ECC 6.0 and BI Authorizations in Project Implementation Phase for Dev only

I ) ECC 6.0 Authorizations for Project Team
     I have browsed through SDN and gone through several documents and perhaps trying to post our senario as clearly as possible for better answers
Aim : 1) To give appropriate authorizations to
      a) Functional Consultants
      b) ABAP developers
      c) BI consultants
      in Development environment only on Customizing client,
      sandbox client and unit testing client
There is no inhouse security consultant in house at this time.
Type of Oragnization : Midsize
project Life cycle phase : Bluprint-Realization
Question1:
     What role and profile should I assign to functional consultants by preparing a role from the SAP standard role and what is the best way to restrict functional consultants from sensitive areas.
eg: Modifying SAP_ALL option and assigning it to functional consultants.
II.
BI 7.0 Authorizations for BI consultants in Development environment
Aim: 1) To give authorizations to BI 7.0 consultants (using only ABAP          stack)
Question: I have read through some forum and wiki answers in sdn and many explain that give SAP_ALL and SAP_NEW to BI consultants and in addition give 0bi_all, SAP_BW_DEVELOPER and much more.
    Can some body list what are the needed Roles for this kind of users ?
I know in theory many talk, do not assign SAP_ALL, but the person who advice this never explained the best alternative, and none of them I know have practially told that they have not assigned SAP_ALL.
Please explain . I think asnwering my question will bury many questions in this fourm .

Hi Nick,
Did you get the answer? I'm lookinf for the same information about profiles.
Thanks!!

Similar Messages

ChaRM: switch back project implementation phase

Dear All,
is it possible for an implementation project to switch back the phase (for example from test to development or from golive to Emergency Correction)? Which are the contraindications?
Regards,
Bob

Hi Bob,
- technically nothing is blocking you from that
- functionally: you should just pay attention to what have been done in last phase before switching. As long as transport requests sequence is respected during import (meaning you use ChaRM for imports) there should nt be any contraindication
be aware that by checking table /tmwflow/tpphmac for phase model 'devrl' (that corresponds to implementation project) you ll know what is exactely allowed in each phase of your project type.
SAP Would not recommend changing values in this table though
Regards
Khalil
Edited by: Khalil SERRHINI on Sep 7, 2010 11:01 AM

I have the latest version of firefox and I tried to follow the instructions for cookies, only the instructions seems out of date. How do I fix this?

I have to adjust my cookies and I found the instructions on your site. When I followed the instructions, I found that it seems for an older version and not the new one. The privacy settings are not the same as they once were and I can't make any adjustments to may cookies except to delete them.
What I could do was go to the 'Firefox' tab at the top left corner, go to history, Clear recent history, and so on. I can't make any adjustments to a single cookie. It's all or nothing.
Are there any other ways for me to make the adjustments?

To restore the classic menu bar, you can do any of these:
orange Firefox button > Options > Menu Bar
tap the Alt key > View > Toolbars > Menu Bar
right-click a blank area of the tab bar or navigation bar > Menu Bar

How do I print in black and white? There is no provision for this, only color.

After reading my emails, I want to print some of them in black and white. There is no provision to print in black and white only color.

My printer is an Dell V525W. Thanks. Hope you can help

I have to replace my hard drive as it is failing, I'm away and just bought a new external HD for backups,,only problem is it is fsiling to backup without a reason. Disk utility says ex HD is ok. I need to backup before i get it repaired. Any Advice?

Hi my hard drive is failing and I'm overseas in Thailand. I bought a Buffalo 1TB to back up my mac 13inch HD version 10.6.8, only problem is it wont back up. Disk Utility says ex HD is fine. I need to backup before I take it for repairs. What can I do? Thanks advice appreciated. NL

I think we both had our wires crossed a little.
Then just go ahead and clone your internal drive to your Buffalo. You are not going to use Time Machine, and you do not have to partition it. So ignore all that stuff I posted. Let me start from scratch.
First check that your Buffalo drive is partitioned GUID and formatted Mac OS Extended, Journaled. So open Disk Utility, select the topmost entry for the Buffalo drive. You should see something like this:
I have selected the entry of my CalDigit drive. Note that the Partition Map Scheme is GUID. Now, select the volume (mine is "System Backup."
Here you see it is a Format type of Mac OS Extended, Journaled. If that's what you see then you are good to go.
With Disk Utility still open:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it to
the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the Buffalo drive. Source means the internal startup drive.

Open and work on FCP project file located at xsan volume

It is recommended by apple to *open and work on FCP project file located at xsan volume*
or we should open , work and save our FCP project file from local drive only .
Is there is risk of corrupting xsan volume if we open FCP project file placed in xsan volume .
where should be the location of FCP project files ??????
Mac pro 2.66 , FCP 6.01, xsan 1.4

Opening a file twice is a indeed a problem. To prevent this, and for numerous other reasons, we use Open Directory. In OD you can configure that a user can login just once (concurrently).
In old versions of xsan it was not recommended to put project files on xsan, but nowadays it works fine.
Putting projectfiles on a san has the advantage that a user can work on any client. If this is not important in your environment these files can be stored locally.

In SAP BW landscape we should have separate servers for DEV, QA and PROD

Hi all,
In SAP BW system landscape we should have separate servers for DEV, QA and PROD.
whether one server is enough for DEV and we can use virtual servers to QA & PROD?
Regards,
chandu

Hi chandu,
In my previous Organisation we got exactly the same landscape for BW as you described.BCS(BAYER COPSCIENCE LTD) operates a BW System Landscape with one centralized Global Development System and three regional Quality Assurance and Production Systems located in Europe, Asia Pacific and Americas. This Landscape is to ensure consistent data models to be available in all regional systems as well as to minimize development efforts and make use of respective synergies.
This is perfectly working for BCS ,and I think, this is the most approriate way of handling of resources.
Regards
CSM Reddy

Hyperion License for DEV and QA

Hi, I like to know if anyone out there is using Windows Server forHyperion and Oracle on AIX as DB. How have you applied the licensing for DEV and QA ? Is ita separate license for DEV and separate license for QA. Thanks Azmat Bhatti 

Hi,
Its simple. Check your Output Type in SPAD. where in also check the printer driver name. printer drivers is named in the SAP system with unique four character
code, such as STN2.
The default will be SWIN: Windows (SAPlpd/SAPWIN). Compare your Dev System.
Feel free to revert back.
--Ragu

Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich Wortmann

I would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use.

SAP Support for Classic G/L in ECC 6.0 and above

Hello,
Running an SAP upgrade project from 4.6C to ECC 6.0 (EHP6). The customer is running the existing release since the past 8 years with FI/CO, MM,SD,PM and HCM modules.
We are exploring the possibilities and repercussions of moving on to new G/L from the legacy classic G/L. Please have a look at the mentioned points for replies accordingly.
1. As far as I understand, if need to seamlessly transit in the ECC 6.0 with New G/L in a way that the old transactional data, and all balances are retained with historical records, then we need to purchase the SAP New G/L Migration Services, and this would be lead and done by SAP. There is no alternate way of doing it solely by our ownself, Is this correct ?. If we engage SAP for this migration exercise and consulting then does it ensure that all historical data and balances are moved intact in the new G/L environment and from an end user perspective all transactional done to date before moving in ECC 6.0 are retained.
2. I guess we still need to review the integration impact of the new G/L for all other modules, is there a substantial rework to be done or with minimal effort, new account assignments and related configuration can be altered .
3. If we don't opt for SAP G/L Migration service but still want to activate and use the new G/L and profit center accounting, then as far as myself and my team assess, we need to decide a cutover date and gather the balances/open items from the legacy G/L and upload them to the new G/L in ECC 6.0, just as it would be the case for a fresh new implementation for a customer coming from non-SAP environment. If this is correct then :
The customer will lose all historical, detailed transactional data with respect to the legacy G/L and relevant originating entries. In such case for any business reporting requirement, the customer has to keep a separate PRD server alive in a dormant state for fetching the data before the transition in ECC 6.0 environment. Is this the correct understanding and the only possible approach, can there be a better way of ensuring the availability of historical data.
In such a case of doing a cutover data migration from old G/L to new G/L, do we have to upload the rest of the master/transactional data for all other modules as well, enacting a situation that all of them started as fresh new modules in ECC.6.0, or the legacy master / transactional data for all other modules can be kept intact for historical purposes. (examples, all vendors and PO / sales order and customer master / employee master and all payroll historical records for past 8 years).
4. Any indication or official SAP note, that for how long SAP intends to support the legacy G/L in the upcoming ECC versions. It is necessary to know in case the customer currently opts for still continuing with the classic G/L in ECC 6.0 , but we have a lurking danger that SAP would stop the support and availability of legacy classic G/L in the near future. So to a have a long term sustainable benefit, we might deliberate with the customer to take a bitter sip now , and move on to the new G/L with all its bells/whistles and the nuisances it might bring in terms of historical transaction data unavailability.
I hope i was able to make my scenario clearly understandable for having some valuable input from the forum members.
Thanks a lot for reading and replying.

Hi Syed,
From Technical basis perspective there is not much work in newGL migration apart from application and database tuning.
Time taken for migrating to newGL will depend upon number of open items available in the system at the time of migration.
Most of your queries are functional and suggestion would be to move this thread to ERP Financials.
For your information you may go through below links
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ae/b3569044974c6985c4e711e20435d6/content.htm
http://wiki.scn.sap.com/wiki/display/ERPFI/NewGL+Migration+Scenarios
Hope this helps.
Regards,
Deepak Kori

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Upgrade -- Sort sequence difference in ECC 6.0 and 4.7

Hello friends,
We are in an upgrade project where the upgrade is from 4.7 version to ECC 6.0 version.
We are facing few problems on sort when testing our Z developments.
Suppose the internal table in the program has fields A, B and C.
We are using the sort statement --> sort itab by A.
In 4.7, the sort statement sorts the internal table first by A and there is no specific sequence followed for B or C.
Whereas in ECC 6.0, the sort happens by A followed by B and C.
So, the final result is, for the user, the output appears different, although the data is the same.
Please let me know how can we make the output in ECC 6.0 appear as in 4.7.
Thanks & Regards
Swapnil

Hello Swapnil,
Check for the SORT keyword in transaction abapdocu. You may see the changes made to the functionality in the newer versions.
Thank You,
Sai

Auth Group for Accounting Doc and Account authorization for Vendors

Hi guys,
I have question regarding Accounting Doc for Vendor and G/l Account. I have a security client whree I build my business roles for end user but we we configuration client where all the functional focus wokring and doing configuration. My questiion when I start creating business roles and start going into these authorization objects and filling up the field values (F_BKPF_BEK, F_BKPF_BES, F_BKPF_BLA).
I won't see auth group that will be c reated by functional cocus because they are working on configuration Client and they probably create auth group for above authorization objects in Config lcient and I'm building Roles in my security client.
If it is true what would be the best way to create business role. I'm in realization face of the project Should I build my roles in Config client? Please advise.
Thanks in advance
Faisal

What is the benefit of a "security client" in DEV? I don't get it...
You anyway need to protect the namespace... and the authorizations for role development (SU24) and admin (PFCG).
Anyway, you have closed your question so we can only lick our wounds now
Cheers and good luck on your project (let is know how it goes if you stick around for long enough to experience a release upgrade...
Julius

Installing XSS (ESS and MSS) on EP 7 and ECC 5.0 (and ECC 6.0)

Hello,
I need to install XSS (ESS and MSS) on EP 7.0 SP9 and ECC 5.0 and also on ECC 6.0.
I do NOT know what steps I need to perform (installations & configurations).
Could anyone please help me ?
Is the procedure different between ECC 5.0 and ECC 6.0 ?
Please, help.
Kind regards,
Gil

Hello Gil,
1) As I wrote in my second posting, I think I installed the EP 7.0 correctly for XSS and the BP ERP for ERP2005.
Where can I find what configurations I need to undertake and what patches I should install so the XSS and the BP will work correctly ? (that is besides getting error messages when using an XSS iView)
You need to install the foloowing Web Dynpro Components in ur J2EE server.
PCI_GP
MSS
2) If the projects decides NOT to upgrade to ERP 2005 BUT to stay with ERP 2004, do I need to install the EP 7.0 ALL over AGAIN ?
If so, how do I install both the BP ERP 2004 and XSS on it in ONE installation (as I performed in for the BP ERP 2005) ?
If NOT, how do I uninstall the BP ERP and XSS of the ERP 2005 and install those for ERP 2004 ? OR does the BP ERP 2005 support ERP 2004 as well ?
The pre-requiste for BP ERP2005 is a backend ERP2005. So it will not function with backend ERP 2004.
You don't need to uninstall anything. Just download the Mysap ERP 2004 BP and do the necessary configuration to connect it to the BACKEND ERP 2004.This will solve the problem.
You can find the configuration guides and other information abt the BP here.
https://websmp205.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000687949& --> Click on Documents -> Manager Self service.
Hope this solves ur problem.
Regards
Deb
[Reward points for helpful answers]

How to check and maintain authorization objects

Hi Alll
Let me knowhow to check and maintain authorization objects in SU24 ECC 6.0.
Thanks
sathies

Hi Sathies,
the old check flags
U
Unmaintained
No indicator set. The check for corresponding authorization object is always executed. Field values are not displayed in the Profile Generator.
N
No check
Check disabled. Field values are not displayed in the Profile Generator. This indicator cannot be set for HR and Basis authorization objects.
C
Check
Check always executed. Field values are not displayed in the Profile Generator. For example: Printer authorizations.
CM
Check/maintain
Check always executed. Field values are displayed for changing in the Profile Generator (yellow light).
Have been divided now in
Checkindicator : Check/NoCheck
and
Proposal: Yes/No.
If defaults=yes, then you can modify them after clicking on the apropriate button.
Please refer to the online help for SU24 too.
Although the look of su24 has been changed significantly, the technique behind it is still the same.
Once you have pressed the 'edit'-button on the top left corner, additional editing options will appear in the right-top-frame.
b.rgds,
Bernhard

ECC 6.0 and BI Authorizations in Project Implementation Phase for Dev only

Similar Messages

Maybe you are looking for