloading patches through solution manager

Dear all,
Can anybody guide how to download support packs or patches form service market place through solution manager.As the functionality has been restricted at market place.
thanks in advance.
Regards,
Swapnil Lakhe

Hi Swapnil,
"Markus Döhr" wrote in another thread the following. Maybe it helps you going on.
Best regards
Wolfgang
wrote by Markus Döhr----
Go manually to http://service.sap.com/patches and select all you need there and put them in your download basket.
Next start the MO and use the 4.0 system and step forward until you reach "confirm" - you will see all support packages your previously selected and you can confirm. After that you can cancel the maintenance task alltogether and download either directly from your download basked or use the Download Manager.
You need the MO task JUST for confirming them, to select them and put them in your Download basked, nothing is necessary.
Markus

Applying support packs in ECC6.0 through solution manager

Hi,
Can you explain me how we can configure to apply a support pack in ECC 6.0 (Dev, Quality & Production) through solution manager.
For that 4.0 is enough or it should be upgraded to 7.0

Mohammed,
1. First, You have to configure Maintenance Optimizer in Solution Manager.
2. Then create the systems in SMSY.
3. Finally create solution for each system in DSWP, Apply support packages to the systems ECC6.0(DEV, QAS and PRD).
Refer these threads:
    Configure Manintainance optimizer
    UPGRADE SESSIONS: What's SAP Solution Manager Maitenance Optimizer?
These SAP tutors explain in detail(Step by Step)
    https://websmp209.sap-ag.de/~sapidb/011000358700000086852008E.sim
    https://websmp209.sap-ag.de/~sapidb/011000358700000086862008E.sim
Let me know if you still need any help
Regards,
Sanjai

CCMS alert through Solution Manager

Hi,
Is anyone can tell me how to setup CCMS alert through Solution manager for R/3 system landscape
how many step are req.
This means that system alerts which occur in the local CCMS, are passed to the SAP Solution Manager via RFC connections between the SAP Solution Manager and the satellites. The system shows these alerts in a graphic or in Sessions.
I would like to handle the alerts, without having to go to the local CCMS of the satellite systems.
I will really appriciated for step by step procedure...
Thanks in Advanced

Details of all documents and sims are avalible related to your question @
http://service.sap.com/rkt
Good luck,
Krishna

Support pack through solution manager

Hello,
Please provide the document /link to download/apply support pack through solution manager.
Thanks
Kailash

Hi,
1. You will have to implement MO (Maintenance Optimizer) in SOLMAN.
2. Check with http://service.sap.com/Solutionmanager.
3. http://service.sap.com/notes --> OSS note no is 1134872 Maintenance Optimizer: FAQ of stack delta files in EPS
4. http://help.sap.com --> Search for Maintenance Optimizer.
Regards,
Srini Nookala

How to execute eCATT's from Solution Manager

Hey Everyone,
am using solution manager version 3.1,WAS 620.
and eCATT SAPGUI 640.all my recording are done with SAPGUI recording in Development System.and i execute via TestPlan STWB_2.
Now,my question is,How to execute all these eCATT scripts from Solution Manager.Do i need to transport the whole repository of eCATT from development system to Solution Manager?.
I appreciate if you guys pass some comments on this issue.
Thanks in Advance,
sarapu

Do i need to give target system to development system from solution manager?
can i give the same system data container in solution manager while creating testplan..
in prior do i need to create a testcatalog STWB_1 in order to create TestPlan?
please pass your comments,
Thanks,
sarapu

ECATT integration with solution Manager

Hello Colleagues,
Please let me know if any of you have worked on integration between Solution Manager and eCATT.
I have the scripts in eCATT system now i need to run these scripts from Solution Manager system in the target system.
Any info would be of great help.
Thanks,
Ajay

Hello Ajay,
Have you seen these links?
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/7e/8186fa137998448de956476b8cecdc/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/de/50e848f5f311d5997000508b6b8b11/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/48/e151fddb163184e10000000a421937/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/59/f49e6fe97711d5995d00508b5d5211/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/cb/cb3a3e5069eb6ce10000000a114084/frameset.htm
These links are from the Solution Manager Help Library, so the information is specific to Solution Manager for eCATT
Regards,
Paul

Problem in testing through sol manager

Hi guys,
We are facing a problem in assigning a test package to users. We have done the following in solution manager
1) Created Project
2) Selected the business scenarios
3) Generated the blueprint
4) Done the configuration
5) Created the Test case i.e. with manual testing and second with test document
We have created a test plan and created the test package also. But when we try to assign the users to this test package system gives message that "No Values found". Can anybody clarify the following
1) How to assign the testers to test packages?
2) Do we need to create a tester seperately ? Do we need to define this somewhere in project management?
3) How can we link the test cases to test package
thanks in advance

Hi Sai Vineeth,
(1) To assign Testers to a Test Package, they must have valid Log On (User IDs) to SolMan
(2) Such User IDs need not be assigned as Project Team members in Project Administration transaction - this assignment is helpful mainly for picking them up in 'Administration' tab of SOLAR01/02 and not much else - so, you can ignore this
(3) Sometimes, if you select the Test Package - the one with an icon of grid-like Cube (by placing the cursor on that) and click on the Assign Tester icon, the system is not able to 'detect' that you are indeed on the Test Package level. It may give you a message "Select a Test Package". All you have to do is play with your mouse around and select it again. It will work !
I cannot foresee any other reason.
A quick checklist:
(1) User IDs (representing each Tester) are in SolMan
(2) Test Plan is in place
(3) Test Packages are created within the Test Plan (Test Packages are basically sub-sets of a larger Test Plan)
(4) You do place the cursor on the Test Package before clicking on the 'Assign Tester' icon
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on May 15, 2008 9:45 AM; Formatting changes

Validation while Article Creation Request through Solution Manager

We are about to implement Solution Manager. We want to automate the process of registering some of the MDM requests through SolMan.
We want to upload the standard formats which user needs to fill and also want to keep the validation for the minimum requirement in those templates.
Any help will be appreciated.

Thanks Ragu;
This is what I am looking for.
When a change request is created, we use the e-mail function in Solution Manager. For the Recipient we a valid "email address" . The recipient type is "Via internet.
Using this sends the e-mail via excjhange server.
What I am looking for is an "audit trail" of some sort (in Solution Manager) of what e-mails were sent. These do not show up in the "sent" items of outlook.
Hope this make some sense.
Regards
Don Newton

Configuration of CCMS through solution manager

Hi,
I am trying to do first time the configuration of CCMS auto alerts through Solman EHP1,I mainted the satellite system in solution manager.mine environment is linux with maxdb.how to proceed for the same to start.
Thanku

Hi,
Thanks for inputs.
1) Created the CSMREG User in Solman system
RZ21 --> Technical Infrastructure --> Configure Central System --> Create CSMREG User
2) CSMCONF Start File -- in Solman system
RZ21 -->Technical Infrastructure --> Configure Central System -> Generate Configuration File for Agents (I saved the CSMCONF file)
3)I downloaded the CCMAGENT_7-10005984.SAR file from service.sap.com ,from here onwards iam bit confusing how to proceed for the same. (Iam having this directory in satllite system /usr/sap/TST/DVEBMGS00/log/sapccm4x)
Thanku

Daily Monitoring of PRD of BI, XI, ECC, through Solution manager

Dear all ,
I have only configured Earlywatch alert for BI , ECC 6.0 on Solman(every week monday i got EWA report and I have taken action as per the EWA report).
Now my question are ,
Daily Monitoring of PRD of BI, XI, and ECC is possible ?
Weekly Monitoring of DEV & QAS of BI, XI, ECC, ?
EWA for XI is possible ?
Finally how can i completely use Solman server for monitoring ,etc....
Kindly advise
Regards

Hello,
Daily Monitoring of PRD of BI, XI, and ECC is possible ?
Of course possible, what kind of monitoring are you looking for?
Using the System administration functionality you can perform the pro-active monitoring, which will also trigger auto reaction methods whenever the thresholds are reached, as per the setup performed.
There are SAP standard parameter monitoring available, in addition you can define your own parameters to be monitored in the System administration workcenter functionality.
Weekly Monitoring of DEV & QAS of BI, XI, ECC, ?
You can use the central system monitoring functionality which enables you to perform monitoring tasks as per the period/frequency specified.
You can also input your/teams monitoring notes/observations and generate it as a separate report.
EWA for XI is possible ?
It is possible; for ABAP stack, perform the same steps as you performed for other ABAP (ECC) systems, for Java stack of XI, configure the Solution Manager Diagnostics which will trigger the EWA for Java part. Finally you receive a consolidated (ABAP+Java) EWA next Monday.
Finally how can i completely use Solman server for monitoring ,etc....
EWA, SLR provide you with a reporting functionality which again is a result of monitoring your system over the previous week.
Using System administration and Central system monitoring you can leverage the monitoring capabilities.
Using SMD, Wily you can extend the monitoring of Java and dual stack systems
Using BPMon you can attain the Business process monitoring.
In addition, in the work center you can see additional monitoring options, like. RFC monitoring.
Hope this helps.

Activities through solution manager.

Dear Friends,
As part of sap basis administrator what are activity we will do by using solution manager.
please give me details
thanks
zaheer.

Hi
It all depends upon project requirement normally you will generate key to install ERP BI etc
and configure EWA
But based upon project requirement you can do more
Please follow the Technical administrator roadmap 7.0 (SAP Solution Manager 7.0: Learning Map for Technology Consultants & System Administrators)on service market place to learn and explore
or overview and Set up phase in EHP1 roadmap
https://websmp102.sap-ag.de/support
Hope it helps
Regards
Prakhar

Error while confirming SPAM/SAINT patch through Solution Manager MOpz

Hi,
When I am confirming patches (release 700) in Solman through maintenance optimizer, it is allowing to confirm all except the SPAM/SAINT update version 700/0027.
For the SPAM/SAINT patch, it is giving error "Object <some number> update error".
Please let me know what to do.
Thanks & Regards,
Kunal.

@sean i said him alternate way of downloading the patch of SPAM/SAINT 30 when he is unable to download from MOpz
I always try to give alternate possible ways to resolve the problem.
Regards
Uday

ECatt testing through Solution Manager

Similar Messages

Maybe you are looking for