ECC 6.0 Installation on windows

Dear all,
My question is ....can we install ECC 6.0 on Oracle 9i Database. we are useing windows as OS. does ECC 6.0 supports Oracle 9i database.....please help.
Thanks and Regards
Akumar

And to add: The support for Oracle 9.2 ended at the end of last month:
SAP on Oracle
Markus

Similar Messages

Error during ECC 6.0 installation on Windows Server OS

Hello Experts,
I am having trouble installaint ECC 6.0 on windows server 2008 with MS SQL. I was half way through the installation and encountered an error. Hence i am trying a fresh installation however I get an error message " Cannot determine parameter SAPGLOBALHOST from default profile " . I have deleted registry entries for the previous installations, yet I am unable to proceed. Please help . Have cheked the forum bue haven found any inputs other than http://forums.sdn.sap.com/thread.jspa?threadID=1040931. This has not been of much help.

Hi Venkata,
Default profile.........
SAPDBHOST = BR0137
dbms/type = mss
dbs/mss/server = BR0137
dbs/mss/dbname = ERP
dbs/mss/schema = erp
j2ee/dbtype = mss
j2ee/dbhost = BR0137
j2ee/dbname = ERP
SAPSYSTEMNAME = ERP
SAPGLOBALHOST = BR0137
rdisp/bufrefmode = sendoff,exeauto
SAP Message Server for ABAP
rdisp/mshost = br0137
rdisp/msserv = sapmsERP
rdisp/msserv_internal = 3903
SAP Central Service Instance for J2EE
j2ee/scs/host = br0137
j2ee/scs/system = 02
j2ee/ms/port = 3902
SAP Message Server for ABAP
SAP Central Service Instance for J2EE
SAP Message Server for ABAP
SAP Central Service Instance for J2EE
SAP Message Server for ABAP
SAP Central Service Instance for J2EE
login/system_client = 001

SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E

Dear Sir.,
Am installing sap ECC 6.0 on windows 2008 clustering with db2.
I got one error in the phase of Configure the database for mscs. The error is DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND .
DB2_INSTANCE=DB2PRD
DB2_LOGON_USERNAME=iil\db2prd
DB2_LOGON_PASSWORD=XXXX
CLUSTER_NAME=mscs
GROUP_NAME=DB2 PRD Group
DB2_NODE=0
IP_NAME = DB2 IP PRD
IP_ADDRESS=192.168.16.27
IP_SUBNET=255.255.0.0
IP_NETWORK=public
NETNAME_NAME=DB2 NetName PRD
NETNAME_VALUE=dbgrp
NETNAME_DEPENDENCY=DB2 IP PRD
DISK_NAME=Disk M::
TARGET_DRVMAP_DISK=Disk M
Best regards.,
please help me since am already running late with this installation to run the db2mscs utility to Create resource.
Best regards.,
Manjunath G
Edited by: Manjug77 on Oct 29, 2009 2:45 PM

Hello Manjunath.
This looks like a configuration problem.
Please check if IP_NETWORK is set to the name of your network adapter and
if your IP_ADDRESS and IP_SUBNET are set to the correct values.
Note:
- IP_ADDRESS is a new IP address that is not used by any machine in the network.
- IP_NETWORK is optional
If you still get the same error debug your db2mscs.exe-call:
See the answer from Adam Wilson:
Can you run the following and check the output:
db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
I suspect you may see the following error in the debug.txt:
Create_IP_Resource fnc_errcode 5045
If you see the fnc_errcode 5045
In that case, error 5045 which is a windows error, means
ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
couldn't find the "public network" as indicated by IP_NETWORK.
Windows couldn't find the MSCS network called "public network". The
IP_NETWORK parameter must be set to an MSCS Network., so running the
Cluster Admin GUI and expanding the Cluster Configuration->Network to
view all MSCS networks that were available and if "public network" was
one of them.
However, the parameter IP_NETWORK is optional and you could be commented
out. In that case the first MSCS network detected by the system was used.
Best regards,
Hinnerk Gildhoff

ECC 6.0 installation o WIndows 2003 Ent R2 on SQL 2005

Hello Folks,
As mentioned in subject line, I am in middle of the installation. I have got error in phase "Run ABAP Reports".
The error is mentioned in the file dev_slic file which I have pasted below. It is not able to drop an index to create a temporary lisense.
"Cannot drop the index 'MLICHECK.MLICHECK0', because it does not exist or you do not have permission."
Till the time I have already opened ticket with SAP.
Here is the dev_slic file -
>
trc file: "dev_slic", trc level: 2, release: "700"
SlicIGetDate: <20080413>
SlicPwForR3Setup: calc password out of <RPD20080413FJAWFNLTL>
SlicIGetDate: <20080413>
SlicSapInstall: sysname: >RPD< connect: >1< rollback: >1<
SlicIDbLock: first call to SlicIDbLock: initialize Mutex
db_con_init called
create_con (con_name=R/3)
Loading DB library 'dbmssslib.dll' ...
load shared library (dbmssslib.dll), hdl 0
    using "D:\usr\sap\RPD\SYS\exe\uc\NTI386\dbmssslib.dll"
Library 'dbmssslib.dll' loaded
function DbSlExpFuns loaded from library dbmssslib.dll
Version of 'dbmssslib.dll' is "700.08", patchlevel (0.72)
function dsql_db_init loaded from library dbmssslib.dll
function dbdd_exp_funs loaded from library dbmssslib.dll
New connection 0 created
0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
db_con_connect (con_name=R/3)
find_con_by_name found the following connection for reuse:
0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
Thread ID:1884
Thank You for using the SLOLEDB-interface
Using dynamic link library 'D:\usr\sap\RPD\SYS\exe\uc\NTI386\dbmssslib.dll'
dbmssslib.dll patch info
patchlevel   0
patchno      72
patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
np:(local) connection used on RPDSERV
CopyLocalParameters: dbuser is 'rpd'
Using Provider SQLNCLI
OpenOledbConnection: MARS property was set successfully.
Provider Release:9.00.3042.00
Using Provider SQLNCLI
OpenOledbConnection: MARS property was set successfully.
Cache sizes: header 68 bytes, 100 names (157600 bytes), 100 dynamic statements (568800 bytes), total 726468 bytes
Initializing private procedure name cache.
procedure cache created/attached
Connected to db server : [RPDSERV] server_used : [np:(local)], dbname: RPD, dbuser: rpd
pn_id:RPDSERV_RPDRPD_RPD
Using MARS (on sql 9.0)
Connection 0 opened (DBSL handle 0)
ExecuteAndFlush return code: 0x80040e37 Stmt: [DROP INDEX MLICHECK.MLICHECK0 ]
ExecuteAndFlush: line 6324. hr: 0x80040e37 Cannot drop the index 'MLICHECK.MLICHECK0', because it does not exist or you do not have permission.
sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 3701, sev 11), Cannot drop the index 'MLICHECK.MLICHECK0', because it does not exist or you do not have permission.
Procname: [ExecuteAndFlush - no proc]
DbSlExecute - Error 103 (dbcode 3701) on DDLExecute
DbSlExecute - <DROP INDEX MLICHECK.MLICHECK0 >
License index MLICHECK0 not found( - ok)
ExecuteAndFlush return code: 0x80040e37 Stmt: [DROP INDEX MLICHECK.MLICHECK__0 ]
ExecuteAndFlush: line 6324. hr: 0x80040e37 Cannot drop the index 'MLICHECK.MLICHECK__0', because it does not exist or you do not have permission.
sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 3701, sev 11), Cannot drop the index 'MLICHECK.MLICHECK__0', because it does not exist or you do not have permission.
Procname: [ExecuteAndFlush - no proc]
DbSlExecute - Error 103 (dbcode 3701) on DDLExecute
DbSlExecute - <DROP INDEX MLICHECK.MLICHECK__0 >
License index MLICHECK__0 not found( - ok)
ExecuteAndFlush return code: 0x80040e14 Stmt: [DROP INDEX "MLICHECK~I1" ]
ExecuteAndFlush: line 6324. hr: 0x80040e14 Must specify the table name and index name for the DROP INDEX statement.
sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 159, sev 0), Must specify the table name and index name for the DROP INDEX statement.
Procname: [ExecuteAndFlush - no proc]
DbSlExecute - Error 99 (dbcode 159) on DDLExecute
DbSlExecute - <DROP INDEX "MLICHECK~I1" >
ERROR => DBSL statement where error happend:
   DROP INDEX ... [slicdb.c     2433]
ERROR       Can not drop license index MLICHECK~I1
TIME        Sun Apr 13 22:31:15 2008
RELEASE     700
COMPONENT   SLIC
VERSION     300
RC          99
MODULE      slicdb.c
LINE        504
DETAIL      DbSlExecute failed with return code 99
             Must specify the table name and index name for the DROP INDEX
             statement.
COUNTER     1
Old license index not dropped...(rc: -111)
Database vendor is MICROSOFT SQL
License table created
License table created (rc: 0)
Index for license table created
License index created (rc: 0)
License table created (rc: 0)
Go and create a temporary license
SlicIGetDate: <20080511>
SlicCalcLicenseKey: key db/prod = >TEMPLICENSERPDINITIAL   R3_MSS              20080511<
SlicIGetDate: <20080413>
License created as follows:
LICENSE DATA:
   systemname:      >RPD<
   hardware-key:     >TEMPLICENSE<
   productid:       >R3_MSS              <
   installation-nr: >INITIAL   <
   system-id:       >INITIAL_SY<
   userlimit:       >0<
   creation_date:   >20080413<
   expiration_date: >20080511<
   lcheck_date:     >19800101<
   lkey:            >8JU8CFNH4IKQLC7CJ2UUETJD<
   fprint:          >VTV96XNXYK97XYIA35ZFGISK<
Write license into database
The IRow interface is supported by this OLEDB provider
License >RPD< >TEMPLICENSE< >R3_MSS              < requested from db
License >RPD< >TEMPLICENSE< >R3_MSS              < not found in db
license does not exists, do a license insert
Try to insert inserted >RPD< >TEMPLICENSE< >R3_MSS              <
License inserted >RPD< >TEMPLICENSE< >R3_MSS              <
License written: >RPD< >TEMPLICENSE< >R3_MSS              <
Temporary License written into database
SlicSapInstall sap-msgserver license ok.
db_con_commit (con_da={R/3,0,0},th_commit=0,tx=1,hold_cursor=0)
DbSlDisconnect curr_thread_id: 1884 sl_conn[0]->thread_id: 1884
Disconnected from connection con_da={R/3,0,0}
Regards,
SAT

Dear,
If your problem not get resolved please check SAP Note 44958 - IDES installation 3.0C, saplicense
As per SAP Note its advised you can drop database index and continue with your installation.
Regards,
Nikunj Thaker.

ECC 6 Remote installation from window to UNIX SUSE

Hello all,
Is it possible to install the app on a wintel platform, and the DB and on a UNIX OS? and is possible to do it remotly from the wintel server?
Thanks
Osama

let me see if i got that...
You want to know if you can install SAP in windows with the DB under Unix?... the answer is yes.
You can have DB and CI in different servers, you need to install the database instance first under you unix box and then install the central instance under windows...
regards
Juan
please reward with points if helpful

Dispatcher down in ecc 6.0 installation

Hi,
   I am doing ecc 6.0 installation on windows with oracle 10g database. Installation is stoped on start instance phase.
In mmc dispatcher is down, messagenger and igs is up.
R3trans -d is 0. oracle is up.
sapinst_dev log:
TRACE      [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
Starting OS1/DVEBMGS00 [ABAP: UNKNOWN]. Elapsed time: 6:00 minutes...
TRACE      [iaxxcnclhd.cpp:83]
           doHandleDoc()
ACTION_CANCEL requested
TRACE      [iaxxcnclhd.cpp:719]
           doHandleDoc()
<html><head></head><body> You are about to cancel the <b>SAP ERP 2005 Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation</b> installation.<li>Choose one of the following:</li><ul> <li>Continue - to continue the installation.</li> <li>Stop - to stop the installation and exit SAPinst. You can continue the installation later from this point.</li></ul>Notes:<ul> <li> If you stop the installation after the installation activities had started, do not use the <b>SAP ERP 2005 Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation</b>, as it is not ready to be used.</li></ul></body></html>
TRACE      [iaxxcnclhd.cpp:157]
           doHandleDoc()
ACTION_STOP requested
INFO       2008-09-13 18:04:31 [synxcpath.cpp:776]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\__instana_tmp.xml.
WARNING    2008-09-13 18:04:53 [iaxxcnclhd.cpp:36]
           doHandleDoc()
SAPinst terminated by SIGINT (Ctrl+C)
dev_rfc log:
>TS> Sat Sep 13 18:32:28 2008
T:2796 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.sid, GWHOST=hostname, GWSERV=3300
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '192.168.9.10:3300' not reached
TIME        Sat Sep 13 18:32:28 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     2
i entered the values in hosts and in services sapgw values are there.
Pls help out.
Rgs,
Venkat

Hello. Try to check dev_w0 and dev_server0 (if you use JAVA to). The JRE version are? Regards.

ECC 6.0 Installation says you have not installed Oracle but i have done it!

Dear Friends,
I am a newbie in SAP. I am trying to install ECC 6.0 on a windows 2008 64bit, already i have installed Oracle 10.2 (not using SAP Media-because i didnt find Oracle installation files in the SAP Media we have purchased). after seting the directory of components SAPinst says "you have not installed Oracle, install Oracle and then continue the installation".
Thanks for your help.

Hi,
>> So as I understand, i can find Oracle installation files in 51036975 ZIP file, yeah?
Yes,it is correct. Please read the statement, in the note 1486772 - SAP Systems on Windows Server 2008 R2
To install the Oracle 10.2.0.4 database software,
use the RDBMS DVD #51036975 (ORACLE 10.2.0.4 Failsafe Server 3.4.1.5,
this DVD includes the database and the Failsafe component).
Copy the sapserver.zip file attached to this note.
Unpack sapserver.cmd and replace sapserver.cmd in the following directory:
<work directory>:\NT\AMD64
Best regards,
Orkun Gedik

SAP BW 3.5 w/ ECC 5.0 Installation Instructions

Hi BW Experts!
I would like to install the trial version of SAP BW 3.5 and IDES (ECC 5.0) on my Windows 2003 Server. I would really appreciate if anyone can send me the installation instructions to my email id: [email protected] . I will assign maximum points to the email that best helps me make a smooth installation, so please don't forget to include any additional tips/tricks/workarounds I may need to know to avoid common bottlenecks/issues during installation.
Appreciate your help in advance.
PS: I am still a SAP student so I do not have access to the SAP Service Marketplace, so please don't ask me to look in there for the instructions as I don't have access to it.
Thanks
Kumar P.

Are there any issues/drawbacks with this combination?
What are the exceptions to this?
Thanks in advance,
-Reji Thomas.

SAP BW 3.5 with ECC 5.0 Installation Instructions Needed

All BW Experts,
I would like to install the trial version of SAP BW 3.5 and IDES (ECC 5.0) on my Windows 2003 Server. I would really appreciate if anyone can send me the installation instructions to my email id: [email protected] . I will assign maximum points to the email that best helps me make a smooth installation, so please don't forget to include any additional tips/tricks/workarounds I may need to know to avoid common bottlenecks/issues during installation. Appreciate your help in advance.
PS: I am still a SAP student so I do not have access to the SAP Service Marketplace, so please don't ask me to look in there for the instructions.
Thanks
Kumar P.
Added note at bottom in response to the first suggestion.
Message was edited by: Kumar P

Hi Kumar,
You Can dowload The Instalation Documents from
https://websmp107.sap-ag.de/nw04installation
Thanks,
-Vijay

IDES Installation on Windows 7? Is it possible?

Hi folks,
Is it possible to install IDES ERP 6.0 EHP5 on Windows 7. I was searching on the net and found ides on windows 7. So, was curious to know if its possible.
Thanks
Ravi Jalani

Hi Ravi,
ECC IDES installation on Windows 7 is possible.
Refer Note 1379040 - IDES ERP 6.0 ECC 6.0 incl. EHP4.
Process is similar for EHP5 as well.
Regards,
Deepak Kori

MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA the computer is bloked od it is restart.This problem I solved when I put another processor INTEL 541(3,2GHz/800/1MB) whit this processor everthing is ok,but with INTEL 940 it can not be install WINDOWS VISTA .
I’m asking you for a new superstructure on bios update .

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

10g installation on Windows

I have a Windows server that is currently running 3 instances from the ora92 home. I installed 10g into a new home TEST102, everything worked fine except for the Net config assistant choked, below is the log tail:
INFO: Starting to execute configuration assistants
INFO: Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=E:\oracle\ora102SE\bin -classpath ";E:\oracle\ora102SE\jdk\jre\lib\rt.jar;E:\oracle\ora102SE\jlib\ldapjclnt10.jar;E:\oracle\ora102SE\jlib\ewt3.jar;E:\oracle\ora102SE\jlib\ewtcompat-3_3_15.jar;E:\oracle\ora102SE\network\jlib\NetCA.jar;E:\oracle\ora102SE\network\jlib\netcam.jar;E:\oracle\ora102SE\jlib\netcfg.jar;E:\oracle\ora102SE\jlib\help4.jar;E:\oracle\ora102SE\jlib\jewt4.jar;E:\oracle\ora102SE\jlib\oracle_ice.jar;E:\oracle\ora102SE\jlib\share.jar;E:\oracle\ora102SE\jlib\swingall-1_1_1.jar;E:\oracle\ora102SE\jdk\jre\lib\i18n.jar;E:\oracle\ora102SE\jlib\srvmhas.jar;E:\oracle\ora102SE\jlib\srvm.jar;E:\oracle\ora102SE\oui\jlib\OraInstaller.jar;E:\oracle\ora102SE\lib\xmlparserv2.jar;E:\oracle\ora102SE\network\tools" oracle.net.ca.NetCA /orahome E:\oracle\ora102SE /orahnam OraHome102SE /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\oracle\ora102SE\network\install\netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = E:\oracle\ora102SE
Parameter "orahnam" = OraHome102SE
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\oracle\ora102SE\network\install\netca_typ.rsp
Done parsing command line arguments.
Environmental error detected: The current Oracle Home and the Oracle Home passed from the installer are not the same. Oracle Net Configuration Assistant cannot continue.
It is recommended that you continue installation without completing Oracle Net configuration. Once the installation is complete run the Oracle Net Configuration Assistant separately after checking that the ORACLE_HOME environment variable is not set (preferred on Windows platforms) or that it is set to the correct Oracle Home.
Oracle Net Services configuration failed. The exit code is 1
Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe has failed
Execution Error :
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=E:\oracle\ora102SE\bin -classpath ";E:\oracle\ora102SE\jdk\jre\lib\rt.jar;E:\oracle\ora102SE\jlib\ldapjclnt10.jar;E:\oracle\ora102SE\jlib\ewt3.jar;E:\oracle\ora102SE\jlib\ewtcompat-3_3_15.jar;E:\oracle\ora102SE\network\jlib\NetCA.jar;E:\oracle\ora102SE\network\jlib\netcam.jar;E:\oracle\ora102SE\jlib\netcfg.jar;E:\oracle\ora102SE\jlib\help4.jar;E:\oracle\ora102SE\jlib\jewt4.jar;E:\oracle\ora102SE\jlib\oracle_ice.jar;E:\oracle\ora102SE\jlib\share.jar;E:\oracle\ora102SE\jlib\swingall-1_1_1.jar;E:\oracle\ora102SE\jdk\jre\lib\i18n.jar;E:\oracle\ora102SE\jlib\srvmhas.jar;E:\oracle\ora102SE\jlib\srvm.jar;E:\oracle\ora102SE\oui\jlib\OraInstaller.jar;E:\oracle\ora102SE\lib\xmlparserv2.jar;E:\oracle\ora102SE\network\tools" oracle.net.ca.NetCA /orahome E:\oracle\ora102SE /orahnam OraHome102SE /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\oracle\ora102SE\network\install\netca_typ.rsp
Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe has failed
Execution Error :
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
INFO:
*** End of Installation Page***
The installation of Oracle Database 10g was successful, but some optional configuration assistants failed, were cancelled or skipped.
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: hashcode for cfSession for exit tool exec: 4403749
INFO: executing the single exit-only tool
Now I am trying to run the Net config assistant outside of the installer and configure a 10g listener for the 10g instance using a port different from the 1521 that teh 9i listener is using and it keeps telling me that:
The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as is but it will not be possible to start the listener until the conflict is resolved...
I have tried several different ports (the only thing that could be in conflict, I think) and I keep getting the same message..
HELP!!
Has anyone out there set up a 9i and 10g installation on Windows using two different listeners, one for the 9i and another for 10g?

Yes, I have read this other thread you have cited but there is no conclusion - other than maybe by rerunning the install he overcame the issue and never completed the thread. In my case, the initial 10g install failed to run the net config assistant and there never was a 10g listener service created. Also, now I try to run the net config assistant stand alone and it refuses to create a listener service...claims that there is a conflict, even if I try on other than the default port.
I'm thinking the conflict lies with the fact there is an up and running 9i listener service and yes that listener is active because it is servicing a live production instance.
Our goal was to install a 10g instance with it's own separate listener, import our schemas and test our app on a 10g database then one day turn the 10g into the production instance.
Our plan was to avoid endangering the production environment by even trying to service the 9i database with the 10g listener. You cannot use a 9i listener for a 10g database but from what I read in the other thread you have cited, to try to fire up the 10g listener to service the 9i production instance would have resulted in a loss of servicve to the production environment if I experience the same phenomena as the fellow in the other thread.
Thank you for your time and consideration here...
I believe I should propose to have a separate server box set up to host this new 10g database. Our overall objective is to keep the production system up and running no matter what.
In the old days I remember that if too many attempts were made at installing on a Windows platform the registry would get hosed up beyond repair and the only out was to re-image the box and start over with a fresh copy of teh Windows operating system:-)
Let me know if you have any further suggestions...
Regards-
Jim

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

SAP WAS J2EE server installation on Windows Vista

Hi Experts,
Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
Is there SAP J2EE server also available with Vista compatibility ?
Regards,
Yomesh

> Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
>
> Is there SAP J2EE server also available with Vista compatibility ?
The problem with J2EE is the support status of the used JDK. Sun does not support 1.4.2 under Vista/Windows 2008, technically it works.
Markus

ECC 6.0 Installation on windows

Similar Messages

Maybe you are looking for