ECATT Unable to Test a Remote System

Hello Dear Expert,
I am trying to record an ecatt Script to be played from my solman system on a BW system.
I've created the system data container with the rfc_bw in SM59.
WHen i test the connection using Test Connection, everything is ok.
When i test the connection using Remote Login , nothing happen at all.
When i play the script , i 've got error
1-User has not logged in 00:00:20
2- User has no dialog right
3 - too many sessions are open
This is the same behaviour if i check Logon screen in SM59 or if i enter
a valid user on system BW (dialog user with RFC all rights + ecatt rights)
When i use "Log on Target System" nothing happend in eCATT also.
But i can display target system infos from ecatt Menu.
Do you have any clue about what could be wrong ?

Hi
I'm getting exactly the same error message when playing back the script I've recorded. Albeit in our SAP system (not BW system)
I'm in our Development System at the moment and want to reply back into the same System that I have created the eCATT in and created the recording to run the eCATT in.
Did you manage to resolve this?
If so could you share
Thanks
Steve

Similar Messages

HTTP Response :500 unable to connect to remote system.

Hi,
I am doing proxy-xi-file scenario, where i am getting this error in sxmb_moni in R/3.
The error reads with red flag:
HTTP Response :500 unable to connect to remote system.
Please tell me what can be the reason.

Snehal,
Error: The error message 503 Service unavailable Application stopped! is displayed.
Description: The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
You can have a look on this blog for the same.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Sarvesh

Unable to Edit/Remove Remote Systems using MDM 7.1

Unable to find an answer to this in either the forums or the Wiki...
Using MDM 7.1 through the SAP MDM Console 7.1.03.54
I can add a new Remote System, it comes up with the default values for the Remote System fields:
Name: New Remote System, Code: NewRemoteSystem, Type: Inbound, Key Generation: None
But I cannot modify the field values nor can I delete the Remote System.
The right-click context menu always has 'Delete Remote System' greyed out.
Nor do I see any mechanism to modify the fields' values. Moving to the Remote System Detail pane, none of the fields are edittable; I have tried left-clicking, right-clicking, double clicking, using the Edit tool bar menu - nothing lets me edit these fields.
My user account has the Admin role. Looking to the Admin role, it has Execute for all functions, and Read-Write to the Remote Systems in the Tables and Fields tab.
Any help would be appreciated.

Hi Andrew,
Your repository should be in unloaded state to make changes in any table whether main table, subtable, Ports, Special tables or Remote Systems table etc. As you want to make changes in your repository Remote Systems, please unload your repository->Go to Admin>Remote systems>Make necessary changes (Add/Delete/update)--> Then load repository.
Note: You can only add User and Roles during Repository loaded state.
Regards,
Mandeep Saini

Unable to syndicate same Remote System with differnt value

Hi,
I am working on MDM 7.1 SP05 and I have the following issue with syndication:
I have a remote system table (Key Enabled) with System as Non-Qualifier and value as Qualifier and I have values in the MDM Datamanager as
MDM ID, Remotesystem (Multivalue Qualifier Table with Key Enabled)
111,((Qual1-Key,Val1),(Qual1-Key,Val2),(Qual1-Key,Val3))
When I syndicate I see only one value as 111, (Qual1,Val3)... But I want to have all the Qualifiers-Key with multiple values.. Where as in MDM 5.5 I can see all the Qualifiers with out any issues..Is this a restriction in MDM 7.1?
If I map System instead of Remote Key of Qualifier Table then I can see multiple times of same remote system with appropriate values.. But If I map remote key then I see the consolidated/the latest system-remote key wiht value... But I want system-remote key value appear multiple times...
Thanks alot
Rajeev

I am using customised...
Did you tried syndicating Remote key of that table or the field of the Qualifer table?
I am able to syndicate out with the system field and values.. But I want to syndicate out the multiple values wiht remote key of the table..
As mentioned Remote keys are AAA and BBB for System Sys1 and Sys2..
First I imported remote system table with Sys1 and Sys2 with remote Keys as AAA and BBB. then along wiht main table record I imported Sys1 and Sy2...
While Syndicating I want to syndicate AAA and BBB values along with Value field...
Suppose:
I have data :
MDM ID, RemoteSystem(System, Value)
111, ((Sys1,Val1),(Sys1,Val2),(Sys1,Val3),(Sys2,Val1))
Remote Keys for Sys1AAA and Sys2BBB
In the Syndication Manager I mapped as below: RemoteSystems RemoteKey and value are mapped to target...
RemoteSystem
--RemoteKey
System(DFNQ)
--Value(Qualifier)
I mapped RemoteKey and Value to the target fields.. Which is a XML output..
<REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val3</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>BBB</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val1</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
</REMOTE_SYSTEM>
Where I need the following Output:
<REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val1</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val2</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>AAA</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val3</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
- <Z_MDM_REMOTE_SYSTEM >
<Z_MDM_SYSTEM_NAME>BBB</Z_MDM_SYSTEM_NAME>
<Z_MDM_VALUE>Val1</Z_MDM_VALUE>
</Z_MDM_REMOTE_SYSTEM>
</REMOTE_SYSTEM>
Any inputs.
Thanks
Rajeev

How to test if remote R/3 system (Receiver) is down in case of Async RFC ?

Hi Experts,
How to test if remote R/3 system (Receiver) is down in case of Async RFC call? There is no BPM as well. I have configured an alert category and created a rule in runtime workbench's Alert Configuration for the specific inbound interface.
I have tried by stopping the channel and also by changing the server name in the communication channel but all in vail. XI still shows message successfully processed.
Kindly help me
Thanks
Gopal

Hi,
How to test system down in XI? Kindly help!
Have answered here as well.
Meanwhile, you would have an error in the receiver RFC adapter in Comm Channel Monitoring.
Maybe you change another RFC adapter rather than the one being used in the receiver agreement.
regards
Bhavesh

Unable to add remote system into cluster using osx 10.5.2

About a month ago, I had a quartermaster managed compressor cluster setup with three (3) systems. I was running FCP 6.0. on one system with quartermaster on that system managing the cluster. Compressor, quatermaster, and quicktime were installed on the other systems. All systems were running osx 10.5. FCP 6.0 suite tools was installed on one system. One of the systems was an intel and I had a two (2) instances setup as well as a virtual cluster on the intel. All worked perfectly.
All machines were upgraded, to the latest quartermaster, compressor, quicktime, and osx 10.5.2 with the leopard graphics updates.
Now I can no longer join the remote systems into the cluster. On these systems I have share and managed set, for both rendering and compressor. Yet in quartermaster they only show up as rendering nodes. If I remove the shared option, then the nodes appear as a unmanaged compressor service. But they are greyed and cannot be added to a cluster.
Before the update, they would display in quartermaster as both rendering and compressor services and could be added to a managed compressor cluster.
Did the updates break something or is there a new requirement that I am missing?
thanks

I'm having exactly the same problem on multiple machines, both Intel octocore and G5 quadcore. I'm running 10.5.4 with all the latest updates on all machines. Everything was working, now we can't drag any of the machines into a cluster to make a new one. Like you say, they only appear if Managed is unchecked (on the machine providing the QMaster service), and then are still greyed out, and not draggable. And you can't save a cluster without specifying the cluster controller, which you can't because nothing can be dragged in. The nodes appear to be unlocked (although the icon isn't very obvious), but even if they're locked, there is no password entry that pops up when clicked, and none have a password set in their QMaster System Preferences.
To test, I did a totally 100% fresh pristine Leopard install and a dual G5, ran all OS upgrades, then did a fresh FCP Studio 2 install, and ran upgrades again and repaired permissions just for good measure. No dice. Exactly the same problem as on the other machines. This is a brand new install and it doesn't work!
Very frustrating problem and I can't believe more people aren't seeing it. Totally fresh install, what else can be done? Well, time to call AppleCare, I guess.

Remote Test and Demo Systems

Would like comments from prior users of Remote Test and Demo Systems (or DPA?) where you get remote access to an SAP maintained system for the purpose of testing your application's interfaces with SAP ERP and/or BW.
- how do you obtain this access
- how long does this process take
- what's the cost
- how well does the system work
- do you get access to only the built-in data or you can create your own.

Hello Veeren,
Hope this helps:
Q. How to obtain access ?
Just contact the ICC guys <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc">http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc</a> and they will help you out with this. We had a lovely experience with the consultants for our XI Content Certification.
Q. How long does this process take ?
In our case, it was less than a week.
Q. What's the cost ?
We were fortunate to do it during the promotional period and did not have to pay anything. The ICC consultant would help you with the details.
Q. How well does the system work ?
The system was quite fast and the access is via ITS / SAP GUI for HTML.
Q. Do you get access to only the built-in data or you can create your own ?
Besides the XI Server, it was an IDES system in our case and we were also able to create data.
All the best for your certification.
Regards,
Parag.

Unable to patch remote systems

Need help with the setup to patch remote systems. I am using NIS and am first trying to patch Sol 10 systems before I install the management software on older versions. Can someone give me a clue why I am failing to update these remote systems please.
Chris

MSI (c) (1C:64) [09:06:15:075]: Final Patch Application Order:
MSI (c) (1C:64) [09:06:15:075]: Other Patches:
MSI (c) (1C:64) [09:06:15:075]: Unknown\Absent: {AC76BA86-A440-FFFF-A440-7A8C40011009} - C:\Users\*********\Downloads\AcrobatUpd11009.msp
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
C:\Windows\Installer\c288bb.msi
MSI (c) (1C:64) [09:06:15:075]: Product: Adobe Acrobat XI Standard - Update '{AC76BA86-A440-FFFF-A440-7A8C40011009}' could not be installed. Error code 1642. Additional information is available in the log file c:\temp\acro.log.
MSI (c) (1C:64) [09:06:15:076]: Windows Installer installed an update. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.05. Product Language: 1033. Manufacturer: Adobe Systems. Update Name: {AC76BA86-A440-FFFF-A440-7A8C40011009}. Installation success or error status: 1642.
MSI (c) (1C:64) [09:06:15:077]: Product: Adobe Acrobat XI Standard -- Installation failed.
MSI (c) (1C:64) [09:06:15:077]: Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.05. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1642.

Backupeventlog not working for remote system in PowerShell

I have the following code snippet that works if I specify localhost or the name of the local computer, but does not work if set to a remote server. I am running the script as Administrator using my Domain Admin account. Both local and remote systems
are Windows Server 2012 and in the same domain. PowerShell version = 3.0.
Param(
[parameter(Mandatory=$true,ValueFromPipeline=$true)]
[ValidateScript({Test-Connection $_ })]
[String]
$Server,
[parameter(Mandatory=$true,ValueFromPipeline=$true)]
[String]
$LogFileName,
[parameter(Mandatory=$true,ValueFromPipeline=$true)]
[ValidateScript({Test-Path $_ -PathType 'Container'})]
[String]
$OutputFolder
$EventLog = Get-WmiObject win32_nteventlogfile -ComputerName $Server -Filter "LogFileName = '$LogFileName'" -ErrorAction SilentlyContinue -ErrorVariable $ResultError
If ($ResultError)
Write-Host "ERROR: unable to event logs from $Server."
} Else {
Write-Host "Backing $Server."
$EventLog.backupeventlog("$OutputFolder\$Server.evtx")

After spending some more time troubleshooting this and doing some more research I found the link below. I found it strange the hoops the author went through to handle event logs on remote systems until I realized that the path for "backupeventlog"
is relative to the remote system, not the system running the script. So I checked the other systems and found that the event log backups had been created. This would explain the returnvalue of 80. What's worse is that the path for "backupeventlog"
can't be a UNC -- I tried, it didn't work.
Back Up Your Event Logs with a Windows PowerShell Script
https://technet.microsoft.com/en-ca/magazine/2009.07.heyscriptingguy.aspx
I decided to re-read Microsoft's documentation and found the magical text that I had over-looked:
BackupEventlog method of the Win32_NTEventlogFile class
https://msdn.microsoft.com/en-us/library/aa384808(v=vs.85).aspx
In addition, you must make backups to the local computer; you cannot save a backup of the event logs on Computer A to Computer B. Backups are implemented by using the LocalSystem account, which does not have the network credentials necessary to access remote
computers. If you want to save backups to a central repository, modify the script to first perform the backup, and then move the backup file to the central repository.
jrv:
I would mark your post of Wednesday, March 04, 2015 9:45 PM as helpful if this option were available. Your comment got me to dig into this deeper and discover
the root cause.
Thanks.

Remote system disconnected after installing MAX 4.7.3

Hello!
This topic is related to the topic you can find here.
In order to repair the Regional Settings issue in Windows (XP in my case) I used the System Configuration 1.1.3 update and it seems to work. I changed the Regional Settings to my local and installed the update. Silverlight does not crash anymore, so that is fixed. However, this created a new issue:
Now my remote devices (NI-1742 and NI-1746) status is always "disconnected". The devices are connected to a different subnet than the development computer. Pinging their IPs showed that they are there. I can connect to the cameras using the Real-time Project. However, in MAX the remote system status remains "disconnected". I tried to delete and re-create the devices in MAX but that did not work either.
I also tried the latter with Windows firewall on and off and updated the software with NI Update Service. On an another computer, which has not had the update yet, I can connect to and modify the devices.
In addition, I completely reinstalled the development system, but the issue persists.
Kind regards,
Mart
Solved!
Go to Solution.

Hey Mart,
It looks like this may be related to a possible bug introduced in MAX 4.7.3. I've uploaded Juurma.zip to our FTP site. Please obtain this .zip file by navigating to ftp://ftp.ni.com/outgoing.
This .zip file contains a patched version of mxRmCfg.dll. First, close all NI software and stop the NI System Web Server service and all its dependencies (you can get to your services by going to Start->Run and typing in services.msc). Then, navigate to this directory: C:\Program Files\National Instruments\Shared\MAX\Bin
You will need to rename the existing mxRmCfg.dll to mxRmCfg.bak, and copy the new version to that location. Restart your system, open MAX, and see if you can connect to and view your targets.
If this resolves your issue, PLEASE post back in this thread indicating as much. If not, let us know and we'll continue to investigate. Note that items on our FTP server will be removed after 48 hours, so let me know if you're unable to get that file in time
Justin E
National Instruments R&D

Remote system monitoring entry- data not relayed to Central system

Hello Folks,
I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
I guess i am doing something wrong. Am i looking in the wrong monitor set?
As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
Can some one please help.
Regards,
Prashant

Hi Prashant,
if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
To check your environment, pls do the following:
in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments > change to edit > select your segments > reset segment in "WARMUP" status.
In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
and last but not least you could try the following for missing OS MTEs
delete ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.

Monitoring of remote system's Transactional RFC and Queued RFC

Hello,
In our production system, in rz20- CCMS monitor templates- Communication-Transactional RFC and Queued RFc- outbound queues- Queues otherwise not monitored we can see blocked queues for each client.
System is connected to solution manager and we wish the central auto reaction is implemented in solution manager
However i am unable to find Transactional RFC and Queued RFC for the remote system, they exist only for solution manager itself
Tell me how can i do the central monitoring

Hello,
First you need to check with your Landscape in solman in order to monitor any kind of activities to do so pls follow these steps.
Go to SMSY in solman under Landscape components>Product systemsselect you satellite system example SAP ECC.
On the main screen you will find client for which you have generated RFC connection. Please check though connection are working fine, Go to edit mode and try to click on generate button there will be a pop-up, which gives a clear picture of RFC connection which already exists, and you can also re-generate this RFC connection by clean it up when you re-generate pls select under Actions after generation assign RFC dest for system monitoring.
But make sure there is no project impact on this RFC, like they are not using any logical components and already have some projects running on this RFC connection.
I would advise you to first you the option of assign and check RFC button which is next to generate icon.
Regards
JUDE

Not able to access javaFx charts from a remote system after using ext. jars

We are facing following issue. Any recommendations to resolve these issues are highly appreciated.
1. Not able to access javaFx charts from a remote system (More details at the end of mail).This is high priority requirement as we have a web based reporting application and users access it over our static IP address.
We are using Java Fx charts in our web application where we built jnlp and jar files in a separate fx project and kept jar and jnlps inside our web project.
It is working fine when we did not used any external jar files and remotely it is accessible. But when we used external jars our project is running on local
system but remotely it is not working due to some path settings. We modified jnlp files where entry of jar files exists and modified the jar path as per our
project. But still it did not work.
Before using external jars inside our java fx project my jnlp looks like:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
<jar href="JavaFXApplication3.jar" main="true"/>
</resources>
<application-desc main-class="com.sun.javafx.runtime.main.Main">
<argument>MainJavaFXScript=misc.Test</argument>
</application-desc>
<update check="background">
</jnlp>
After modifying my jnlp as per my project as
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="/PiFx/FxFiles/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
<jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
</resources>
<applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
<param name="MainJavaFXScript" value="misc.MyChart">
</applet-desc>
<update check="background">
</jnlp>
After adding external jars my jnlp looks like this :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
<jar href="JavaFXApplication3.jar" main="true"/>
<jar href="lib/jdom.jar"/>
</resources>
<application-desc main-class="com.sun.javafx.runtime.main.Main">
<argument>MainJavaFXScript=misc.Test</argument>
</application-desc>
<update check="background">
</jnlp>
I have modified the jnlp as per my project :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="/PiFx/FxFiles/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
<jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
<jar href="/PiFx/FxFiles/lib/jdom.jar"/>
</resources>
<applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
<param name="MainJavaFXScript" value="misc.MyChart">
</applet-desc>
<update check="background">
</jnlp>
where PiFx is our project Name

We have tried few things given in thread : http://forums.sun.com/thread.jspa?threadID=5401999
Now it is not able to get the external jar file only
exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
     at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
     at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
     at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
     at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
JavaFXApplication3.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3.jnlp">
    <information>
        <title>JavaFXApplication3</title>
        <vendor>Saurabh</vendor>
        <homepage href="/PiFx/FxFiles/"/>
        <description>JavaFXApplication3</description>
        <offline-allowed/>
        <shortcut>
            <desktop/>
        </shortcut>
    </information>
    <resources>
        <j2se version="1.5+"/>
        <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
        <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
        <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true" />
    </resources>
    <application-desc main-class="com.sun.javafx.runtime.main.Main">
        <argument>MainJavaFXScript=misc.MyChart</argument>
    </application-desc>
    <update check="background">
</jnlp>JavaFXApplication3_browser.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
    <information>
        <title>JavaFXApplication3</title>
        <vendor>Saurabh</vendor>
        <homepage href="/PiFx/FxFiles/"/>
        <description>JavaFXApplication3</description>
        <offline-allowed/>
        <shortcut>
            <desktop/>
        </shortcut>
    </information>
    <resources>
        <j2se version="1.5+"/>
        <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
       <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
        <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true"/>
    </resources>
    <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
        <param name="MainJavaFXScript" value="misc.MyChart">
    </applet-desc>
    <update check="background">
</jnlp>Applet Code
javafx({
archive: "../FxFiles/JavaFXApplication3.jar",
draggable: true,
height:hgt,
width:wdt,
code: "misc.MyChart",
name: appletName,
id: appletName
});

Remote System Explorer on a Wireless LAN

On a wireless LAN when I use Remote System Explorer, it knocks our Fieldpoint network modules off-line. We are unable to ping them. Once we restart the units, they work fine until someone uses the Remote System Explorer again. Any ideas?

We have FP1600s and FP2015s. It only affects certain FP1600s. Firmware revision is 3.0 on the 1600s. Some older ones are not affected and some newer ones are. We configure them in the shop on a LAN, then move them to a field environment. The only firewall is point of entry onto the post.
When using Remote System Explorer (the latest and greatest version), one at a time is "knocked off line". Every time Remote System Explorer refreshes another 1600 is knocked off line. I see no relevance to a crossover cable. This occurs over a WLAN. If we don't use Remote System Explorer then they just chug along fine.
I have used the FP1600 Diagnostic Utility which was a mistake. Now the status LEDs blinks red 7 times.

Utilizing NI DAQ hardware on a remote system.

I noticed that the new version of Measurement & Automation Explorer for LabVIEW 8 now has a "Remote Systems" tab. Would this enable me to have say Computer A setup with some DAQ hardware and then utilize that hardware at Computer B over a 100 or 1000mbps ethernet network within LabVIEW?
If not, what would I need to be able to do that? I've played around with the web publishing tool, and would rather have the actual LabVIEW program running on Computer B rather then on Computer A.
Thank you for your input!
-nickerbocker

Thank you for your reply GDE [DE]!
That’s too bad. I assumed too much and thought we
were able to do something fancy.
I work at a test facility where the tests that we run are hazardous.
We have a lot of concrete walls between us and the tests that are run. We
have a test console setup where we have our entire test monitoring tools in a
central location. The problem is, whenever we make a new test chamber all
the transducer lines have to be drawn to our test console. These lines
consist of analog outputs from Omega DP units that power and read pressure
transducers and K-type thermocouple channels.
This makes it difficult, if not impossible when time is
constraining, to setup for a new test. Some of our newer test chambers
and rooms that we have added to our facility are further and further away from
our test console. Long analog lines are not good for noise reasons.
Long thermocouple channels are even worse since the signal is so small and varying
temperature gradients across the line can affect measurement readings.
The solution that seems apparent to me is: why don't we
read our transducer values closest to the test cells and network that
information back to the test console through a high speed gigabit network?
I was hoping that a remote data acquisition computer would
just consist of an operating system, the hardware and hardware drivers for DAQ,
and then MAX. The computers at the test console would be in charge of
actually administrating the test procedures (Digital I/O) and DAQ through the
network.
I have looked at the web features available in our license
of LabVIEW 8 Professional Developer and I'm pretty impressed with its
capabilities. The problem is I don't want to have to obtain a LabVIEW 8
license for each remote computer. It is just too expensive. I can
build executables with my developer’s license of LabVIEW 8, but I don't think
that the web server features can be built into an executable LabVIEW program
(or can they?).
Can I use this shared variables solution that you speak of
in a LabVIEW built executable?
I hope that I have provided enough information about my
problem to help stimulate some possible solutions and more discussion. I
really appreciate the help that these forums provide and hope that I am able to
give back to this community.
-Nic

ECATT Unable to Test a Remote System

Similar Messages

Maybe you are looking for