ECC 5.0 and ECC6.0

Hi SAP Gurus
Can any one please explain the mail differences b/w ECC 5.0 andECC 6.0 in terms of Security implementation/upgrade.
Thanks in advance
KV
P.S : This is kind of urgent. Any information will be appreciated. Thanks

ECC5.0 is ERP2004,centeral component NW04
While ECC6.0 is ERP2005 centeral component NW04s ,it comes with EP,WAS & Etc.
Message was edited by:
saumin oza

Similar Messages

ECC 5.0 AND ECC 6.0

Hi Guru,
Can anyone tell me the functionality difference between ECC 5 .0 and ecc6.0.
Regards
Ananthi.M

Please explore
http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english
Source release version: mySAP ERP 2004
Target release version: SAP ERP 6.0
Solution area: Human Capital Management
Source: http://solutionbrowser.erp.sap.fmpmedia.com/

Any defference display icon between ecc and ecc6

Hi,
any defference between ecc and ecc6 to display ICON
my problem is i was run the one program in ecc then output shows with icons.
same program run in ecc6 output is same but ther is no icons like ecc
Regards
naresh

Hi
Good
Yes you could find some new icons in between ECC and ECC 6.0 but I dont think there is lots of difference between these two, though you have not mentioned the program name it is hard to give you the correct reply on that, but yes in some standard program cases you may find this kind of problems.
Thanks
mrutyun^

Difference Between SAP ECC 6.0 and SAP Solution

Dear Experts,
   We are in the process of implementing a new SAP Structure.
    We are taking a hosted model from vendor which is called SBH (Subscription Based Hosting) of SAP Solution
So my question to all experts is that, what is the exact difference between SAP ECC 6.0 and SAP Solution SBH model.
   If any comparison chart, it would be helfull.
Do reply asap.
Thanks in advance,
Nilesh Jain

Hi Nilesh,
Looking at the image below, you will find out that ECC6 is under SAP ERP, and SAP ERP is under SAP Solution:
SAP solution is of a bigger element and ECC 6 is a component of it.
Regards,
Rod

Any Link with SAP BI and ECC6

Hi..
Is there any Direct Link between SAP BI and ECC6.
Regards
Lakshman

Again very common...
SAP BW (term BI is used for fronted tools) uses SAP API (SAP R/3 Plug-In) technology to connect SAP's sourec systems like ECC (R/3), mySAP components, etc... Check out more about this topic @:
http://sapport.blogspot.com/2008/06/bicont-pibasis-st-pi-pi-r3-plug-in-see.html

ECC 5.0 and CRM 7.0 Integration Questions

Hello,
We are on ECC 5.0 and are part of a global implementation that is putting in CRM 7.0.
We have a couple of issues/questions.
1. We want to integrate ECC Internal Orders with CRM Contracts and Orders. However we don't see the ECC Internal Order type SAPS in ECC 5.0. What release/plugin would give us SAPS Internal order type
2. We currently use CS and PM in ECC, and we have equipment and func. locations. Do we need to be on a certain version/plugin to integrate Equipment and Func. Locations with CRM iBase?
3. Any tips/suggestions on integrating Vertex with CRM for taxes.
Thanks
chris

Hi
Here are the Answers
1. We want to integrate ECC Internal Orders with CRM Contracts and Orders. However we don't see the ECC Internal Order type SAPS in ECC 5.0. What release/plugin would give us SAPS Internal order type
- This is release indepedant- It is been available from R/3 4.7 so you should have it, if you dont have an SAPS order type, you have 2 options
1. Create your own SAPS Order type
2. Define RFC from Client "000" and push the order type. This must be available in "000" as a standard delivery, may be your Basis did not move the order types properly.
2. We currently use CS and PM in ECC, and we have equipment and func. locations. Do we need to be on a certain version/plugin to integrate Equipment and Func. Locations with CRM iBase?
Yes you can have the equipment and Functional Locations, but for FLocs to download to CRM you need ECC6.0 with Sp6 anything below cannot be integrated or downloaded with CRM7.0 .. for Equipments any versions are fine and you do all configuration and customization in CRM
3. Any tips/suggestions on integrating Vertex with CRM for taxes.
Its a broad question, SAP provides standard integration option to vertex, and you integrate as needed..
let me know if you need anything else.

Differences in 4.7 and ECC6.0.

Hi,
What are the major differences between 4.7 and ECC6.0 for HR module from technical side. How many HR related Enterprise Services are exposed. Do we have any other services for ESS and MSS packages.?
Thanks,
Uma....

Dear Uma,
Please check the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please award points if found useful.
Regards,
Rakesh

Differences between 4.7, ECC 5.0 and ECC 6.0

Can anyone tell me the differences between versions 4.7, 5.0 and 6.0 with regards to HR?

Hello,
Have a look at these links.
http://abdurohman.wordpress.com/2007/06/29/whats-new-in-ecc5-and-ecc6-ecc7/
Diff. between SAP 4.6c, 4.7 & ECC 5.0 versions
Regards,
Manoj.

What is the difference between 4.7c and ECC6

Hi
What are the major differences or the best features in ECC 6.0 for our ABAP
Regards
laxman

hi Laxman,
you can check this for some info
chk this
Difference b/t ABAP4.7 and ECC6.0.
Message was edited by:
Chandrasekhar Jagarlamudi

Difference between ecc 5.0 and 4.7 or earlier in MM

Hello masters,
would you briefly explain the diffrence between ecc 5.0 and 4.7. as per MM module is concerened ,any document or link given will be appriciated .
Thanks in Advance,
Suresh.

Please check these links...
Upgrading notes 4.7 Vs ECC6
Solution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
ECC 5.0:
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Thanks
Senthil

Default Clients in R/3 4.7E, ECC5.0 and ECC6.0

What are the Default Client in R/3 4.7E, ECC5.0 and ECC6.0? ECC stands for what?
am little bit confused! some r saying three (000,001& 066) n some r saying two (000 & 066).
Pl correct me.

> What are the Default Client in R/3 4.7E, ECC5.0 and ECC6.0?
Check transaction SCC4.
> ECC stands for what?
Enterprise Core Components
> am little bit confused! some r saying three (000,001& 066) n some r saying two (000 & 066).
Check SCC4. Older installation had two clients (000 and 066), newer installation have a default client (001) already installed.
Markus

Upgrading SAP ECC 5.0 to ECC6 phase GETSYNC_PREUP_FINI_D

I'm in process of the Upgrading SAP ECC 5.0 to ECC6 And, now it is in upgrade phase GETSYNC_PREUP_FINI_D. But, phase in GETSYNC_PREUP_FINI_D the Upgrade already runs to 24 hours.
============================================
The following START modes are available:
- Repeat phase GETSYNC_PREUP_FINI_D to continue
   the upgrade at the point it stopped.
- Initialize phase GETSYNC_PREUP_FINI_D to restart
   this phase from the beginning.
- Initialize and run another upgrade phase
   (caution, refer to your installation guide).
- Exit this program.
> repeat
>> 2008/10/22 11:49:04 UPGRADE/SWITCH: START OF PHASE GETSYNC_PREUP_FINI_D
The parallel running J2EE upgrade needs some more time...
Please be patient...
===============================================
Database: MSSQL2005
What could be the problem. I can skip it and go to the next stage???
Please help me out solution.?
Regards
Marcelo P. Silva

It seems that you have a combined upgrade - ABAP + Java in your system - is that right? If yes, did you start the Java upgrade in parallel?
Markus

What is difference 4.7 business area and ECC6 business areas

hi
plz tell me what is difference 4.7 business area and ECC6 business areas
thank u
shusma

Different is there for 4.7 & ECC
Ex: you select Business area Zero Chebox in ECC .
1 - Debit Balance and Credit Balance should be the same with Business Area
Expences Dr MUM 500
Cash CR MUM 500
Business Area MUM it should be the Zero
2 - In 4.7 System not control Business Area wise Zero Values
Expences Dr MUM 500
Cash CR HYD 500
System not control BA wise Balances
Regards,
Viswa

Connection with Netweaver and ECC6 how to??

Hi SDNers
I am doing research at the possibilities of SAP Netweaver CE 7.1, I want to set up a small "Live Demo" where my netweaver is connected with my ECC6
For example, i made a process with some validations where i want to insert new employee data, like address Name, Last Name.
How can i connect with my ECC6 so that the data I fill in is saved in SAP, I don't have much experience with SAP, I know I need a web service to make the connection if I'm right, how can I make / generate the web service.
Can you give me some directions,
Thanks
Robin

Robin,
at sender you can use Webservice or File or any source to provide data to PI..
lets take
Webservice -->SAP PI 7.1 -->ECC 6.0
At sender(Webservice ) you will use SOAP sender adapter and reciever (ECC 6.0) you can use either RFC(Remote function call) or ABAP Proxy..
to have communication between PI 7.1 and ECC6.0 you should have the following..
RFC Connections in SAP PI7.1
SAP ECC6.0 -ABAP connection User: IDOC_BASIS
INTEGRATION_DIRECTORY_HMI- HTTP connection to ABAP system - user: PIISUSER
INTEGRATION_SERVER - User: PIAPPLUSER
LCRSAPRFC- TCP/IP
RFC Connections in SAP ECC6.0
SAP PI7.1 - ABAP connection - PIAPPLUSER
INTEGRATION_SERVER- Http connection to ABAP system- user: PIAPPLUSER

Diff between ECC5.0 and ECC6.0

Hi,
This is Ramakrishna,can any one give proper explanation diff between ECC5.0 and ECC6.0
Regards
Ramakrishna

Hi,
Refer following link;
[SAP ERP Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/]
Following are the basic differences as far as MM Module is concerned;
Pickup list - Batch where-used list display in transaction MB56
u2022 Until release 4.7, the top-down and bottom-up analyses in the function pickup list for batch where-used list (transaction MB5C) were displayed only in the form of simple output lists. As of release 6.00 of SAP ERP Central Component, the function pickup list for batch where-used list branches to the batch where-used list itself (transaction MB56).
u2022 In addition, user can define how the data in the batch where-used list is displayed, in the initial screen.
u2022 User can use all the settings available in the batch where-used list. For example, he can expand transfer posting or display vendor batch. However, it is not possible to limit the selection to valid plants in the initial screen of the pickup list.
Usability enhancements for transaction MIGO for the posting of goods movements
u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
u2022 User changes the default values in the menu path "Settings -> Default Values."
u2022 Goods movement is monitored with reference to a material document. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
- Goods receipt
- Goods issue
- Transfer posting
- Remove from storage
u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
New report : display list of invoice documents (MIR5)
u2022 Logistics invoice verification offers a new report display list of invoice documents (RMMR1MDI), w hich user can use to display such a list (Transaction is MIR5).
u2022 As an addition to the existing program invoice overview (transaction code MIR6), user have extended selection criteria and display options. For example, on the initial screen user can make selections by one-time customers, invoice gross amount, and entry date.
u2022 User can also show an expert mode, which enables him to select at plant level by FI document, GL A/c posting, and Material Posting.
u2022 In the output list, the report shows both posted and held invoices.
u2022 It does not show invoices without a corresponding FI document; such as invoices planned for verification in the background or which the software has already verified as containing errors.
Requirement prioritizations in materials management
u2022 With Requirement Prioritization functionality user can assign requirement urgency at item level in purchasing and reservation documents.
u2022 The software determines the relevant requirement priority (overall priority) of a material requisition from the combination of requirement urgency group and organizational priority.
Mass maintenance of outline agreements
The following two transactions available:
u2022 Mass maintenance for contracts: transaction code MEMASSCONTRACT
u2022 Mass maintenance for scheduling agreements: transaction code MEMASSSA
Commitment plan for purchase contracts
u2022 With the function of the commitment plan for purchase contracts, it is possible to pre plan value consumption for a purchase contract.
u2022 To this end, a commitment plan is generated for each document item of the relevant contract.
u2022 This commitment plan itself can have any number of items.
u2022 User can define a value and a validity date for each commitment plan item.
u2022 This enables user to pre plan different values for different periods of time.
u2022 The software generates an earmarked fund document for a defined commitment plan item.
u2022 This earmarked funds document can in turn contain several different items with different account assignments.
u2022 The software adopts these account assignments from the item account assignments of the commitment plan.
u2022 If a purchase requisition or purchase order references this contract, the earmarked funds document is copied into the purchase order, and the account assignment is adopted from that document.
u2022 Account assignment to a different account assignment object is then no longer allowed.
Availability check in "Enjoy purchase order and requisition"
u2022 Display and checking of availability are invokable separately in the "Enjoy purchase order and requisition" function, in line with the software behavior on the sales side.
u2022 User invoke the display and checking of availability in the "Enjoy purchase order" function (transaction code ME21N) and the "Enjoy purchase requisition" function (transaction code ME51N) as follows:
- To display the availability overview, choose the menu path "Environment -> Availability." - To check availability, choose the "Check Availability" icon.
- Until this release, if user carried out the availability check for an item of a stock transport order, the software adopted confirmations as per the desired date/time only.
u2022 Two settings are possible with availability check:
- Confirmation as per desired date/time (this is the standard setting and corresponds to previous software behavior)
- Delivery proposal - Full confirmation
External services: putting service items in the purchase order on hold (changed)
User can put purchase orders with service items on hold if these items do not contain any errors. Purchase orders with service items can also be put on hold if errors occur only at header level or as a result of the availability check.
Customizing transactions OX18 replaced by view
The assigned customizing transactions have been replaced by the following view in the following implementation guide activity in customizing for the enterprise structure: Assign plant to company code: transaction OX18 replaced by view V_T001K_Assign. One will find this activity in the implementation guide under the menu path "Enterprise Structure -> Assignment -> Logistics General -> Assign Plant to Company Code."
Goods receipt: new movement types in inventory management
The following new movement types are available in inventory management:
- 107: Goods receipt to valuated goods receipt blocked stock
- 109: Goods receipt from valuated goods receipt blocked stock
Prepayment of invoices
This functionality is characterized as follows:
u2022 User can trigger prepayment of vendor invoices in logistics invoice verification.
u2022 User use the prepayment function for vendors with whom organisation has a good, long-standing relationship.
u2022 The function enables payment soon after issue of the invoice and full exploitation of the date of required payment and existing cash discounts, by posting the vendor liabilities, taxes, and cash discounts in financial accounting in advance.
u2022 The software executes the payment of the invoice regardless of the relevant goods receipt and the outcome of the invoice verification check.
u2022 Most logistics invoice verification standard functions are not affected by the prepayment function.
u2022 When the software posts invoices, it continues to execute the standard checks.
u2022 If the software has already posted the prepayment document, user can make only restricted changes to the header fields of the invoice.
u2022 To ensure adequate and orderly financial accounting postings, a prepayment clearing account has been added to SAP ERP Central Component.
u2022 Upon prepayment, the software debits this account and then settles the account again after executing the check.
Purchasing accounting information to the former SAP Business Information Warehouse
u2022 With the transfer of the purchasing account information to the former SAP Business Information Warehouse component (whose functionality is now part of SAP Net Weaver), it is now possible to maintain Info Cubes, reports, and queries that can determine how and where the costs from purchasing documents have been assigned and controlled.
u2022 As part of the software, a new data source (2LIS_02_ACC) has been created and the purchasing extraction process extended to cover the account information for purchasing orders, schedule agreements, and contracts.
Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
u2022 A new report (RMMR1MDC), available within the logistics invoice verification, can be used to automatically settle planned delivery costs.
u2022 To invoke the report, from the SAP easy access screen, choose the menu path "Logistics -> Materials Management -> Logistics Invoice Verification -> Automatic Settlement -> Automatic Delivery Cost Settlement" (transaction code MRDC).
u2022 Functionality for report RMMR1MRS is enhanced.
u2022 User can use the report RMMR1MRS, "Evaluated receipt settlement with logistics invoice verification (LIV)" (transaction code MRRL), to settle planned delivery costs in addition to goods and service items within logistics invoice verification.
u2022 To do so, set the relevant indicator on the initial screen of the report.
Parking service items
It is now possible to put service orders without errors or with commitment errors on hold.
Report MB5B : Stock on Posting Date
u2022 This Report is available with u201CNon-Hierarchyu201D display option which provides details of Opening, Receipt, Issue and Closing balances of Stock with quantity and value both for a given period.
u2022 This functionality is not available in Release 4.7.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location

ECC 5.0 and ECC6.0

Similar Messages

Maybe you are looking for