Ecc 4.7 smartform table/template cell border thickness cannot be reduced

Hi
I am executing the SF_Example_01 and 02 and 03 and the table borders are not appearing properly. They look very thick and I could not figure out a way to reduce the thickness anywhere in table painter. I use sap version 4.7 and the printing device selected for preview is LP01. I am getting the same result when I try to preview the tables or templates that i created. The table cell lines just appear very thick. Please help me solve this
Thanks
Ajith

Hi Jshree
I have already tried that . did not work. In fact I tries all the answers given in the below link for no avail.
Smart form:extreamly thick table frame line
Thanks
Ajith

Similar Messages

Regarding smartforms Table & Template.

Hi Experts..
i want to know the difference between table and template in smartforms.
when we have to go for table and when to template??
Thanks & Regards,
sathish.

Template:
Output of a table containing static data. That is when u know the amount of data u have (i.e. fixed data), you use a template.
Table:
When the data is of variable length and u dont know how many record lines u r going to have, you use a table. But u can also use the table as a dynamic template by unchecking the 'loop at internal table' check box in the data tab of the table node.
In brief, template is for static data and table is for dynamic data.

SMARTFORMS :How to print an inernal table inside a template cell?

Hi all,
I have a smartform which contains a template.
I want to print inside a cell of the template the content of an internal table.
Is this possible ?if yes , how to do that ?
Thanks.

Yes, it is possible.
Create inside your template a loop. Then create inside a text which you address as i.e. row 1, column 1 of your template (cell address).
Now when looping through your table it will place all data in some work area .i.e wa. In your text provide name of the components you want to dispaly i.e. &wa-comp1&.
Please note, that length of your template must be long enought to fit all tables entries.
Regards
Marcin

Smartforms - Is it possible to Customize Cell Border In Template in 4.6C

Hi,
In smartforms, i know that Customizing Cell border is possible with node type TEMPLATE in version 6.20
Our system is 4.6C
But there are many differences between 4.6C and 6.20 about SMARTFORMS.
Is there a way to specify custom cell border without "Select Pattern" option with node type TEMPLATE in 4.6C
thanks
ibrahim

Hi,
As you identify there are some large differences between Smartforms in 4.6c and 6.20. So there is no equivalent of the cell-specific borders in 4.6c
Regards,
Nick

Table Problems (Cell Shading and Default Format from EDD and Template)

I have two problems related to tables using Structured FrameMaker (Version 10), whilst in-processing XML.
I've designed two different table formats in my Template; Format A with black shading - 30% for THead and 3% for row, and Format B with blue shading - 30% for THead and 3% for row.
If I create a structured document from scratch and insert a table, I get the required Black (30%) and Black (3%) shading.   If I then insert an informaltable, I get the required Blue (30%) and Blue (3%) shading.
Although I've given the two table types different default formats in the EDD - Format A for table and Format B for informaltable - when I open the XML file (normally) from within FrameMaker I notice that all the tables default to Format A (black shading).   When I then import my EDD table should stay as Format A and informaltable should change to Format I.   This doesn't happen; they all stay at Format A.
I can change informaltable by manually applying Format I, this worksI. Obviously, with long documents which might have hundreds of tables we can't afford the time and manpower to do such things one at a time by hand.
Do any of the Structure gurus have a fix for this, or can someone give me a hint of what I might be doing wrong?
The second, but related question was a general one.   I see that Adobe says
"Tables
FrameMaker table formats are only partially integrated with the structure model. The content of
a FrameMaker table is always fully structured, but the control over cell border ruling is limited and
there is no structure format control over cell shading."
I believe it could be useful to apply cell shading on an individual cell basis (although I'm not sure whether this is possible at the XML level - where someboddy might give an element an attribute of, say, shading (with options, such as, green, red, blue, yellow all at, say, 30%, with a default of red, for example.
I've seen that there has been mention of plugins to achieve cell shading in structure; does anyone have an experience with such things, more to the point, can anyone point me in the right direction?   I don't mind paying fo a solution which I can implement myself.
Any help or advice would be much appreciated.
Regards
Chris

Hi,
could you please provide some details on the EDD, RWR and some example XML?
My wild guess goes into the direction of the RWR not containing enough information that get written out into XML.
We're using table formatting with shaders too (using an attribute to control the specific formatting of each table) and it works like a charm in FM9 and FM11 when roundtripping.
The context rules are used in the table group (i.e. tgroup element). This might already solve the issue .
Cheers Alex

Box in Template Cell(Smartforms)

Hi all,
I am having a text inside a Template Cell.
I need to have box,all around the text.
The system (ECC 6.0)is not allowing borders in the template.
Please suggest some way to do this.
Thanks in advance
Regards
Ananya

Hi,
In the Template -> TEMPLATE tab -> u will find several square buttons like SELECT PATTERN, OUTER FRAMEINNER FRAME etc.
use those , more revert back
regards,
Prabhu
reward if it is helpful.

Selected Table Cell Border in 1.4.2

Hi All!!
I am facing a problem with JDK 1.4.2_01 & Windows L&F. I am unable to see the yellow border around the selected cell in JTable. Was working fine with 1.4.1_03.
A bug with id: 4674205 was reported with 1.4.0 stating :
" In the Windows Look and Feel, the selected cell in a JTree or JTable is framed with a yellow rectangle. To accurately match the real Windows UI, it should be a black and white dotted rectangle instead. (This was part of bug 4268204,which was marked fixed, but this part hasn't been fixed.) This behavior was fixed for JList, but not JTree or JTable. "
Now it has been fixed and closed.
May be they might have removed setting of yellow border for the selected cell to match with native windows UI.
But selected cell border is very much necessary for my project. Can any one please suggest me a workaround.
With Regards,
LRK

Hi Sai!
Thanks for your reply. It will not be feasible in my application as it already has huge number of tables with some of them already having complex renderers and editors.
I was looking at something which i can set globally so that it will reflect to all of the tables in the application in a particular L&F.
I tried setting
UIManager.getDefaults().put("Table.focusCellHighlightBorder",Color.yellow);
and
UIManager.put("Table.focusCellHighlightBorder",Color.yellow);
But no luck.
Any other inputs are most welcome.
With Regards,
LRK

Dynamic color in cell of an SmartForm Table

Hi Experts,
How can i assign a color for a text in a cell (shading) in a smartform table?? Color depends of the data in smartform.
Thanx

I don't think we can do it dynamically.
So, may be you have to create as many texts as you have colors conditions and assign relevent condition to each text.
Regards,
Naimesh Patel

Display the background of table row alternatively and hiding cell border

Hi all,
I am trying to display the background of the table using different color alternative and at same time I need to hide the border of all cells.
What I found in <af:table> is using bandingInterval="1" banding="row", but how can I set the background color? And how to hide the cell border?
Or if there is a thing like row index so that I can mod it like rowIndex%2==0 in every column to determine the inlineStyle?
Thanks.
Shawn

<af:table value="..." var="row" varStatus="status">
<af:column inlineStyle="#{status.index % 2 > 0.5 ? 'border:none;' : ''}">
</af:column>
</af:table>For some reason, EL operation always seems to return a double, so the condition has to be defined with that in mind.
Regards,
~ Simon

Cell border and text buttons.

Dear members:
I am a beginner and have just started using Dreamweaver.
After a few attempts and some reading I decided to post a message
with questions on a couple of problems I haven't been able to find
answers for.
The first one relates to table cell formating. I have tried
to set border properties for individual table cells but haven't
been able to. I would like to be able to set individual border
thickness and border color values for different cells in a table.
How is this done ? I have selected the cells I wish to format but
the property window shows color but not border thickness value. Any
ideas ?
The second issue relates to text rollover buttons. I wish to
create simple navigational buttons in a web site created from text
placed in table cells. The text should be created as one color
(gray) for the "up" state and then change to a different color as
the state changes to "over" and "down". I have looked at Flash
buttons but they are not exactly what I want and don't offer the
option I am looking for. Flash text also doesn't allow me to set
behaviors as most behaviors appear grayed and non-selectable. How
can I create rollover buttons from simple text that changes color
and style (normal, bold, italic) with state changes ?
Any help will be very appreciated. I apologize if these
questions seem basic but I am beginning to work with Dreamweaver.
Thank you in advance,
Joseph Chamberlain

These may help -
http://www.projectseven.com/tutorials/css/qdmacfly/index.htm
http://www.macromedia.com/devnet/mx/dreamweaver/css.html
http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"FreakyJesus" <[email protected]> wrote in
message
news:ec1dq8$gjo$[email protected]..
> The answer to your table cell borders question is CSS.
Do you know much
> about
> that? It will allow you to define all the cell styles
you want, and then
> you
> apply those styles to the cells in question.
> Your text question can be done a few ways, but again CSS
is the answer. If
> you
> don't know anything at all about it - go look - you'll
be using it again
> and
> again so it's well worth your time.
> If you know about css and need help with the specifics,
then post back and
> we
> can try some stuff out.
>
> Andy
>

Is there any way to create table inside cell in sapui5??

Hello experts,
How do we create table inside cell in ui5??
something like this::
Market Activities
Other Activities
Header 1
Header 2
Header 1
Header 2
Header 3
Header 1
Header 2
Header 3
Then how do we go about binding??
Thank you,
Best Regards
Chetna

This code is actually for simple table which i have created:
var dvrData = [
                               {DealerNo:"",checkedOrd:{checked:false,enabled:false},checkedOrd1:{checked:false,enabled:false},checkedColl: {checked:false,enabled:false},checkedPromos:{checked :false,enabled:false},
var newDvrTable = new sap.ui.table.Table({
                     id:"newDvrTableId",
                     visibleRowCount: 1,
                    selectionMode: sap.ui.table.SelectionMode.Single
//following field comes unser first column (with blank label)
newDvrTable.addColumn(new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: " Dealer Code", wrapping : true}),
                     template: new NewTextField({
                           id:"dlrNum",
                           value: "{DealerNo}" ,
// following columns come under "MARKET ACTIVITIES"
newDvrTable.addColumn(new sap.ui.table.Column({
                     name : "SHOP ACTIVITY",
                     label: new sap.ui.commons.Label({id:"shopId",text: "SHOP",
                           wrapping : true}),
                           template: new sap.ui.commons.CheckBox("chkShop",{
                                  enabled: "{checkedOrd/enabled}",
                                  checked:"{checkedOrd/checked}",
newDvrTable.addColumn(new sap.ui.table.Column({
                     name : "Order Related ACTIVITY",
                     label: new sap.ui.commons.Label({id:"shopId",text: "ORDER",
                           wrapping : true}),
                           template: new sap.ui.commons.CheckBox("chkShop",{
                                  enabled: "{checkedOrd1/enabled}",
                                  checked:"{checkedOrd1/checked}",
//Following two columns must come under Other Activities Column
newDvrTable.addColumn(new sap.ui.table.Column({
                     name : "CHEQUE COLLECTION",
                     label: new sap.ui.commons.Label({id:"shopId",text: "COLLECTION",
                           wrapping : true}),
                           template: new sap.ui.commons.CheckBox("chkShop",{
                                     enabled: "{checkedColl/enabled}",
                                       checked:"{checkedColl/checked}",
newDvrTable.addColumn(new sap.ui.table.Column({
                     name : "SCHEME UPDATE",
                     label: new sap.ui.commons.Label({id:"shopId",text: "SCHEME UPDATE",
                           wrapping : true}),
                           template: new sap.ui.commons.CheckBox("chkShop",{
enabled: "{checkedPromos/enabled}",
                                  checked:"{checkedPromos/checked}",
var oModel = new sap.ui.model.json.JSONModel();
              oModel.setData(dvrData);
var newdata = oModel.getData();
sap.ui.getCore().setModel(oModel,"newDvr");
              newDvrTable.setModel(oModel);
              newDvrTable.bindRows("/");
Thank you,
Best Regards,
Chetna

Cell border not appearing in Adobe forms

Hi,
We Placed a button in internal table cell and itu2019s property is set to invisible.
This button is set to visible based on value of other column value in the same row of table.
But border for the cell is not coming when button is invisible.
Note: the button size is equal to cell size and so when we make the button invisible ,the cell border itself is not appearing as the whole cell is invsible.
How make the cell border visible even the button in that cell is invisible.
Please put your suggestions in this regard.
Regards,
Kranti Yamparala.

Hi Kiran,
Please go through the below link:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2dbb13d79f3446e10000000a155369/frameset.htm
Here the method to hide the toolbar is given. Try passing ABAP_FALSE in method: lr_method_handler->set_hide_toolbars( abap_false ) if it works.
Regards,
Vaibhav

Cell border with categories not possible?

Several tables in my worksheet. Those without categories... I can format cell borders. Those with categories, no way. Can't select cell borders or apply line effects to a manually-selected cell border. Is there a workaround?

You are right. I also discoverd that .NET has an implementation for this. Well, I hate to resort to .NET but have no choice.

Creating table, two cells side by side but alignment in one cell throws off the other!

Hello,
I have a website that I am trying to display a table with two columns side by side and one column at the bottom.
so I use the following:
<table>
<tr>
<td></td>
<td></td>
</tr>
<tr>
<td></td>
</tr>
</table>
My problem is that I can't get the alignment to work right wit the first two <td> columsn that are side by side. i put text in both and an image but it doens't align properly even without the image. Every time press <return> it adjust the alignment in the other column. as you can see below, it doesn't align correctly. I can't get it to work right. images don't align, button doens't align, and the text on top doesn't align either.
If I press <return> in the right column at the bottom, then it moves the left column down and still doesn't align (auugh!)
Here is my code:
<table width="685">
 <tr>
 <td width="338" class="vline">
 Point 7.4 Service Pack 2 is available! 
 Point 7.4 SP2 (release date March 30, 2011), includes the newly required Anti-Steering disclosure along with other necessary compliance updates and functional enhancements<img src="../images/SideBar/customer_care.jpg" alt="" width="162" height="87" hspace="6" vspace="6" align="right" />
 MyCalyx Administrators: Be sure to log into your <a href="https://www.mycalyx.com">MyCalyx</a> account and update the user's version of Point to 7.4SP2.
 
 Click for comlete release notes.
 
 <input type="button" class="button_Download" value="Download Instructions" onclick="window.open('http://www.calyxsupport.com/downloads/index.htm?tab=1&col6=open#CollapsiblePanel6#TabbedPa nels1')" />
 
 
 </td>
 <td width="335">
 PointCentral 7.3 Server Update
The PointCentral 7.3 Server Update is available for download, (released March 24, 2011). The server update addresses field mapping issues that causes data fields to <img src="../images/SideBar/page_in_book.jpg" alt="" width="162" height="87" hspace="6" vspace="6" align="right" />inaccurately appear when generating reports and adding the owner's title policy setting under the Utilities menu. 
 
 <a href="http://kb.calyxsupport.com/kb/article.php?id=557">Click here</a> for release notes.
 
 <input type="button" class="button_Download" value="Download Instructions" onclick="window.open('http://www.calyxsupport.com/downloads/index.htm?tab=1&col6=open#CollapsiblePanel6#TabbedPa nels1')" />
 
 
 </td>
 </tr>
 <tr>
 <td height="8" colspan="2"></td>
 </tr>
 <tr>
 <td style="display: inline" height="5" colspan="2"><img border="0" src="/images/bottom_border.gif" width="100%" height="5"></td></tr>
 <tr>
 <td height="8" colspan="2"></td>
 </tr>
 <tr>
 <td colspan="2">What to look for in Point 7.4
 There have been peculiar incidents with the Transmittal Summary and calculations on the Fees Worksheet, such as transfer taxes and up-front mortgage insurance. You can prevent or avoid such mishaps by understanding the process that provoke or produce these incidents.
 We also understand that since the release of MyCalyx.com and the non-distribution of an installation CD, installing and upgrading Point is new but still simple and easy, but just takes some getting use to.
 We have provided a list of commonly used articles to help guide you through using MyCalyx.com and avoiding irregularities with the Fees Worksheet.
 
 <input type="button" class="button_Download" value="Download Instructions" onclick="window.open('http://www.calyxsupport.com/downloads/index.htm?tab=1&col6=open#CollapsiblePanel6#TabbedPa nels1')" />
 </td>
 </tr>
 </table>

Tables work that way, that's why CSS styling is preferred for layouts.
http://apptools.com/examples/pagelayout101.php
If you must use tables, try nesting tables inside cells of an outer table .

Table border thickness in PDF

Hi All,
I have developed a report which contains multiple tables. The table borders are
rendered with different weights(thickness) in PDF output. In the RTF output the table
border is of the same thickness. In PDF, this issue is also found the cell border also.
Please let me know if there is an option to avoid this.
Thanks in advance,
Sandesh

Hi Sandesh,
Does the output still look incorrect once the report has been printed. Something else to consider is if you are using nested tables, and both the inner and outer tables have a border set, in the PDF the lines will double up, but it will look fine in an RTF.
If this is the case, then the solution is to take the border off either the inner or outer table.
I hope this helps.
Regards,
Cj

Ecc 4.7 smartform table/template cell border thickness cannot be reduced

Similar Messages

Maybe you are looking for