ECC 6.0 related syntax error
Hello Folks,
My self Chetan , I am working in ABAP. I am on project, Now we are moving to ECC 6.0 from 4.7 and I am facing problem in some program regarding syntax error. I want remove the syntax error. Currently I am facing two problem.
1. In one program there are three standards includes but they are not define so program is giving error include not found. then how can I remove this error.
2. In second program it's giving error CCR1S table does not have BUKRS field but in 4.7 it BUKRS field is present .
Can any bode please guide me in this issue.
Thanks
Chetan Chauhan.
Hi
1. In one program there are three standards includes but they are not define so program is giving error include not found. then how can I remove this error.
If the program is a custom program as copy of std one, u should check the std program of rel. ecc 6.00 and find out how now the includes are called.
If the program is std, u should active the version of release 6.00
2. In second program it's giving error CCR1S table does not have BUKRS field but in 4.7 it BUKRS field is present .
U should change the program in order to delete the code using that field, if u can't do it u should create a new structure ZCCR1S including CCR1S and add the field BUKRS, then use this new structure instead of std one.
Max
Similar Messages
-
What are the Upgrade related syntax errors
Hi Sudheer,
pls go through the upgrade issues and its solutions...
hope it helps u...
Upgrade Tips & Key Learnings
Problem 1:
In DBCHK_PRE phase in PREPARE RUN fails with the message
Error: Shared library path is insufficient
Solution
Before executing Upgrade Assistant server and GUI please append this
environment variable in both shells with following value and also refer SAP Note:
817463
LD_LIBRARY_PATH-->Append with /sapdb/programs/lib/lib64
Problem 2:
In Upload_Request Phase in PREPARE RUN fails with the message
Error: Full access to directory /usr/sap/trans denied
Solution:
Provide chmod 777 permission to the directory /usr/sap/trans
Problem 3:
In SHDINST_SDB_CHK phase in PREPARE RUN fails with message
Error: Error by create user SAP<SID>SHD
Solution:
We need to create this user manually in Database. Please also refer to SAP Note
39439
Problem 4:
In 'Installation Module' of PREPARE RUN it fails to add the shadow instance
port entries in /etc/services
Solution:
50
Manually enter the shadow instance sapmsSHD<SID>, Sapgw<SYSNR>,
sapdp<SYSNR> and repeat the phase.
Problem 5:
In 'General Checks Module' of PREPARE RUN it fails for Permission issue for
files
Solution:
Add the write permission for the files /usr/sap/<SID>/SYS/exe/run/icnbmd and
/usr/sap/<SID>/SYS/exe/run/saposcol
Problem 6:
In ACT_REL phase of SAPUP it fails with message index /table WEB_FILES
couldn't be activated
Solution:
Please refer SAP Note: 847019
Problem 7:
After the completion of NW2004s ABAP upgrade. We found that saposcol was
missing from /usr/sap/<SID>/SYS/exe/run
Solution:
Copy the saposcol from the directory /usr/sap/put/exe
Errors encountered while executing BEX Applications in Portal
Problem 8
You call a Business Explorer (BEx) Web Application (Java) and the system
Displays the following error message instead of the BEx Web Application:
Portal runtime error
Access denied
This problem may arise because of missing authorizations for the
Security zone in which the BEx Web Application is executed in the
Portal,
51
Solution
Please apply the SAP Note 872043
Problem 9
When you execute a Web Application (NetWeaver2004s), the following
Error message appears: Parameter HIERARCHY_DATE does not exist.
Solution
Import Support Package 07 for SAP NetWeaver 2004s BI (BI Patch 07 or
SAPKW70007) into your BI system. Otherwise, you can enter the table entries
manually as mentioned in note 923122
regards,
rudra...
Assign points if useful... -
Skip first screen & ECC 6 syntax error
Hi,
I have program that is in ECC 6 giving syntax error
call transaction v_tcode using i_bdc options from i_options
messages into i_message
and skip first screen.
I am getting a syntax error that "The additon AND SKIP FIRST SCREEN" cannot be used with "CALL TRANSACTION USING..."
Any info how to correct this.
aRsHi,
Thanks for your reply.
The first screen i am calling in my program
perform bdc_dynpro using 'SAPMYCTC' '0100'.
perform bdc_field using 'BDC_OKCODE' '=ENTR'.
perform bdc_field using 'YCTC-CTCNUMBER'
wa_yctc-ctcnumber.
i am pushing the values to first screen , then i need to screen skip the first screen
aRs -
Hi all,
I have moved one of my program from 4.7 to Ecc 6.0 and when I tried to run it gives me this syntax error " " in include "RFKORI90
"Field "SAVE_OUTPUTDONE" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement .
but when I went in to the include RFKOR190, I have defined this as :
data: save_outputdone type FPOUTDONE.
and this data: FPOUTDONE. is there in ECC 6.0 as domain, so can any one of you please tell me what exactly the problem is.
Thanks,
RajeevHi amiya,
Thanks for the reply, I treid doing what you asked me to do but I am still getting the same error.
So can you please tell me what is going wrong.
Thanks,
Rajeev -
Syntax error in profile relation while retreiving configuration parameters
Trying to get our Directory Services properly functioning after an IP change. Running
# kadmin.local -q listprincs
yesterday revealed that all service principals weren't set up properly. Dig dig dig... found that I might (since this server was originally 10.3--now it's 10.4.4) try
# slapconfig -kerberize diradmin
That pointed me in the direction of using Workgroup Manager to fix a couple things with the KerberosClient record for the server. Did that. Reran the command. It complained about an improperly formatted configuration file because it wiped the contents of edu.mit.Kerberos (took out the DNS bits). Then ran
# kerberosautoconfig -u
which resulted in
MergeLoggingInfo: creating default logging info
At this point, edu.mit.Kerberos looked good. Then I tried
# /usr/sbin/kdcsetup -f /LDAPv3/127.0.0.1 -w -a diradmin -p ** -v 1 REALM
which resulted in
Contacting the Directory Server
Authenticating to the Directory Server
Creating Kerberos directory
Creating KDC Config File
Creating Admin ACL File
Creating Kerberos Master Key
Creating Kerberos Database
Syntax error in profile relation while retreiving configuration parameters
SendInteractiveCommand: failed to get pattern
Creating Kerberos Admin user
kadmin.local: Syntax error in profile relation while initializing kadmin.local interface
Adding kerberos auth authority to admin user
Creating keytab for the admin tools
kadmin.local: Syntax error in profile relation while initializing kadmin.local interface
Adding KDC & kadmind to launchd
Adding the new KDC into the KerberosClient config record
edu.mit.kadmind: Already loaded
com.apple.kdcmond: Already loaded
Finished
Now when I try
# kadmin.local -q listprincs
I get
Authenticating as principal root/admin@REALM with password.
kadmin.local: Syntax error in profile relation while initializing kadmin.local interface
And now I'm getting this in kdc.log
Feb 07 09:41:26 od.master.fqdn krb5kdc[21234](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) xx.xx.xx.xx: LOOKINGUPCLIENT: diradmin@REALM for krbtgt/REALM@REALM, Database is locked or in use--try again later
Feb 07 09:41:26 od.master.fqdn krb5kdc[21234](info): DISPATCH: repeated (retransmitted?) request from xx.xx.xx.xx, resending previous response
Help!
Thanks,
Rich
ps. The typo in the error message is MIT's, not mine. I guess their engineering departments are better than their English department.
Xserve G5 Mac OS X (10.4.4)Look at the two config files:
/Library/Preferences/edu.mit.Kerberos
/var/db/krb5kdc/kdc.log
the Database is locked or in use message is due to a missing lock file.
Look in /var/db/krb5kdc/ for principal.kadm5.lock
Hope this gets you started
- Leland -
Too many syntax errors after upgrade to ECC 6.0
Hello,
We have made a test upgrade from 4.6C to ECC 6.0. OS --> AIX 5.3; DB --> DB2 8.2. After upgrade we have a lot of syntax errors, why? Anybody has the same problem? Do I must to check all my programs?
Thanks.
MartinHello, here there is an example in Z program, but I have seen in no Z programs too with includes or userexits in the second example.
Thanks.
Martin.
first example:
Error in the ABAP Application Program
The current ABAP program "GBT10CO0" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "ZGGBR000 " in include "ZGGBR000
" in
line 279:
""SYST-MODNO" must be a character-type data object (data type C, N, D, "
"T or STRING) ."
second example:
Error in the ABAP Application Program
The current ABAP program "SAPLGBL5" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "GBT10FI0 " in include "GBT10FIB
" in
line 1288:
"The FORM "SEND_CMPLX_DATA_015" does not exist." -
ECC syntax error for ADDFIELD.
Dear Friends,
I am getting a syntax error in ECC, for ADDFIELD.
My original code is :
data: XI_SELTAB LIKE RSPARAMS OCCURS 0 WITH HEADER LINE.
ADDFIELD XI_SELTAB 'ARBPL' V_GEWRK.
Changed code is :
*data: XI_SELTAB LIKE RSPARAMS OCCURS 0 WITH HEADER LINE.
TYPES: ty_XI_SELTAB TYPE RSPARAMS.
Data: XI_SELTAB TYPE standard table of ty_XI_SELTAB.
Data: wa_XI_SELTAB type ty_XI_SELTAB.
ADDFIELD WA_XI_SELTAB 'ARBPL' V_GEWRK.
What is the exact syntax at here?? it not taking from work area.
Thanks,
SridharSorry to all,
Yes Its Micro and defined a like this :
Macros
DEFINE addfield.
&1-sign = 'I'.
&1-kind = 'S'.
use operation cp if the value contains wildcards
if &3 ca '*'.
&1-option = 'CP'.
else.
&1-option = 'EQ'.
endif.
append the field name/value to the selection table
if not &3 is initial.
&1-selname = &2.
&1-low = &3.
append &1.
endif.
clear &1. -
Syntax Error with EXPORT statement in ECC 6
Hi All,
I have one issue with EXPORT statement syntax.
I have declared data like below:
DATA: BEGIN OF mem_id,
mandt LIKE sy-mandt,
uname LIKE sy-uname,
modno LIKE sy-modno,
END OF mem_id.
export the memory id
EXPORT E_VBKOK XANZPK TEXTTAB XBOLNR TO MEMORY ID MEM_ID.
When I am checking the syntax error i am getting like "MEM_ID" must be a character-type field (data type C, N, D or T). by "INTERFACE". by "INTERFACE". "INTERFACE". by "INTERFACE". by "INTERFACE".
I know this statement would be like IMPORT ITAB TO JTAB FROM MEMORY ID 'table'. So I have written like below
EXPORT E_VBKOK XANZPK TEXTTAB XBOLNR TO MEMORY ID 'MEM_ID'. But still it is throwing an error.
Can you please let me know how can I resolve this?
Regards,
Jyothi CH.Hi Jyothi,
data: l_var type string.
concatenate '6' '8' into l_var separated by space.
export l_var to memory id 'BB'.
Here we have to declare the type(structure) for l_var not for BB
and in another program
data:l_var type string.
import l_var from memory id 'BB'.
write : l_var. -
Trap syntax error in trap-schedule.dat alert; possibly SMC related
Receiving many ID xxxxxx daemon.alert events every hour. The message is:
[ID xxxxxx daemon.alert] syslog Nov 10 14:00:10 trap syntax error in trap-schedule.dat(200) at token '???'
followed immediately (same timestamp) with:
[ID yyyyyy daemon.alert] syslog Nov 10 14:00:10 trap *** aborting execution ***
I coudn't find anything on the web specifically for this message but several hits that looked similar seemed to indicate that this might be a problem in SMC. If it is not I apologize in advance.
System is an ldom:
Solaris 10;
SunOS clsol8 5.10 Generic_127127-11 sun4v sparc SUNW,T5140
Current situation is:
# /opt/SUNWsymon/sbin/es-validate
This script will help you in validation of Sun (TM) Management Center.
Validation Tool Version : 4.0
Host name : clsol8
Number of CPUs : 24
Platform : SUNW,T5140
Operating System : SunOS 5.10
Memory size : 2048 Megabytes
Swap space : 595480k used, 3727296k available
JAVA VERSION : "1.5.0_14"
Sun Management Center Production Environment Installation.
Following layers are installed : SERVER, AGENT, CONSOLE
Installation location : /opt/SUNWsymon
Sun Management Center installation status:
PRODUCT : Production Environment
INSTALLATION STATUS : Setup.
DATABASE SETUP : Setup.
COMPLETELY INSTALLED PACKAGES : SUNWescom,SUNWesbui,SUNWesbuh,SUNWenesi,
: SUNWesdb,SUNWesagt,SUNWessrv,SUNWessa,
: SUNWesjp,SUNWesaxp,SUNWesse,SUNWesclt,
: SUNWesjrm,SUNWmeta,SUNWenesf,SUNWesmdr,
: SUNWesgui,SUNWesweb,SUNWessvc,SUNWesasc,
: SUNWescix,SUNWsuagt,SUNWsusrv,SUNWesval,
: SUNWesmc,SUNWessms,SUNWessdv,SUNWescdv,
: SUNWlgsmc,SUNWeslac,SUNWesodbc,SUNWesmib,
: SUNWesken,SUNWesmod,SUNWesae,SUNWesaem,
: SUNWesmcp,SUNWesafm,SUNWescon,SUNWsucon,
: SUNWescli,SUNWesclb
<NOTE: I had to cut out a bunch of installed components to hit character limit>
Sun Management Center Add-Ons and Versions:
PRODUCT VERSION
Production Environment 4.0
Advanced System Monitoring 4.0_Build15
Sun Fire Entry-Level Midrange S 3.5-v6
Service Availability Manager 4.0_Build15
Performance Reporting Manager 4.0_Build15
Solaris Container Manager 4.0_Build15
Sun Fire Midrange Systems Platf 3.5-v6
System Reliability Manager 4.0_Build15
Sun Management Center Integrati 4.0_Build15
Workgroup Server 3.6
Generic X86/X64 Config Reader 4.0_Build15
Sun Management Center Patch installation details:
No Sun Management Center patch is installed.
Sun Management Center disk-space consumption:
PRODUCT APPROXIMATE DISK SPACE CONSUMED
Production Environment : 54452 kB
Advanced System Monitoring : 2391 kB
Sun Fire Entry-Level Midrange S : 1738 kB
Service Availability Manager : 1838 kB
Performance Reporting Manager : 3371 kB
Solaris Container Manager : 3688 kB
Sun Fire Midrange Systems Platf : 3270 kB
System Reliability Manager : 970 kB
Sun Management Center Integrati : 540 kB
Workgroup Server : 3707 kB
Generic X86/X64 Config Reader : 608 kB
TOTAL : 76573 kB
Database is located at : /var/opt/SUNWsymon/db/data/SunMC
Free space available on this partition is : 6493142 kB
Following locales are installed :
Information about upgrade from old versions is not available.
Sun Management Center Ports:
SUNMC COMPONENT PORT_ID
agent service 1161
trap service 162
event service 163
topology service 164
cfgserver service 165
cstservice service 167
metadata service 168
platform service 166
grouping service 5600
rmi service 2099
webserver_HTTP service 8080
webserver_HTTPS service 8443
You are currently running SNMPDX.
Sun Management Center Server Hosts definitions in domain-config.x:
SUNMC COMPONENT SERVER_HOST
agent service clsol8
trap service clsol8
event service clsol8
topology service clsol8
cfgserver service clsol8
cstservice service clsol8
metadata service clsol8
platform service clsol8
Sun Management Center Processes:
SUNMC SERVICE STATUS
Java Server Running.
Database services Not Running.
Grouping service Running.
Event-handler service Running.
Topology service Not Running.
Trap-handler service Not Running.
Configuration service Running.
CST service Not Running.
Metadata Services Running.
Hardware service Not Running.
Web server Running.
Sun Management Center Agent Running.
Platform Agent Not Running.
Privilege level for Sun Management Center users :
CATEGORY USERS
esadm : smcadmin
esdomadm : smcadmin
esops :
ALL USERS : smcadmin
server is local host
Web server package is installed correctly.
Web Server is up and responding.
Web Server servlet engine is up and responding.
I have also read that patching SMC has caused problems for some people so I don't really want to try that until I get some feedback.Hi Mike,
Tried your suggestion to rename the .dat and let SMC recreate it but I can't get the SMC database service to launch. So it looks like I am having trouble with the database. Any suggestions?
To back up, you nailed it with the loss of power - we lost both power supplies on a Sunday night with no warning and nothing in /var/adm/messages (since we send them to a loghost.) It was determined that chips within each power supply in the T5140 failed. So we replaced both power supplies and fired the server up. That is when we started getting the trap errors and only those two errors on clsol8.
I did check http://sun.com/msg/SMF-8000-KS but am not sure how that helps.
What I tried:
On clsol8 as root:
# cd /opt/SUNWsymon/sbin
# ls
{db-memconfig.sh es-details es-imagetool es-setup
db-start es-device es-inst es-start
db-stop es-dt es-keys.sh es-stop
es-apps es-gui-imagetool es-lic es-tool
es-backup es-guiinst es-load-default es-trapdest
es-chelp es-guisetup es-makeagent es-uninst
es-cli es-guistart es-platform es-validate
es-common.sh es-guistop es-restore esmultiip
es-config es-guiuninst es-run ports.config}
# ./es-stop -A
{Stopping metadata component
Stopping cfgserver component
Stopping topology component
Stopping event component
Stopping grouping service
Stopping trap component
Stopping java server
Stopping webserver
Stopping agent component
Stopping platform component}
<attempting Mike's solution suggestion>
# cd /var/opt/SUNWsymon/cfg
# ls
trap-schedule.dat
# mv trap-schedule.dat trap-schedule.dat.maybeCorrupted
# /opt/SUNWsymon/sbin/es-start -Ac
{Some of the SunMC services are in maintenace state.
Please check the corresponding SMF service log in /var/svc/log directory.
Please disable the services in maintenance state and re-start the services again.}
# svcs -vx
svc:/application/management/sunmcdatabase:default (SunMC database service)
State: maintenance since November 6, 2009 3:50:51 PM CST
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/application-management-sunmcdatabase:default.log
Impact: This service is not running.
svc:/application/management/sunmcwebserver:default (SunMC webserver service)
State: maintenance since November 12, 2009 2:45:50 PM CST
Reason: Start method failed repeatedly, last exited with status 103.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/application-management-sunmcwebserver:default.log
Impact: This service is not running.}
# svcadm disable sunmcdatabase
# svcadm disable sunmcwebserver
# svcs -vx
# svcadm enable sunmcdatabase
# svcadm enable sunmcwebserver
# /opt/SUNWsymon/sbin/es-start -Ac
{Failed to successfully perform Database Startup.}
# svcs -vx
svc:/application/management/sunmcdatabase:default (SunMC database service)
State: maintenance since November 12, 2009 2:49:50 PM CST
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/application-management-sunmcdatabase:default.log
Impact: This service is not running.}
# cd /
# svcadm disable sunmcdatabase
# shutdown -y -g0 -i6
(after reboot, I logged into clsol8 and su'd to root)
# svcs -xv
svc:/application/management/sunmcdatabase:default (SunMC database service)
State: disabled since November 12, 2009 3:02:11 PM CST
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
Impact: 1 dependent service is not running:
svc:/application/management/sunmctopology:default}
# svcadm enable sunmcdatabase
# svcadm disable sunmcdatabase
# svcadm clear sunmcdatabase
svcadm: Instance "svc:/application/management/sunmcdatabase:default" is not in a maintenance or degraded state.
# svcadm refresh sunmcdatabase
# svcadm enable sunmcdatabase
# svcs -xv
svc:/application/management/sunmcdatabase:default (SunMC database service)
State: offline since November 12, 2009 3:09:25 PM CST
Reason: Start method is running.
See: http://sun.com/msg/SMF-8000-C4
See: /var/svc/log/application-management-sunmcdatabase:default.log
Impact: 1 dependent service is not running:
svc:/application/management/sunmctopology:default
# svcs -xv
svc:/application/management/sunmcdatabase:default (SunMC database service)
State: maintenance since November 12, 2009 3:10:30 PM CST
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/application-management-sunmcdatabase:default.log
Impact: 1 dependent service is not running:
svc:/application/management/sunmctopology:default
[ Nov 12 15:08:37 Leaving maintenance because disable requested. ]
[ Nov 12 15:08:37 Disabled. ]
[ Nov 12 15:09:07 Rereading configuration. ]
[ Nov 12 15:09:25 Enabled. ]
[ Nov 12 15:09:25 Executing start method ("/lib/svc/method/es-svc.sh start datab
ase") ]
execution of verifyDatabaseUp failed
exiting........................
[ Nov 12 15:10:30 Method "start" exited with status 95 ] -
Query code cotains Syntax Errors
Hello Experts,
In the process of upgrading from 4.6 to 6.0 ECC SAP version, we had some issues at the moment of testing Queries from SQ01 transaction, nevertheless almost all the problems with queries were solved by regenerating them all over again from SQ01 for Queries and SQ02 for Infosets.
Everything was OK so far, until I tested this Query related to PCH Logical Database and realized that It had Syntax Errors and can't run, and the other 5 Queries related to the same Logical Database are having the same Syntax Errors and they can not be fixed by executing the Query from SQ01 or regenerating the Infoset (PCHORG) from SQ02.
I guess the Syntax Errors must be fixed by regenerating the code in the new version, but how can I do this?
Or, is there another process I am skipping to achieve this?
Any ideas on this?
Thanks in advance!Hello VitorDFPinheiro thanks for your answer,
I tried to modify the errors manually but in first Instance this is not possible whitout an Access Key and secondly I think this is not the best practice due the code for queries is generated Automaticaly.
Nevertheless I tried to correct this syntax errors by copying the code and pasted it into a new Z program and compile it, the compiler threw even more errors when I corrected the first one, so I think that this is not the way to procced.
I guess that there should be a way to "regenerate" the query and this "regeneration" must reorganize the code and its syntax.
Any other suggestions?
Edited by: memo_cv on Oct 11, 2010 6:56 PM -
Syntax error in program "SAPLS38E "
Hi BASIS Gurus,
I implemented all the SNOTE's as per the recommendation of RSECNOTE and included all the SNOTE in the same request and transported to Quality System , but the TR ended with warning .
We are now unalbe be run any program in SE38 and even functional modiule , its giving dump error . Please find the error below
The current ABAP program "SAPLSEWORKINGAREA" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLS38E " in include "LS38EU24
" in
line 63:
"FORM "GET_MASLANGU" does not exist"
Please also find the STMS Error
Program SAPLS38E, Include LS38EU24: Syntax error in line 000063
FORM 'GET_MASLANGU' does not exist
Please can you help me in this issue.
Regards,
PradeepHi ,
Please find the list of SNOTES applied
1075850 Forecast with linear regression model
1128669 Material forecast: Period fixing incorrect
1321756 Mass activation: Object activated instead of deleted
1342064 Insufficient monitoring for SXI_CACHE
1356215 Missing authorization check in EMMACLS generation program
1361038 Report RJ-JXINI generates unnecessary source code
1362972 Industry Solution Migration Workbench: Authorization check
1363371 FS-CD: Missing authorization checks SAPRGEN_CD
1450128 Code injection vulnerability in ECC and SAP R/3
1453457 WebReporting: Unauthorized modification of displayed content
1453604 Potential information disclosure relating to ECC and SAP R/3
1453605 Potential information disclosure relating to ECC and SAP R/3
1469982 Code injection vulnerability in ECC and SAP R/3
1470094 Authorization check in report H99_B2AFILE missing
1472395 Unauthorized change of stored contents (agency collections)
1479762 Missing authority check in SAP_RSADMIN_MAINTAIN
1481786 Selection field with more than 22 characters is truncated
1481802 Potential disclosure and modification of persisted data
1499901 Executing arbitrary code with RSNROGEN
1509344 Potential disclosure and modification of persisted data
1514927 Unauthorized modification of displayed content in BW
1520781 Potential disclosure and modification of code and data
1523530 Workflow notification: Length restriction in title of e-mail
1523808 Missing authorization check in CATT or eCATT
1525695 Update #1 for Note 587410: Missing Authorization Check SE37
1527823 XI Runtime: Timestamp in XI Cache application log
1528822 Missing authorization check in WebReporting
1530392 Missing Authorization Check in SW-Delivery tools
1531669 Missing Authorization Check
1536091 Missing Authorization Check in Change logs component.
1536491 ALE: Missing authorization check in ALE monitoring tool
1536640 WebReporting:Unauthorized modification of displayed content
1538218 Potential information disclosure relating to security by WDA
1542645 Users with hardcoded name & password created in BC-DOC-TER
1547271 Missing authorization check in RFC with call transaction
1548848 Potential information disclosure relating to user/processes
1549999 Missing authorization check in the workflow analysis
1554030 Missing authorization check in fumo EPS_DELETE_FILE
1555846 Missing authorization check in WD ABAP tracing tool
1556749 Unauthorized execution of functions in SAP system
1557197 Missing authorization check in portal connection
1560538 Missing authorization check in SCM-APO-INT
1560649 Hard-coded credentials in BCS
1563110 Potential information disclosure relating to FM TH_GREP
1565444 Missing authorization check in Output Server
1567630 Unauthorized modification of displayed content in BC-DOC-TTL
1567635 Unauthorized modification of contents displayed in ICF
1567882 Missing authorization check in BW RFC
1569550 Unauthorized execution of functions in transaction BAPI
1570374 Missing Authorization Check in Package Builder
1570717 Hard-coded credentials in ABAP Workbench
1571944 Missing Authorization Check in ABAP Workbench
1572152 Potential ABAP code generation w/o logging
1572325 Unauthorized modification of displayed content in BW
1572340 Directory traversal in PSE function modules
1572345 Hard-coded credentials in ABAP Task Handler
1572346 Hard-coded credentials in ABAP Test Cockpit
1572714 Missing Authorization Check in Profile Parameter Handling
1574226 Unauthorized modification of displayed content in IC Manager
1575006 Directory Traversal in SPOOL System
1576055 Dangerous ABAP Commands; DELETE REPORT in RSBTCDRP
1577155 Unauthorized modif. of displayed content in WD trace tool
1578393 Hard-coded credentials in BC-SRV-KPR-DMF
1578473 Directory Traversal in Unicode Migration Tools
1580017 Code injection vulnerability in TH_GREP
1580874 Directory traversal in ABAP Syntax Checking
1581644 Unauthorized modification of displayed content in CRM-BPS
1581717 Potential disclosure of persisted data in BW RFC
1582870 ABAP XSS Escaping Support
1583235 Unauthorized modification of displayed content
1583286 Poss. disclosure of authorization verifications in RSTXSCRP
1583301 Missing authorization check in Loans Management
1584002 Unauthorized modification of contents displayed in ICF
1586739 Hard-coded credentials in FI-FM
1587581 Unauthorized use of application functions in workflow (BSP)
1588869 Potential disclosure of persisted data in FIN-FSCM-TRM
1589919 Hard-coded credentials in Function Builder
1590272 Unauthorized modification of stored content:hrrcf_searchhlp
1591048 QPAP: Potential modification or disclosure of persisted data
1591146 Missing authorization check in profile maintenance module
1591349 Missing authorization check in BRF
1591813 Potential disclosure of persisted data in test code
1592029 Missing authorization check in customer master data
1592312 Code injection vulnerability in EC-EIS
1594644 Potential disclosure of persisted data in the monitors
1599072 Directory traversal in RE-BD
1602039 Missing Authorization Check in IS-B-BCA
1606471 Unauthorized modification of displayed content in workflow
1607721 Unauthorized modification of displayed content in Unicode Co
1610299 Unauthorized change to contents in PI message monitoring
1612983 Unauthorized use of appl. functions in mobile extension
1614719 Missing authorization check in ETM planning
1620914 Potential information disclosure relating to passwords
1625060 Missing authorization check in component IS-B-BCA
I will try to do the suggested SNOTE manually also.
Thanks ,
Pradeep -
hi,
ECC 6.0 (ides)
i applied oss note wrt are-1 are-3 1014967 / 1032813 status is completely implemented
but in j1iin & j1ia101/j1ia301 i'm getting
syntax error in program sapmj1iin include MJ1IINF01 line 555 field TMP_EXCACC in unknown
there are fields with similar names EXCACC & EXCAcc1
i tried to revert the note by error message LOCK FOR R3TR applied to request that does not exist or is empty is coming.
Pl suggest , is there any other note to correct this or how to undo the change done by the noteHI
Have you ensured the prerequisites before applying note 1032813 advanced corrections for budget like
Please follow the steps given below -
1. Ensure that the below mentioned prerequisites have been met before applying the corrections including code, DDIC, function module, screen changes, that are present in this note:
927189 - To prioritize the order in which the related notes in this note are to be applied, refer to the attachment 'Master_Note_for_Budget_2007.zip' present in the note 1032265.
Configure the tax and pricing for SD as suggested in the attachment 'SECess-SD-config.zip' present in the note 1032265. For customers using the tax procedure TAXINN, also refer the attachment 'SECess_Config_for_TAXINN.zip' present in the note 1032265.
Make the screen changes as suggested in the attachment 'Screen_changes_budget_2007.zip' present in the note 1032265.
Apply the code corrections present in the note 978186.
Apply the code corrections present in this note.
Apply the code corrections present in the note 1032928 and 1033531
regards
Also check your patch level -
DB2 9.7 DFACT.SQL syntax error in Import ABAP phase - System Copy
Hi all. I'm trying a system copy with a source system SAP ECC 6.0 ehp4 based on NW 701 and db2 LUW 9.1 .
As it seems supported by SAP, i'm using db2 LUW 9.7 in target system.
O.S. is Windows 2008.
I got an error in phase "Import ABAP".
Sapinst.log says:
INFO 2010-02-18 10:12:14.337
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2010-02-18 10:12:14.509
Switched to user: devadm.
INFO 2010-02-18 10:12:14.572
Creating file C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\import_monitor.java.log.
INFO 2010-02-18 10:12:14.603
Switched to user: devadm.
INFO 2010-02-18 10:12:14.618
Working directory changed to C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP.
INFO 2010-02-18 10:12:14.618
Output of C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2010-02-18 10:12:44.790
Execution of the command "C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_24-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_24-rev-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_24-rev-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 73, failed 0, total 75.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 73, failed 1, total 75.
WARNING[E] 2010-02-18 10:12:44.790
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-02-18 10:12:44.790
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Looking into import_monitor.java.log i found that the problem is in dfact import.
I've looked into sapdfact.log and i found:
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100218105045
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Jan 28 2010 20:22:25
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
(DB) INFO: connected to DB
(DB6) INFO: COMPRESS YES is set during table creation.
(DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
(DB6) Compression threshold is ignored.
(GSI) INFO: dbname = "DEV "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SRVSAPDEV"
(GSI) INFO: release = "6.0"
(GSI) INFO: version = "6002 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 26 Step 5)"
(DB) ERROR: DDL statement failed with SQL error
( ALTER TABLE "/BI0/E0PPM_VC1" DROP PRIMARY KEY )
(SQL error -539)
error message returned by dsql:
SQL0539N Table or nickname "SAPDEV./BI0/E0PPM_VC1" does not have a "PRIMARY" key. SQLSTATE=42888
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB6) INFO: executing DDL statements for object /BI0/E0PPM_VC1 from external SQL file.
(DB) ERROR: DDL statement failed with SQL error
( CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1" ("KEY_0PPM_VC1T" , "KEY_0PPM_VC11" , "KEY_0PPM_VC1U" , "KEY_0PPM_VC1P" ) USING STOGROUP ___FAI PRIQTY 16 SECQTY 10240 FREEPAGE 0 PCTFREE 0 GBPCACHE CHANGED DEFINE NO BUFFERPOOL BP3 COPY NO PIECESIZE 2097152 K CLUSTER NOT PADDED )
(SQL error -7)
error message returned by dsql:
SQL0007N The character "_" following "" ) USING STOGROUP" is not valid. SQLSTATE=42601
(DB) INFO: disconnected from DB
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100218105045
So as you can see it seems that there's some syntax error in dfacl.log. The wrong SQL statement referred by sapdfact.log is
ind: /BI0/E0PPM_VC1~0
sql: CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"
("KEY_0PPM_VC1T" ,
"KEY_0PPM_VC11" ,
"KEY_0PPM_VC1U" ,
"KEY_0PPM_VC1P" )
USING STOGROUP ___FAI PRIQTY 16
SECQTY 10240 FREEPAGE 0 PCTFREE 0
GBPCACHE CHANGED DEFINE NO
BUFFERPOOL BP3 COPY NO
PIECESIZE 2097152 K CLUSTER NOT PADDED ;
|
ALTER TABLE "/BI0/E0PPM_VC1"
ADD PRIMARY KEY ("KEY_0PPM_VC1T",
"KEY_0PPM_VC11",
"KEY_0PPM_VC1U",
"KEY_0PPM_VC1P") ;
Am i missing something?
Data in referred tables (infocubes) isn't really important.
Is there a safe way to proceed?
Thanks in advance.
Regards
Simone ZaffalonAnd this is the strange point: my source system is not a BI and my dataclasses .SQL files are not empty.
Me too i would expect that the files should be empty but instead they are full of object definitions.
For example i have APPL0.SQL that contains a list of all tables of ECC system, for example
tab: MAMT
sql: CREATE TABLE "MAMT"
("MANDT" SAPDB6VARCHAR(000003)
DEFAULT '000' NOT NULL,
"MATNR" SAPDB6VARCHAR(000018)
DEFAULT ' ' NOT NULL,
"SPRAS" SAPDB6VARCHAR(000001)
DEFAULT ' ' NOT NULL,
"MEINH" SAPDB6VARCHAR(000003)
DEFAULT ' ' NOT NULL,
"MTXID" SAPDB6VARCHAR(000002)
DEFAULT ' ' NOT NULL,
"LFDNR" SAPDB6VARCHAR(000002)
DEFAULT '00' NOT NULL,
"MAKTM" SAPDB6VARCHAR(000040)
DEFAULT ' ' NOT NULL)
IN "&location&"
INDEX IN "&locationI&"
LONG IN "&locationL&"
COMPRESS YES;
ALTER TABLE "MAMT" LOCKSIZE ROW;
and like this for all others tables.
What would occur if i launch an import with such .SQL files?
(shuld i put this question to another thread or is fine for you to answer on this?)
Thank you again.
Simone Zaffalon -
[SOLVED] Php.ini syntax error, unexpected '&'
Hi guys,
I'm having a trouble setting up a local hosted LAMP, I want to enable the error reporting and display, but it's giving me this error:
[root@albert albert]# php
PHP: syntax error, unexpected '&' in /etc/php/php.ini on line 105
Line 105:
; error_reporting
Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED ; this is the 105
Development Value: E_ALL
Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
And when I access to on localhost/phpmyadmin:
Fatal error: Call to undefined function PMA_DBI_num_rows() in /usr/share/webapps/phpMyAdmin/libraries/navigation/Nodes/Node.class.php on line 408
When I comment the line 105,106,107, it works as I expected, but I can't see any error output...
Here it's the entire php.ini:
[PHP]
; About php.ini ;
; PHP's initialization file, generally called php.ini, is responsible for
; configuring many of the aspects of PHP's behavior.
; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server's directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the --with-config-file-path compile time option, or the
; Windows directory (C:\windows or C:\winnt)
; See the PHP docs for more specific information.
; http://php.net/configuration.file
; The syntax of the file is extremely simple. Whitespace and lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory. Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from www.example.com. Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://php.net/ini.sections
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation. If PHP can't find an expected
; directive because it is not set or is mistyped, a default value will be used.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
; previously set variable or directive (e.g. ${foo})
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; ^ bitwise XOR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = None ; sets foo to an empty string
; foo = "None" ; sets foo to the string 'None'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
; About this file ;
; PHP comes packaged with two INI files. One that is recommended to be used
; in production environments and one that is recommended to be used in
; development environments.
; php.ini-production contains settings which hold security, performance and
; best practices at its core. But please be aware, these settings may break
; compatibility with older or less security conscience applications. We
; recommending using the production ini in production and testing environments.
; php.ini-development is very similar to its production variant, except it's
; much more verbose when it comes to errors. We recommending using the
; development version only in development environments as errors shown to
; application users can inadvertently leak otherwise secure information.
; Quick Reference ;
; The following are all the settings which are different in either the production
; or development versions of the INIs with respect to PHP's default behavior.
; Please see the actual settings later in the document for more details as to why
; we recommend these changes in PHP's behavior.
; display_errors
Default Value: On
Development Value: On
Production Value: Off
; display_startup_errors
Default Value: Off
Development Value: On
Production Value: Off
; error_reporting
Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
Development Value: E_ALL
Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
; html_errors
Default Value: On
Development Value: On
Production value: On
; log_errors
Default Value: Off
Development Value: On
Production Value: On
; max_input_time
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; output_buffering
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; register_argc_argv
; Default Value: On
; Development Value: Off
; Production Value: Off
; request_order
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; session.bug_compat_42
; Default Value: On
; Development Value: On
; Production Value: Off
; session.bug_compat_warn
; Default Value: On
; Development Value: On
; Production Value: Off
; session.gc_divisor
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; session.hash_bits_per_character
; Default Value: 4
; Development Value: 5
; Production Value: 5
; short_open_tag
; Default Value: On
; Development Value: Off
; Production Value: Off
; track_errors
; Default Value: Off
; Development Value: On
; Production Value: Off
; url_rewriter.tags
; Default Value: "a=href,area=href,frame=src,form=,fieldset="
; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; variables_order
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS"
; php.ini Options ;
; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
;user_ini.filename = ".user.ini"
; To disable this feature set this option to empty value
;user_ini.filename =
; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300
; Language Options ;
; Enable the PHP scripting language engine under Apache.
; http://php.net/engine
engine = On
; This directive determines whether or not PHP will recognize code between
; <? and ?> tags as PHP source which should be processed as such. It's been
; recommended for several years that you not use the short tag "short cut" and
; instead to use the full <?php and ?> tag combination. With the wide spread use
; of XML and use of these tags by other languages, the server can become easily
; confused and end up parsing the wrong code in the wrong context. But because
; this short cut has been a feature for such a long time, it's currently still
; supported for backwards compatibility, but we recommend you don't use them.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/short-open-tag
short_open_tag = Off
; Allow ASP-style <% %> tags.
; http://php.net/asp-tags
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
; http://php.net/precision
precision = 14
; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application's output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you've already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
; functions.
; Possible Values:
; On = Enabled and buffer is unlimited. (Use with caution)
; Off = Disabled
; Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://php.net/output-buffering
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
; http://php.net/output-handler
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
; http://php.net/zlib.output-compression
zlib.output_compression = Off
; http://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; http://php.net/zlib.output-handler
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; http://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush = Off
; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =
; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 17
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/open-basedir
open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/:/home/albert/Dropbox/bitday/
; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-functions
disable_functions =
; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-classes
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <span style="color: ???????"> would work.
; http://php.net/syntax-highlighting
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.default = #0000BB
;highlight.html = #000000
; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long requests, which may end up
; being interrupted by the user or a browser timing out. PHP's default behavior
; is to disable this feature.
; http://php.net/ignore-user-abort
;ignore_user_abort = On
; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; http://php.net/realpath-cache-size
;realpath_cache_size = 16k
; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; http://php.net/realpath-cache-ttl
;realpath_cache_ttl = 120
; Enables or disables the circular reference collector.
; http://php.net/zend.enable-gc
zend.enable_gc = On
; If enabled, scripts may be written in encodings that are incompatible with
; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
; encodings. To use this feature, mbstring extension must be enabled.
; Default: Off
;zend.multibyte = Off
; Allows to set the default encoding for the scripts. This value will be used
; unless "declare(encoding=...)" directive appears at the top of the script.
; Only affects if zend.multibyte is set.
; Default: ""
;zend.script_encoding =
; Miscellaneous ;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
; http://php.net/expose-php
expose_php = On
; Resource Limits ;
; Maximum execution time of each script, in seconds
; http://php.net/max-execution-time
; Note: This directive is hardcoded to 0 for the CLI SAPI
max_execution_time = 30
; Maximum amount of time each script may spend parsing request data. It's a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Note: This directive is hardcoded to -1 for the CLI SAPI
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; http://php.net/max-input-time
max_input_time = 60
; Maximum input variable nesting level
; http://php.net/max-input-nesting-level
;max_input_nesting_level = 64
; How many GET/POST/COOKIE input variables may be accepted
; max_input_vars = 1000
; Maximum amount of memory a script may consume (128MB)
; http://php.net/memory-limit
memory_limit = 128M
; Error handling and logging ;
; This directive informs PHP of which errors, warnings and notices you would like
; it to take action for. The recommended way of setting values for this
; directive is through the use of the error level constants and bitwise
; operators. The error level constants are below here for convenience as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best practices and
; recommended coding standards in PHP. For performance reasons, this is the
; recommend error reporting setting. Your production server shouldn't be wasting
; resources complaining about best practices and coding standards. That's what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL. This
; means it pretty much reports everything which is exactly what you want during
; development and early testing.
; Error Level Constants:
; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; E_DEPRECATED - warn about code that will not work in future versions
; of PHP
; E_USER_DEPRECATED - user-generated deprecation warnings
; Common Values:
; E_ALL (Show all errors, warnings and notices including coding standards.)
; E_ALL & ~E_NOTICE (Show all errors, except for notices)
; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
; Development Value: E_ALL
; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
; http://php.net/error-reporting
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
; This directive controls whether or not and where PHP will output errors,
; notices and warnings too. Error output is very useful during development, but
; it could be very dangerous in production environments. Depending on the code
; which is triggering the error, sensitive information could potentially leak
; out of your application such as database usernames and passwords or worse.
; It's recommended that errors be logged on production servers rather than
; having the errors sent to STDOUT.
; Possible Values:
; Off = Do not display any errors
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/display-errors
display_errors = Off
; The display of errors which occur during PHP's startup sequence are handled
; separately from display_errors. PHP's default behavior is to suppress those
; errors from clients. Turning the display of startup errors on can be useful in
; debugging configuration problems. But, it's strongly recommended that you
; leave this setting off on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/display-startup-errors
display_startup_errors = Off
; Besides displaying errors, PHP can also log errors to locations such as a
; server-specific log, STDERR, or a location specified by the error_log
; directive found below. While errors should not be displayed on productions
; servers they should still be monitored and logging is a great way to do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; http://php.net/log-errors
log_errors = On
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
; http://php.net/log-errors-max-len
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
; http://php.net/ignore-repeated-errors
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
; http://php.net/ignore-repeated-source
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
; http://php.net/report-memleaks
report_memleaks = On
; This setting is on by default.
;report_zend_debug = 0
; Store the last error/warning message in $php_errormsg (boolean). Setting this value
; to On can assist in debugging and is appropriate for development servers. It should
; however be disabled on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/track-errors
track_errors = Off
; Turn off normal error reporting and emit XML-RPC error XML
; http://php.net/xmlrpc-errors
;xmlrpc_errors = 0
; An XML-RPC faultCode
;xmlrpc_error_number = 0
; When PHP displays or logs an error, it has the capability of formatting the
; error message as HTML for easier reading. This directive controls whether
; the error message is formatted as HTML or not.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: On
; Development Value: On
; Production value: On
; http://php.net/html-errors
html_errors = On
; If html_errors is set to On *and* docref_root is not empty, then PHP
; produces clickable error messages that direct to a page describing the error
; or function causing the error in detail.
; You can download a copy of the PHP manual from http://php.net/docs
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot. PHP's default behavior is to leave these settings empty, in which
; case no links to documentation are generated.
; Note: Never use this feature for production boxes.
; http://php.net/docref-root
; Examples
;docref_root = "/phpmanual/"
; http://php.net/docref-ext
;docref_ext = .html
; String to output before an error message. PHP's default behavior is to leave
; this setting blank.
; http://php.net/error-prepend-string
; Example:
;error_prepend_string = "<span style='color: #ff0000'>"
; String to output after an error message. PHP's default behavior is to leave
; this setting blank.
; http://php.net/error-append-string
; Example:
;error_append_string = "</span>"
; Log errors to specified file. PHP's default behavior is to leave this value
; empty.
; http://php.net/error-log
; Example:
;error_log = php_errors.log
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
;windows.show_crt_warning
; Default value: 0
; Development value: 0
; Production value: 0
; Data Handling ;
; The separator used in PHP generated URLs to separate arguments.
; PHP's default setting is "&".
; http://php.net/arg-separator.output
; Example:
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; PHP's default setting is "&".
; NOTE: Every character in this directive is considered as separator!
; http://php.net/arg-separator.input
; Example:
;arg_separator.input = ";&"
; This directive determines which super global arrays are registered when PHP
; starts up. G,P,C,E & S are abbreviations for the following respective super
; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
; paid for the registration of these arrays and because ENV is not as commonly
; used as the others, ENV is not recommended on productions servers. You
; can still get access to the environment variables through getenv() should you
; need to.
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS";
; http://php.net/variables-order
variables_order = "GPCS"
; This directive determines which super global data (G,P,C,E & S) should
; be registered into the super global array REQUEST. If so, it also determines
; the order in which that data is registered. The values for this directive are
; specified in the same manner as the variables_order directive, EXCEPT one.
; Leaving this value empty will cause PHP to use the value set in the
; variables_order directive. It does not mean it will leave the super globals
; array REQUEST empty.
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; http://php.net/request-order
request_order = "GP"
; This directive determines whether PHP registers $argv & $argc each time it
; runs. $argv contains an array of all the arguments passed to PHP when a script
; is invoked. $argc contains an integer representing the number of arguments
; that were passed when the script was invoked. These arrays are extremely
; useful when running scripts from the command line. When this directive is
; enabled, registering these variables consumes CPU cycles and memory each time
; a script is executed. For performance reasons, this feature should be disabled
; on production servers.
; Note: This directive is hardcoded to On for the CLI SAPI
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-argc-argv
register_argc_argv = Off
; When enabled, the ENV, REQUEST and SERVER variables are created when they're
; first used (Just In Time) instead of when the script starts. If these
; variables are not used within a script, having this directive on will result
; in a performance gain. The PHP directive register_argc_argv must be disabled
; for this directive to have any affect.
; http://php.net/auto-globals-jit
auto_globals_jit = On
; Whether PHP will read the POST data.
; This option is enabled by default.
; Most likely, you won't want to disable this option globally. It causes $_POST
; and $_FILES to always be empty; the only way you will be able to read the
; POST data will be through the php://input stream wrapper. This can be useful
; to proxy requests or to process the POST data in a memory efficient fashion.
; http://php.net/enable-post-data-reading
;enable_post_data_reading = Off
; Maximum size of POST data that PHP will accept.
; Its value may be 0 to disable the limit. It is ignored if POST data reading
; is disabled through enable_post_data_reading.
; http://php.net/post-max-size
post_max_size = 8M
; Automatically add files before PHP document.
; http://php.net/auto-prepend-file
auto_prepend_file =
; Automatically add files after PHP document.
; http://php.net/auto-append-file
auto_append_file =
; By default, PHP will output a character encoding using
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
; http://php.net/default-mimetype
default_mimetype = "text/html"
; PHP's default character set is set to empty.
; http://php.net/default-charset
;default_charset = "UTF-8"
; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
; to disable this feature. If post reading is disabled through
; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
; http://php.net/always-populate-raw-post-data
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
include_path = ".:/usr/share/pear"
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
; PHP's default setting for include_path is ".;/path/to/php/pear"
; http://php.net/include-path
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
; http://php.net/doc-root
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
; http://php.net/user-dir
user_dir =
; Directory in which the loadable extensions (modules) reside.
; http://php.net/extension-dir
extension_dir = "/usr/lib/php/modules/"
; On windows:
; extension_dir = "ext"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; http://php.net/enable-dl
enable_dl = Off
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; http://php.net/cgi.force-redirect
;cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request. PHP's default behavior is to disable this feature.
;cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; http://php.net/cgi.redirect-status-env
;cgi.redirect_status_env =
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; http://php.net/cgi.fix-pathinfo
;cgi.fix_pathinfo=1
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; http://php.net/fastcgi.impersonate
;fastcgi.impersonate = 1
; Disable logging through FastCGI connection. PHP's default behavior is to enable
; this feature.
;fastcgi.logging = 0
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
; http://php.net/cgi.rfc2616-headers
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
; http://php.net/file-uploads
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; http://php.net/upload-tmp-dir
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 2M
; Maximum number of files that can be uploaded via a single request
max_file_uploads = 20
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-fopen
allow_url_fopen = On
; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-include
allow_url_include = Off
; Define the anonymous ftp password (your email address). PHP's default setting
; for this is empty.
; http://php.net/from
;from="[email protected]"
; Define the User-Agent string. PHP's default setting for this is empty.
; http://php.net/user-agent
;user_agent="PHP"
; Default timeout for socket based streams (seconds)
; http://php.net/default-socket-timeout
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; http://php.net/auto-detect-line-endings
;auto_detect_line_endings = Off
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example, on Windows:
; extension=msql.dll
; ... or under UNIX:
; extension=msql.so
; ... or with a path:
; extension=/path/to/extension/msql.so
; If you only provide the name of the extension, PHP will look for it in its
; default extension directory.
;extension=bcmath.so
;extension=bz2.so
;extension=calendar.so
extension=curl.so
;extension=dba.so
;extension=enchant.so
;extension=exif.so
;extension=ftp.so
;extension=gd.so
extension=gettext.so
;extension=gmp.so
;extension=iconv.so
;extension=imap.so
;extension=intl.so
;extension=ldap.so
;extension=mcrypt.so
;extension=mssql.so
;extension=mysqli.so
;extension=mysql.so
;extension=odbc.so
;extension=openssl.so
;extension=pdo_mysql.so
;extension=pdo_odbc.so
;extension=pdo_pgsql.so
;extension=pdo_sqlite.so
;extension=pgsql.so
;extension=phar.so
;extension=posix.so
;extension=pspell.so
;extension=shmop.so
;extension=snmp.so
;extension=soap.so
;extension=sockets.so
;extension=sqlite3.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=xmlrpc.so
;extension=xsl.so
;extension=zip.so
; Module Settings ;
[CLI Server]
; Whether the CLI web server uses ANSI color coding in its terminal output.
cli_server.color = On
[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
;date.timezone =
; http://php.net/date.default-latitude
;date.default_latitude = 31.7667
; http://php.net/date.default-longitude
;date.default_longitude = 35.2333
; http://php.net/date.sunrise-zenith
;date.sunrise_zenith = 90.583333
; http://php.net/date.sunset-zenith
;date.sunset_zenith = 90.583333
[filter]
; http://php.net/filter.default
;filter.default = unsafe_raw
; http://php.net/filter.default-flags
;filter.default_flags =
[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1
[intl]
;intl.default_locale =
; This directive allows you to produce PHP errors when some error
; happens within intl functions. The value is the level of the error produced.
; Default is 0, which does not produce any errors.
;intl.error_level = E_WARNING
[sqlite]
; http://php.net/sqlite.assoc-case
;sqlite.assoc_case = 0
[sqlite3]
;sqlite3.extension_dir =
[Pcre]
;PCRE library backtracking limit.
; http://php.net/pcre.backtrack-limit
;pcre.backtrack_limit=100000
;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
; http://php.net/pcre.recursion-limit
;pcre.recursion_limit=100000
[Pdo]
; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
; http://php.net/pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict
;pdo_odbc.db2_instance_name
[Pdo_mysql]
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/pdo_mysql.cache_size
pdo_mysql.cache_size = 2000
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/pdo_mysql.default-socket
pdo_mysql.default_socket=
[Phar]
; http://php.net/phar.readonly
;phar.readonly = On
; http://php.net/phar.require-hash
;phar.require_hash = On
;phar.cache_list =
[mail function]
; For Win32 only.
; http://php.net/smtp
SMTP = localhost
; http://php.net/smtp-port
smtp_port = 25
; For Win32 only.
; http://php.net/sendmail-from
;sendmail_from = [email protected]
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
; http://php.net/sendmail-path
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
mail.add_x_header = On
; The path to a log file that will log all mail() calls. Log entries include
; the full path of the script, line number, To address and headers.
;mail.log =
; Log mail to syslog (Event Log on NT, not valid in Windows 95).
;mail.log = syslog
[SQL]
; http://php.net/sql.safe-mode
sql.safe_mode = Off
[ODBC]
; http://php.net/odbc.default-db
;odbc.default_db = Not yet implemented
; http://php.net/odbc.default-user
;odbc.default_user = Not yet implemented
; http://php.net/odbc.default-pw
;odbc.default_pw = Not yet implemented
; Controls the ODBC cursor model.
; Default: SQL_CURSOR_STATIC (default).
;odbc.default_cursortype
; Allow or prevent persistent links.
; http://php.net/odbc.allow-persistent
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
; http://php.net/odbc.check-persistent
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
; http://php.net/odbc.max-persistent
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/odbc.max-links
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
; http://php.net/odbc.defaultlrl
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of odbc.defaultlrl and odbc.defaultbinmode
; http://php.net/odbc.defaultbinmode
odbc.defaultbinmode = 1
;birdstep.max_links = -1
[Interbase]
; Allow or prevent persistent links.
ibase.allow_persistent = 1
; Maximum number of persistent links. -1 means no limit.
ibase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
ibase.max_links = -1
; Default database name for ibase_connect().
;ibase.default_db =
; Default username for ibase_connect().
;ibase.default_user =
; Default password for ibase_connect().
;ibase.default_password =
; Default charset for ibase_connect().
;ibase.default_charset =
; Default timestamp format.
ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
; Default date format.
ibase.dateformat = "%Y-%m-%d"
; Default time format.
ibase.timeformat = "%H:%M:%S"
[MySQL]
; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
; http://php.net/mysql.allow_local_infile
mysql.allow_local_infile = On
; Allow or prevent persistent links.
; http://php.net/mysql.allow-persistent
mysql.allow_persistent = On
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysql.cache_size
mysql.cache_size = 2000
; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysql.max-persistent
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/mysql.max-links
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysql.default-port
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysql.default-socket
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysql.default-host
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysql.default-user
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysql.default-password
mysql.default_password =
; Maximum time (in seconds) for connect timeout. -1 means no limit
; http://php.net/mysql.connect-timeout
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
; http://php.net/mysql.trace-mode
mysql.trace_mode = Off
[MySQLi]
; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysqli.max-persistent
mysqli.max_persistent = -1
; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
; http://php.net/mysqli.allow_local_infile
;mysqli.allow_local_infile = On
; Allow or prevent persistent links.
; http://php.net/mysqli.allow-persistent
mysqli.allow_persistent = On
; Maximum number of links. -1 means no limit.
; http://php.net/mysqli.max-links
mysqli.max_links = -1
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysqli.cache_size
mysqli.cache_size = 2000
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysqli.default-port
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysqli.default-socket
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysqli.default-host
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysqli.default-user
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysqli.default-pw
mysqli.default_pw =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mysqlnd]
; Enable / Disable collection of general statistics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_statistics
mysqlnd.collect_statistics = On
; Enable / Disable collection of memory usage statistics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_memory_statistics
mysqlnd.collect_memory_statistics = Off
; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
; http://php.net/mysqlnd.net_cmd_buffer_size
;mysqlnd.net_cmd_buffer_size = 2048
; Size of a pre-allocated buffer used for reading data sent by the server in
; bytes.
; http://php.net/mysqlnd.net_read_buffer_size
;mysqlnd.net_read_buffer_size = 32768
[OCI8]
; Connection: Enables privileged connections using external
; credentials (OCI_SYSOPER, OCI_SYSDBA)
; http://php.net/oci8.privileged-connect
;oci8.privileged_connect = Off
; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
; http://php.net/oci8.max-persistent
;oci8.max_persistent = -1
; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
; http://php.net/oci8.persistent-timeout
;oci8.persistent_timeout = -1
; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
; http://php.net/oci8.ping-interval
;oci8.ping_interval = 60
; Connection: Set this to a user chosen connection class to be used
; for all pooled server requests with Oracle 11g Database Resident
; Connection Pooling (DRCP). To use DRCP, this value should be set to
; the same string for all web servers running the same application,
; the database pool must be configured, and the connection string must
; specify to use a pooled server.
;oci8.connection_class =
; High Availability: Using On lets PHP receive Fast Application
; Notification (FAN) events generated when a database node fails. The
; database must also be configured to post FAN events.
;oci8.events = Off
; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
; http://php.net/oci8.statement-cache-size
;oci8.statement_cache_size = 20
; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
; http://php.net/oci8.default-prefetch
;oci8.default_prefetch = 100
; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
; http://php.net/oci8.old-oci-close-semantics
;oci8.old_oci_close_semantics = Off
[PostgreSQL]
; Allow or prevent persistent links.
; http://php.net/pgsql.allow-persistent
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; http://php.net/pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
; http://php.net/pgsql.max-persistent
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
; http://php.net/pgsql.max-links
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; http://php.net/pgsql.ignore-notice
pgsql.ignore_notice = 0
; Log PostgreSQL backends Notice message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; http://php.net/pgsql.log-notice
pgsql.log_notice = 0
[Sybase-CT]
; Allow or prevent persistent links.
; http://php.net/sybct.allow-persistent
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
; http://php.net/sybct.max-persistent
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/sybct.max-links
sybct.max_links = -1
; Minimum server message severity to display.
; http://php.net/sybct.min-server-severity
sybct.min_server_severity = 10
; Minimum client message severity to display.
; http://php.net/sybct.min-client-severity
sybct.min_client_severity = 10
; Set per-context timeout
; http://php.net/sybct.timeout
;sybct.timeout=
;sybct.packet_size
; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
; Default: one minute
;sybct.login_timeout=
; The name of the host you claim to be connecting from, for display by sp_who.
; Default: none
;sybct.hostname=
; Allows you to define how often deadlocks are to be retried. -1 means "forever".
; Default: 0
;sybct.deadlock_retry_count=
[bcmath]
; Number of decimal digits for all bcmath functions.
; http://php.net/bcmath.scale
bcmath.scale = 0
[browscap]
; http://php.net/browscap
;browscap = extra/browscap.ini
[Session]
; Handler used to store/retrieve data.
; http://php.net/session.save-handler
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
; The path can be defined as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
; http://php.net/session.save-path
;session.save_path = "/tmp"
; Whether to use cookies.
; http://php.net/session.use-cookies
session.use_cookies = 1
; http://php.net/session.cookie-secure
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
session.use_only_cookies = 1
; Name of the session (used as cookie name).
; http://php.net/session.name
session.name = PHPSESSID
; Initialize session on request startup.
; http://php.net/session.auto-start
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; http://php.net/session.cookie-lifetime
session.cookie_lifetime = 0
; The path for which the cookie is valid.
; http://php.net/session.cookie-path
session.cookie_path = /
; The domain for which the cookie is valid.
; http://php.net/session.cookie-domain
session.cookie_domain =
; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
; http://php.net/session.cookie-httponly
session.cookie_httponly =
; Handler used to serialize data. php is the standard serializer of PHP.
; http://php.net/session.serialize-handler
session.serialize_handler = php
; Defines the probability that the 'garbage collection' process is started
; on every session initialization. The probability is calculated by using
; gc_probability/gc_divisor. Where session.gc_probability is the numerator
; and gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.gc-probability
session.gc_probability = 1
; Defines the probability that the 'garbage collection' process is started on every
; session initialization. The probability is calculated by using the following equation:
; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
; session.gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request. Increasing this value to 1000 will give you
; a 0.1% chance the gc will run on any give request. For high volume production servers,
; this is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; http://php.net/session.gc-divisor
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
; http://php.net/session.gc-maxlifetime
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; find /path/to/sessions -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope.
; PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled. This feature
; introduces some serious security problems if not handled correctly. It's
; recommended that you do not use this feature on production servers. But you
; should enable this on development servers and enable the warning as well. If you
; do not enable the feature on development servers, you won't be warned when it's
; used and debugging errors caused by this can be difficult to track down.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-42
session.bug_compat_42 = Off
; This setting controls whether or not you are warned by PHP when initializing a
; session value into the global space. session.bug_compat_42 must be enabled before
; these warnings can be issued by PHP. See the directive above for more information.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-warn
session.bug_compat_warn = Off
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; http://php.net/session.referer-check
session.referer_check =
; How many bytes to read from the file.
; http://php.net/session.entropy-length
;session.entropy_length = 32
; Specified here to create the session id.
; http://php.net/session.entropy-file
; Defaults to /dev/urandom
; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
; If neither are found at compile time, the default is no entropy file.
; On windows, setting the entropy_length setting will activate the
; Windows random source (using the CryptoAPI)
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; http://php.net/session.cache-limiter
session.cache_limiter = nocache
; Document expires after n minutes.
; http://php.net/session.cache-expire
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
session.use_trans_sid = 0
; Select a hash function for use in generating session ids.
; Possible Values
; 0 (MD5 128 bits)
; 1 (SHA-1 160 bits)
; This option may also be set to the name of any hash function supported by
; the hash extension. A list of available hashes is returned by the hash_algos()
; function.
; http://php.net/session.hash-function
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
; 4 (4 bits: 0-9, a-f)
; 5 (5 bits: 0-9, a-v)
; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
; Default Value: 4
; Development Value: 5
; Production Value: 5
; http://php.net/session.hash-bits-per-character
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
; Default Value: "a=href,area=href,frame=src,form=,fieldset="
; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; http://php.net/url-rewriter.tags
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
; Enable upload progress tracking in $_SESSION
; Default Value: On
; Development Value: On
; Production Value: On
; http://php.net/session.upload-progress.enabled
;session.upload_progress.enabled = On
; Cleanup the progress information as soon as all POST data has been read
; (i.e. upload completed).
; Default Value: On
; Development Value: On
; Production Value: On
; http://php.net/session.upload-progress.cleanup
;session.upload_progress.cleanup = On
; A prefix used for the upload progress key in $_SESSION
; Default Value: "upload_progress_"
; Development Value: "upload_progress_"
; Production Value: "upload_progress_"
; http://php.net/session.upload-progress.prefix
;session.upload_progress.prefix = "upload_progress_"
; The index name (concatenated with the prefix) in $_SESSION
; containing the upload progress information
; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
; http://php.net/session.upload-progress.name
;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
; How frequently the upload progress should be updated.
; Given either in percentages (per-file), or in bytes
; Default Value: "1%"
; Development Value: "1%"
; Production Value: "1%"
; http://php.net/session.upload-progress.freq
;session.upload_progress.freq = "1%"
; The minimum delay between updates, in seconds
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.upload-progress.min-freq
;session.upload_progress.min_freq = "1"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1
; Specify client character set.
; If empty or not set the client charset from freetds.conf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"
[Assertion]
; Assert(expr); active by default.
; http://php.net/assert.active
;assert.active = On
; Issue a PHP warning for each failed assertion.
; http://php.net/assert.warning
;assert.warning = On
; Don't bail out by default.
; http://php.net/assert.bail
;assert.bail = Off
; User-function to be called if an assertion fails.
; http://php.net/assert.callback
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
; http://php.net/assert.quiet-eval
;assert.quiet_eval = 0
[COM]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
; http://php.net/com.typelib-file
;com.typelib_file =
; allow Distributed-COM calls
; http://php.net/com.allow-dcom
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
; http://php.net/com.autoregister-typelib
;com.autoregister_typelib = true
; register constants casesensitive
; http://php.net/com.autoregister-casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations
; http://php.net/com.autoregister-verbose
;com.autoregister_verbose = true
; The default character set code-page to use when passing strings to and from COM objects.
; Default: system ANSI code page
;com.code_page=
[mbstring]
; language for internal character representation.
; http://php.net/mbstring.language
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
; http://php.net/mbstring.internal-encoding
;mbstring.internal_encoding = EUC-JP
; http input encoding.
; http://php.net/mbstring.http-input
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
; http://php.net/mbstring.http-output
;mbstring.http_output = SJIS
; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
; http://php.net/mbstring.encoding-translation
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
; http://php.net/mbstring.detect-order
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
; http://php.net/mbstring.substitute-character
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
; http://php.net/mbstring.func-overload
;mbstring.func_overload = 0
; enable strict encoding detection.
;mbstring.strict_detection = Off
; This directive specifies the regex pattern of content types for which mb_output_handler()
; is activated.
; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
;mbstring.http_output_conv_mimetype=
[gd]
; Tell the jpeg decode to ignore warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
; http://php.net/gd.jpeg-ignore-warning
;gd.jpeg_ignore_warning = 0
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settingsHi, everything in the "Quick Reference" section should be commented out with ;
You should change those settings further down in the php.ini file.
Example:
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
display_errors = Off
Last edited by adrianx (2013-07-26 12:32:02) -
Syntax error in program SAPLRRK0 - while running query in Bex/Portal
Hi all,
we just transported all the objects from dev to QA and data is loaded and everything went good. We are SPS9 and front end patch 903
Now I am trying to run queries on Bex analyzer and portal and I am getting this error.
"Syntax error in program SAPLRRK0."
Also on portal I am getting these extra messages
Error while executing function module: BICS_PROV_SUBMIT_VARIABLES
Error while executing function module: BICS_PROV_OPEN
I am researching but any input is appreciated.
Thanks,
KiranThanks Prakash,
I understand the pre-requisite notes issue but when we are moving like 50 notes from BW Dev to BW QA i am not sure how it works. I overheard the basis guy saying he is going to appy notes as per time stamp they were applied in BW Dev system. I will check on that though.
I have applied notes 969330, 969772, 977912,978359, 981814, 987135 in last 2 weeks. (which probaly are some how related to the issue). We have also applied some BI-Java notes in Portal Dev which are not transported to Portal QA.
Thanks,
Kiran
Maybe you are looking for
-
Internal links (cross-references) do not direct to the correct location
I am creating a glossary in Word 2003 that I would like to convert into PDF. I stored each entry as a bookmark (header) in Word, and many links throughout the document redirect to these bookmarked articles. When I convert to PDF (using Acrobat 8 Pro)
-
Importing cr2 raw files won't work on ios 6 when it worked fine on ios5. Anyone have a solution?
I have been importing cr2 raw files to my iPad using ios 5 but importing cr2 raw files won't work on ios 6. Sees files in camera but when import stops it fails with an exclamation mark in red circle. Anyone have a solution?
-
hi! i have a strange problem. if i read from mysql ( datatype TEXT ) and write it into a textarea ( html ), there are a tab and two blanks inserted before the text?! if i store again, they add up to two tabs and four blanks.....ect. but if i take the
-
Hello. Does anybody knows, how can i implement ws security with jax-ws? I know i can do it with axis 2, but i dont know if i can do it only with jax-ws. Thanks in advance.
-
Is there a way, in Pages, to switch to a "Web Layout" view like Microsoft Word's?