ECC 6.0 Enhancement Pack 5 upgrade phase ADJUSTCHK faillure

When I run the Enhancement Pack Installation, I get a hard failure at the MAIN_SHDCRE/ADJUSTCHK phase. The error message says "No lines found in logfile matching "UMODPRO\.INX". The log follows...
1 ETQ201 Entering upgrade-phase "ADJUSTCHK" ("20111006131443")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_SHDCRE/ADJUSTCHK'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'SAP_MOD_EHP'
2 ETQ399 Arg[1] = 'ADJUSTCK.ELG'
2 ETQ399 Arg[2] = 'ADJUSTMT.INF'
4 ETQ010 Date & Time: 20111006131443
4 ETQ265 Starting report "RSUMOD01" with variant "SAP_MOD_EHP" in batch
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RSUMOD01" with job count "13144400" scheduled
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20111006131819
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ248 Missing log file(s) of report "RSUMOD01", matching "UMODPROT\.INX"
What does this mean?
Is the backslash supposed to be in the name UMODPROT.INX?

Hi,
Please check in SM37 if there is any job failure in the system. And also check if there is any dump.
Thanks
Sunny

Similar Messages

Query on Enhancement Pack Upgrade/ Installation-Business Functions install

I am working on an Enhancement Pack Upgrade. I have the following questions from the Client, can you please help answer u2013
Scenario u2013 Upgrade from ECC 6.0 to ECC 6.0 EhP4
1 Using Business Function Prediction service, assume SAP recommends 10 Business functions to be installed. We install the 10 business functions and after 6 months the client realizes that there are some more functions which will help business.
a.What does it take to install the additional business functions.
b.Do we have to do the entire EhP4 Upgrade again
c.If we have to do the entire EhP4 Upgrade again what happens to the initially installed business functions, will that be overwritten
d.What will be the additional SPDD and SPAU effort to activate the additional business functions, will that be same as the initial SPDD/ SPAU effort.
2 Can we install all the Business functions available in EhP4. What happens if we install all the business functions. What will be the additional effort or overhead in terms of hardware, database, ABAP effortu2026..?
Thanks in advance.

Hi,
1. For installing additional business functions you need to again run the whole EHPI process. But what I feel is even you install more than 1 business function you will be able to activate only 1 business function per system.
2. The initially installed business functions would not go anywhere. You need to select them in your solman before the stack.xml file generation.
3. SPAU/SPDD effforts depends on your system. So no comments.
4. If you plan to install all business functions then you will need good amount of DB space and your upgrade downtime would be high.
Regards,
Nirmal.K

SRM 7. 0 with ECC 6.0 Enhancement Pack

1) My client just upgraded their R/3 to ECC 6.0, but no Enhancement Pack.
2) They are trying to upgrade from SRM 5.0 to SRM 7.0 in the near futures.
3) During their first SRM phase, their scenario is limited to the following:
a. R/3 RFQs are pushed to SRM via RFC call (custom program)
b. SRM vendor logs in to see the RFQs and creates Quote
c. SRM buyer evaluates the quotes
4) Question: In order to run the above mentioned scenario without issues, is Enhancement Pack 4 a mandatory component for them, or can ECC 6.0 without any EnH support it already? If it's mandatory, which sub-components of the EnH 4 must be activated in order to support the scenario?
5) Question: In their next SRM phase, they are trying to run scenarios like PPS and Doc Builder. In that case, is Enhancement Pack 4 a mandatory component?
6) Last: Is there any SAP official documentation that maybe answers the question that I listed above?
Thanks.

Hello Jay,
Please find the upgrade information:
https://websmp206.sap-ag.de/upgrade-srm
EhP4 is not mandatory for strategic sourcing, data transfer via RFC can be used.
The benefit with EhP4 for your scenario will be new feature of "Collective Processing of purchase requistion" CPPR; where buyer can select the PReq line items on the portal & create RFx directly in the SRM system. All data transfer is via PI in this scenario. Creating a RFQ in ECC is not a good idea, when you can leverage the RFx capabilities of SRM.
New features: Blog:
/people/michael.jud/blog/2008/09/10/srm-70-in-the-business-suite
Official information :
http://service.sap.com/srm click on SRM 7.0 external view
Hope this solves.
Thanks
Ashutosh

Ecc 6.0 enhancement pack 5 - incompletion procedure VL10

We loaded ecc60 a few years ago. We just loaded enhancement pack 5 onto sandbox. I am having issues with delivery processing. While creating a delivery either from VL10H or VL01N I have to step through the incompletion log step by step to have the delivery save in the system. If I do not look at every incompletion, the save does give me a doc number but when I go back into it it is not there. None of these incompletion steps currently show up in delivery processing if they are not filled in. (picking time,, loading time, volume, etc). They are not warnings in our PRD system currently. Has anyone seen this and anyone have suggestions on how to resolve with this enhancement pack? I see no notes here or on OSS for this.
Thanks for any help.
Susan

Hi,
We just did a EHP 5 upgrade and after that we found lot of issues in the DN creation area! one was, when you create a DN revesal via VL09 transaction, the document flow is not updated. As well as you get a error in the VL09.
If the credit mamangement is active, your schedule lines are getting doubled in the DN picking screen. Therefore I would suggest you to check for OSS notes.
Best regards,
Rahal

Enhancement Pack Upgrade and Portal Implications

Hello Everyone,
We are currently on EHP 4 and running EP/Portal 7.00 SP30 and are planning to upgrade to EHP 6. Is there a need to upgrade EP when upgrading the SAP landscape to EHP 6?
We are treating the EHP 6 upgrade as a technical upgrade. Thus the existing ESS/MSS functionality that we have will remain as Java Web Dynpros. We are also not planning on implementing HR Renewal with the upgrade.
Thank you for the help.
Best Regards,
Scott

Hi Scott,
You wont be having any issues if the SP Level of you EP/Portal 7.00 is 30.
Please check the note 1496212.
According to the note if your SP level is less than 18 then you have to upgrade it to 30.
Your ESS/MSS business Packages will remain the same and for HR Renewal you can deploy its latest Businesspackage.
We had a similar situation and now, we have successfully implemented latest ESS (in WebDynpro ABAP) and MSS (MSS ADDON) in our old portal 7.00 SP 27 (Backend Upgraded to ECC6 EHP 6)
Regards,
Suman

GTS 8.0 with ECC Enhancment Pack 4 SP2

Hello-
We've recently upgraded our ECC system to Enhancement Pack 4, SP2. We'd like to install GTS 8.0, however I'm unable to find the requirements for GTS 8.0 in enhancement pack terms. I'm only able to find that it requires SPS16, which I'm not able to find any comparisions relating SPS16 to Ehp4 SP2 to see how they stack up.
Basically, can anybody find or refer me to material for GTS requirements in terms after Enhancement Pack 4? Or a note that compares SPS to EhP versions?
Thanks in advance!!
Jeff

Hi Jeff,
SAP note 1266777 provides the information on installation of GTS on ECC with Enhancement Pack.
Best regards,
Howard

ECC 6.0 Service Pack 4 Upgrade Impact on CRM 5.0

Hello,
With regards to an upgrade of ECC 6.0 SP4 (Enhancement Pack 1 to Enhancement Pack 4), I wish to know which areas of the CRM module would be impacted (also considering that the version is CRM 5.0).
Any known experienced issues of ENH 4 impact on CRM 5.0 ?
Thank you very much,
Eyal

Eyal,
Unless you make major changes in SD(in ERP) during the ECC EHP4 upgrade, then I don't see major problems. You probably want to make sure that regression testing is perfomed, but that is probably part of your plan anyway.
I would guess that beyond regression testing you won't have much to do, during the ECC EHP4 upgrade. Keep in mind though if your CRM system calls any non-standard function modules in ERP you always have a risk of those breaking.
Take care,
Stephen

Performance Issue with RF Scanners after SAP Enhancement Pack 5 Upgrade

We are on component version SAP ECC 6.0, and recently upgraded to Enhancement Pack 5. I believe we are on Net Weaver 7.10, and using RF scanners in one plant that is Warehouse Managed. Evidentially when we moved to EHP5, the Web SAP Console went away and we are left with ITS Mobile. This has created several issues and continues to be a performance barrier for the forklift drivers in the warehouse. We see there is a high use of java script, and the processors canu2019t handle this. When we login to tcode LM00, on a laptop or desktop computer, there are no performance issues. When we login to tcode LM00, with the RF scanners, the system is very slow. It might take 30 seconds to confirm one item on a WM Transfer Order.
1.) Can we revert back to Web SAP Console, after we have upgraded to EHP5?
2.) What is creating the performance issues with the RF Scanners now that we switched over to SAP ITS mobile?
Our RF Scanners are made by Intermec, but I donu2019t think that is where the solution lies. One person in our IT Operations has spent a good deal of time configuring SAPITS to get it to work, but still it isnu2019t performing.

Tom,
I am sorry I did not see this earlier.
I'm currently working on a very similar project with ITS mobile and the problem is to accurately determine the root cause of the problem in the least amount of time. The tool that works is found here: http://www.connectrf.com/index.php/mcm/managed-diagnostics/
Isolating the network from the application and the device is a time consuming process unless you have a piece of software that can trace the HTTP transaction between host and device on both wired and wireless side of the network. Once that is achieved (as with Connect's tool) you can then you can begin to solve the problem.
What I found in my project is that the amount of data traffic generated by ITS mobile can be reduced drastically, which speeds the response time of the mobile devices, especially with large number of devices in distribution centers.
Let me know if I can answer more questions related to this topic.
Cheers,
Shari

Error in ecc upgrade phase

Hi,
while upgrading ECC 4.7 to ECC 6.0, I am not able to start shadow instance. Following error is giving .
Aditionally I can able to open the shadow instance from GUI lavel. But unable to login through DDIC password. The ddic password has been locked. Can anyone advice me how to unlock the ddic password in the upgrade phase.
Starting shadow system ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
      SAPup error message
SAPup> ERROR: Starting system failed, rc=0
              To analyse the errors during start of shadow instance,
              view files 'STARTSFI.LOG' and 'DEVTRACE.LOG'
              in directory '/dsttemp/put/log'
              Repeat phase until shadow instance is started
              and you can log on instance number '21'.
            - "continue"
            - "cancel"
Enter one of these options [continue] :=
===============================================
===============================================
ERROR in PHASE STARTSAP_IMP
================================
=================================
SAPup> CHECKS AFTER UPGRADE PHASE STARTSAP_IMP WERE NEGATIVE !!!
       It is recommended that you repeat phase STARTSAP_IMP
       You can exit and restart the phase after the errors
       have been corrected. Alternatively, if you know that
       the error is not of concern, you may ignore it
       and continue with phase REPACHK2
              You are urged to repeat phase STARTSAP_IMP !
            - "repeat"
            - "init"
            - "exit"
            - "ignore"
Enter one of these options [repeat] := init
14:50:31 UPGRADE/EUIM: END OF PHASE   STARTSAP_IMP
14:50:31 UPGRADE/EUIM: START OF PHASE STARTSAP_IMP
Starting system ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
waiting 20 seconds for system to come up ...
testing if system is available ...
      SAPup error message
SAPup> SYSTEM START failed, code -2
                    -2: the test rfc did not work.
                    Try to log on to the system with user DDIC.
            - "continue"
            - "cancel"
Enter one of these options or "help" [continue] :=
Enter one of these options or "help" [continue] :=
      SAPup message
SAPup> CHECKS AFTER UPGRADE PHASE STARTSAP_IMP WERE NEGATIVE !!!
       It is recommended that you repeat phase STARTSAP_IMP
       You can exit and restart the phase after the errors
       have been corrected. Alternatively, if you know that
       the error is not of concern, you may ignore it
       and continue with phase REPACHK2
              You are urged to repeat phase STARTSAP_IMP !
            - "repeat"
            - "init"
            - "exit"
            - "ignore"
Enter one of these options [repeat] :=
Appreciate for an immediate response ...
Thanks in advance

while upgrading ECC 4.7 to ECC 6.0, I am not able to start shadow instance. Following error is giving .
Aditionally I can able to open the shadow instance from GUI lavel. But unable to login through DDIC password. The ddic password has been locked. Can anyone advice me how to unlock the ddic password in the upgrade phase.
This doesn´t make sense. If you can´t start the shadow instance then you can´t logon to the system
Try the following:
cd <put-directory>/bin
./SAPup stopshd
set the parameter
login/no_automatic_user_sapstar = 0
in the instance profile of the shadown instance
then start the shadow instance
cd <put-directory>/bin
./SAPup startshd
Unlock the shadow instance using
./SAPup unlockshd
Try to logon with user SAP* and unlock DDIC.
Markus

4.0B to ECC 6.0; SPDD in PREPARE or UPGRADE phase?

Hi Gurus,
I am working on an upgrade from R/3 4.0 to ECC 6.0. I worked on pgrades before but am alien 4.0B. BTW, from a Developer perspective:
1) SPDD adjustments are done in which phase? PREPARE or UPGRADE?
2) Are here special cases where the adjustments need to be done before running the UPGRADE phase?
Helpful Answers will be rewarded

Hi Karthik
>
> 1) SPDD adjustments are done in which phase? PREPARE or UPGRADE?
>
SPDD is done in Upgrade ->Phase ACT_700
> 2) Are here special cases where the adjustments need to be done before running the UPGRADE phase?
>
At ACT_700 phase stop the upgrade and take a backup of the DB and the PUT<DIR> before starting the SPDD activity.
Make sure there are no pending tp request. Either release them or delete them.
All phase need to be completed successfully in PREPARE, before starting UPGRADE
Cheers
Shaji
Edited by: Shaji Jacob on May 5, 2008 9:23 PM

How to Check Enhancement Pack of ECC system

Hi Experts,
I want to check enhancement pack of My SAP R/3 ECC 6.0 system.
Where can i find this information can you please help.
In System --> Status --> in component version i can see "SAP ECC 6.0".
On click of the button provided below this component version , i can see following details:
SAP_ABA             700                     0011     SAPKA70011     Cross-Application Component
SAP_BASIS     700                     0011     SAPKB70011     SAP Basis Component
ST-PI             2005_1_700     0005     SAPKITLQI5     SAP Solution Tools Plug-In
PI_BASIS             2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
SAP_BW             700                     0011     SAPKW70011     SAP NetWeaver BI 7.0
SAP_AP             700                     0007     SAPKNA7007     SAP Application Platform
LCAPPS     2005_700                     0003     SAPKIBHD03     LC Applications (LCAPPS) 2005_700
SAP_APPL     600                     0006     SAPKH60006     Logistics and Accounting
from this information can you please help me identify my SAp R/3 ECC 6.0 system's enhancement pack version?
Regards,
Ashish Shah

SAP_APPL 600 No EHP
SAP_APPL 601 EHP1
SAP_APPL 602 EHP2
SAP_APPL 603 EHP3
SAP_APPL 604 EHP4
SAP_APPL 605 EHP5
SAP_APPL 616 EHP6
SAP_APPL 617 EHP7
Sorry if i am wrong....thats how i find it...i am an ABAPer.
Regards,
Vishnu

ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative

Hi Basis Expert,
while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
Hope anybody can share a bit your experience on this issue. we try search the note and find the forum but no luck.
Thanks

Hi,
> 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
> 2EETG011 "No shadow system""DB-connect not against shadow tables !"
>
It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
Thanks
Sunny
Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM

Enhancement Pack 2 impact on ESS for ECC 6.0

We are planning to upgrade one of our systems (evaluation system) from EA-HR 600 to EA-HR 602 (Enhancement Pack 2 SP2)
There's some ongoing ESS configurations (just ESS) on this evaluation system.
What is the impact of an Enhancement Pack 2 import/upgrade towards the existing ESS configurations ?
Has anyone experienced extensive 'overwriting of existing ESS configuration' or does the EnhP 2 introduces new functionalities leaving the existing configurations untouched ?
Do ESS functional folks have to redo the bulk of their config ?
Many thanks for any replies.

Thanks Chris
Still confused.
Are you able to tell me what is the latest enhancement pack for ESS, the reason for asking is that I'm looking for more details on the new iViews as contained in Note 1048386 see below
Thanks
WB
In the previous ESS Business Package (BP) version, the links for starting processes were provided in the workset Life and Work Events. With EhP2, the links for starting the processes are provided in the workset that the process belongs to thematically (for example, the process 'Change of Working Time' is provided in the workset 'Working Time'). The following list provides an overview over the processes available in the standard system and the worksets they are assigned to.
Benefits and Payment
o Company Loans
o Membership Fees Sports Club
o Status Overview
Working Time
o Change of Working Time
o Status Overview
Own Data
o Change of Address
o Personnel File
o Status Overview
Life and Work Events
o Maternity Leave
o Birth of a Child
o Termination
o Status Overview
The available processes are integrated in the navigation of the ESS Homepage Framework.

Enhancement Pack 2 for ESS for ECC 6.0

Can anyone provide me with document on the new functionality of Enhancement Pack 2 impact on ESS for ECC 6.0?
Or where I can find this documentation?
What areas of ESS & MSS does it cover?
Thanks
WB

Thanks Chris
Still confused.
Are you able to tell me what is the latest enhancement pack for ESS, the reason for asking is that I'm looking for more details on the new iViews as contained in Note 1048386 see below
Thanks
WB
In the previous ESS Business Package (BP) version, the links for starting processes were provided in the workset Life and Work Events. With EhP2, the links for starting the processes are provided in the workset that the process belongs to thematically (for example, the process 'Change of Working Time' is provided in the workset 'Working Time'). The following list provides an overview over the processes available in the standard system and the worksets they are assigned to.
Benefits and Payment
o Company Loans
o Membership Fees Sports Club
o Status Overview
Working Time
o Change of Working Time
o Status Overview
Own Data
o Change of Address
o Personnel File
o Status Overview
Life and Work Events
o Maternity Leave
o Birth of a Child
o Termination
o Status Overview
The available processes are integrated in the navigation of the ESS Homepage Framework.

Security Guide for Enhancement Pack 4 for ECC 6.0

Hello,
I am trying to analyse the impact of applying Enhancement pack 4 for ECC 6.0, Can someone help me find any security guides for it.
It is an existing system and few additional modules are being implemented.
Kind Regards.

Hello,
We have applied EHP4 on an exisiting(running) ECC 6.0 System. Can someone help me find answers to below queries
a) What is the SAP standard process to start with Security bit.
b) Do we need to run SU25 steps. If yes, which one of them.
c) Since the purpose of applying EHP4 was to activate few set of new business functionalities, we intend to affect the existing security design at the minimal. What is the best approach for this.
Kind Regards,
Abdul

ECC 6.0 Enhancement Pack 5 upgrade phase ADJUSTCHK faillure

Similar Messages

Maybe you are looking for