ECC 6.0 HCM / Crystall Reports

Hello :
I would like to know if we can use CR2008 with HCM in some scenarious instead of Standard SQ01/SQ02/SQ03 and infosets queries.
If am aware that we need ODBC if we connect with Access or any other source.
How do we connect ECC 6.0 with Crystall reports.
Can some one provide me steps to connect Crystall reports to use tables in ECC 6 eg: any Tables in T OCE SE16 with PA0001 etc.
Thanks

Hello,
Not sure what all those acronyms are but possibly if they are SAP data sources then you should post your question to the Integration Kit forum here:
BusinessObjects Integration Kits
If not then typically if you use ODBC CR can report off the data sources, otherwise please explain what those mean?
Thank you
Don

Similar Messages

How to map ECC Infoset Query to Crystal Report

Hi All,
I am using 25 standard SAP crystal reports which have been mapped on the top of ECC system. Some of reports are working well but some are not working due to unable to find query. The name of the report is Controlling Dashboard report and it has CO_OM_CA_20_Q1 query which I was unable to map on ECC using Crystal Report. I do not knw how to map ECC table infoset to Crystal report.
Can anybody assist me to get solution?

Hi Efstratios,
Hope you are well!
I am experiencing the same issue:
unable to get this infoset query CO_OM_CA_20_Q1 in Crystal Report which is made on the top of ECC
I followed the BI quick guide as well, I am on EPH 4 and I am able to see both the Query Infoset CO_OM_CA_20_Q1 and its related Infoset /SREP/CO_OM_CCA_20.
But unfortunately, it wouldn't let me update the connection approprietaly.
Is this something you can assist me with?
Thanks in advance
Yann

Error In ECC For Crystal Report Containing Sub-Report Link

Hi,
We are using Crystal Reports 2013. We extracted a Crystal Report from SAP ECC to modify it further utilizing the features of Crystal and export it back to SAP ECC.
The updated Crystal Report has a Sub-Report link within it, while exporting it back to SAP ECC, we get the attached error message as "layout.subreport should not contain any data connections".
However, on removing the Sub-Report link, the report can be successfully exported back to ECC and executes without any issues.
Is there any limitation on features to be used when exporting Crystal Reports to ECC?
Thanks & Regards,
Mitalee

Hi
I am facing the same issue when I try to open Crystal report Olap Grid via .net Crystal Report Viewer.
Getting the error message like not able to open OLAP Cube.
Please need urgent solution
Thanks a lot,
Usha

Crystal Report connecting Multple ECC systems

Hi,
I am working on crystal where I compare the data between to two diffrent databases(ECC tables). I am using SAP Table, function mudule option to create connection.
I have built a main report against ECC system A and imported a sub report built on ECC system B. Now I see that connection in my main report is overwrting the connection in the sub report. If I change the connection in the subreport with set data source location it changes the connection of both sub report and main report. After I deploy this report to infoview, in cmc I see only one database connection.
Is this a bug or can we have only one connection to ECC system per one crystal report even if it has sub reports?
Thanks

Yes that happens automatically, I just checked the same logic with universes built against oracle data source, I could see two coonections in the CMC. Its like its there is this issue when I am connecting to sap tables directly

How to create crystal reports from ecc abap program?

Hi all,
I am new to sap ecc to bo report!!
I heard that abap program cannot be directly connected to crystal reports,
So created a function module which is equivalent to the abap program!!
And happened to connect the same in crystal !!
Can anyone let me know how to proceed !!
will be there any performance issue ?
can anyone guide me how to do reporting from ecc function module to crystal reports directly?
Thanks

Hi Pooja,
From what I know, not all ABAP programs can be accessed in Crystal Reports. The program should return rows and columns, otherwise, CR would not be able to report off it.
I'm not sure if there are any performance issues if we follow your path. Do you experience any?
And, do you need help in creating a report on the function module, I mean do you also have any design related queries?
-Abhilash

No Crystal Report data returned in the InfoView - Critical Issue

Hey all,
We have been trying to solve this issue since 2 weeks after updating the licenses in our BOBJ dev/production environment.
There are a handful of Crystal Reports in the production environment based on a SAP ECC Infoset. The crystal reports have a combination of static and dynamic filters based on Business Views. All the reports return data in the client tool; however the same reports do not return data in the infoview. The users have administrator privileges.
We tried patching our BOBJ env to the latest fix packs, change database configuration, rebuilt reports and yet face the same issue. Any suggestions would be appreciated. Thank you for your time.

We figured out the issue. All the reports had a flag which was not interpreted by the Infoview. Removing the flag in the reports solved the problem.
This is an active known issue with Business Objects according to the SAP note :
1440703 - Boolean Parameter values in .NET InfoView are wrong
The latest fix packs has not resolved the issue yet.
Thank you
Vinny

Universe or Crystal Reports???

What is preferable when we are creating reports on ECC?
Building a Universe over ECC (or) Crystal Reports??
Please help.

You cannot access all data in your SAP ERP system if you build a universe on the underlying database. Some of the data are stored in a consolidated/encoded form in the database tables and the extraction is not always trivial/possible.
For the time being the only officially supported way to report on ECC is to use Crystal Reports and the native SAP drivers (Infoset, Table/function/cluster).
There is a prototype connector that allows you to get data from ECC into the data federator and build a universe on top of that.
SAP BusinessObjects Web Intelligence Reporting for SAP ERP [original link is broken]
Still keep in mind that this is a prototype and not a finalized product.
As far as I know HANA is one of the solutions SAP is working on that will enable you to report on ECC data directly from the SAP BO BI tools using the new version of the universe (as delivered in XI 4.x).
Regards,
Stratos

How to trigger crystal report from SAP ECC

Hi All,
I hope i m right forum to ask this question.
we want to do label printing from Crystal reports. data will be present in SAP ECC .
So I below issues
1 ) how to connect SAP ECC database with Crystal Reports.
2 ) how to trigger print output in Crystal reports from ECC , lets say I create a Delivery In ECC , the print output will be issued to Crystal report and I should get a print out Immediately ( for printing - printer will be connected to local system and SAP network printer ) .
I have worked with this type of scenario in smarforms , adobeforms. but not with Crystal Reports ...
Regards
Yashpal Gupta.

Hi Yashpal,
First thing you need to do is install the Connector on both your work station where you run Crystal Reports as well as the SAP Server where the data is.
So I moved your post to the SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
Search of browse here, lots of info on how to...
Thanks
Don

Open ECC report in Crystal Reports

Hi,
Question, hope you have some info on this...
I want to try & open a custom report which is built in an ECC system (report is currently run as a "Yxxx" transaction) in Crystal Reports. Purpose is to further edit and format the report using Crystal Reports functions.
Does anyone know what path to follow here? Do I have to set up a new connection for the given source system?
Thanks for any tips advice.
Ps. I have Crystal Reports 2008 and also the BI Integration Kit (not sure if this is used / required).
Thanks,
Willem

There are transports that the SAP Integration Kit delivered. you may have already installed this on your BW, but they would need to be installed on ECC if you want to query there. Once these are installed, Crystal should be able to see an SAP - Table, Cluster, Function Data Connection allowing you to connect to your ECC.
You should review the SAP Integration Kit doc - it spells out authorizations required, how to handle security, etc.

CRYSTAL REPORT FOR ENTERPRISE ON ECC

Hi Everyone,
I have been trying to connect Crystal Report for Enterprise over ECC via universe as we don't have option
to connect CR4E directly to ECC.
So, I have made a universe in IDT and published it in repository.
Now, when I am using that universe in WebI Report and DashBoard then it is working fine but the same is throwing
the error while I am trying to connect with CR4E 'Failed to execute query: 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale'.
The same error 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale' was also coming when we try to save the IDT with Secure Connections is set to Server Middleware(Window -> Preferences->Information Design Tool ->Secured Connections ->Server Middleware).
Regards,
Raghwendra

Hi,
As per the SAP Note 2022008 - Crystal Reports for Enterprise gives error with ERP Universe this is is the bug in
SAP Crystal Reports for Enterprise 4.1 Support Pack 3 Patch 1
SAP BusinessObjects Business Intelligence Platform 4.1 Support Pack 3 Patch 1
This issue has been reproduced at SAP and is found to be a bug (ADAPT01725424).
Solution
This issue has been fixed with BI 4.1 SP3 Patch3.
Regards,
Amit

Crystal Report Using ECC Data has Auth error in Infoview

We've created a Crystal report that successfully accesses ECC data from a function module in our Dev environment when the report is executed from within Crystal Designer. When we try to execute the same report against the same development ECC system from within InfoView we get the following error:
ERROR: The Database Logon Information for this report is either incomplete or incorrect.
The connection information is the same as it is in designer. We are able to successfully run Crystal Reports over BW data within InfoView. Any ideas about what might be wrong?
Doug

Ingo,
The consumers of the report do have ECC access for order and inventory management so licensing should not be an issue.
We were able to resolve the issue. The problem was with our version of SAP GUI on the BO Dev server.
We had to update our u201CServices.dllu201D and our u201CSAPLogonTree.xmlu201D file with an accurate version. Once that was done, the report executed as expected in InfoView using LDAP.
Thanks,
Doug
Edited by: Douglas Eberle on Jun 13, 2011 6:54 PM

How to protect ECC performance from Crystal Reports execution?

Hello,
We built Crystal Reports (CR) which reports from SAP FI InfoSets. These reports may take a long time to execute and potentially can impact all ECC users.
AFAIK CR are executed in dialog mode on ECC.
We know that from CR perspective we can only limit the number of records returned.
One of the options is to create a dedicated application server instance for CR. But it looks like a costly one.
Other options:
Move data to BW every 15 minutes and execute reports from there.
Schedule reports at night to minimize users impact.
We are using ECC 6 EP3, BW 3.5, BOE XI 3.1 (with SAP Integration Kit) and Crystal Reports 2008.
Can you please let me know if any of you have the same challenge.
Thank you,
Serge

Hi Ingo,
I'm using [BusinessObjects XI Integration for SAP Solutions Installation and Administration Guide|https://websmp209.sap-ag.de/~sapdownload/011000358700001646962008E/xi3-1_bip_sap_install_en.pdf] (from 2008-12-02). There are some references to batch publishing from BW. The same applies to your document [BusinessObjects Integration Kit for SAP - Installation and ConfigurationSDN Community Day - BusinessObjects Enterprise with SAP|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f].
When we schedule CR in BOE it still runs in dialog mode on ECC.
Could you please be more specific where we can define switch to make it run as background process on ECC.
Thank you,
Sergey
Edited by: Sergey Vlasov on Apr 16, 2009 11:56 AM

Integration crystal report with ecc

hi experts
i am not similar to crystal report,i wanna know if we can develop the crystal report in ECC directly,i find some forums all about bi,crystal report just can integrate with BI?
also i need some detail documents ,please help me,thanx all
best regards
zlf

Do not cross post.
Read the "Rules of Engagement"
Regards
Juan

Crystal Report on ECC data

Hi All,
My client has typical requirement where they want free form text from Portofolio Item to be printable or exportable documents.For which I think only option is to design Crystal Report on SAP PPM Portfolio Item Notes(Portfolio Item Details>Overview tab> Project Summary--> columns Project Purpose, Rationale etc). These are free form text and user can enter unlimited characters . Now my user want data from these fields in form of documents either they print or export to Word or PPT.
Please suggest me whether Crystal is right tool or any other document management tools we can use.
We are on BI 4.0; SAP BW 7.30 and ECC 6.0.
Appreciated your help and guarantee of points for helpful answers.
Regards,
Reddy

Hi Ingo,
Its nice to see you and thanks for response. I am sorry as I was traveling couldn't reply. My requirement is to display ECC data(I am using FM) in BO report and I read that there is concept called Business View Manager. So can you please suggest me whether to use BVM to improve Crystal Report performance or not required.
And also if report consists of more number of columns(200+), whats the best way to design Crystal Report? I mean if we have all fields in one row than it is hard to read especially if there are long descriptive fields. In that case Subreports, Hyperlinks etc or some other way to make it user friendly and readable format.
Please let me know if you need additional info and greatly appreciate your help. Only question is if we have more number of columns and rows whats the SAP best practice for designing/formatting Crystal Report.
Thanks and Regards
Reddy

Crystal Report against ECC 6.0 with SSO configured

I created a simple report against the ECC 6.0 Article table and saved it to InfoView. I can run the report fine, but when others run it they get an error stating the logon parameters are incomplete. We are in the process of configuring single sign on and have created other Crystal Reports going against ECC 6.0 with Business Views where SSO turned on in the data connection. Everyone can refresh those reports with no problems. Is their some report setting that needs to be set for Crystal Reports using a data source directly against ECC 6.0 tables?

We have multiple reasons for implementing SNC.
The main reason we have enabled SNC is to simply the users experience while working in the SAP environment. We are going live this month with Plant Maintenance, SRM, Project System, General Ledge and Asset Management reporting cubes in our BW environment as well as in our ECC 6.0 environment. We have set up SAP Portal and have created iviews to BOBJ folders and reports. Users are authenticated once by logging on to the Lan. Once logged on we would like them to seemlessly run SAP transactions and Business Objects reports through the SAP Portal based on their job function. Each user has security setup in BOBJ and SAP to allow access to transactions and reports appropriate for their job function.
We have three types of SAP reports and data connectors.
- One set of Crystal reports go against ECC 6.0 through Business Views with a Data Connection set up for SSO.
- One set of WEBI reports goes against BW queries though Universe Connections set up for SSO.
- One set of Crystal reports go directly against ECC 6.0 tables.
We currently have two issues:
1) The Crystal reports going directly against ECC 6.0 tables are returning the error
Error - The database logon information for this report is either incomplete or incorrect.
2) When we send a link to any report using OpenDocument if the user is not logged on to InfoView they get a rather long error message:
Account Information not recognized: Active Directory Authentication failed to log you on. Please contact your system admin....
Our hardware and server setup is a load balancer connected to a cluster of two Tomcat servers connected to two BOBJ servers.

ECC 6.0 HCM / Crystall Reports

Similar Messages

Maybe you are looking for