ECC 5.0 and EP7.0 SP9 compatible
Hi Experts,
I am trying to implement ESS and MSS on ERP2004 and NW2004s SP09 (EP7.0) SP09. are the versions supported? where can i find the respective XSS component versions for EP7.0 SP9?
to implement the BPs ESS 60.2, the online documentation says.
Primary Backend System
SAP - ERP 2004
Portal Release
NetWeaver '04 (SP Stack 03 and higher), <b>NetWeaver 7.0 (2004s) (SP Stack 04 and higher)</b>
iView Runtime Technology:
Java / WebDynpro (WAS 6.40 and higher)
Thanks for sharing that note Rajendra, it's a very helpful one to have on hand.
I'm going to reiterate my point here because these things should be carefully considered and blindly going with the latest version of things isn't always the right strategy.
Ask what it is about EP7 that you really MUST have that is not available in EP6? As per my earlier note, it is generally best to stick to the platform made for your release.
Also, for setting up the development environment, whatever version you end up going with you can use the 04s version of NWDI (Strongly suggest 64bit here so you can allocate 2 or 3gb of memory to the node) for development but you will need the 04 version of NWDS for developing. This is due to the recommendation to develop using tools from the same product release of your development. I'm not sure how this fits if you use EP7.0.
Similar Messages
-
Installing XSS (ESS and MSS) on EP 7 and ECC 5.0 (and ECC 6.0)
Hello,
I need to install XSS (ESS and MSS) on EP 7.0 SP9 and ECC 5.0 and also on ECC 6.0.
I do NOT know what steps I need to perform (installations & configurations).
Could anyone please help me ?
Is the procedure different between ECC 5.0 and ECC 6.0 ?
Please, help.
Kind regards,
GilHello Gil,
1) As I wrote in my second posting, I think I installed the EP 7.0 correctly for XSS and the BP ERP for ERP2005.
Where can I find what configurations I need to undertake and what patches I should install so the XSS and the BP will work correctly ? (that is besides getting error messages when using an XSS iView)
<b>You need to install the foloowing Web Dynpro Components in ur J2EE server.
PCI_GP
MSS</b>
2) If the projects decides NOT to upgrade to ERP 2005 BUT to stay with ERP 2004, do I need to install the EP 7.0 ALL over AGAIN ?
If so, how do I install both the BP ERP 2004 and XSS on it in ONE installation (as I performed in for the BP ERP 2005) ?
If NOT, how do I uninstall the BP ERP and XSS of the ERP 2005 and install those for ERP 2004 ? OR does the BP ERP 2005 support ERP 2004 as well ?
<b>The pre-requiste for BP ERP2005 is a backend ERP2005. So it will not function with backend ERP 2004.
You don't need to uninstall anything. Just download the Mysap ERP 2004 BP and do the necessary configuration to connect it to the BACKEND ERP 2004.This will solve the problem.
You can find the configuration guides and other information abt the BP here.
https://websmp205.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000687949& --> Click on Documents -> Manager Self service.
Hope this solves ur problem.</b>
Regards
Deb
[Reward points for helpful answers] -
Hi Friends,
I have configured EP7.0 with SP level 9. Now i m going to implement ESS. I have seen ESS latest sp level is 11. So i thoght to use ESS600 SP11 for my portal which SP level is 9. Here my doubt is, can i use ESS 600 SP11 BP for my EP7.0.....
Kindly let me konw.
Thanks & Regards
RenuHi Bala,
Here i m not asking wer can i get BP's... My doubt about the compatibility....
For EP7.0 SP9 is compatable for ESS600 SP 11 or not?
And also the path wat u hav provided was wrong...
This is the Correct path i blive
[http://sdn.sap.com/irj/sdn/contentportfolio] -
Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM
Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich WortmannI would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use. -
Is Office Home and Business 2013 fully compatible with Sharepoint Online (Office 365)?
My client recently upgraded 3 Windows 7 PCs (2-32 & 1-64-bit OS) from Office 2007 32-bit (which was actually working fine against Exchange/SharePoint Online) to Office Home and Business 2013 (32-bit)
Now, for all 3 PCs, while Office 2013 Word/Excel can open, check out/in, and save SharePoint Online files, there is ALWAYS a 2 minute delay in closing the file which is apparently waiting for the Local Security Authority call to return. This seems
to indicate an issue related to SharePoint security on the client side.
Problem Event Name: AppHangXProcB1
Application Name:
WINWORD.EXE
Application Version:
15.0.4657.1000
Waiting on Application Name:
lsass.exe:lsasspirpc
This is the Local Security Authority Security Support Provider Interface Remote Procedure Call (LSA SSPI RPC)
My client has 66 licenses for SharePoint Online (Plan 2) and 73 Exchange Online (Plan 1) "stand alone" services. The same failure is happening on 3 Win 7 PCs. All of which I've carefully reviewed against the MS Office trouble shooting guides (start
Windows OS w/out non-MS services, Word/Excel safe mode w/out add-ons, O365 readiness checks, Office repair, etc.). We have PCs running Win 7 (32 & 64-bit) w/Office 365 ProPlus & Office Professional Plus 2013 that work fine. it's JUST these 3 Win 7
PCs that were upgraded from Office 2007 to Office Home and Business 2013 that have the 2 min. SharePoint file close time.
Can you please confirm that Office Home and Business 2013 is compatible w/SharePoint Online
at least for Excel and Word?
The "slow close" problem can be demonstrated on multiple site collections/sub sites and w/Excel & Word docs in doc libs and lists
After many hours capturing information, following the MS Office trouble shooting guides, and repairing the Office install, I've had no luck in resolving this.While Word/Excel will eventually close SharePoint Online files after about
2 minutes, this is certainly unacceptable. Otherwise, locally stored files close normally and new files were created by the Office 2013 Excel/Word for this testing.
Any thoughts or guidance would be appreciated.Hi raygabe,
I couldn't find the document mentioned there is any compatibility between Office365 SharePoint online and Office Home and Business 2013 version, I would recommend that you check if the issue could be reproduced on other Win7 machines installed with Office
Home and Business 2013 installed directly instead of upgrading from Office2007, see if issue is related to Office application upgrade.
I also recommend that you post this issue on our dedicated Office365 SharePoint online forum and Office 2013 forum for a better assistance with more experts regarding this issue from the following links.
http://community.office365.com/en-us/f/154.aspx
https://social.technet.microsoft.com/Forums/office/en-us/home?category=officeitpro
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you havefeedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support -
I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?
Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd
-
I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
Install ECC 6.0 and Solution Manager on same server Error (MaxDB/Linux)
I have installed Solution manager on one server and then ECC 6 also in the same server with another SID. during the installation it errored out at phase "SLD configuration" with UME error , J2EE_ADMIN locked etc..we checked the user id and noticed it got locked in ECC 6 system and we unlocked it.
But after the ECC installation the solution manager java engine is not coming up error with "com.sap.security.core.ume.service failed" error. Prior to the ECC installation the Solution Manager J2EE was working.
thanks in advance
Mathewerror in the /j2ee/cluster/server0/log/defaultTrace.1.trc
is as follows
#1.5#00137256A483001E0000001700006F190004163784D40864#1150327614343#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_61##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
When I looked at using jcmon the dispacher is up and the server0 and SDM is down -
Are Acrobat 7.0 Standard and Windows 8.1 compatible?
Trying to install Acrobat 7 from cd onto new pc windows 8.1
Gets to the point where it says installing acrobat but installation never progresses
Retired and only really need to use it occasionally now so don't want to buy newer version if can be avoidedIn purchasing Win 8.1 (and probably a new computer), you have effectively made some of your software obsolete. If AA 7 installation is successful with Acrobat and Distiller, you will still have to create a work around as the Adobe PDF printer drive and AcroTray are neither compatible with Win 8.1. You might try to install it in XP compatibility mode. The drivers I mentioned will still probably fail.
-
Difference between ECC 6.0 and earlier versions
Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advanceUnicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
Error:
OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
Solution:
OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
CHARACTER MODE addition.
Error:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
Error:
IF USR02-UFLAG O YULOCK.
Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
X u2013 Hence the error. So we define a new variable ZULOCK and assign the
value of USR02-UFLAG to ZULOCK.
New variable
DATA: ZULOCK(1) TYPE X. "APBRP00
Assign value
ZULOCK = USR02-UFLAG.
Compare -
IF ZULOCK = YULOCK. u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
another data type where one of them is type string .Hence the error occur,
so the data type of ht is been change to Type u2018Cu2019
OR
A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
Error:
DATA: BEGIN OF ht,
x(1) TYPE x VALUE '09',
END OF ht.
Solution:
Define Class after the Tables definition.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Data Defination : Comment internal table HT and define a variable HT type C.
* Insert + APRIA00 05/02/2007 Unicode project
* DATA: BEGIN OF ht,
* x(1) TYPE x VALUE '09'
* END OF ht.
* Insert - APRIA00 05/02/2007 Unicode project
DATA HT type C.
Before using HT assign Horizontal tab.
Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name u201C#LINESu201D
Error :
#LINES TYPE I,
Solution : Since the # is used in the start of name, it is not allowed. We need to
remove it.
Solution for the above
V_LINES TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
Error:
OPEN DATASET PATH_NAME IN TEXT MODE.
Solution:
Download = OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
Upload = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
Error:
data: begin of tab, "Excel Parameter Split at TAB
t type x value '09', "Tabulator
end of tab.
concatenate 'Material' 'Package Status'
into z_download-line separated by tab.
( In the above command the two field are to be separated with a horizontal Tab. The earlier way of assigning the tab value u201809u2019 will not work in Unicode environment.
Solution:
Define a class just after the Table defination.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Define variable Tab as shown below :
Data : TAB TYPE C.
Before the concatenate statement assign the value of Tab using pre-defined attributes.
TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
enabled; use the class cl_gui_frontend_services
Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
call function 'WS_DOWNLOAD'
exporting
filename = zfilename
tables
data_tab = z_download.
Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
FILENAME = zfilename
TABLES
DATA_TAB = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
The name of a namespace must be at least 3 characters long.
Error :
U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
Solution :
* Special character can not be used to define a data variable
* U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
U_N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
* Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
"LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
of a Unicode character.
Error : This error is encountered when data from one internal table is copied to another
internal table which different structure. In this case its LP_TAB & CS_TAB.
LP_TAB[] = CS_TAB[].
Solution :
* Replace + APSUS02 07/02/2007 Unicode Project
* LP_TAB[] = CS_TAB[].
move-corresponding CS_TAB to LP_TAB.
* Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
addition.
Error : Range need to be specified as an addition to the command.
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
Solution :
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
* Insert + APSUS02 07/02/2007 Unicode Project.
RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
Path not found when downloading to Unix directory.
Error : PARAMETER: outfile(92) DEFAULT
'/CP/interface/NPP/data/MX/cbslaprcpts'
LOWER CASE,
kmxmstrd AS CHECKBOX.
This error is encountered when the path is missing. The above path is related to CCP.
Solution: For testing purpose comment the original path and replace it with
/CP/interface/CCD/Unicode_test/
E13. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode- enabled; use the class cl_gui_frontend_services
Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
Call function 'WS_UPLOAD'
Exporting
Filename = zfilename
Filetype = u2018DATu2019
Tables
data_tab = z_upload
Exceptions
Conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
others = 9.
Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
* i_line_header = ' '
i_tab_raw_data = it_raw " WORK TABLE
i_filename = zfilename
TABLES
i_tab_converted_data = z_upload[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14. CURSORHOLD may not be converted into a number.
Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC. -
R/3 upgrade from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0
Is there a reason to upgrade Solution Manager from 3.2 to 4.0 when upgrading R/3 from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0?
And when in current situation Unicode UTF8 is used, could that give problems during / after the upgrade?Hello ALex,
There is not a must to upgrade also your solman 3.2 when you upgrade your satellites, only consider if you need the solman diagnostic or not and also that the new functionality in solman 4.0.
Which system is unicode, the satellite?
There is also not problems having a non-unicode solman with unicode satellites and the other, having a unicode-solman "linked" to unicode-satellites.
Hope this helps,
Dolores -
Data Consistency when Copying/ Refreshing ECC 6.0 and SRM-SUS 5.0 Systems
Hello,
We are planning a refresh / system copy of an ECC 6.0 and SRM-SUS 5.0 system
The refreshes will be completed from backups taken of production systems refreshed onto the QA Landscape.
I have referenced the following SDN thread that provides some guidelines on how to refresh R/3 and SRM systems and maintain data consistency between the systems using BDLS and changing entries that correspond to backend RFC destinations:
[Is there a process/program to update tables/data after System Refresh?;
This thread is fairly old and relates to earlier versions of R/3 (4.7) and SRM (3.0). We have heard that at higher system versions there may be technical reasons why a refresh canu2019t be performed.
Does anyone have experience of completing successful refreshes of landscape that contain ECC and SRM systems at higher SAP versions (ideally ECC 6.0 and SRM-SUS 5.0) Does anyone know whether it is technically possible?
Are there any additional steps that we need to be aware of at these higher SAP versions in completing the copy to ensure that the data remains consistent between ECC and SRM?
Thanks
FrancesI have seen this somewhere in the forum: See if this helps you
BDLS: Convertion of logical system (SRM).
Check entry in table TWPURLSVR.
Check RFC connections (R/3 and SRM)
SPRO, check or set the following points:
Set up Distribution Model and distribute it
Define backend system
Define backend sytem per product category
Setting for vendor synchronization
Numbe ranges
Define object in backend sytem
Define external services (catalogs)
Check WF customizing: SWU3, settings for tasks
SICF: maintain the service BBPSTART, SAPCONNECT
SE38:
Run SIAC_PUBLISH_ALL_INTERNAL
Run BBP_LOCATIONS_GET_ALL
Update vendor BBPUPDVD
Check Middleware if used.
Run BBP_GET_EXRATE.
Schedule jobs (bbp_get_status2, clean_reqreq_up)
Convert attributes with RHOM_ATTRIBUTE_REPLACE -
Is Photoshop elements 10 and Premiere elements 10 compatible with windows 8.1?
Is photoshop elements 10 and premiere elements 10 compatible with windows 8.1? I am upgrading from XP and am trying to determine if I should go to 8.1 or windows 7?
MakoM
Photoshop Elements 10 and Premiere Elements 10 are compatible with Windows 8 or 8.1 64 bit. I have them installed on those operating systems and no problems. My video card is Intel HD Graphics.
But, a major question is what video card will be used? There is a major issue with Premiere Elements 10 users whose computers use a NVIDIA GeForce video card. It is fixed by rolling back the driver to about May 2013. This is a user to user fix. Neither NVIDIA nor Adobe has offered one. Full details are the Announcement at the top of the Premiere Elements Forum
http://forums.adobe.com/community/premiere_elements?view=discussions
Overview of that situation
http://www.atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Please let us know if we can be of assistance in this matter.
Thank you.
ATR -
Difference Between SAP ECC 6.0 and SAP Solution
Dear Experts,
We are in the process of implementing a new SAP Structure.
We are taking a hosted model from vendor which is called SBH (Subscription Based Hosting) of SAP Solution
So my question to all experts is that, what is the exact difference between SAP ECC 6.0 and SAP Solution SBH model.
If any comparison chart, it would be helfull.
Do reply asap.
Thanks in advance,
Nilesh JainHi Nilesh,
Looking at the image below, you will find out that ECC6 is under SAP ERP, and SAP ERP is under SAP Solution:
SAP solution is of a bigger element and ECC 6 is a component of it.
Regards,
Rod -
Differences between SAP 4.7, SAP ECC 5.0 and ECC 6.0
Hello SAP Gurus,
Could someone please let me explain, what are the main differences between SAP 4.7, SAP ECC 5.0 and ECC 6.0.
Thanks
ShaHi,
Check in this link
http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english
Maybe you are looking for
-
Error while deploying BIKit.sda on Portal
Hello Masters, When I select the system for BW from VC Data tab, I get the following error: <b>Error -21007:Search for table returned an error. Service not found: com.sap.portal.guimachine.BIKit.CommandHandler.</b> However I am using VC 6.0 with Patc
-
Losing wireless internet connection
After surfing the internet for a while I lose my wireless connection from my laptop. I have other computers directly connected to the Router that dont lose internet connection ever. Its just my laptop and it drives me crazy. I have to reboot the lapt
-
I am trying to create an enum type Suit as follows: public enum Suit { CLUBS, DIAMONDS, HEARTS, SPADES } I've tried it with and without a ';' at the end, and either way, I get essentially these two errors: Card.java:3: ';' expected public enum Suit {
-
LOAD_PROGRAM_NOT_FOUND RSSTAT10
Dears, after we upgrade our system to netweaver 7.0, we receive the following dumps in the systme: LOAD_PROGRAM_NOT_FOUND Program "RSSTAT10" not found Since neighter the marketplace or SDN seem to have a solution, can someone help me out on this one
-
ICloud email same on 2 different iPad mini devices
I was setting up 2 different iPad minis at the same time with 2 different iCloud emails. The problem is that both the devices now have my daughter's iCloud email as the default mail. How do I get my son's iPad mini to have his iCloud email as defau