ECC 5.0 vs ECC 6.0 - What are its contents ?

Dear Experts,
I would like to know what are the contents in ECC6.0? I am told that ECC 6.0 has all the contents like CRM, SRM and BW and so on.
I tried many websites but did not get a conclusive answer. I would appreciate if anyone can provide me what are the contents that ECC6.0 has ?
My other question is, Can I install CRM-5.0 with ECC 6.0 ? How do I enable this within ECC -6.0?
Your response will be highly appreciated and rewarded.
Thanks

HI,
Just in case others stumble upon this, you can find all the information on what is possible (and not possible) in the SAP ERP 6.0 master guide (downloadable from http://service.sap.com/instguides).
Cheers,
Mike.

Similar Messages

What are the content conversion parameters

Hi All
This link contains the text file.
http://www.census.gov/foreign-trade/schedules/d/dist.txt
what are the content conversion parameters are required to convert that text to xml.

<sen_dt>
     <prefix>
          <heads>
               <dc>
               <pc>
               <name>
          <main>
               <dcno>
               <pcno>
               <name1>
<rec_dt>
     <prefix>
          <District_code>             District code      optional
          <port_code>              port code          1
          <name>                   name
     <main>
          <District_code_no>
          <port_code_no>
          <name1>
content conversion
     document name:<sen_dt>
     document namespace:http::----
     document offset:--
     recordset name:input
     recordset structure:heads,1,main,*
     recordset sequence:Ascending
     recordset per message:----
     keyfield name:---
prefix.fieldfixedlengths:---
prefix.endSeparator:---
prefix.fieldNames;---
prefix.keyFieldvalue:--
prefix.keyFieldlnStructure:---
main.fieldFixedLengths:9,
main.fieldSeparator:|
main.endSeparator:'nl'
main.fieldNames:district code,port code,name
main.keyFieldValue:
main.keyFieldlnStructure:

What are the content conversion parameters for this structure

Hi All,
The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
Schedule D - District/Port List (by District Code) [Produced13APR11]
District |    Port      |    Name
Code     |    Code      |
01       |              |    PORTLAND, ME
         |    0101      |    PORTLAND, ME
         |    0102      |    BANGOR, ME
         |    0103      |    EASTPORT, ME
         |    0104      |    JACKMAN, ME
         |    0105      |    VANCEBORO, ME
         |    0106      |    HOULTON, ME
         |    0107      |    FORT FAIRFIELD, ME
         |    0108      |    VAN BUREN, ME
         |    0109      |    MADAWASKA, ME
         |    0110      |    FORT KENT, ME
         |    0111      |    BATH, ME
         |    0112      |    BAR HARBOR, ME
         |    0115      |    CALAIS, ME
         |    0118      |    LIMESTONE, ME
         |    0121      |    ROCKLAND, ME
         |    0122      |    JONESPORT, ME
         |    0127      |    BRIDGEWATER, ME
         |    0131      |    PORTSMOUTH, NH
         |    0132      |    BELFAST, ME
         |    0152      |    SEARSPORT, ME
         |    0181      |    LEBANON AIRPORT
         |    0182      |    MANCHESTER USER FEE AIRPORT, NH
02       |              |    ST. ALBANS, VT
         |    0201      |    ST. ALBANS, VT
         |    0203      |    RICHFORD, VT
         |    0206      |    BEECHER FALLS, VT
         |    0207      |    BURLINGTON, VT
         |    0209      |    DERBY LINE, VT
         |    0211      |    NORTON, VT
         |    0212      |    HIGHGATE SPRINGS/ALBURG

since in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
Regards,
Ninu

What are the contents in technical spec

what are the contents in technical spec
could u plz explai clearly
with exp spec

hi rajeshreddy,
Below are the standards for Tech specs
1.1 Development Attributes
Program Name:
Title:
Application:
Development Class:
Message Class:
Program Type:
Execution Mode:
Schedule Frequency:
Variant:
1.2 Program Functionality
1.3 Output Fields
Output Label
Related SAP table-field (if any)
Length
Output Characteristics
1.4 Proposed Solutions
1.5 Solution to be implemented
1.6 Reasons of selection/rejection
1.7 Pseudo-Code / Flow Logic of the selected solution
1.8 Selection Screen
1.9 Database Tables Used
Table Name
Table Description
How the table is used in the program
1.10 External Files Used
1.10.1 External File Layout <file name>
1.11 Components External to Program Used
1.12 Error Conditions
1.13 Key Technical Test Conditions
1.14 Sample Test Data
1.15 Assumptions
1.16 Comments
regards,
amit m.

What are the contents in technical specifications

What are the contents in technical specifications
could u plz explain clearly

hi rajeshreddy,
Below are the standards for Tech specs
1.1 Development Attributes
Program Name:
Title:
Application:
Development Class:
Message Class:
Program Type:
Execution Mode:
Schedule Frequency:
Variant:
1.2 Program Functionality
1.3 Output Fields
Output Label
Related SAP table-field (if any)
Length
Output Characteristics
1.4 Proposed Solutions
1.5 Solution to be implemented
1.6 Reasons of selection/rejection
1.7 Pseudo-Code / Flow Logic of the selected solution
1.8 Selection Screen
1.9 Database Tables Used
Table Name
Table Description
How the table is used in the program
1.10 External Files Used
1.10.1 External File Layout <file name>
1.11 Components External to Program Used
1.12 Error Conditions
1.13 Key Technical Test Conditions
1.14 Sample Test Data
1.15 Assumptions
1.16 Comments
regards,
amit m.

Query as Web Services!!! What are its uses and why do we need it?

What are its uses and why do we need it.. if other tools like Dashboard and crystal reports and Webi can connect to universe and create reports and Analytics...

Hello Rajsan Madhavarajan
Query as a Web Service (QaaWS) is a SAP Business Objects (BOBJ) client-side tool that allows users to create and publish Web Services that can be made available over the Web. Once these web services are created and published, they can be consumed like any other standard Web Service in software applications including Xcelsius and Crystal Reports. But first we have to understand what exactly is a Web Service.
Web Service
A Web Service is a software system that supports interoperable interaction over a network from one computer or machine to another but is more commonly defined as a client and a server communicating data over the Web using the HTTP Protocol. Using Web Services along with Business Objects allows a live connection of data to be used in applications such as Xcelsius and Crystal Reports through a semantic layer called a Universe.
Query as a Web Service (QaaWS)
The two main components in QaaWS are the Client Tool and the Server. The QaaWS Client Tool gives the end user an easy to use wizard that allows them to create Universe queries and publish them as Web Services. Once the QaaWS is published, any user can securely access the data that the Web Service contains as long as they have access to that server. Have a look on image below that shows the information flow to and from the server via the client.
Advantages to QaaWS:
Very easy to use and intuitive interface Familiar look and feel for people who have used Web Intelligence
Leverages existing Business Objects Universes Shares metadata with Web Intelligence, Desktop Intelligence and Crystal Reports
Maintains Business Objects Enterprise Security
Allows live data feeds to be incorporated into Xcelsius Dashboards and Crystal Reports

BVI - What is it and what are its uses?

BVI - What is that and what are its uses?

Ranji,
A BVI is in fact quite similar to an SVI (interface Vlan). You can define a software bridging between various ports of a router, similar to switching between various ports on a switch. If the ports on a switch belong to the same VLAN and the switch is capable of multilayer switching, you can create an interface Vlan for that VLAN and allow the hosts in that VLAN to use the IP address of the interface Vlan as their default gateway.
The same goes for interface BVI - Bridged Virtual Interface. When configuring software bridging, you define a group of interfaces that are bridged - the router performs bridging (i.e. software-based switching) of frames between all member ports of a bridge group, in essence forming a single broadcast domain - an IP subnet. If the devices in the common bridge group want to access other IP networks, they need a gateway, so you create an associated interface BVI that is also a part of the bridge group, and devices in the bridge group then use the IP address of the BVI interface as their gateway.
For exampe, imagine a router with two FastEthernet interfaces:
bridge irb!interface FastEthernet0/0 no ip address no shutdown bridge-group 1!interface FastEthernet0/1 no ip address no shutdown bridge-group 1!interface BVI1 ip address 10.0.0.1 255.255.255.0 no shutdown!bridge 1 route ip
This configuration would make your router to basically behave as a 2-port "switch" on its Fa0/0 and Fa0/1 interfaces, and devices connected to these ports would use the 10.0.0.1 as their default gateway to other networks.
You rarely configure bridging exactly this way these days, as switches are orders of magnitude faster and have way more ports. Still, there are situations where you need to bridge two interfaces, taking packets out of frames of one technology and putting them into frames of a different technology, without routing them, just repackaging but still carrying them between interfaces. This is often done in, say, DSL if the router is configured to act in bridge mode - take IP packets coming to Ethernet interface and simply repackage them into PPP or ATM+AAL5 cells on the DSL WAN port (and vice versa).
Best regards,
Peter

What are dotNet store procedurs are what are its benefits

I am new to ODP.NET, I wanted to know what are .NET Stored Procedurs and what are its benefits?

.NET stored procedures allow you to call .NET code from the database.
You can get more info from http://www.oracle.com/technetwork/topics/dotnet/index-085095.html
Hope it helps,
Greg

What is dynpro? what are its components?

hi
what is dynpro? what are its components?

hi
good
Web Dynpro is SAP's development environment for creating professional web user interfaces for business applications. Its model-driven approach minimizes manual coding and uses visual tools to design and reuse UI components. Web Dynpro is based on a powerful and flexible Model-View-Controller (MVC) architecture that ensures a clear separation of user interfaces and back-end services. Developers have full control of the generated code at all stages of the development process. Get an overview of the fundamental concepts of Web Dynpro.
https://www.sdn.sap.com/irj/sdn/was?rid=/webcontent/uuid/063bc942-0a01-0010-e7ae-d138e97acb5a [original link is broken]
Go through this links
Webdynpro wiki
Web Dynpro is a development environment enabling enterprises to model and develop professional applications based on browser technology, including a standards-based, device-independent complete runtime environment.
It bridges the gap between different platforms such as J2EE, ABAP and Microsoft.NET, and between different Internet browsers and mobile platforms.
It allows the developer to define screen and Workflow using Java Server Pages that call ABAP applicatons in the R/3 server. Web Dynpro can be used to provide Web services. This ability means that your Web Dynpro applications can have complete interoperability with the .NET platform.
See the link below for more information on Web Dynpro:
http://epic.hpi.uni-potsdam.de/nwlab/docs/2004-11-01-WebDynpro.pdf
Go through the link below to get an idea how to create applications using webdynpro
http://help.sap.com/saphelp_nw04/helpdata/en/4b/9b3a3e5069eb6ce10000000a114084/frameset.htm
reward point if helpful.
thanks
mrutyun^

IPhoto 9.4.2 update size is whopping 1.15 GB. I have never used iPhoto what are its features and what else can we do with iPhoto?

my previous version was 9.3 I updated my Mac to OSx 10.8.2 and about to finish downloading the update of iPhoto which shows 1.15 GB it took me quite a time to download such large file. I was wondering how can I use this software wisely? what are the features?

http://support.apple.com/kb/DL1608?viewlocale=en_US&locale=en_US
LN

What are the contents of ReportViewer.dll that comes with CalExec?

Calibration Executive comes with code module ReportViewer.dll. What are the function prototypes for the routines in this module? There is no information on the exported functions that can be used by another calling program.

Hey TC99
You can use Dependency Walker to find out which functions are in that DLL.

What is a Firefox "background tab" and what are its full semantics?

What is a "background tab" and what are the full semantics of one?

Thank you ideato! You did exactly as I asked: Explained it simply and step by step. I am fairly intelligent on a lot of things, but technology, especially computers....not so much. I even have the most basic of cell phones, 'cause I don't get the Smart phone thing. So from this old boomer who is admittedly a "techno phobe" (and I know I have to get over that and learn, especially in this world) I appreciate it!
Thank you from the bottom of my techno idiot heart. @;-}
TracyLee

What is bonjour? Is it an app and where can I find it on my new iMac?? what are its uses?

Someone told me that I might be able to chat among Mac computers and I thought it was with Bonjour...is this correct?
Don't see it anywhere on my new iMac?
Thanks!
New to apple computers...any help is appreciated!

Hey mmanno,
Great question. The following resource provides the information you are seeking:
OS X Mountain Lion: What is Bonjour?
http://support.apple.com/kb/PH11449
Bonjour is a networking technology developed by Apple Inc. that makes it easy to set up and use devices and services on a network. Because Bonjour-compatible devices and services advertise their availability, it’s easy for you (or an application or service) to find devices and services that you want to use. For example, if you turn on file sharing, other OS X users on your local network will see your computer when they browse.
For information on using Bonjour to send messages to others on your local network, see this article:
Messages (Mountain Lion): Send messages to people on your local network
http://support.apple.com/kb/PH12013
Thanks,
Matt M.

What are the contents of a withholding tax return?

A buyer normally deducts WHT and pays the balance to the vendor. The vendor then receives a withholding tax certificate from the buyer.
When the vendor files his withholding tax return, will teh withholding tax return only include details of this WHT deducted by buyer or it will include other things? And against what will the vendor set off the amount withheld by the buyer?

Hey TC99
You can use Dependency Walker to find out which functions are in that DLL.

What are the contents of Mac OS X Install Disc 2

I bought my mac a few years ago, and i recently swiped it and wiped it clean again, to make it faster, which it has. When i was installing the CD's, the install dic 1 was fine, but when it said to insert disc 2 to continue the installation my mac wasn't reading it. Therefore i just did not install it. Yesterday i downloaded the disc 2 online, but i wanted to know what the contents were of disc 2 just so i knew what i had, if anyone could help that would be great

Any download of 10.5 discs online is illegal. The only legal means of getting 10.5 is by DVD. Also any downloaded copies may be pre-release data, or data infected with trojans. Stay far far away from those downloads.

ECC 5.0 vs ECC 6.0 - What are its contents ?

Similar Messages

Maybe you are looking for