ECC 6.0, BI & EP Installation & Config?

Hi Experts,
I need to install ECC 6.0 , BI and Portal, So i selected ECC and WAS ABAP,WAS JAVA, BI, EPCORE, EP. The installation completed successfully. I am able to login to ECC with clients 000,001 and unable to login to 800, 811 and 812. When i login to SAP EP the default admin user id is Administrator through which i am unable to login and i am able to login with J2ee_Admin where i can not create a user and not able to find any portal user except ABAP and UME users. In the Developer trace i found the DySysAdmExtInit: VMC (JAVA VM in WP) is not active. Can you guys tell me how to solve this problem.
I want to configure ECC with BI and EP.
Thanking you
Regards
Mrudul

From the management/budget saving point of view LPAR is the best way to go. Nowadays the HW is much better than 3 years ago and you can get a well equipped IBM pSeries server with LPAR within budgets. Furthermore LPAR is logically isolated with different HW/SW resource(CPU/Memory /Disk resource, IP/hostname/mount point)...Also the communication between LPARs are faster for sure because they're happening within memory other than physical NIC/cables.
I have seen companies running their DEV/QA/PRD in the same p5 570 box with good performance. By the way, 570 is not the high-end machine...

Similar Messages

ECC 6.0 SR3 Master Installation

I've downloaded the latest version ERP 6 (SR3), the master installation BS_2005_SR3_SAP_Installation_Master (DVD label D51033511).
When execute sapinst the menus for ERP installation only shows the options : RAPID CONFIGURATION and SOFTWARE LIFE CYCLE OPTIONS. Where is the options for install Central system, Distruibuted system or high availability system ? I cant to find how to begin the installation.
The last week I've installed ERP 6 SR2 with master installation BS_2005_SR2_SAP_Installation_Master and its working OK. The same occurs with SRM, SCM, etc on SR3. Have SAP changed the master installation ?
Thanks in advance
Fernando

If you are installing on Windows 32 bit.
Go to this menu path,
SAP ERP 6.0 Support Release 3 --> Software Life Cycle Option > System Copy> Choose your DB engine--> Source System Export >Central System> Database and Central Instance Export
If your environment offers 'only' 32 bit support, you have to set up your
IDES ERP 6.0 ECC 6.0 system not as a normal installation but as a system
copy. And that means, you have to modify your DB-Export-DVDs on disk (see
description below). The 'System Copy' option allows - due to a missing IDES
JAVA-AS Export - to install only the ABAP-AS, a 'double stack' system is
not possible. The standard JAVA AS - if required - has to be installed as a
separate instance.
How to prepare the three Export-DVDs for an installation as a System-Copy
in order to use 32 bit hardware:
Copy all three DB-Export DVDs to disc. They have the structure
- DVD1
EXP1
DATA
DB
- DVD2
EXP2
DATA
DB
- DVD3
EXP3
DATA
DB
EXP4 (not relevant)
EXP11 (not relevant)
Now move all files from DVD2/EXP2/DATA to DVD1/EXP1/DATA
Now move all files from DVD3/EXP3/DATA to DVD1/EXP1/DATA
Now modify file DVD1/EXP1/LABEL.ASC
Change the text line in the file with an editor from
SAP:ECC:600SR3:EXPORT(1/11):Installation Export:CDxxxxxxxx_1
to
SAP:MIG::EXPORT(1/::*
Now start sapinst from the Master-DVD with the option:
SAP ERP 6.0 Support Release 3
Software Life-Cycle Options
System Copy
<Database Software>
Target System Installation
29.10.2008 Page 3 of 4
Note 1244548 - IDES ERP 6.0 ECC 6.0 SR3
Central System
Based on AS ABAP
Central System
and Next
This option allows still an installation on 32 bit hardware and/or 32 bit
operating systems.
When SAPinst asks for the 'Installation Method' choose
'Standard System Copy / Migration (load based)'
When SAPinst asks for the 'Migration Export' choose
the path to ../DVD1/EXP1'
The next steps are the same as for the 'normal' installation and described
in the standard installation guide.
Edited by: Surapong Surabotsopon on Nov 4, 2008 4:55 AM
Edited by: Surapong Surabotsopon on Nov 4, 2008 4:56 AM
Edited by: Surapong Surabotsopon on Nov 4, 2008 5:00 AM

The transaction log for database 'ECC' is full + ECC6.0 Installation Failur

Guyz,
my ecc6 installation failed after 8 hours run with following error log snippet...
exec sp_bindefault 'numc3_default','SOMG.MSGNO'
DbSlExecute: rc = 99
(SQL error 9002)
error message returned by DbSl:
The transaction log for database 'ECC' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
(DB) ERROR: DDL statement failed
(ALTER TABLE [SOMG] ADD CONSTRAINT [SOMG~0] PRIMARY KEY CLUSTERED ( [MANDT], [OBJTP], [OBJYR], [OBJNO] ) )
DbSlExecute: rc = 99
(SQL error 4902)
error message returned by DbSl:
Cannot find the object "SOMG" because it does not exist or you do not have permissions.
ECCLOG1 data file has got 25GB initial size and growth was restricted to 10% (PROPOSED BY SAPInst)...
i'm assuming this error was due to lack of growth space for ECCLOG1 datafile...am i right? if so how much should i allocate memory for this log ? or is there any workaround ?
thanks in advance

Kasu,
If SQL is complaining that the log file is full then the phase of the install that creates the SQL data/log files has already occurred (happens early in the install) and the install is importing programs, config and data into the db.
Look at the windows application event log for "Transaction log full" events to confirm.
To continue, in SQL Query analyzer try:
"Backup log [dbname] with truncate_only"
This will remove only inactive parts of the log and is safe when you don't require point-in-time recovery (which you don't during an install).
Then, go to the SQL Enterprise manager, choose the db in question and choose the shrink database function, choose to shrink only the transaction log file and the space made empty by the truncate will be removed from the file.
Change the recovery mode in SQL Server to "simple" so that the log file does not grow for the remainder of the install.
Make sure you change the recovery mode back to "full" after the install is complete.
Your transaction log appears to have filled the disk partition you have assigned to it.
25GB is huge for a transaction log and you would normally not see them grow this large if you are doing regular scheduled tlog backups (say every 30-60 minutes) because the log will truncate every time, but its not unusual to see one get big during an install, upgrade or when applying hotpacks.
Tim

ECC 6.0 with EHP1 installation

Hi Guys,
Not able find the correct installation guide for ECC6.0 installation (SR3) on AIX/DB2 platform. Can anybody please provide some link for the same ?
Also my customer has a requirement for latest available EHP i.e. EHP4. I understand that first we have to install EHP1 and then upgrade the system to EHP4. Is there any other alternative ?
Please provide some inputs if you worked on ECC6.0 installation with EHP1/4. I'm urgently looking for some help on this.
Thanks

Hi Mike,
If this is a fresh installation then you should go with the ERP 6.0 EHP4 READY SR1 Installation. The plus point will be in ehp4 ready, after the installation the netweaver software components are already on ehp1 and kernel is 7.01, while the ecc software components are still in the 600 level.then you can update it to EHP4 using EHPi.But remember it is MANDATORY that you should proceed with the EHP4 installation using SAPephi, else i think the system will be in a state where SAP will not support and its not advised to use system like that.
if you go with the normal installation you'll get version 700 and kernel on 700 and then you take it to EHP4.
I will go with option one.
Best Regards
Niraj

AIX6.1+HACMP+DB2 9.1+SAP ECC 6.0 High Availablity Installation

Dear All,
This is to request you that anyone having a sure shot Installation guide /Solution to Install SAP in High Availablity using following platform.
1. AIX 6.1
2. DB2 9.1
3. HACMP
4. ECC 6.0 SR 2
Note: Not Failover by scripting. High Availablity like Microsoft MCSC. Complete installation on Virtual host, IP and Shared File system/stirage.
Please....................................................
Regards
Dharmendra

Installing SAP NW07 SR3 with DB2 on AIX HACMP
Scenario:-
DB will run on Node A
SAP CI will run on Node B
If node A fails DB will failover to Node B
If node B fails CI will failover to Node A
Shared SAP and DB filesystem are in SAN
Filesystems will failover accordingly
Requirements:-
SAP NW07 SR3 DVDs
AIX Node A
AIX Node B
HACMP supports node failures. We are not using HACMP to probe Application (SAP/DB) failures. i.e. if SAP or DB process crashes HACMP will not failover the resource groups.
/etc/hosts should have IPs of both nodes
Assumptions:-
PRD = PRD
Node A hostname: dbserver
Node B hostname: ciserver
Shared filesystems
These filesystems can be moved/ failed over (unmounted /mounted) from one node to another.
/usr/sap/PRD
/sapmnt/PRD
/db2/PRD
/db2/db2prd
/db2/PRD/sapdata1
/db2/PRD/sapdata2
/db2/PRD/sapdata3
/db2/PRD/sapdata4
/db2/PRD/log_dir
/db2/PRD/db2dump
Users and Groups will be created by SAPINST.
Please make a note of the UIDs as we have to use the same UIDs and GIDs on other node as well.
User Home directory:- For prdadm please use a home directory on shared disk
For e.g. /usr/sap/PRD/home/prdadm
Use Distributed Installation option in SAPINST
Installation steps:-
Node A:
Mount SAP filesystems
Mount DB2 filesystems
Check /etc/hosts that IP of both nodes are available
Ping both nodes and check the IP address
Check output of command ifconfig u2013a and confirm that both IPs are available
Start SAPINST with SAPINST_USE_HOSTNAME option.
For e.f. ./sapinst SAPINST_USE_HOSTNAME=dbserver
Step 1: Global host preparation (this should be easy to finish)
Step 2: Database instance installation
During this step note down UIDs and GIDs created by sapinst.
During this step please choose /usr/sap/PRD/home/prdadm as user home for prdadm user.
With SR3 DVDs db2 software will be installed in /db2/PRD/db2_software
Step 3: Install SAP Central Instance with SAPINST_USE_HOSTNAME=ciserver
Stop / Start SAP -> Login and confirm SAP instance is running fine.
Shutdown SAP and DB2
Add entries in .rhosts in home directory on user prdadm and db2prd
For example in /usr/sap/PRD/home/prdadm/.rhots
<IP Address of Node A> prdadm
<IP Address of Node B> prdadm
<all possible IP address> prdadm
Similarly for /db2/db2prd/.rhosts
<IP Address of Node A> db2prd
<IP Address of Node B> db2prd
<all possible IP address> db2prd
Node B:
Move SAP resources from Node A to B (i.e. SAP filesystems should become available on Node B)
DO NOT MODE DB RESOURCES, Let it stay on Node A alone.
Create /db2/PRD and /db2/db2prd directories (this should have some free space, 10 GB is good to go)
Start SAP installation under Distributed installation option
Step 1: Global host preparation
Temporarily change /etc/hosts and make the IP of dbserver same as ciserver.
dbserver line should be written above ciserver line
i.e. u2018ping dbserveru2019 and u2018ping ciserveru2019 should return same IP address on Node B (NOT NODE A)
Step 2: Database instance installation with option SAPINST_USE_HOSTNAME=dbserver
During this installation, make sure UIDs and GIDs are given same as in Node A.
You can confirm the UIDs from /etc/passwd and GID from /etc/group
Also, make sure you specify user home for prdadm as /usr/sap/PRD/home/prdadm
Once installation starts ABAP Load and one or two jobs are completed, please cancel the installation.
as db2prd
db2stop force
db2start
db2 connect to PRD
It should be successful. This confirms the DB2 is setup properly.
db2stop terminate
db2stop force
rm u2013r /db2/db2prd/*
rm u2013r /db2/PRD/sapdata1
rm u2013r /db2/PRD/sapdata2
rm u2013r /db2/PRD/sapdata3
rm u2013r /db2/PRD/sapdata4
rm u2013r /db2/PRD/log_dir
rm u2013r /db2/PRD/db2dump
Retain these directories so that you can mount the shared filesystems from Node A to Node B during failover.
Change and correct IP address in /etc/hosts of host dbserver, which we changed temporarily earlier.
Failover DB resources to Node B
Check if all DB2 filesystems are correctly available.
On Node A, check and double confirm that there are no files/directories under /db2 and its subdirectories. i.e. all filesystems have come to Node B.
In our case there was one filesystem /db2/PRD/db2prd which did not come to node B and we had to struggle a lot to find the same.
CONTINUED BELOW !!!

File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2

Hello,
We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
If anyone able to help me with required Solaris file system. it will be great help.
Please let me know if there is any query.
Thanks.

> All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
> But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
> Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
So you'd need to read the installation guides
Markus

ECC 6.0 with SQL installation in MSCS Envirnoment.

Hi Gurus,
I am installing ECC 6.0 (only ABAP Instance) with MSSQL 2005 in Windows 2003 MSCS Envirnoment.
I have certain question regarding this scenario.
What I have understood by SAP Document is as below.
We have Node A, Node B and SAN.
After MSCS installation and Cluster configuration.
Cluster will contain 3 Groups ( Clustergrp, Sapdbgrp, Sapgrp)
As per my understanding I will do as below.
On Node A:
1. Install MSSQL Client on Virtual name.
2. Install ASCS
3. Install CI.
4. install Database Instance
Question 1. What is to be placed on SAN and what should be placed on local Drives of the Nodes ?
Question 2. Whether MSSQL Client should be installed in both the nodes( NODE A and B), as in standalone installation SQL client is installed in C:\Program Files\Microsoft SQL Server ?
Question 3. Do any other component (like Enqueue replication Server) is must to enable the Node to be able switchover to 2nd Node ?
On Node B:
1. Install Dialog Instance.
All of the above component installation will be done on Virtual name.
Please clear my above doubts and advice if I left out some things.
Thanks in advance.
Regards
Vinay

Hi Darwin,
Thanks for your replies,
I have completed my installation without any error.
I did it as below:
On Node A
1 MSSQL Client on Virtual Name
2 ASCS on SAN
3 SCS on SAN
4 First MSCS Node ( it create a SAP Cluster Group)
5 Database Instance (in SAN on disk that belong to SAPDBGroup)
On Node B
1 Additional MSCS Node
after this bring the SAP Cluster Group online
Now back to NODE A
Installation of Enqueue(2 times) 1 for ASCS and 1 for SCS
Than on Node B
Installation of Enqueue(2 times) 1 for ASCS and 1 for SCS
Now Node A
Make SAP group Online
Install Central Instance
Node B
Install Dialog Instance.
After that you need to restart both the node one at a time so that your server are accessible on Virtual IP.
Now when one node goes off (Like Node A) the user got log off for 3-5 sec and they need to login again, is it normal. Is there any post step to stop this or some cluster configuration need to be done.
Regards
Vinay

SAP ECC 6.0 and EHP5 Installation with DIMP functionatilty

Hi Frineds,
We are installaing ECC6.0 and EHP5 fresh installation and looking for DIMP functionality too active in the system.
If we do only installation only Central Application Usage type then we can directly install EHP5 system (Central Application consist of SAP_APPL & EA-APPL).
But My question can we get the DIMP also after this installation type or we need to first install ECC6.0 and then upgrade EHP to get the DIMP function..I have not seen this answer any where in the guide or in SDN...
Thanks.

Hi Manas,
ECC-DIMP is a add-on to ECC so you can install this add-on or perform a delta upgrade.
Relevant installation and support packages are available on SAP Service Marketplace.
Check Note 874473 - Release strategy for ECC-DIMP as of ECC 6.0
Many Thanks.
Ravindra Mirashi

ECC 6.0 Best Practices installation

Dear Experts,
I have some questions to ask you regarding the project I am working on.
Our team is involved in the implementation of an SAP ERP (ECC) solution for our customer. In order to speed up all the process the team has decided to use the SAP Best Practices technology.
The project was very successful and our customer has asked us to deploy the solution to other subsidiaries.
The system has been configured as follow for the french country:
1. SAP ERP 6.0
2. SAP Best Practices for french with the required package level in order to install the bp
3. Enhancement Package 2
Questions:
1. How can we implement the same bp scenario on the other subsidiaries if the system is not at the same support package as the previous project?
2. The new bp for Germany and USA are now available only with support package 3?
Thanks in advanced for your help.
Alberto

Dear ALL,
Please note below the answer from SAP.
Regards,
Alberto
Regarding your questions:
1. The official answer from SAP is that we can only guarantee a successful installation for a specific SAP Best Practices package for the specific support package level as mentioned in the quick guide. The recommended path in the customer project is to install the SAP ERP release with the required support package level, install and activate the SAP Best Practices scenarios and then apply any higher support package or Enhancement package.
2. Yes, the new SAP Best Practices baseline packages V1.603 for US, Germany and also now for France are based on SAP ERP EhP3. The reason for this is that in the EhP3 the functionality for running the SAP NetWeaver Business Client including the preconfigured roles and power lists are now part of the standard SAP ERP and delivered within the EhP3

DCNM Post-installation config: SSL set-up


I am a novice at this software. I have two servers on different networks. The software is installed and is answering its URL from the network but recently, I was required to change the hostnames and obtain new SSL certs. The DCNM software is holding onto the older certs even though the new ones are installed to IIS. I am looking for a solution to reconfiguring the SSL to use the new certs for HTTPS. I got into the the Java Keytool thing and got REALLY turned around. DCNM uses Tomcat or IIS? Anyway, the old certs are still being used by the software. That has to change. 
 
Thanx in advance 
 
Jeffrey D. Fisher
Windows Server Engineer
US Strategic Command/J646
Offutt AFB, NE USA


Folks,
Hello. Thanks a lot for replying. I reboot OS and run the commands as below:
[ora11g@rac2 bin]$ ./srvctl config database -d racdb
Its output:
PRCD-1027 : Failed to retrieve database racdb
PRCR-1070 : Failed to check if resource ora.racdb.db is registered
Cannot communicate with crsd
[ora11g@rac2 bin]$ ./sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Fri Mar 9 15:28:59 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: SYS
Enter password: SYS
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSTEM
Enter password: SYSTEM
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSMAN
Enter password: SYSMAN
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
[ora11g@rac2 bin]$
As we see the outputs above for the 2 commands "srvctl" and "sqlplus", my questions are:
First, why cannot retrieve database racdb ?
Second, sqlplus is poped up. Why users SYS, SYSTEM, SYSMAN cannot log in ?
Third, does my RAC database installation have problems ?
Thanks.

SAP IDES ECC 6.0 EHP7 Oracle Installation error (DODS.SQL is missing)

Hello community,
I am having a problem with the installation of the current IDES ERP 6.0 EHP7 Oracle for Linux x86_64 installation images.
I am using the Software Provisioning Manager 1.0 SP04_9-20009701 and selected installation option "SAP Business Suite 7i 2013 Support Release 1" > "EHP7 for SAP ERP 6.0 ABAP Support Release 1" > "Oracle" > "SAP Systems" > "Application Server ABAP" > "Standard System" .
I am installaing on SUSE Linux Enterprise Server 11 SP3 x86_64.
The installation stops at the "Import ABAP" stage:
Program "Migration Monitor" exits with error code 103. For details see log files(s) import_monitor.java.log, import_monitor.log).
import_monitor.log
TRACE: 2014-07-04 04:16:14 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDODS' finished import package:
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load -ctf I /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/
51048312_1_EHP7_FOR_SAP_ERP_6.0_Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DATA/SAPDODS.STR
/tmp/sapinst_instdir/BS2013SR1/ERP607SR1/ORA/INSTALL/BS2013SR1/ERP607SR1/ORA/STD/ABAP/DDLORA_LRG.TPL SAPD
OD
S.TSK ORA -l SAPDODS.log
TRACE: 2014-07-04 04:16:14 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' starting import package into database:
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error -
loadprocedure fast
TRACE: 2014-07-04 04:16:14 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDDIM' starting import package into database:
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -stop_on_error -
loadprocedure fast
INFO: 2014-07-04 04:16:15 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 2, waiting 4, completed 157, failed 1, total 164 error processing of package SAPDOD
S
ERROR: 2014-07-04 04:16:15 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is interrupted with R3load error.
Process '/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_o
n_error -loadprocedure fast' exited with return code 2.
For mode details see 'SAPDODS.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
SAPDODS.log
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7
_FOR_SAP_ERP_6.0_Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/SQLFiles.LST
(SQL) INFO: found /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7_FOR_SAP_ERP_6.0_
Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/SQLFiles.LST
(SQL) INFO: Trying to open /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7_FOR_SAP
_ERP_6.0_Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/SQLFiles.LST
(SQL) INFO: /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7_FOR_SAP_ERP_6.0_Instal
lation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/SQLFiles.LST opened
(SQL) INFO: Searching for SQL file DODS.SQL
(SQL) INFO: DODS.SQL not found
(SQL) INFO: Searching for SQL file /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7
_FOR_SAP_ERP_6.0_Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/ORA/DODS.SQL
(SQL) INFO: /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7_FOR_SAP_ERP_6.0_Instal
lation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/ORA/DODS.SQL not found
(SQL) ERROR: SQL list was not built successfully
(DDL) ERROR: check_sql_list() failed for /BI0/APERS_BOD00
(DB) INFO: disconnected from DB
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140704041615
I have searched for the file DODS.SQL on the IDES import media. It is missing.
Could that be the cause of the error?

Hi Daniel.
It looks to be problem with export DVDs. Can you download the same again and re-extract it.
Regards,
Deepak Kori

ECC 6.0 SR3 IDES installation problem

Hi,
We are installing ECC 6.0 SR3 IDES on Solaris 5.10 and Oracle 10g.
The disk space available for sapdata is 270 GB and the RAM of the server is 8 GB.
22 GB of SWAP we have maintained.
The server has 2 physical processors and each processor has 4 cores.
The server is UltraSPARC-T2+.
We are installing only ABAP stack which has 112 jobs for Import ABAP phase.
Initially we had maintained 5 parallel jobs for Import ABAP/R3load.
But then it was giving error for some of the pachkages like e.g.
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(DB) INFO: REPOSRC created #20090115221342
DbSl Trace: Error 18 in stmt_execute() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-18 occurred when executing SQL stmt (parse error offset=0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOSRC"
(SQL error 18)
error message returned by DbSl:
ORA-00018: maximum number of sessions exceeded
(DB) INFO: disconnected from DB
Hence first we reduced the no. of parallel jobs to 3, then 2 and then to 1.
With 3 and 2 also it was giving same error; but with 1 job it is proceeding but obviously very slow.
The import phase has 112 jobs to finish and this issue has been pending for more than 5 days now!
Suggest a solution ASAP.
Thanks & Regards,
Tejas

Hi Chandra,
Thanks for the reply.
I have already increased the value of session parameter from 96(default) to 180 and process from 80 to 150.
No. of sessions = 1.2 X No. of processes
Please suggest.
Thanks & Reagrds,
Tejas

Acrobat 9 installation/config procedure repeats every time

I have just transfered Acrobat 9 to a new laptop running Windows 7 Professional from previous laptop running XP. Every time I click on the program from the Start Menu it goes through a full install and config procedure before opening. How can I prevent this happening?

Well there is an issue with Acrobat 9 on Windows 7. Not sure if it is the s ame issue you have.
Support policy | Acrobat 9 | Windows x64

Installation/Config Problem with Sun Directory Server Control Center (6.0)

Hi All,
I have recently attempted an installation of Sun Directory Server EE 6.0 on a x86 Solaris 10 machine.
I have selected to install Core Directory Server and Sun Directory Server Control Center with my installation.
After installation, if I check the status of the SUNDSCC, I receive the following message:
bash-3.00# ./dsccsetup status
DSCC Application is not installed
DSCC Agent is registered in Cacao
DSCC Registry has been created
Path of DSCC registry is /var/opt/SUNWdsee/dscc6/dcc/ads
Port of DSCC registry is 3998
I have also tried to re-start the Sun Java Web Console using the /usr/sbin/smcwebserver start command but that does not do anything.
If i try to initialize the SUNDSCC usin the ./dsccsetup initialize command, the registry got created, but it still displays as "application not installed".
I do not understand. I have already installed this application using the JES installer.
please help!
Regards,
Saahil Goel

I had a similar issue. Here is how I fixed it.
Run dsccsetup status with the -v option. it will show you where it is trying to find the DSCC Application. Then do a find on your system to see where it is actually installed. Then simply copy it over to where dsccsetup is looking for it. Then do dsccsetup initialize. Below is what it looked like on my system when I did it:
# ./dsccsetup status -v
## /usr/sbin/smreg is present
## /usr/sbin/smcwebserver is present
## /opt/server/sun/dscc6/dccapp is MISSING
DSCC Application is not installed
## /opt/sun/cacao/bin/cacaoadm is present
## /opt/server/sun/dscc6/lib/jar/nquickmodule.jar is present
## Running /opt/sun/cacao/bin/cacaoadm list-modules -r
DSCC Agent is registered in Cacao
## Running /opt/sun/cacao/bin/cacaoadm status
## Running /opt/sun/cacao/bin/cacaoadm list-modules
## Running /opt/sun/cacao/bin/cacaoadm get-param network-bind-address
## Running /opt/sun/cacao/bin/cacaoadm get-param jmxmp-connector-port
## /opt/server/sun/ds6/bin/dsadm is present
DSCC Registry has been created
Path of DSCC registry is /var/opt/sun/dscc6/dcc/ads
Port of DSCC registry is 3998
# find / -name dccapp
/opt/server/dscc6/dccapp
# cp -R /opt/server/dscc6 /opt/server/sun
# ./dsccsetup dismantle
DSCC Application is not registered in Sun Java(TM) Web Console
Unregistering DSCC Agent from Cacao...
Deleting DSCC Registry...
All server registrations will be definitively erased.
Existing server instances will not be modified.
Do you really want to delete the DSCC Registry ? [y/n]y
Server stopped
DSCC Registry has been deleted successfully
# ./dsccsetup initialize
Registering DSCC Application in Sun Java(TM) Web Console
This operation is going to stop Sun Java(TM) Web Console.
Do you want to continue ? [y,n] y
Stopping Sun Java(TM) Web Console...
Registration is on-going. Please wait...
DSCC is registered in Sun Java(TM) Web Console
Restarting Sun Java(TM) Web Console
Please wait : this may take several seconds...
Sun Java(TM) Web Console restarted successfully
Registering DSCC Agent in Cacao...
Checking Cacao status...
Deploying DSCC agent in Cacao...
DSCC agent has been successfully registered in Cacao.
Choose password for Directory Service Manager:
Confirm password for Directory Service Manager:
Creating DSCC registry...
DSCC Registry has been created successfully
Hope this helps.

IDES ECC 6.0 Service re: installation

Hi Expert on IDES server,
I was trying to re: install my IDES server bcos the initial one crashed on the hard disk. fortunately, it was install from a VMware (external drive).
After going through the installation video, I tried to re-instal, it asked for licence key I had n't any. Could some help me out

To install IDES, you will be asked Solution Manager key first.
You can generate this key via for Solution Manager system, from tcode SMSY.
After installation complete, SAP will install temporary license which is valid for one month only.
You'd then want to install the permanent license key via tcode SLICENSE in your IDES system.
But first it should be requested at http://service.sap.com/licensekey.
Regards,

ECC 6.0, BI & EP Installation & Config?

Similar Messages

Maybe you are looking for