ECC 6.0 Upgrade from R/3 4.7
Hi:
we recently upgraded our sandbox from R/3 4.7x110 enterprise to ECC6.0, after the upgrade was completed we had to restore the system from backup tape. after restore license information was lost, so I loaded the saplicense from the command line, license was loaded, but now when I try to login to system it says 'Login not possible, error in license check'
We use oracle 10g on Sun Solaris 10 platform.
If anybody has encountered this problem, please let me know.
Thanks
Hi Jacob:
I checked the message server port, entry is ok with 3600, I did a trace on saplicense check and here is the output. Funny thing is it was working before and I did not change anything except loading the licenese, also I can login using sap* but no server list in SM51.
glsapsbx:dsbadm 9% more dev_slic
trc file: "dev_slic", trc level: 3, release: "700"
Test license for SAP SYSTEM: DSB
rdisp/mshost: glsapsbx
rdisp/msserv: sapmsDSB
MsIAttachEx: connect to glsapsbx / sapmsDSB
NiIInit: allocated nitab (2048 at 100429c30)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiPGetNodeAddrList: got 2 interface(s) from operating system
[ 0-lo0 ] IPv4-Address: 127.0.0.1 UP
[ 1-ce1 ] IPv4-Address: 10.47.14.140 UP
NiHsLGetNodeAddr: got hostname 'glsapsbx' from operation system
HN='glsapsbx'; Ali[0]='loghost'; Ali[1]='loghost'; Ali[2]='glsapsbx.mwrd.org'; Add[0]=10.47.14.140;
Add[1]=10.47.14.140
NiIGetNodeAddr: hostname 'glsapsbx' = addr 10.47.14.140
NiHsLGetServNo: got service name 'sapmsDSB' from operation system
SN='sapmsDSB'; Port=0E.10/3600; PC=tcp
NiIGetServNo: servicename 'sapmsDSB' = port 0E.10/3600
NiICreateHandle: hdl 0 state NI_INITIAL
NiILocalCheck: matched local address: 10.47.14.140 (up)
NiIInitSocket: set default settings for new hdl 0 / sock 5 (UD; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: big endian, network, high val..low val
NiIConnectSocket: hdl 0 is connecting to /tmp/.sapstream3600 (timeout=5000)
NiHsLGetHostName: found address 10.47.14.140 in cache
NiIGetHostName: addr 10.47.14.140 = hostname 'glsapsbx'
NiHsLGetServName: found port number 0E.10/3600 in cache
NiIGetServName: port 0E.10/3600 = servicename 'sapmsDSB'
NiIInitSocket: set default settings for new hdl 0 / sock 5 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiIConnectSocket: hdl 0 is connecting to 10.47.14.140:3600 (timeout=5000)
NiHsLGetHostName: found address 10.47.14.140 in cache
NiIGetHostName: addr 10.47.14.140 = hostname 'glsapsbx'
NiHsLGetServName: found port number 0E.10/3600 in cache
NiIGetServName: port 0E.10/3600 = servicename 'sapmsDSB'
***LOG Q0I=> NiPConnect: connect (146: Connection refused) [nixxi.cpp 2513]
ERROR => NiPConnect: SiConnect failed for hdl 0 / sock 5
(SI_ECONN_REFUSE/146; I4; ST; 10.47.14.140:3600) [nixxi.cpp 2513]
NiICloseHandle: closing initial hdl 0
ERROR => MsIAttachEx: NiBufConnect to glsapsbx/sapmsDSB failed (rc=NIECONN_REFUSED) [msxxi.c
652]
Can't connect to message server (NIECONN_REFUSED)
Thanks
Similar Messages
-
Hi,
I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
If yes, could you forward some links so as to know how.
Thanks,
Farihahi,
>>>>Is that Possible..?
yes
>>>Wont there be any additional configuration needed ?
if you use IDOCs then you don't need anything special
Regards,
michal -
Hardware requariment for ECC 6.0 upgrade from ECC 5.0
Hello
I am on ECC 5.0 with oracle 9.2.0.7.I need to upgrade this to ECC 6.0.
I have already implemented MM,PP,FICO,QM and HCM.My current data base size is 900GB.This has 30GB monthly growth.
With this ECC 6.0 upgrade i am planing to implement PM,EP.
I know converting none Unicode system to unicode system is required some more hardware resources than the none Unicode.
Some document says 40-60% more disk space and 35% more processing speed from current system.
Can any one give me the correct information about the hardware requirement for ECC 5.0 to ECC 6.0 upgrade.
Thanks
RoshanthaCheck with the Links
https://websmp102.sap-ag.de/sizing
https://websmp208.sap-ag.de/quicksizer
http://www.4soi.de/
http://www.easymarketplace.de/
Kanagaraja L -
Impact on BI after ECC 6.0 Upgrade from Ehp 3 to Ehp 4
Hi All,
We are planning for an upgrade of our ECC 6.0 System from Ehp 3 to Ehp 4.
Could you please provide me inputs in what needs to considered in terms of BI system?
I know the following thing:
1) Delta Queues must be cleared before the upgrade starts but what needs to be considered for FI and CO Data Sources.
Any SAP Documentation available?
Thanks,
NeeleshWhat version of BI is yours...3.5 or 7.0???
Unless the ehp4 is bringing some functional changes to FI or other functional datasources which needs to be replicated on to the BI side.
i think the below link might help.
Technical news brought with EHP3 and EHP4 compared to ECC6
Thanks
Deepak -
ECC 6.0 Upgrade from 4.7 - EDI Interfaces
Hi Gurus,
Need your inputs on what are the precautions to be taken during ECC 6.0 Upgrade related to EDI Interfaces. with SAP upgrading from 4.7 to ECC 6.0, do you see any precautions need to be taken considering the middle ware involvement. Also, is there any changes in IDOC Structures in ECC 6.0 which my cause issues related mapping with middleware.
Please suggest.
Thanks & Regards,
C.L. Narasimhan "CLN"Hi,
generally, a release upgrade, delivers new idoc/message types or new releases of existing idoc/message types.
So, taking this in mind, you shouldn't have problems for the mapping of the messages, because the versions of the basic idoc, once released, cannot be changed.
You might have some application problems related to the inbound interfaces, but this is part of the game...the testing phase will highlight whether the problem exists.
A known problem is that the upgrade removes all the customer specific entries in the system table EDIFCT.
Further details are provided in the OSS note [https://service.sap.com/sap/support/notes/865142]
Regards,
Andrea -
Screens not working in ECC 6 after upgradation from 4.6c.
Hi,
The custom developed screens which where developed in 4.6c version is not working properly in ECC 6 after upgradation.Do i have to make any more changes for this .? If anyone have an idea please help me in this issue.The custom developed things are an extended functionality we have done to r/3.
Regards,
jinesh kumar c.Hi,
Check the Transportatation Logs in STMS for the programs/screens and check whether they are successfully tranported or not?
Because some times we get Dynpro errors for transportation of the screens.
Reward if useful.
regards,
Anji -
ECC 6.0 Upgrade from R/3 4.6B - Obsolete ABAP Language
Hello all,
I am part of a team that is performing an upgrade to ECC 6.0 from R/3 4.6B. I was wondering if all of the reports, FM, etc. that were developed under "old" ABAP will have to be modified in order to comply with the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca">Obsolete ABAP Language Constructs</a>.
If the code still works after the upgrade is it necessary to perform all these modifications?
Thank you very much in advance,
Best Regards,
EzequielI would say that is is not necessary. From the second paragraph of your link:
"Although you are generally not forced to modify your existing programs to represent these changes, it would be a very good practice to implement these rules and constructs with any new code development and coding samples." -
IM (Inventory material) is failing in ECC 6.0 upgrade from SAP R/3 4.7
Hello,
We are working on Technical upgrade project (SAP R/3 4.7 to ECC 6.0 EHP 6) for one of our Client.
when we are trying to create a purchase order (ME21N) in upgraded system (ECC 6.0), the field IM Material is failing to accept the internal material values from MATNR field. After entering the IM material, the value immediately got disappeared and it needs some workaround to get the material back in to the IM field along with MPN material.
It was working fine (accepting Internal material) in R/3 4.7, if we give a valid internal material, it immediately get copies to the field IM Material.
In case of ECC 6.0, it is completely failing.
Please suggest if you have come across any solution?
Regards
RifaieHi Selvan,
Go through document in below thread,you will get more info on upgrade
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/sapERP6.0+Upgrade%2520%2520SAP%2520ERP%25206.0%2520Upgrade
Faq's on SAP upgrade in below link,
SAP ERP 6.0 Upgrade
Thanks Regards,
Syfulla -
Webgui service fails in ECC 6/0 upgraded from ECC 5.0.
Our webgui service worked fine in our ECC. 5.0 system, however after the upgrade to ECC 6.0, the WebGui service fails. Has anyone experienced this? I've found other threads that said to change the WebGui service parameters, however, I'm not sure what the correct parameters are since the one's I have are from a ECC.5.0 system and not from and ECC 6.0 system.
Problem resolved...you need to publish the service "SYSTEM" and "WEBGUI" in se80 after a SP upgrade.
-
Upgrade from ECC 6.0 to NW 7.10
Hi,
I'm trying to plan ahead for our upcoming hardware replacement (3 yr lease). We are also planning for an ECC 6.0 upgrade from 4.7 Enterprise (unicode). I know that the power 6 chip has a built in decimal floating point processing which I believe will be useable with Netweaver 7.10.
Is the upgrade from ECC 6.0(a NW7.00 product?) to NW 7.10 a full upgrade or is it more like a big hot pack?
The reason I'm interested is that I would like to think I could take advantage of the Decimal Floating point processor sooner than later. The other part of the equation is that we have a BI based on NW 7.00 now.
If I can avoid purchasing another i5OS and paying for a processor activation because there is now a math feature built into the processor , I'm all for it. I would like to start planning now if the upgrade to 7.10 isn't going to be too painful.Hi Craig,
From what I heard, there would not be another major ECC release in the near future. New functions have been and will be released in "Enhancement packages" - hopefully it is not another new term to you...
NetWeaver 7.1 has been released (Q3 2007? not Q3 2008 for sure). BI folks might know whether there will be a release 7.1 or not.
Best regards,
Victor -
SAP ECC upgrade from EHP6 to EHP7
Is GTS upgrade from NW 7.2 to GTS 7.3 to be mandated as ECC is getting upgraded from ECC 6.0 EHP6 to EHP 7 . Why?
Hi John,
Your statement looks a bit misaligned.. There is no GTS 7.3 version, the SAP Netweaver 7.3* application server on which SLL_LEG GTS component sits.
The underlying Netweaver AS versions between ECC and GTS systems can be different BUT what needs to be the same is the GTS plugin component in ECC and GTS components in GTS system itself, as best practice they should also be on the same support pack level.
If the ECC upgrade from ehp6 to ehp7 requires you to upgrade SLL_PI gts plugin component in ECC, then in this case you should upgrade SLL_LEG component in GTS system to the same version.
I personaly dont think its required, but check Service markeplace for, PAM Product-availability-matrix and other ehp 7 requirements..
Hope this helps,
Branio -
Upgradation from 4.6C to ECC6.0
Hi all,
My client wants to upgrade the version from 4.6 to ECC6.0.
As a Functional consultant (FICO) what areas i learn additionally?
and what is the customization needs for that? i worked on 4.6 & 4.7 versions only.
If anybody having the customization & what to do's and not kindly send the configuration doc's.
what activities i have to do before starting this upgrade?
Give me an idea that drives me for a good achievement. points assured.
Thanks and Regards,
SomaDear Devaselvam,
Following threads will be informative:
Upgrade from 4.6c to ECC 6.0
Upgrade from 4.6c to ECC 6.0
Upgradation from 4.6C to ECC 6.0 (Naveen's post)
Also, you may visit:
http://solutionbrowser.erp.sap.fmpmedia.com/
Here, select:
Source Release Version: SAP R/3 4.6C
Tareget Release Version: SAP ECC 6.0
Solution Area: Sales and Service (or as reqd.)
Module: SD/LES (or as reqd.)
and Click: Search.
It will list-out the Release Version and the Delta Functionality, which can be downloaded to a word document, if required.
Hope, these information will help you, in your technical upgradation.
Very Best Regards,
Amit
Also check the release notes of ECC 6.0 on to http://service.sap.com -
Upgrade from R/3 4.6C to ECC 6.00 : languages
Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French for component EA-APPL
- French for component EA-DFPS
- French for component EA-FINSERV
- French for component EA-GLTRADE
- French for component EA-HR
- French for component EA-IPPE
- French for component EA-PS
- French for component EA-RETAIL
- French for component ECC-DIMP
- French for component ERECRUIT
- French for component FI-CA
- French for component FI-CAX
- French for component FINBASIS
- French for component INSURANCE
- French for component IS-CWM
- French for component IS-H
- French for component IS-M
- French for component IS-OIL
- French for component IS-PS-CA
- French for component IS-UT
- French for component LSOFE
- French for component PI_BASIS
- French for component SAP_ABA
- French for component SAP_AP
- French for component SAP_APPL
- French for component SAP_BASIS
- French for component SAP_BW
- French for component SAP_HR
- French for component SEM-BW
- French for component ST-PI
- Dutch for component EA-APPL
- Dutch for component EA-DFPS
- Dutch for component EA-FINSERV
- Dutch for component EA-GLTRADE
- Dutch for component EA-HR
- Dutch for component EA-IPPE
- Dutch for component EA-PS
- Dutch for component EA-RETAIL
- Dutch for component ECC-DIMP
- Dutch for component ERECRUIT
- Dutch for component FI-CA
- Dutch for component FI-CAX
- Dutch for component FINBASIS
- Dutch for component INSURANCE
- Dutch for component IS-CWM
- Dutch for component IS-H
- Dutch for component IS-M
- Dutch for component IS-OIL
- Dutch for component IS-PS-CA
- Dutch for component IS-UT
- Dutch for component LSOFE
- Dutch for component PI_BASIS
- Dutch for component SAP_ABA
- Dutch for component SAP_AP
- Dutch for component SAP_APPL
- Dutch for component SAP_BASIS
- Dutch for component SAP_BW
- Dutch for component SAP_HR
- Dutch for component SEM-BW
- Dutch for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancelHi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel -
Interview questions on upgrades from 4.7 to ECC
Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
ThanksHi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact. -
Upgrade from R/3 4.7 to ECC 5.0
Hello Everyone
This is my very first post on SDN. I am going to do an upgrade from R/3 4.7 to ECC 5.0. Can anyone please tell me how do I start and procede, this will be my very first upgrade and I definitely need help!!!. I will be really thankful if anyone can give me any suggestions as to how to procede with the planning and then the actual upgrade. What documentation from the service.sap.com should I follow???........PLS help!!!Dear Mir,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
Maybe you are looking for
-
I have cable broadband at home that I use with my G3 iBook running 10.2.8. It doesn't have an Airport card, so when traveling with it wireless isn't an option. I've noticed that when I stay in hotels with cable broadband, I can connect effortlessly j
-
Trouble transfering my vcr through a dv bridge into FCP
Hello, I am stumped and have been trying for three days. I feel I have tried everything. I have a DV bridge to transfer my vhs into my computer. It is just sees the audio and no video. It at one time saw the video for 15 min then it crashed and I can
-
Fax picks up fax AND voice calls
I thought when you have an external modem fax set up, the computer is supposed to tell if it's a voice call or a fax call. For some reason, the fax keeps picking up on ALL calls on the first ring (or any ring # I set it for) and no voice calls are ge
-
Using native database sequences in ODI
Hi, I am using ODI 11.1.1.7.0 on windows 64 bit machine. I have written the following queries: create table sequence_src (EmpName varchar(20), salary int); create table sequence_tgt( CustId int, CustName varchar(20)); create sequence emp_sequence min
-
S_ALR_87013531 how to increae its performance during execution
Dear sir How to increase the performance of this eport S_ALR_87013531 during execution,since it taking six hours or gives run time exceeded error. Regards kunal