ECC 6.0 SPRO has several notes related to BI performance setting
On my ECC 6.0 instance there are several nodes related to BI performance. After reading through the notes attached to the node and the reference SAP notes, I am perplexed by the setting and what is considered required or good to have.
Is there a note or some kind of document that could help provide a technical basis for the parameters setting.
Under Performance Setting-->
-Quantity Conversion: Set Buffer Size
-Maintain Runtime Parameters of DataStore Objects
-Settings for InfoSets
-Settings for Database Interfaces
-Settings for Database Interfaces (Oracle)
-Parameters for Aggregates
-Global Cache Settings
-Settings for Analysis Processes
Anyone have any thoughts on changing these parameters to better performance betweer or ECC and BW instances.
Thanks
Weyland Yutani
Hi Weyland,
a good starting point for BI Performance is the following SDN site:
Performance Reporting in BW [original link is broken]
See also these useful SAP Notes:
892513 - Consulting: Performance: Loading data, no of pkg, r
409641 - Examples of packet size dependency on ROIDOCPRMS
417307 - Extractor package size: Collective note for applications
857998 - Number range buffering for DIM IDs and SIDs
Rgds,
Colum
Similar Messages
-
My brother-in-law was killed at work about 2 months ago. His wife has several voicemails from him on her iPhone 3GS is there any way to save those voicemails as a sound file? Preferably not using a handheld recorder. Any help would be greatly appreciated!
I offer my condolences, and this: Save Voicemails
I have not used it but the manufacturer claims it will do what you want. -
My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
Installation of Yosemite 10.10.1 has severely slowed performance of my Mac Mini. Tales a long time to start, and a very long time to start any apps.
Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
How to fix a looping desktop NOT related to Stuffit?
This very similar to another thread but I feel it's NOT related to it.
At first I thought it was related until I got further into the solution. I did download the 2008-08 security update as well as QT 7.6. That's when I think the problem started. The difference being that after xx iterations, the desk top would appear and work OK. If the computer sat idle for 3 - 4 hours (not likely due to our work load) it would loop again once I woke it up. It always happens sitting overnight. The problem is now approaching 2 weeks of acting this way. I didn't have any of the other symptoms like folder closing, applications quitting, etc.
I thought after looking for this AVR file I realized that I don't have Stuffit anywhere in my system. So that fix would not do me any good. I surmised that it might be a start up item in system preferences under users so I started bypassing them one at a time until I only had one left. That one was bypassed last night and made the loop count the highest ever at 84. Today, I noticed after removing (un-checking) all the start up items, one kept being executed (the opening a of a .dmg file).
It's tough to test if the fixes cure the problem because I have to wait 3 - 4 hours before it will fail. Usually I just wait overnight because our G-5 is in constant us with two of using it to get actual work accomplished.
This morning I thought it would never start but after 84 loops it broke out. Before it finally breaks out, the next to last loop stays up for 30 seconds giving you the false hope that it is over then it goes one more time and it's up and running. And another interesting thing is that if I can't wait for it to finish looping, I do a reboot and all is well and it starts up normally.
I have run Tech Tools Pro on all drives and they are all OK. Ran diagnostics on all components of the system hardware and all were OK. I even ran disk repair and permissions on all drives and all OK.
Any other suggestions, observations or sources I can go to would be very helpful. My Apple care ran out a year ago so I can't go there.
Thanks for responding,
AlThanks for the rapid response! This morning it took 89 loops to wake up. The number is growing.
*+Also look in these if they exist, some are invisible...+*
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
I did the above from your previous post and found nothing. BTW how do you look for an invisible file?
Back under system 9 when the computer was doing things like this, we just rebuilt the desk top and it went away. Now I'm not as up to speed on os x so do we need to rebuild the desktop from time to time and if so how does one go about doing this?
This morning, all of the startup items that I hid in systems preference/accounts appeared to work correctly as the .dmg did not open and did not appear on the desk top.
Another anomaly happening is from time to time I lose an icon (shows icon as a ?) in the tool bar but the application still works and restores the icon when you click on it.
I think I might have accomplished the same thing as safe boot by bringing up Tech Tools Pro from their emergency drive. After I did that I ran disk utility repair disk and repair permissions on all of my hard drives and it didn't find anything. All hard drives have been optimized last week.
My frustration is that it takes 3 - 4 hours for it to do the looping. Tonight, I will do the safe boot and see what happens in the morning. When operating under safe boot will I see my regular desk top with folders and files?
Now moving on. Is it possible and if so, how would I back out the recent security update and the QT update to see if that corrects the looping. Would going to os 10.5.6 fix this problem? I would like to stay with my current operating system. I realize that Apple has its' resources working on upgrading the 10.5 system and maybe things will get worse for us that are on os 10.4.x and wish to stay there.
I appreciate your support and that of others on this forum for without you, there would be no place to turn as Apple seems to be unreachable unless you have Apple Care.
Have a great day on this Super Bowl Sunday!
Al -
Link to Document Content Type issue - links not relative
I'm using the Link to Document content type in a library in order to link to documents in other libraries. We just migrated to 2010 from WSS 3.0 (2007) and are having an issue. We view our site internally thorough the internal machine address/name
and also have users connecting remotely from an external url. In 2007, it didn't matter whether we were internal or external, all links were apparently stored as relative because the "link to document" items worked fine either way. This
was despite entering the url fully and not relative. When viewing/editing the properties of that item, it shows you the full url applicable to where you are viewing it...internal if internal, external if external.
However, after the migration to 2010, all links that existed previously are fine, but any new items created using link to document apparently no longer store them as relative so either the internal or external users get the wrong link. For example,
if I put in the link as http://servername/library/doc the external users get that same link and it doesn't work, since it should be like https://myurl/library/doc. Viewing/editing the properties of the item shows an absolute url of whatever location
the item was added. For instance if I'm connected externally and add an item, even if i only enter it as relative, it creates the link as https://myurl/library/doc and then the internal users end up having to connect via that url and that is just a pain
due to AD and certificate issues. The internally created links are obviously not accessible at all from the outside.
I've also tried storing the link as relative when creating the item but it seems to overwrite it with the absolute link.
This is causing quite an issue with us. Does anyone have any insight as to what is going on and how to fix it?
thanks!Hmm...I thought I had the thread set to email me if there were replies and I never received an email so I thought there were no replies. I came back to this since another issue cropped up that is related and there were replies!
I cannot recall how things were set up exactly in 2007 and there's no way to look back now. I'm a novice when it comes to AAM/DNS/IIS really. Maybe you can suggest what it should look like?
We have our site which is accessed internally by http://machinename . Externally, we use https://sharepoint.mydomain.com .
In AAM we have http://machinename listed in the default zone with the same url for internal and public. We also have https://sharepoint.mydomain.com listed, in the internet zone and it also has the same url for both internal and public.
In IIS, the sharepoint site has bindings for port 80 and 443, but nothing specific to https://sharepoint.mydomain.com
DNS....I'm not sure what should be here, if anything.
We can access the site just fine externally, there are just a few instances where some links do not work correctly and point to the internal url instead of external when you are external. The original post is one time and the other, found the other
day, is a search box webpart that points to a relative url for the results page but externally it ends up going to the internal url.
I'd appreciate any guidance. Thanks! -
IPhoto opens spontaneously; not related to plugging in iPad or iPhone
I've researched the archives and similar questions have been answered but mine's a bit different. iPhoto, which I never use, has started opening everytime I wake the computer and sometimes spontaneously while I'm working on my iMac. Not related to plugging in my iPad or iPhone; it just started happening randomly about a week ago. It's annoying, particularly since I rarely, if ever, use iPhoto.
Thank you.Any FAT formatted storage devices connected to your Mac?
LN -
My iphone has several tiny messages across the top of the screen & will only show the screen with the apple in the center. Has anyone else had this problem?
Hi jarakay,
Thanks for visiting Apple Support Communities.
It sounds like your iPhone may be in recovery mode. If you have not already, try resetting the device:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the phone does not start normally after a reset, use the steps in this article to restore it:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Regards,
Jeremy -
I purchased Adobe Elements Photoshop 12 & Premiere 12 together from a camera shop in town. When I tried to use the Premiere, it splashed "created with the trial version" over all of the photos. How can this unsightly watermark be removed. It has severely hampered my timeline to start and finish this project. Why would a purchase software product purport to be a "trial" version?
This indicator will appear when you have not registered your product or typed in the serial number for the product.
Once you've added the serial number, any future products will not display this indicator.
To remove this this indicator from videos created before you added the serial number, you'll need to delete the rendered files. -
Selecting from two tables and confirming from them despites they not relate
Please I need a query to select from two tables that are not related to each other.
I also want to confirm data's as in verify wether what the user has entered is in accordance with what is in the tables
Examples
the first table is named "Card" and the second table is named "Student_Details"
Card table contains a column named "Pin_Number".
The Student_Details table contains fields such as Exam_Number, Name, Age, Sex.
The user has to Enter the Pin_Number which has to be confirmed in the Card table and Exam_Number which has to be confirmed in the Student_Details table and verify that both data's are correct.
Please I need the SQL and PL/SQL queries for this problem.
ThanksHi,
I think you need two different queries
You can write a procedure like:
create or replace procedure p1 (p_pin_number number, p_exam_number)
is
r_card_row card%rowtype;
r_student_details student_details%rowtype;
cursor c1 is
select *
from card
where pin_number = p_pin_number;
cursor c2 is
select *
from student_details
where exam_number = p_exam_number;
begin
open c1;
loop
fetch c1 into r_card_row;
exit when c1%notfound;
.... do whatever you want..... and the samething you can do with other cursor
end loop;
close c1;
end p1;Hope this helps
Ghulam -
Join 2 tables which are not related with any primary-foriegn key constraint
Hello,
How to join 2 tables which are not related with any primary key foreign key constraint.
Ex.Consider Table A has 5 columns->A_ID,A_Name,A_Address,A_City,A_Pin(Total 10 rows)
Table B has 5 columns->B_ID,B_Name,B_Adress,B_City,B_City(Total 30 rows)
From both the table i want the data,which i need to use in curosr to display finally as "Address Label".
Both the table are entirely different,but there can be some names of Table A which may come in Table B also,if the name,address and city is also same.That means same person in both the table.
So finally i want total number of distinct records(distinct data of Table A which is not in B+all the data of table B) to come under Address Label.
How can i write the select query for this condition?
Thanks
SwapnaHi, Swapna,
user11018268 wrote:
Hello,
How to join 2 tables which are not related with any primary key foreign key constraint.
Ex.Consider Table A has 5 columns->A_ID,A_Name,A_Address,A_City,A_Pin(Total 10 rows)
Table B has 5 columns->B_ID,B_Name,B_Adress,B_City,B_City(Total 30 rows)
Both the table are entirely different,but there can be some names of Table A which may come in Table B also,if the name,address and city is also same.That means same person in both the table.I think you want a UNION, not a join.
If you have 10 rows in table_a, and 30 rows in table_b, then
SELECT A_ID, A_Name, A_Address, A_City, A_Pin
FROM table_a
UNION
SELECT B_ID, B_Name, B_Adress, B_City, B_City
FROM table_b
ORDER BY 2, 4
;will produce up to 40 rows; 40 if there are no duplicates. (UNION implies DISTINCT.)
The corresponding column types should be similar, if not exactly the same.
There's no problem if A_Name is VARCHAR2 (50) and B_Name is CHAR (30).
However, there will be a problem if A_ID is a NUMBER and B_ID is a TIMESTAMP.
You must have the same number of columns in all branches of the UNION.
If you want an ORDER BY clause, put it at the very end, after the last branch of the UNION.
You can use positional notation (where 2 means the 2nd column) like I did, or you can use names from the first prong of the UNION (such as A_Name).
From both the table i want the data,which i need to use in curosr to display finally as "Address Label".
So finally i want total number of distinct records(distinct data of Table A which is not in B+all the data of table B) to come under Address Label.I'm not sure what your mean about "Address Label".
Whenever you have a question, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables, and the exact results (formatted) that you want from that data.
You can concatenate all 5 columns into one VARCHAR2 column, if you want to.
You'll probably want to use RPAD (or simillar functions) to make the output line up nicely.
If any of the columns are not strings, use TO_CHAR to make string versions of them.
For example:
SELECT TO_CHAR (A_ID, '9999999')
|| ' ' -- leave a little space between the left-justified a_id and the right-justified a_name
|| RPAD (A_Name, 25)
|| RPAD (A_Address, 50)
...Edited by: Frank Kulash on Nov 14, 2009 10:11 AM -
ADT error "File [file] is not relative to directory [output]"
Has anybody come accross this error before when adding files to include to via ADT?
For example:
adt -package -target ipa-test -storetype pkcs12 -keystore my.p12 -storepass mypass
-provisioning-profile my.mobileprovision my.ipa my-app.xml
my.swf icons Default.png "../../../resources/fonts/FutuBd_.ttf"
In this case I am trying to include a file in the archive that is relative to the output directory.
My output directory is:
c:\projects\game\repo\bin\ios\
My font is in:
c:\projects\game\resources\fonts\FutuBd_.ttf
However I get the error:
File ../../../resources/fonts/FutuBd_.ttf is not relative to directory c:\projects\game\resources\fonts\FutuBd_ttf
But it actually is!
Anybody have any idea?Yeah, sorry Colin, that is indeed what happens (CD first to swf folder). That isn't the exact command line either - I cobbled it as an example. The main point is that at works absolutely fine without including external files (generates an IPA etc), but as soon as I do include files (other than icons or Default.png etc), it doesn't work anymore. Some more info:
- If the files are in the same folder as the swf, and included without a path (filename only) it works fine
- If there is a relative path that is incorrect (i.e. there is no such file), the error is different (file does not exist)
- However, if the relative path is correct (there is a file there) the error is as above
- Quotes or no quotes makes no difference (quotes are there for the 'space in file path' problem) -
SAP note related to QA08 transaction
Hi all,
I am trying to activate inspection type using QA08 Transaction (for which we have written a BDC). The program runs successfully but the client says there is an internal error due to which the subsequent transactions are affected.
We are pretty sure that our program has no bugs.
Can anybody let me know are there any SAP Notes related to this Transaction.
Thankyou in advance,
LakshmiHi,
Use follwonig transactions
OSS1 / SNOTES.
You can always go to http://service.sap.com/
and search for notes.
Regards,
Shashank -
CLIENT 600 HAS STATUS NOT MODIFIABLE
Hi SDN,
I gotone problem related to SM30.While user trying to upload the table he will get the message like <b>CLIENT 600 HAS STATUS NOT MODIFIABLE</b>. Could you please provide me the solution and reason for this message? I will be very great ful and thank ful for the answers..
Appreciation for the answers..
Regards,
KumarHi,
This thread has answer to your question...check it out...
How do SM30 Update when client is "not modifiable" ?
assign points if helpful... -
OBB8 - Client clientnum has status "not midifiable".
Dear All,
I have given atuhorization of OBB8. But when user try to run OBB8, it gives Client <clientnum> has status "not midifiable".
Our requirement is to Maintain Terms of Payment directly into production.
Please advice below steps will work and is it advisable or not ?
1. In SPRO -> Financial Accounting->Accounts Receivable and Accounts Payables-
->Business Transactions->Incomming Invoices/Credit Memo -> Maintain Terms of Payment.
In Mainain Object if I check the "Current Setting" - will it work.
If try to check the "Current Setting" it will ask for Access key as object is going to modified ?
Whether this object "V_T052" is advisable to modify ?
Thanks in advance
Nirav
Thanks in advance
NiravVinaya Reddy wrote:Hi
>
> Yes i agree....to maintain SAP standard tables, you need to ask the basis guys to open the client and then modify the table.
Yes this will do the trick to, but I would advise against it.
Customizing tables should always be maintained in your development system an transported to production, don't open production for customizing, if you do so you can't ensure that the OBB8 table is the only customizing table that's changed in production - and overtime you will probably find your self in a situation where you have forgotten to close the productive client again, and that other types of customizing has been changed directly in you productive system as well. This can potentially endanger the stability and security of your system landscape.
If you want to maintain it directly in production - change the recording routine on this table only in SE54. It's a change to SAP Standard, (and of course you should avoid changing the standard if it is practically possible) but you will keep the control of your landscape.
And in my book it a bigger Sin to open your productive system for customizing, than it is to change this kind of SAP Standard settings - but that's just my opinion.
Regards
Morten Nielsen
Maybe you are looking for
-
THOGHT I HAD DONE THIS. FOR A WHILE I HAVE BEEN GETTING AN ERROR WINDOW POP UP WHEN TRYING TO UIPDATE SOFTWARE OR DOWNLOAD PDF FILES ETC. ERROR MESSAGE READS CANT SAVE AT THIS LOCATION ( USERS/DESKTOP/ ETC ) TRY SAVING TO A DIFFERENT LOCATION. I DO N
-
I have been with Verizon for 15 years. I have a family share plan with 2 smart phones a standard phone and a jetpack for wireless access. I pay for insurance on the 2 smartphones. Approximately a year ago I made a payment arrangement to continue serv
-
File Sender Adapter - Throw Alerts
Hi experts, I've custom a communication channel for the file sender adapter and I'd like to raise alerts in case of technical errors and functional. I managed to do this for functional errors, by alert rules, and runs good. But for technical errors,
-
Help with tables for frustrated newbie
Could someone look at the starters of a site I'm trying to get up and going? The link is here: http://canyoncrestfoundation.org/newhomepage.htm The site is a table with five rows. I would like to be able to use the basic design on other pages, and ch
-
Hoping for detailed help w/ Podcast/Zen Micro/ Windows Media 10.
Can someone please outline what steps are necessary for someone with a 5gig Zen Micro & Windows Media 0 to download (specifically) and eventually listen to podcasts on my Zen Micro. I'm hoping for something like; You need these 3 things.....first you