ECC 6.0 or ERP 6.0???

Experts,
What's ERP 6.0?
Is it different from ECC 6.0? HowSay during an upgrade we perform SPDD & SPAU on ECC 6.0 and ERP 6.0 comes up, what are the next steps?
NW
Edited by: NW on Aug 11, 2008 4:15 PM

Hi
for those with the same question:
SAP ERP 6.0 (formerly known as mySAP ERP 2005) is the name/ release of the complete SAP ERP application. The predessor is mySAP ERP 2004.
The large SAP ERP application consist of > 30 (?) installable units. One of these installable units is SAP ECC (6.0). Others are SAP NW - EP Core, SAP FSCM - Server ABAP, SAP SEM, etc.
[=> SAP ECC is a part of SAP ERP 6.0, and not only an alternative name].
SAP ECC is as well a special case, because it is the successor component of the former SAP R/3 (46c, Enterprise...)
[=> SAP R/3 is part of the very much larger SAP ERP (6.0)]
regards,
Andreas R

Similar Messages

  • Upgrading ECC 5.0 to ERP 6.0 EHP5

    Hi -
    We are planning to upgrade our ECC5.0(our present ECC 5.0 is on support pack stack 19) to ERP 6.0 EHP5.We are going to give a try in our Sandbox system first.So I have the following questions
    1)Can we upgrade our ECC 5.0 directly to ERP 6.0 EHP5 or initially we need to upgrade to ERP 6.0 Stack 18 as available in SMP and then install EHP5?
    2)Heard that Kernel will also be upgraded along with ERP 6.0 upgrade and no need to update Kernel separately.Is that correct?
    or
    3)Do we need to upgrade Kernel NW 7.0 SR3 first then upgrade to ERP 6.0 and finally install EHP 5.
    Please let me know.
    Thanks & regards,
    Nagendra.
    Edited by: Nagendra Devineni on Jul 19, 2011 6:01 AM

    We are planning to upgrade our ECC5.0(our present ECC 5.0 is on support pack stack 19) to ERP 6.0 EHP5.We are going to give a try in our Sandbox system first.So I have the following questions
    1)Can we upgrade our ECC 5.0 directly to ERP 6.0 EHP5 or initially we need to upgrade to ERP 6.0 Stack 18 as available in SMP and then install EHP5?
    A) Yes, The current mass shipment release already contains EHP5.
    Link for Master Guide
    https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000731312&
    2)Heard that Kernel will also be upgraded along with ERP 6.0 upgrade and no need to update Kernel separately.Is that correct?
    or
    A) Kernel will be upgrade automatically during the System Upgrade. You may wish to update to n or n-1 level available at the marketplace after the upgrade.
    3)Do we need to upgrade Kernel NW 7.0 SR3 first then upgrade to ERP 6.0 and finally install EHP 5.
    A) Since direct upgrade is possible, please read the master guide. You should be able to figure out the minimum levels required.
    Br,
    Venky

  • Installation of ECC-DIMP 604 on ERP 6.0 already in EHP4

    Hello,
    I have a problem regarding the installation of ADD-ON ECC_DIMP 604. My sistem is ALREADY a ECC 6.0 with EHP4 installed. I used the techinical usage FINANCIALS during the queue calculation on SOLMAN.
    Now I want to implement this add-on with transaction SAINT . The transactrion asks for an XML file that I'm unable to generate thru SOLMAN MOPZ.
    It give me an error like
    OCS PACKAGE SAPK-603DHINSAPAPPL DOES NOT MATCH CURRENT SOFTWARE VECTOR
    ABAP QUEUE CHECK FAILED
    I'm really stuck. Please advise
    Kir

    Hi,
    To implement any add-on in EHP4 system, you need stack xml file. As per your logs it looks like that stack xml file is wrong. Please check stack xml file again.
    Also, while downloading stack xml file from MOPZ, please select technical usage related to ECC-DIMP only.
    Thanks
    Sunny

  • Information on SAP: ERP 2004 ECC Component

    Hi All,
    We are performing a Pilot Project for one of our client, by integrating and harnessing the functionalities of technologies like SAP: Netweaver Portal (GUI), SAP: Exchange Infrastructure (Middleware), Manufacturing Execution System (MES) along with SAP: ERP 2004 (Client's scope).
    Request all to suggest a good source (website) for collecting information on ECC component of SAP: ERP 2004.
    Thanking you all in anticipation.
    With regards,
    Deepak Pai

    Hi Deepak,
    Help.sap.com is the best. Anyways what is area of information you are looking at? is it installation and configuration of the product or is it like what the product would offer.
    You can close this thread as you have already posted the same query in the forum "Integration with mySAP ERP 2004"
    Information on SAP: ERP 2004 ECC Component
    Regards,
    Naresh
    [email protected]

  • ERP STATUS 109 - Erro de Validação

    Boa Noite ,
    Estamos Implementando NF-e no Cliente e estamos com problema no momento de inutilizar qualquer NFE que foi reprovada pelo validador interno do GRC (Bandeira Vermelha e Engrenagem na J1BNFE) , no ambiente de DEV esta funcionando OK , em QAS ocorre o problema. Estamos a alguns dias do Go-Live e esse é o unico erro critico que estamos encontrando no Projeto.
    O Fluxo de aprovação da inutilização esta ok , retorna para o GRC , mas nao atualiza a tabela J_1BNFE_ACTIVE no ECC, acusando o erro ERP 105 ou 109 no monitor do GRC
    Ja haviamos realizado a aplicação das notas abaixo , conforme indicaçao do  Henrique Pinto e Fernando Ros em outros Threads.
    1413636 - Status bandeira vermelha após Skip NFe. (Nãqo lembro da descrição correta)
    1376324 - NF-e: Skip for NF-e with validation error
    1298283 - NF-e: Skip for NF-e with validation error
    1376901 - Skip for validation error
    Alguem ja teve que brigar com esse problema ??? Poderiam nos ajudar ???
    Grande abraço a todos,
    Rafael Medice

    Bom dia Rafael,
    Ao que parece está faltando algumas coisas na sua implementação:
    105 - refere-se aos objetos NF-e estarem bloqueados no R/3 quando o GRC envia a resposta do processamento, então é provável que vocês não tenham implementado o decouple. Verifique na J_1BNFE_ACTIVE se estão com CALLRFC=vazio, se estiver não está implementado. Solução: Procure pelas notas e no fórum tem vasto material sobre isso.
    109 - quando o status que o GRC está enviando é incompatível com o status que o ERP aguarda. Isto pode até estar associado ao anterior, mas o mais comum é a falta de tratamento na impressão automática ou qq coisa que implementaram no método CALL_RSNAST00 da BAdI CL_NFE_PRINT. A SAP Note 1470484 evita o 109 numa retransmissão do mesmo status de Sefaz, porém você deve revisar seus códigos. Procure por exemplos de código aqui no fórum também.
    Observação: Verifique TODAS as notas XX-CSC-BR-NFE para o seu ambiente, TODAS são necessárias. Sendo que as mais recentes deve-se planejar pois envolvem também o layout 2.0.
    Atenciosamente, Fernando Da Ró

  • Difference Between SAP ECC. 6.0 and SAP SCM 5.0

    Hi Gurus,  pls answer the questions below
    1) What is the Difference between ECC and SCM
    2)Is it mandatory having ECC if i have SCM
    3)What are functionality availble in SCM when compares to ECC.
    4)SAP-IS Retail is a Part of ECC or SCM
    thanks
    Satish

    Dear Satish,
    1) ECC is the SAP ERP Central Component  and you can connect to this the SCM system  (Supply Chain Management).
    2) yes it mandatory to have at least one ECC if you have SCM
    3) There are several functionalities availble in SCM when compares to ECC. Please read http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
    and
    http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
    for application help and for available functionalities.
    4) Regarding IS Retail please read note 157755. Here you will find your answer how can you instantiate your R/3 system as a Retail system (SAP Retail).
    I hope this helps.
    Regards,
    Tibor

  • Delta in 4.7 to ECC 6.0

    Hi Guru,
    Can anyone please provide me with the list of delta functionalities between 4.7 and ECC 6.0 in MM/WM module.
    Thanks in advance.
    Regards
    Prashant

    I have no idea how often questions like this have been answered here but I try to help you though.
    Read the Release notes
    http://service.sap.com/releasenotes
    Read the deltas for ERP 2004/ECC 5.0 and ERP 6.0
    Use the solution browser:
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Markus

  • SAP 4.x and ECC 6.x Release

    HI All,
    I was using SAP 4.7 release till now.
    Now i am using ECC 6.0 Release (ERP Central Component Release).
    I would like to know what are the differences in these two reelases...????
    Basically, i would like to know any Differences or Enhanced features with ABAP perspective in ECC 6.0......
    PLease Help me in providing this info.......
    Your Help will be sincerely appreciated.......
    Regards
    Pavan

    Hi Pavan
    below are some of the good features in ECC6.0
    1- Your ABAP code can be unicode enable,so that you can use your code in all the versions
    2-You have a two kind of break point option in ECC6.0.
    3-You have a enhanced debugging screen.
    ECC->enterprise central component.ECC 6.0 is the advanced version.if we consider in technical point of view then i can give u one example.
    In the new version we have enhancement points and enhancement sections along with enhancemnts and BADI'S.SAP has provided these ,so that without going for access keys we can write our code in the enhancement points along with Standard SAP code.So now SAP has provided more user friendly environment.Also a new DEBUGGER also arrived with the new version.Now we can see more things in the new er version of DEBUGGER.
    From the ABAP perspective, few differences are.
    The WS_* function modules used in 4.6c has become obsolete from 4.7C. All the WS_* FMs have been replaced by GUI_* FMs.
    (ii) Concept of Unicode is introduced.
    (iii) Few tables have been modified in ECC6.0.
    Tables TVARV & TTREX have been replaced by TVARVC & TTREXN respectively.
    (iv) we have enhancement points and enhancement sections along with enhancemnts and BADI'S . and we can write the part of code in those points.
    Here is the link for the same
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
    http://service.sap.com/releasenotes
    Check this link ... this link will definitely explin u clearly the difference between the two versions...
    http://www.stonewayinc.com/clients/sap/bestoftour/presentations/SAP_BOT_2_Furlan_IBM.ppt
    See this weblog:
    /people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
    Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_OBJECT=011000358700000810532004E
    Have a look at the SAP Solution Browser (http://solutionbrowser.erp.sap.fmpmedia.com/). It will help you determine the differences between 2 SAP releases.
    Difference between R/3 4.7, ECC5 & ECC6 anyone?
    Difference b/t ABAP4.7  and ECC6.0.
    Refer this link for ECC 5.0 & 6.0:
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    A similar post
    /message/1783778#1783778 [original link is broken]
    You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
    For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
    Release Notes on SAP Web Application Server 6.30
    http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
    Reward all helpfull answers
    Regards
    Pavan

  • Field for ECC 6.0 IDES

    Hi All,
    I would like to download ECC 6.0 IDES (ERP) for Oracle and SQL Server for Window. Which file does I need to download from Market Place?
    Thank.

    Hi Dusit,
    Follow this path.
    http://service.sap.com/swdc --->SAP Software Distribution Center ---> Downloads -->Installations and Upgrades -->My Company's Application Components >SAP ERP> SAP ERP 2005 -->IDES-Version --> Windows --- SQL server.
    Under this download the revelent media list as described in the installation guide.
    You would need the following
    Installation Master CD
    Java component CDs
    Export CDs
    Kernel CD
    Language CD
    Please go through the installation guide before downloading the software to check the correct media list.
    You need OSS ID for download.
    Reward if helpfull.
    Regards,
    Imran
    Edited by: Imran Khan on Feb 20, 2008 8:57 AM

  • ECC 5.0 vs ECC 6.0

    Hi,
    I'm very new SAP ..
    I had few doubts ... experts welcome to clear those ..
    1. I have red few topics and understand that ECC5.0 runs on NW2004 and ECC 6.0 on NW 2004s ... Now i want to ask you ... what exactly ECC 5.0 / ECC 6.0 and components comes along with ?
    2. What exactly meant for NW 2004 / NW 2004s and do we need them to run ECC 5.0 / ECC 6.0
    3. Differences between 2004 and 2004s
    4. Component list comes with NW 2004 / NW 2004s.
    5. If to work on EP, XI, BI and "talk to" them with R/3 .. what exactly i must get installed.
    6. What are the modules comes with SAP R/3 4.6c , 4.7 EE, ECC 5.0 and ECC 6.0
    Thanks
    Krishna Manohar

    hi,
    ECC 5.0 is ERP 2004 Central Component powered by
    NetWeaver 2004 ,whereas ECC6.0 is ERP2005 centaral component powered by NetWewver 2004s.
    For further information on these components see the following link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/76bd3b57743b09e10000000a11402f/frameset.htm

  • Technical Usage for SAP ERP 6.0 EhP4

    Hello gurus,
    I am planning to upgrde my system EC2 which is an SAP ERP 6.0 on an Oracle10g database with OS Windows Server 2003.
    But I dont know which technical usage to choose.
    Using the url http://<hostname>:5<instance number>00/utl/UsageTypesInfo, the following are my system's usage types:
    SAP ERP 2005/SR2     XSS     XSS     Self Services
    SAP ERP 2005/SR2     LSOCP     LSOCP     Learning Solution Content Player
    SAP ERP 2005/SR2     BD     BD     Biller Direct
    SAP ERP 2005/SR2     XECO     XECO     Extended E-Selling Components
    SAP ERP 2005/SR2     ECC     ECC     Central Component
    SAP ERP 2005/SR2     BP-ERP     BP ERP     Business Packages (Portal Content)
    SAP NetWeaver 2004s/SR2     PI     PI     Process Integration
    SAP NetWeaver 2004s/SR2     BI     BI Java     BI Java
    SAP NetWeaver 2004s/SR2     AS     AS Java     Application Server Java
    SAP NetWeaver 2004s/SR2     EPC     EP Core     Enterprise Portal Core Components
    SAP NetWeaver 2004s/SR2     EP     EP     Enterprise Portal
    SAP NetWeaver 2004s/SR2     AAS     AS ABAP     Application Server ABAP
    There seems to be no direct equivalent of these usage types in the technical usages I see on MOPZ.
    Please advise.
    Thanks, Cha Cha

    Hello,
    You may check the attachments in note 1165438 for business function -> technical usage equivalence.
    as for usage types, you seem to have listed product instances instead.  Perhaps you can also have a look at the product instances -> technical usages equivalences in the attachments to note  1165438
    Anyway, the technical usagesI can see right away are:
    - SAP Learning Sol-Frontend CP
    - XSS Self Services
    - SAP FSCM - Biller Direct
    - Central applications
    - SAP XECO
    Netweaver 7 app server ABAP, Netweaver PI, and Enterprise Portal product instances don't have any additional technical usages assigned.
    I suggest also the service http://service.sap.com/bfp for a free service that will help you to select technical usages in your EHP4 install.
    Best regards,
    Miguel Ariñ

  • ECC 6.0 installation on top of Netweaver 7.0 server?

    Hi All,
        We have installed Netweaver 7.0 and configured BW, we need HR component so on top of this netweaver server is it possible to install the ECC 6.0.
    In this case,  not the two seperate instances(and not the MCOD).
    If  it is possible...let me know.
    Thanks and Regards,
    Vivek

    If you have installed the BW server it comes in the NetWeaver component.while ECC 6 is in ERP Component So you need to install BW saperate and ECC saperate.
    you can install two component on the same server like your BW sid is BAW and your ECC sid is EAS so you can have two sid on the same server supported you have good amount of SPACE,CPU and memory on that server.
    You will have to create different file system for both SID.
    you cant have BW and ECC with Same sid
    thanks
    Rishi Abrol

  • How can I know the ECC version on my SAP

    Hello,
    My partner suggested me to change the ECC version to one upper to 5.0, but I don´t know what my version is, How can I know that?
    What is the prerequirement that I need to install an upper version of ECC?
    Thanks.

    "SAP R/3 Enterprise" is "SAP R/3 Enterprise 4.7"
    short excursion to "SAP release versions" (starting at 4.6):
    SAP R/3 4.6C
    SAP R/3 Enterprise 4.7 (Extensions 110)
    SAP R/3 Enterprise 4.7 (Extensions 200)
    SAP ECC 5.0
    SAP ERP 6.0 (formerly known as SAP ECC 6.0)
    next release roundabout 2010 available
    so, starting form your release you can upgrade to the next relese in the line: SAP ECC 5.0 or to the current release (SAP ERP 6.0)
    kr, achim

  • ICWC content management - application object ECC Order

    CRM 5.0 in IMG t-code CRMC_IC_CM in Define Application Object entry ECC Order for the ERP order can be added and assigned to the Content Management profile.
    But if you assign your order in the Agent Inbox to use the ERP order, the document search will not have a link to the order.  Using the CRM sales order screen to open a document will link the order number to the document search.
    SAP help url does not state this is a limitation
    http://help.sap.com/saphelp_crm50/helpdata/en/a4/fc9c426f260b31e10000000a1550b0/frameset.htm
    anyone else using ERP order that can assist?

    Limitation of the system, we tried to develop around ERP order & ONE order but with no success.

  • Open Shopping Cart from ERP Backend

    Hi,
    we are on SRM 7.01 and ECC 6.0 as ERP Backend.
    How can i open a shopping cart with the shopping cart number?. Can i open the shopping cart per URL?
    We have the shopping cart number in ERP Backend.
    Best regards,
    Benjamin Herzig

    Hi,
    erp users should be able to open the shopping cart with one click from sap gui me53n.
    At the moment, they have to copy the shopping cart number and then open the SAP Portal and search for the shopping cart. This is not very userfriendly.
    Can i use any remote function in srm calling from the erp?
    I´m surprised that nobody else needs such as feature!
    Best regards,
    Ben

Maybe you are looking for