ECC 6.0 Upgrade from R/3 4.6B - Obsolete ABAP Language

Hello all,
I am part of a team that is performing an upgrade to ECC 6.0 from R/3 4.6B. I was wondering if all of the reports, FM, etc. that were developed under "old" ABAP will have to be modified in order to comply with the  <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca">Obsolete ABAP Language Constructs</a>.
If the code still works after the upgrade is it necessary to perform all these modifications?
Thank you very much in advance,
Best Regards,
Ezequiel

I would say that is is not necessary.  From the second paragraph of your link:
"Although you are generally not forced to modify your existing programs to represent these changes, it would be a very good practice to implement these rules and constructs with any new code development and coding samples."

Similar Messages

  • Is it possible for XI 2.0 to connect to ECC 6.0 upgraded from SAP R/3 4.6?

    Hi,
    I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
    If yes, could you forward some links so as to know how.
    Thanks,
    Fariha

    hi,
    >>>>Is that Possible..?
    yes
    >>>Wont there be any additional configuration needed ?
    if you use IDOCs then you don't need anything special
    Regards,
    michal

  • Hardware requariment for ECC 6.0 upgrade from ECC 5.0

    Hello
    I am on ECC 5.0 with oracle 9.2.0.7.I need to upgrade this to ECC 6.0.
    I have already implemented MM,PP,FICO,QM and HCM.My current data base size is 900GB.This has 30GB monthly growth.
    With this ECC 6.0 upgrade i am planing to implement PM,EP.
    I know converting none Unicode system to unicode system is required some more hardware resources than the none Unicode.
    Some document says 40-60% more disk space and 35% more processing speed from current system.
    Can any one give me the correct information about the hardware requirement for ECC 5.0 to ECC 6.0 upgrade.
    Thanks
    Roshantha

    Check with the Links
    https://websmp102.sap-ag.de/sizing
    https://websmp208.sap-ag.de/quicksizer
    http://www.4soi.de/
    http://www.easymarketplace.de/
    Kanagaraja L

  • Impact on BI after ECC 6.0 Upgrade from Ehp 3 to Ehp 4

    Hi All,
    We are planning for an upgrade of our ECC 6.0 System from Ehp 3 to Ehp 4.
    Could you please provide me inputs in what needs to considered in terms of BI system?
    I know the following thing:
    1) Delta Queues must be cleared before the upgrade starts but what needs to be considered for FI and CO Data Sources.
    Any SAP Documentation available?
    Thanks,
    Neelesh

    What version of BI is yours...3.5 or 7.0???
    Unless the ehp4 is bringing some functional changes to FI or other functional datasources which needs to be replicated on to the BI side.
    i think the below link might help.
    Technical news brought with EHP3 and EHP4 compared to ECC6
    Thanks
    Deepak

  • ECC 6.0 Upgrade from 4.7 - EDI Interfaces

    Hi Gurus,
    Need your inputs on what are the precautions to be taken during ECC 6.0 Upgrade related to EDI Interfaces.  with SAP upgrading from 4.7 to ECC 6.0, do you see any precautions need to be taken considering the middle ware involvement.  Also, is there any changes in IDOC Structures in ECC 6.0 which my cause issues related mapping with middleware.
    Please suggest.
    Thanks & Regards,
    C.L. Narasimhan "CLN"

    Hi,
    generally, a release upgrade, delivers new idoc/message types or new releases of existing idoc/message types.
    So, taking this in mind, you shouldn't have problems for the mapping of the messages, because the versions of the basic idoc, once released, cannot be changed.
    You might have some application problems related to the inbound interfaces, but this is part of the game...the testing phase will highlight whether the problem exists.
    A known problem is that the upgrade removes all the customer specific entries in the system table EDIFCT.
    Further details are provided in the OSS note [https://service.sap.com/sap/support/notes/865142]
    Regards,
    Andrea

  • Screens not working in ECC 6 after upgradation from 4.6c.

    Hi,
    The custom developed screens which where developed in 4.6c version is not working properly in ECC 6 after upgradation.Do i have to make any more changes for this .? If anyone have an idea please help me in this issue.The custom developed things are an extended functionality we have done to r/3.
    Regards,
    jinesh kumar c.

    Hi,
    Check the Transportatation Logs in STMS for the programs/screens and check whether they are successfully tranported or not?
    Because some times we get Dynpro errors for transportation of the screens.
    Reward if useful.
    regards,
    Anji

  • IM (Inventory material) is failing in ECC 6.0 upgrade from SAP R/3 4.7

    Hello,
    We are working on Technical upgrade project (SAP R/3 4.7 to ECC 6.0 EHP 6) for one of our Client.
    when we are trying to create a purchase order (ME21N) in upgraded system (ECC 6.0), the field  IM Material is failing to accept the internal material values from MATNR field. After entering the IM material, the value immediately got disappeared and it needs some workaround to get the material back in to the IM field along with MPN material.
    It was working fine (accepting Internal material) in R/3 4.7, if we give a valid internal material, it immediately get copies to the field IM Material.
    In case of ECC 6.0, it is completely failing.
    Please suggest if you have come across any solution?
    Regards
    Rifaie

    Hi Selvan,
    Go through document in below thread,you will get more info on upgrade
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/sapERP6.0+Upgrade%2520%2520SAP%2520ERP%25206.0%2520Upgrade
    Faq's on SAP upgrade in below link,
    SAP ERP 6.0 Upgrade
    Thanks Regards,
    Syfulla

  • Webgui service fails in ECC 6/0 upgraded from ECC 5.0.

    Our webgui service worked fine in our ECC. 5.0 system, however after the upgrade to ECC 6.0, the WebGui service fails. Has anyone experienced this?  I've found other threads that said to change the WebGui service parameters, however, I'm not sure what the correct parameters are since the one's I have are from a ECC.5.0 system and not from and ECC 6.0 system.

    Problem resolved...you need to publish the service "SYSTEM" and "WEBGUI" in se80 after a SP upgrade.

  • ECC 6.0 Upgrade from R/3 4.7

    Hi:
    we recently upgraded our sandbox from R/3 4.7x110 enterprise to ECC6.0, after the upgrade was completed we had to restore the system from backup tape. after restore license information was lost, so I loaded the saplicense from the command line, license was loaded, but now when I try to login to system it says 'Login not possible, error in license check'
    We use oracle 10g on Sun Solaris 10 platform.
    If anybody has encountered this problem, please let me know.
    Thanks

    Hi Jacob:
    I checked the message server port, entry is ok with 3600, I did a trace on saplicense check and here is the output. Funny thing is it was working before and I did not change anything except loading the licenese, also I can login using sap* but no server list in SM51.
    glsapsbx:dsbadm 9% more dev_slic
    trc file: "dev_slic", trc level: 3, release: "700"
    Test license for SAP SYSTEM:   DSB
    rdisp/mshost: glsapsbx
    rdisp/msserv: sapmsDSB
    MsIAttachEx: connect to glsapsbx / sapmsDSB
    NiIInit: allocated nitab (2048 at 100429c30)
    NiHsLInit: alloc host/serv bufs (100/100 entries)
    NiPGetNodeAddrList: got 2 interface(s) from operating system
                    [ 0-lo0     ] IPv4-Address: 127.0.0.1 UP
                    [ 1-ce1     ] IPv4-Address: 10.47.14.140 UP
    NiHsLGetNodeAddr: got hostname 'glsapsbx' from operation system
    HN='glsapsbx'; Ali[0]='loghost'; Ali[1]='loghost'; Ali[2]='glsapsbx.mwrd.org'; Add[0]=10.47.14.140;
    Add[1]=10.47.14.140
    NiIGetNodeAddr: hostname 'glsapsbx' = addr 10.47.14.140
    NiHsLGetServNo: got service name 'sapmsDSB' from operation system
    SN='sapmsDSB'; Port=0E.10/3600; PC=tcp
    NiIGetServNo: servicename 'sapmsDSB' = port 0E.10/3600
    NiICreateHandle: hdl 0 state NI_INITIAL
    NiILocalCheck: matched local address: 10.47.14.140 (up)
    NiIInitSocket: set default settings for new hdl 0 / sock 5 (UD; ST)
    NiIBlockMode: set blockmode for hdl 0 FALSE
    NiITraceByteOrder: CPU byte order: big endian, network, high val..low val
    NiIConnectSocket: hdl 0 is connecting to /tmp/.sapstream3600 (timeout=5000)
    NiHsLGetHostName: found address 10.47.14.140 in cache
    NiIGetHostName: addr 10.47.14.140 = hostname 'glsapsbx'
    NiHsLGetServName: found port number 0E.10/3600 in cache
    NiIGetServName: port 0E.10/3600 = servicename 'sapmsDSB'
    NiIInitSocket: set default settings for new hdl 0 / sock 5 (I4; ST)
    NiIBlockMode: set blockmode for hdl 0 FALSE
    NiIConnectSocket: hdl 0 is connecting to 10.47.14.140:3600 (timeout=5000)
    NiHsLGetHostName: found address 10.47.14.140 in cache
    NiIGetHostName: addr 10.47.14.140 = hostname 'glsapsbx'
    NiHsLGetServName: found port number 0E.10/3600 in cache
    NiIGetServName: port 0E.10/3600 = servicename 'sapmsDSB'
    ***LOG Q0I=> NiPConnect: connect (146: Connection refused) [nixxi.cpp 2513]
    ERROR => NiPConnect: SiConnect failed for hdl 0 / sock 5
        (SI_ECONN_REFUSE/146; I4; ST; 10.47.14.140:3600) [nixxi.cpp    2513]
    NiICloseHandle: closing initial hdl 0
    ERROR => MsIAttachEx: NiBufConnect to glsapsbx/sapmsDSB failed (rc=NIECONN_REFUSED) [msxxi.c   
      652]
    Can't connect to message server (NIECONN_REFUSED)
    Thanks

  • Upgrade from ECC 6.0 to NW 7.10

    Hi,
    I'm trying to plan ahead for our upcoming hardware replacement (3 yr lease). We are also planning for an ECC 6.0 upgrade from 4.7 Enterprise (unicode). I know that the power 6 chip has a built in decimal floating point processing which I believe will be useable with Netweaver 7.10.
    Is the upgrade from ECC 6.0(a NW7.00 product?) to NW 7.10 a full upgrade or is it more like a big hot pack? 
    The reason I'm interested is that I would like to think I could take advantage of the Decimal Floating point processor sooner than later. The other part of the equation is that we have a BI based on NW 7.00 now.
    If I can avoid purchasing another i5OS and paying for a processor activation because there is now a math feature built into the processor , I'm all for it. I would like to start planning now if the upgrade to 7.10  isn't going  to be too painful.

    Hi Craig,
    From what I heard, there would not be another major ECC release in the near future. New functions have been and will be released in "Enhancement packages" - hopefully it is not another new term to you...
    NetWeaver 7.1 has been released (Q3 2007? not Q3 2008 for sure). BI folks might know whether there will be a release 7.1 or not.
    Best regards,
    Victor

  • SAP ECC upgrade from EHP6 to EHP7

    Is  GTS upgrade from NW 7.2 to GTS  7.3  to be mandated as ECC is getting upgraded from  ECC 6.0 EHP6 to  EHP 7 .  Why?

    Hi John,
    Your statement looks a bit misaligned.. There is no GTS 7.3 version, the SAP Netweaver 7.3* application server on which SLL_LEG GTS component sits.
    The underlying Netweaver AS versions between ECC and GTS systems can be different BUT what needs to be the same is the GTS plugin component in ECC and GTS components in GTS system itself, as best practice they should also be on the same support pack level.
    If the ECC upgrade from ehp6 to ehp7 requires you to upgrade SLL_PI gts plugin component in ECC, then in this case you should upgrade SLL_LEG component in GTS system to the same version.
    I personaly dont think its required, but check Service markeplace for, PAM Product-availability-matrix and other ehp 7 requirements..
    Hope this helps,
    Branio

  • Upgradation from 4.6C to ECC6.0

    Hi all,
    My client wants to upgrade the version from 4.6 to ECC6.0.
    As a Functional consultant (FICO) what areas i learn additionally?
    and what is the customization needs for that? i worked on 4.6 & 4.7 versions only.
    If anybody having the customization & what to do's and not kindly send the configuration doc's.
    what activities i have to do before starting this upgrade?
    Give me an idea that drives me for a good achievement. points assured.
    Thanks and Regards,
    Soma

    Dear Devaselvam,
    Following threads will be informative:
    Upgrade from 4.6c to ECC 6.0
    Upgrade from 4.6c to ECC 6.0
    Upgradation from 4.6C to ECC 6.0 (Naveen's post)
    Also, you may visit:
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Here, select:
    Source Release Version: SAP R/3 4.6C
    Tareget Release Version: SAP ECC 6.0
    Solution Area: Sales and Service (or as reqd.)
    Module: SD/LES (or as reqd.)
    and Click: Search.
    It will list-out the Release Version and the Delta Functionality, which can be downloaded to a word document, if required.
    Hope, these information will help you, in your technical upgradation.
    Very Best Regards,
    Amit
    Also check the release notes of ECC 6.0 on to http://service.sap.com

  • Obsolete ABAP Statements from 2004s - what about your existing code-base?

    Hi
    Note:  This is a question for someone that has a very deep understanding of the SAP compiler either through research or through actually working on the Netweaver Code stack
    Since upgrading from 4.7 to ECC6 the ABAP compiler has become a lot stricter on the use of certain statements in the OO context.
    For instance you're not allowed to use the statement LIKE, but in stead have to use TYPE and internal tables does not have an implicit header line, etc.
    These restrictions are explained in greater detail [here:|http://help.sap.com/abapdocu/en/ABENABAP_OBJECTS_DIFF_TYPES_DATA.htm]
    MY QUESTION:  To what extent does this restriction affect your existing code-base?. 
    We have over a thousand "Classes" written since 1998 in OO as far as it was available at the time.  For the most part each class is its own include in SE38, with the class definition and implementation together in this include.
    Up to now, we could successfully change and activate these classes as long as the main program was pre-existing in 4.7.  Now we are trying to use one of these older classes in a new main program for regression test purposes, and we are getting the following error: 
    "Within classes and interfaces, you can only use "TYPE" to refer to ABAP Dictionary types (not "LIKE" or "STRUCTURE")."
    This error is valid as per the current definition of the SAP language.
    BUT I'm concerned about the confidence we can have that SAP will continue to interpret and execute existing code correctly.  So far it has, but I would like to know wheter that is by chance, or by design.

    Hello Esti
    Thank you for your explanation which shows that I misunderstood your question.
    I would have expected that all of your syntactically incorrect coding would not be executed, irrespective of whether it is an old or a new program. My interpretation of this system behaviour is that the syntax check appears to be release-dependent.
    A possible way to check this would be to manipulate the TRDIR entry for one of your old programs. You will find a field LEVL with the following meaning:
    DE RDIR_LEVL
    Short Text
         Level
    Definition
         System release under which the ABAP/4 program was created or last
         changed.
    Another way would be to copy an old program to a new Z-program which should fail in the syntax check. Check again if you find any significant difference in their TRDIR entries.
    Coming back to you question and the remark by Dion I am convinced that one of the biggest threats for each and every SAP customer is custom coding of poor quality, i.e.
    "spaghetti" coding instead of structured programming
    incomprehensible coding (at least for the developers who did NOT create the program)
    low transparency resulting in high efforts to enhance or improve the coding
    In your case: the possible breakdown of your coding depending on unknown external factors
    Given the huge amount of coding that is affected from these unknown external factors I would classify your situation as "high risk" which demands rather quick actions. How could you communicate this to your management team?
    Here are two possible suggestions:
    (1) It is possible that your entire custom coding may be no longer executable after a SAP release upgrade. Thus, the currenct coding base may prevent one of the next upgrades.
    I guess this is not yet impressive enough for a manager because usually a SAP customer is not forced to upgrade its SAP system in order to get new functionalities which are required for legal reasons.
    (1.a) It is possible that your entire custom coding may no longer be executable after importing ABA and/or BASIS hot packages.
    Given the fact that we need to import such packages quite frequently and sometimes they are mandatory (I think especially of SAP-HR systems) then I would be scared as a manager.
    (2) Assuming that most of your Z-reports are started via Z-transactions and perhaps you are lucky and you have specific roles containing these Z-transactions then you may ask your management team to do a simulation of coding breakdown: remove the role assignments for a couple of users and see what happens.
    (2.a) As an alternative you may try to lock Z-transactions via SM01 and again check for the user reactions.
    If your managment team is still not impressed then I would set up a document with the following contents:
    Explain the problems of the old coding base and why you could not anticipate future changes of the ABAP syntax check
    Describe the possible scenario if the custom coding no longer works after an upgrade or hot package import
    Describe the required actions to make your custom coding compatible to the latest ABAP release
    Most important: urge your management team to sign this document. If one day your custom coding breaks and they are looking for somebody to blame you just take this document out from the bottom of the deck
    Regards
      Uwe

  • Upgrade from R/3 4.6C to ECC 6.00 : languages

    Hi,
    We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
    The following language(s) could not be updated yet:
    - French       for component EA-APPL
    - French       for component EA-DFPS
    - French       for component EA-FINSERV
    - French       for component EA-GLTRADE
    - French       for component EA-HR
    - French       for component EA-IPPE
    - French       for component EA-PS
    - French       for component EA-RETAIL
    - French       for component ECC-DIMP
    - French       for component ERECRUIT
    - French       for component FI-CA
    - French       for component FI-CAX
    - French       for component FINBASIS
    - French       for component INSURANCE
    - French       for component IS-CWM
    - French       for component IS-H
    - French       for component IS-M
    - French       for component IS-OIL
    - French       for component IS-PS-CA
    - French       for component IS-UT
    - French       for component LSOFE
    - French       for component PI_BASIS
    - French       for component SAP_ABA
    - French       for component SAP_AP
    - French       for component SAP_APPL
    - French       for component SAP_BASIS
    - French       for component SAP_BW
    - French       for component SAP_HR
    - French       for component SEM-BW
    - French       for component ST-PI
    - Dutch        for component EA-APPL
    - Dutch        for component EA-DFPS
    - Dutch        for component EA-FINSERV
    - Dutch        for component EA-GLTRADE
    - Dutch        for component EA-HR
    - Dutch        for component EA-IPPE
    - Dutch        for component EA-PS
    - Dutch        for component EA-RETAIL
    - Dutch        for component ECC-DIMP
    - Dutch        for component ERECRUIT
    - Dutch        for component FI-CA
    - Dutch        for component FI-CAX
    - Dutch        for component FINBASIS
    - Dutch        for component INSURANCE
    - Dutch        for component IS-CWM
    - Dutch        for component IS-H
    - Dutch        for component IS-M
    - Dutch        for component IS-OIL
    - Dutch        for component IS-PS-CA
    - Dutch        for component IS-UT
    - Dutch        for component LSOFE
    - Dutch        for component PI_BASIS
    - Dutch        for component SAP_ABA
    - Dutch        for component SAP_AP
    - Dutch        for component SAP_APPL
    - Dutch        for component SAP_BASIS
    - Dutch        for component SAP_BW
    - Dutch        for component SAP_HR
    - Dutch        for component SEM-BW
    - Dutch        for component ST-PI
    Please mount another Language Disk for these language(s).
    If you do not have further Language Disk(s), you may
    continue, but the languages mentioned above will be lost
    after the upgrade. A full language import has to be
    performed after the upgrade to reinstall the language(s).
    ? continue
    ? cancel

    Hi Markus,
    I've introduce the following information:
    > MOUNT POINT 07 = S:\export\Data\CDLAN2
    > MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
    > MOUNT POINT 06 = S:\export\Data\CDLAN1
    > MOUNT POINT 05 = S:\export\Data\CD3
    > MOUNT POINT 03 = S:\export\Data\CD1
    > MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
    > MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
    > MOUNT POINT 04 = S:\export\Data\CD2
    And in mount point 06/07 we have the languages.
    The content of the trace file is:
    here's the complete trace:
    2007/07/05 16:35:01 *****************************
    2007/07/05 16:35:01 Checking directories ...
    2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
    Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
    2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
    Adding path: S:\export\Data\KN_WINDOWS_X86_64
    2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
    Adding path: S:\export\Data\CD1
    2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
    Adding path: S:\export\Data\CD1\UPG1
    Adding path: S:\export\Data\CD1\UPG2
    Adding path: S:\export\Data\CD1\UPG3
    Adding path: S:\export\Data\CD1\UPG4
    Adding path: S:\export\Data\CD1\UPG5
    Adding path: S:\export\Data\CD1\UPG6
    2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
    2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
    Adding path: S:\export\Data\CD2
    2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
    Adding path: S:\export\Data\CD2\UPG7
    Adding path: S:\export\Data\CD2\UPG8
    Adding path: S:\export\Data\CD2\UPG9
    Adding path: S:\export\Data\CD2\UPG10
    Adding path: S:\export\Data\CD2\UPG11
    Adding path: S:\export\Data\CD2\UPG12
    2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
    2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
    Adding path: S:\export\Data\CD3
    2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
    Adding path: S:\export\Data\CD3\UPG13
    Adding path: S:\export\Data\CD3\UPG14
    Adding path: S:\export\Data\CD3\UPG15
    Adding path: S:\export\Data\CD3\UPG16
    2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
    2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
    Adding path: S:\export\Data\CDLAN1
    2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
    Adding path: S:\export\Data\CDLAN1\LANG1
    Adding path: S:\export\Data\CDLAN1\LANG2
    Adding path: S:\export\Data\CDLAN1\LANG3
    Adding path: S:\export\Data\CDLAN1\LANG4
    2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
    2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
    Adding path: S:\export\Data\CDLAN2
    2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
    Adding path: S:\export\Data\CDLAN2\LANG5
    Adding path: S:\export\Data\CDLAN2\LANG6
    2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
    2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
    2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
    Adding path: S:\export\Data\UMN_WINDOWS_X86_64
    2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
    Regards,
    A.Kamel

  • Interview questions on upgrades from 4.7 to ECC

    Hi,
    Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
    Points will be awarded.
    Thanks

    Hi Frank,
      this is good question,  why because sap upgrades from 4.6b to ecc 6.0 is very risky.
      take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
       check the obsolete function modules ,  4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
      once you change the code in ecc , go to tranx : SLIN check the error where it is exact.

Maybe you are looking for

  • Intermittent Lock Timeout Exceptions with JE 5.0.58

    Hi, During tests, the system continues to experience Lock Timeout problems from time to time, even with the latest version 5.0.58. The collection contains data which is typically removed shortly after inserted, so records usually have a short lifetim

  • How Many Multi Folios with single Professional Edition?

    Hello how many multifolios can I create with single Professional Edition Subscription? for example, is it possible to create Magazine's English Edition (with weekly updates), Russian Edition (weekly updates) and etc....both of them shoud have differe

  • Logitech Marble Mouse - Control Center

    Hi, I recently updated my OS to 10.4.7, and while I've had some recent activity with different mice, I went back to the Logitech Marble Mouse and Control Center, and found the Control Center stopped recognizing the unit. I've tried to remove it via t

  • Help!  Is there a way to uninstall and reinstall Mail?

    Here's my issue... I'm still on an iMac ver. 10.2.8. Prehistoric, I know. Almost daily, my Mail will suddenly start retrieving over a thousand or so "New" messages. These emails are not new, but just a re-retreiving of my incoming mail from the last

  • Cannot view string from ApplicationResources in struts app

    Hello, I'm new to struts. I have added the following string to the ApplicationResources.propertiesfile : topic.label=Topic I am trying to display this label on the page without very much success. My page looks like this: <%@ page contentType="text/ht