ECC 6.0 - Non-Unicode and BI 7.0 - Unicode any known problems?

We are determing whether or not to do a unicode conversion during our upgrade from BW 3.5 to BI 7.0. Our R/3 system is non-unicode and my company does not utilize languages other than English and is not expected to at any time in the near future. This being said we are trying to determine whether or not we should go ahead and do the conversion prior to being forced to by SAP at some point in the future. I was just hoping I could get some insight into whether there were known issues with running the two versions in conjuction with each other.
Thanks in advance,
John

We have a customer running this scenario, it should be possible to do so. Just keep in mind to do extensive testing as there might be some notes which are not yet in standard ...
Regards, Kai

Similar Messages

Java Add-in for AS ABAP ERP ECC 6.0 non-unicode

Hi all,
I have a AS ABAP ECC 6.0 NON-UNICODE system and i need to install Java add-in to the system without doing unicode conversion. The problem is that when i go to SAPinst:
Start SAPinst [page 90].
2. On the Welcome screen, choose <SAP system> Additional Software Life-Cycle Tasks Java Add-In for
ABAP <database> <system variant>
I have to use UC-Kernel even though my system is Non-unicode.
Is it mandatory to convert to unicode to be able to install Java add-in. I am doing this installation so i can configure Adobe Interactive Forms in the system.
All help will be apprieciated!!

The J2EE instance will always be unicode. The installation process should create an addiitional subdirectory, 'uc', under the existing kernel path to store the unicode kernel. We have been through this process and OSS note 669902 describes additional settings that are needed for a non-Unicode ABAP instance being combined with Unicode J2EE add-on. You will need to maintain both kernel versions going forward.

Can't connect to my iCloud account - not from my Mac's, not from my Phone and not from my iPad. Any known problems right now/Eric

can't connect to my iCloud account - not from my Mac's, not from my Phone and not from my iPad. Worked earlier today, but not now. Any known problems right now/Eric

Seems to be a major problem, according to MacRumours. Just have to wait, I guess...

I have a mac book pro mid 2011 and it overheats is there any known issue with this model

overheating issues
I have a mac book pro mid 2011 and it overheats is there any known issue with this model

Are you gaming or watching videos when the unit heats up? As your core temperatures rise, it's normal for the fans to speed up - but if you're not running any CPU/GPU intensive apps, it's not normal for your MBP to heat up or for the fans to run high. Download the free iStat Pro widget and either record or take a screen shot of your temps and fans speeds. Oh, and your MBP should not heat up just because you're using the power adapter.
Clinton

CRM unicode and ECC 6.0 Non unicode.

Hi All,
We have upgraded our system from 4.6C to ECC 6.0
Our ECC 6.0 is non unicode system. We are currently implementing CRM 5.0.
I want to know if we implement unicode CRM system, will there be any inconsistency as our ECC 6.0 is non unicode.
Regards,
Imran

Hi Imran:
I had a problem with middleware when going through a similar scenario to yours. The middleware functions were returning garbage when calling from CRM to ERP systems. See note 651497 which addresses this problem.
I implemented the fix by adding the following line to the beginning of function module BAPI_CRM_SAVE:
call function 'Z_MW_RFC_PING'.
Create a function group containing function module Z_MW_RFC_PING (code below):
FUNCTION Z_MW_RFC_PING .
*"*"Local Interface:
data:
lv_rfcdest type rfcdest.
* Read middleware parameter table to determine R/3 backend system
* name.
select single parval1
    into (lv_rfcdest)
    from smofparsfa
    where parsfakey eq 'CRMCFSOLTP' and
          parname eq 'CRMCFSOLTP'.
* If we get an RFC destination returned, PING it.
if sy-subrc eq 0.
    call function 'RFC_PING'
      destination lv_rfcdest.
endif.
ENDFUNCTION.
Note 777994 addresses some configuration on CRM system. In transaction R3AC6 on CRM system, make the following entries:
Key SMOF, parameter CODEPAGE_CHECK_OFF, value 'X';
Key R3A_COMMON, parameter CRM_SEND_XML, value 'X';
Key R3A_COMMON, parameter DATA_FORMAT, value 'XML'.
You should also do the following configuration:
In table CRMPAROLTP on ERP system set parameter CRM_SEND_XML_FOR_DEFAULT_DESTINATION, user CRM, value 'X'.
In table CRMRFCPAR on ERP system set the "Use XML" flag to 'X' for the CRM consumer. This also avoids code-page issues.
The above took care of conflicts in code-pages for my systems.
Regards,
D.

Any known problems with FCE-HD and "Capture Now" or edits

I've been working with FCE for almost two years now. I've had the same problem ever since-- The SPINNING PINWHEEL OF DEATH when: playing back edited video from the timeline and the playhead passes over various edit points, usually cuts. Is it a CAPTURE problem, or camcorder RECORD problem, or something else? I use a SONY DCR-TRV38 with firewire; FCE-HD;
Any thoughts on why I get this problem so often, and what I can do to avoid it in the future? should I just switch to Avid or Premier??
Thanks for any help...
Shawn

Hi Shawn.
I don't think there is a "known problem".
I assume your HDs are not more than 75% full or fragmented?
If you have not already done them, try the old chestnuts of Trashing the Preferences and Re-installing FCE.
1. Make sure you trash all 3 of the Preference Files as detailed in this article:-
http://docs.info.apple.com/article.html?artnum=93690
2. If that does not work then re-install FCE but make sure you delete all the old FCE files first as shown in this link:-
http://docs.info.apple.com/article.html?artnum=301182
Good luck.
Ian.
PS. When you write in with a problem, remember to give all possible APPROPRIATE details eg.
Computer model and external Hard Drive.
Operating System.
FCE version.
Camera type.
Did the problem suddenly occur or has it NEVER worked?
Have you recently loaded new Software or Upgraded ANY programs, Operating Systems etc.
Have you moved or altered your source files?
Have you captured the clips from a DV camera or an A/D Converter etc.?
Is it Standard or High Definition Video?
What type of files are you using?
Also include details of exactly what you were doing before the problem occurred.
Is your film hours long and filled with numerous transitions and effects etc.?
THIS IS A GENERAL LIST. SOME OF THEM WILL NOT APPLY TO YOU.

My photosmart has lost SSID and deactivated wireless without any known reason.

My photosmart has lost SSID and deactivated wireless without any known reason. Diagnotics only hint is that IP addresses, SSID, etc are empty. However it can detect the 802.11 (ethernet address but no IP) home network where it belongs.
I am adviced to do a "wireless installation" but get no hint where to start?? Need USB connection to my Win7 computer?
This question was solved.
View Solution.

What printer? What router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Matrox Millenium P650 and MSI K8N Neo 2. Any known problems?

I got myself the incredibly cool Zalman TNN 500AF, with an Asus motherboard A8V Deluxe, AMD athlon 64 3500, 90 nm, 2 x 512 Samsung PC3200 and XP SP2, and alas the system cannot be worked with the P650 and the Asus motherboard; we have tried the latest BIOS for both graphic card and motherboard.
A friend of mine will buy the ASUS motherboard and I plan to buy an MSI K8N Neo 2 and wonder if you have experienced any problems with the particular Matrox card P650 and the MSI board. Do you know about any compatibility problems? I do not want to go through the rather compicated installing of yet another dysfunctional system.
Thank you in advance! If you like images, I share some here: www.vivotopia.org/worldcitizens (it is mainly people from all over the world)
All the best!
Stefan
Sweden

The problems with matrox is with G450/G550 .
No problems reported with p650 .
Actually a user here switched card from G550 til P650 .
https://forum-en.msi.com/index.php?topic=60807.msg494405#msg494405

Any known problems with "Xtreme Game Fatal1ty Professional Series" and Nforc

Hello,
i plan to replace my audigy2 with a
"Xtreme Game Fatalty Professional Series".
There are known problems with the card itself and with the Nforce2 chipset?
My board:
MSI K7N2 Delta-L (nForce 2 Ultra400 chipset)
thanks
zivilistMessage Edited by zivilist on 0-3-20060:55 PM

If you are up for the battle that MIGHT transpire with either one of these cards then your welcome to it. EAX will work on games that nati'vely support EAX and the openAL API. Games that are direct sound only will require the ALchemy program to make them work correctly. You can find a list of openAL nati've games on the openAL site...sorry don't have a link for you right now but google it. You might be able to find the list of Direct SOund games that ALchemy works on by going to the ALchemy site as well.
For the most part, stuff is working but I would highly advise you do more research before purchasing any sound cards from Creative. Just check the forums and look under the Vista posts as well as here to get a taste of the issues many are having.

Any known problems with 2.6.32.5 kernel, xorg 1.7.3.902 and nvidia 190

Hi everybody.
Last update I did was when xorg 1.7.x (where x is between 1 and 3, dont remember), and it broke my xorg, I had some glitches with graphics, and x randomly crashed.
Now xorg 1.7.3, kernel 2.6.32.5 and nvidia 190.53 is here for pretty long time and as arch suer I feel committed to update
So i read the forum here a bit, and havent found any particular issues that broke the system, but I want to be safe.
I got nvidia geforce 6600 agp if it does matter.
So is there any particular issues that can arise after updating?
Thanks a lot!

Similar problem here, after updating xorg and nvidia driver the system freezes with nvidia logo on display and caps lock and scroll lock leds blinking.
I got nvidia geforce 7300.
Any solution to this besides downgrading?

Any known problems using IE6 and Adobe Reader 7 with LC:RM?

On an properly configured LC:RM server only allowing certificate (X509) authentication,
Adobe Reader 7 always pops up some Username/Password dialog for authentication.
Reader 8 and 9 work fine with certificates.
Is this an known restriction, that
Reader-7 does not support X509 authentication?
Dilettanto

Steve,
thank you again for your helpful answer.
In addition we now found out, that Users having an authenticating Proxy
may even need to upgrade to Adobe Reader 9 to be able to use LC:RM.
Dilettanto

Hi I got an iPad 3 for around 5 months ago and I did not have any display problems... i bought it for reading books on iBooks and when I open PDF to read and when I full zoom in letters and words then it was so clear and no pixels were found but today

Ok now when I zoom in iBooks in PDF then my pixels get a little weird and the text is not cripy and sharper like it was months ago.. And i was reading same pdf which I used before and when I go to safari and full zoom a very little pixels are not clear. pls help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Trying to install Mountain Lion on macbook. It keeps telling me that I'm using my HD for time machine backups and won't install. Any known fixes for this?

I have tried everything I know (which is not a whole lot) to circumvent this issue, but I can't get the install process to understand my HD is not my time machine backup.

Hello:
Go to system preferences>time machine and move the slider to off.
Barry

Are there any known problems with Macs and the mp3 playback in Adobe Connect ?

One user using an Apple Mac has complained of not being able to hear the mp3 sound playback in a meeting.
Is this a problem with Apple Mac and mp3 compatibility or is it an individual soundcard issue ?

I use several Macs with Adobe Connect and I have even created MP3 files for playback in the room. Works fine on all my macs. It's basic Flash. Suggest they clear their browser cache, replace their host-add-in if using one. Run the audio wizard as well to make sure sound is working in Connect.
All of the Adobe Connect Government engineers use Macs all the time so we've never had an issue with MP3's.

Are there any known problems with firefox4 and yahoo? Ive had problems with yahoo ever since I upgraded. If there are any problems, are there any solutions?

When I check my yahoo mail, a lot of times emails will disappear, or I will click on one to read, and it will open one that is above it. Also there are times when I am on a page, and a yahoo search page will open saying page could not be found, and it wasnt even something I was doing.

You have Adware installed. Click the Firefox button, go to Add-ons | Plugins and disable '''My Web Search'''. See http://en.wikipedia.org/wiki/My_web_search
Also, update Firefox to the latest version which is 4.0.1 by clicking Help | About Firefox | Check For Updates button.
In addition, update Adobe Flash via http://get.adobe.com/flashplayer/
Here's the Adobe security advisory for Flash: http://www.adobe.com/support/security/bulletins/apsb11-12.html

ECC 6.0 - Non-Unicode and BI 7.0 - Unicode any known problems?

Similar Messages

Maybe you are looking for