ECC 6.0 with EHP4 fresh Installation

Hello Gurus,
A fresh ECC 6.0 with EHP4 needs to be installed on Wnidows + Oracle Platform, please let me know which of the following path should be followed?
1. SAP NW 7.0 installation (without EHP1) --> EHP 1 installation --> EHP4 Installation
2. SAP NW 7.0 with EHP1 installation --> EHP4 installtion
3. SAP NW 7.0 installation --> EHP4 installation
The other way to ask this questions is what are the dependencies between NW7.0 (ECC 6), EHP1 and EHP4?
Please let me know which of the above options is feasible and recommended. Please let me know a better option if its not present in the above options.
Regards,
Saurabh.

Hi,
refer the following SAP note 1143022.
Regards
Manohar

Similar Messages

ERP6 IDES EHP4 fresh installation

Hi,
We need to Install ERP6.0 IDES with EHP4 fresh installation.I have downloaded all the IDES software
My Company's Application Components>SAP ERP-> SAP ERP ENHANCE PACKAGE> EHP4 FOR SAP ERP 6.0 / NW7.01
IDES Version-->Windows Server
My question is can I directly Install ERP6.0 IDES with EHP4 with Installation master 'sapint.exe' ? Or do i need to go through solution manager down xml file and etc..
advice the steps..
- Jim

The answer is simple if you have the correct files from SAP you will be able to install EnhP 4 via sapinst.exe. You should get a hold of the Master Guides and Installation Documents as they would have anwsered this question for ya. No offense!! Good luck with the installation

IS-Retails on ECC 6.0 with ehp4

HI,
I am looking to install IS-Retails on ECC 6.0 with ehp4
Can any one guide me exact location to find the component and also installation procedure.Thanks
Best Regards
Narendar

Hello,
Goto Service Market place and goto download page. Then click on Search for Installations and Upgrades under Installations and Upgrades.
In the search tab fill with EA-RET.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
In the above link check under Logistics-general for more details for IS-Retail.
Regards,
Yoganand.V

Need ECC 6.0 EHP 5 Fresh installation Manually prepared Step by step Guide

Hi Expert,
I am new for Installations of SAP systems presently am working in support project. I am going to install ECC 6.0 EHP 5 with
Linux/oracle fresh installation on 12/01/2012.
Can any one help me to do the installation.
If you have manually prepared Step by step document please mail me
my mail id is :sprasad.k7@gmail
THANKS IN ADVANCE.
Regards,
Sivaprasad.
Edited by: kurapati siva on Jan 7, 2012 10:09 PM

Srikishan D wrote:
Hi,
>
> Check out the steps mentioned in the official SAP Document:
>
> http://service.sap.com/instguides -> SAP Business Suite Apps -> SAP ERP 6.0 -> SAP EhP EhP5
> Installation guide for your OS/DB
> First Steps for EhP5 for SAP ERP 6.0
> How to Install EhP5 for ERP 6.0
>
> - An EhP5 Ready installation only installs a system at Netweaver 7.0 EhP2 and ERP Components at 600 level.
> - You need a Solution Manager 7.01 at Stack 26 to generate a stack.xml for EhP5 Installation.
> - Check which technical usage types you need to install as part of Eh5.
>
EHP5 installation comes with Central application component i.e. SAP_APPL and EA-APPL on 605 version. Its different from EHP4 installation where all ERP components comes on 600 release.
Thanks
Sunny

Install ERP ECC 6.0 with EHP4 and JAVA stack (usage type)

Hi all,
I need to install ECC with EHP4 and also JAVA stack.
I know that I have to install 2 stacks with different SID and oracle homes, firts I have to install ABAP stack and then the JAVA stack, but wich usage type should I choose for JAVA STACK?
What I would like to have in my new installation would be the same usage type for JAVA stack like ERP 6.0 SR3 ABAP+JAVA stacks.
What should I choose?
Regards
Thanks

Hello,
SAP ECC 6.0 allows ABAP and JAVA but EHP4 this feature is not.
One thing I can suggest if you install ABAP stack first, it will initiates (even different SIDu2019s) the JAVA stack also.
So JAVA stack having a protection with ABAP, because you know JAVA stack is a very sensitive and time consuming one when you want to start are stop.
So you can do this sequence
Suresh

Many problems with a fresh installation on a DELL LAtitude E5510

Hi all,
i'm writing to let you know about so many problems and issues I'm experiencing with my new laptop. I love arch, but i think this is the pc which gave me the hugest number of problems. Most of them I think are arch-related, but some not...or maybe i don't know...probably all of them are because of my stupidity
1
the first was the problem with the keyboard. I was not able to use properly some chars like @#e in many applications (firefox, writer, kate (in kde)). TTY shell was properly working. Keyboard has been properly set in rc.conf and with setxkb. I partially solved installing gnome (and since here same problem) then i installed gnome extra and it seems to work now. I tested fedora and ubuntu live version and there wasn't any problem. I opened a thread for this
2
the problem related to shutdown is discussed here and is still unresolved. I don't know why, but i can't shut it down, it only restarts, also after the message "POWER OFF". No problems with ubuntu and fedora from the live cd. If i select shut down, i can correctly shut down
3
the third is a microphone problem. I tried with cited distros, but i'm not able to record anything and therefore no skype conversation is possible. I can hear but cannot be heard. I have 2 mics, a built' in and an exetrnal jack. I tried many combination with line in, front mic...but nothing to do.
4
i created a dual boot with win 7. from disk utility in gnome i saw that the windows partition is sda3. then i set the menu.lst with rootnoverify hd(0,2) but it gives me an error message saying: no MBR boot loader is installed. I'm very confused. so many problem on only a machine ( a dell brand new machine - people say dell is very compatible with linux...but...i'm not pretty sure)
I wanted just to signal this situation. I don't knwo if you can help me. I don't know anymore what to do.
Thanks a lot for your patience and your help!

lang2 wrote:Have you resolved any of these issues? I probably will try to install Arch on the same laptop. This is a warning for me.
Hi,
well, i think that if you want to use all functionalities with this laptop, no linux distribution will give you the full support! I experienced all those problems, but i solved in some way some of them. Read the following!
1
the first was the problem with the keyboard. I was not able to use properly some chars like @#e in many applications (firefox, writer, kate (in kde)). TTY shell was properly working. Keyboard has been properly set in rc.conf and with setxkb. I partially solved installing gnome (and since here same problem) then i installed gnome extra and it seems to work now. I tested fedora and ubuntu live version and there wasn't any problem. I opened a thread for this
This issue has been solved when i re-installed AGAIN arch! i don't what was before...but now, i'm writing from here, with GNOME. I don't know, but the only difference wrt the previous gnome installation was the partition scheme: i used a partition for boot, one for /var, one for home, etc...as explained in beginner's guide. I don't think it's related, but it's the only difference i can remember.
2
the problem related to shutdown is discussed here and is still unresolved. I don't know why, but i can't shut it down, it only restarts, also after the message "POWER OFF". No problems with ubuntu and fedora from the live cd. If i select shut down, i can correctly shut down
this issue has been solved after one of the last system update. Actually i'm able to shut down and reboot correctly.
3
the third is a microphone problem. I tried with cited distros, but i'm not able to record anything and therefore no skype conversation is possible. I can hear but cannot be heard. I have 2 mics, a built' in and an exetrnal jack. I tried many combination with line in, front mic...but nothing to do.
This is still unresolved!! I also asked in alsa irc-channel, the guy gave me instructions to perform some tests, and at the end, he said that he never heard about that chipset!
Actually, sound is fine, mic doens't work. I tried ubuntu, fedora (both in live cd mode) and with all of them i'm not able to record any sound from mic. The strange thing is that in volume control there are controls for mic, but even if you enable them, you're not able to record. If you close and re-open volum control, they are again disabled. Nothing to do actually!
4
i created a dual boot with win 7. from disk utility in gnome i saw that the windows partition is sda3. then i set the menu.lst with rootnoverify hd(0,2) but it gives me an error message saying: no MBR boot loader is installed. I'm very confused. so many problem on only a machine ( a dell brand new machine - people say dell is very compatible with linux...but...i'm not pretty sure)
I don't know why, but if I set hd(0,1) it works!
MORE1:
the SD-card reader, simply doesn't work! checked on internet i seems to be incompatible with linux!
MORE2:
i'm not able to make the touchpad working with side scroll! I didn't work a lot on it, as i'm using the external mouse...but this is an other issue. Just configuring xorg file, it doens't work.
Let us know if you are able to solve any of these.
Good luck

Working with a fresh installation, need help...

So my MacBook pro is running some pro software such as Adobe's creative web suite and VMWare's Fusion, and I have been experiencing poor performance issues since these were installed. I've been recommended by a Genius to re-install fresh.
Thanks to MobileMe, I can keep pretty much everything without having to do anything manually. Though I'm left wondering how I will restore all of my music and photos? Do they sync through MobileMe? Is there a way to restore just photos and music from Time Machine?
Thanks!

You can easily back up your iPhoto and iTunes library. In your Pictures directory, just back up the iPhoto Library.
In the Music directory, simply copy the entire iTunes folder.
If you are using Time Machine, then you should be covered. If not, then they are very easy to back up to any external media. To Restore them after a clean install of Snow Leopard, just buy copying them back into their original, respective directories.

Syncing an iPhone 4 with a "fresh installation" of iTunes in a new computer

Hi from Madrid!
I hope my English is ok and I wish you could help me because I have a little problem. My laptop has broken and died three days ago, I had the "****" graphic chip nvidia 8600M GT, and finally it burned. It was suddenly from a day to another, I have bought a new computer with Windows 7, and I haven't dared to sync with the iTunes installed in this new laptop, because I'm afraid of losing all my information and data in my iPhone 4, when syncing with the new installed iTunes for first time. In conclusion, what I'd like to know is what I have to do not to lose all my data in the phone when syncing for the first time, to pass all the data in my phone to the computer and not vice versa or combine it with the computer, because it's very important to keep it.
PD: I think I may be able to get my old iTunes library because I rescued the hard disk, but I'd prefer to know if there is something easier because what I only want is to keep my data in the iPhone: messages, saved games, etc.
Thank you very much for your help.

By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you replaced your computer, your phone, sees your computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else, as Apple makes no provision to do so:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in itunes.
2. Make sure you have one contact & one event in the supported applications(Outlook, Windows Address Book) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
You should be good to go.
But, if at all possible, move your entire iTunes library from your old computer to your new computer FIRST. Also move any data you consider important: contacts, documents, calendars, etc.
http://support.apple.com/kb/HT4527

ORA-27102 IN FRESH INSTALLATION

Hi Forum
I have a problem with the fresh installation my environment is:
Solaris10 and Oracle DB10g R2 and the box have 4Gb RAM
The installation can`t continue and stop in the Database creation 2% with the error message ora-27102, the manual quick installation say:
==========================================================
On Solaris 10, use the following procedure to view the current value specified for resource controls, and to change them if necessary:
To view the current values of the resource control, enter the following commands:
# id -p // to verify the project id
uid=0(root) gid=0(root) projid=1 (user.root)
# prctl -n project.max-shm-memory -i project user.root
# prctl -n project.max-sem-ids -i project user.root
If you must change any of the current values, then:
To modify the value of max-shm-memory to 6 GB:
# prctl -n project.max-shm-memory -v 6gb -r -i project user.root
==================================================
But when I change the shm-memory and reboot the box, the value is the same default 998MB.
Please could anybody help me to resolve this problem
Thanks and regards,
Wilson

Please, could anybody know about this issue??

ECC 6.0 with EHP1 installation

Hi Guys,
Not able find the correct installation guide for ECC6.0 installation (SR3) on AIX/DB2 platform. Can anybody please provide some link for the same ?
Also my customer has a requirement for latest available EHP i.e. EHP4. I understand that first we have to install EHP1 and then upgrade the system to EHP4. Is there any other alternative ?
Please provide some inputs if you worked on ECC6.0 installation with EHP1/4. I'm urgently looking for some help on this.
Thanks

Hi Mike,
If this is a fresh installation then you should go with the ERP 6.0 EHP4 READY SR1 Installation. The plus point will be in ehp4 ready, after the installation the netweaver software components are already on ehp1 and kernel is 7.01, while the ecc software components are still in the 600 level.then you can update it to EHP4 using EHPi.But remember it is MANDATORY that you should proceed with the EHP4 installation using SAPephi, else i think the system will be in a state where SAP will not support and its not advised to use system like that.
if you go with the normal installation you'll get version 700 and kernel on 700 and then you take it to EHP4.
I will go with option one.
Best Regards
Niraj

Upgrade SAP ECC 6.0 with SPS 12 to EHP4

Hi!
I would like to update a SAP ECC 6.0 system with EHP4.
I am on Windows 64 Bit with Oracle.
My current SP stack of SAP ECC 6.0 is 12.
The questions are:
Does the SPS 12 of SAP ECC 6.0 fullfil the requirements for the SAP EHP4-Upgrade?
If not what is the strategy to upgrade SAP ECC 6.0 system with SPS 12 to EHP4?
Any helpful information will be very appreciated!
Thank you!

Hi
You can check the below notes
Note 1143022 and 1134872 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
Regards
Uday

I have Problems with starting em dbconsole after a fresh Installation

I have been having problems running EM console on Oracle 10g R2 on windows xp after a fresh installation and I did not receive any error messages while the Installation was going on. I was able to log into sqlplus successfully and I started the instance and em dbconsole (which started up successfully, but still yet , after logging into em dbconsole the status of the instance is still not running?
I still tried further to startup the instance, after entering my host credentials and sysdba account, I get this error message;;
Error
java.lang.Exception: Exception in sending Request :: null
What could possibly be the reason for this situation?

Thanks 4 responding to my enquiries, accidentally I had already gotten a tip from someone who suggested that I should turn off the dbcontrol and leave the database and listener running, then recreate the enterprise manager repository using the "emca.bat" utility.
<emca.bat -config dbcontrol db -repos recreate>
Which I did after entering the values I got this error message;
Do you wish to continue? [yes(Y)/no(N)]: y
Jun 24, 2006 7:40:20 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\dcity\emca_2006-06-24_07-38-59-PM.log.
Jun 24, 2006 7:40:21 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Jun 24, 2006 7:40:22 PM oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\dc
ity\emca_repos_create_<date>.log for more details.
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\dcity\em
ca_2006-06-24_07-38-59-PM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\dcity\emca_2006-06-24_07-38-59-PM.log for more details.
From the look of this, the repository could not be created? What is probably the next step to solve this problem?

EHP4 Reday installation

Hi,
What is the ehp4 ready installation procedure.I have fresh system and ehp4 ready dvd's?what is the flow?
i have read where it said
install ehp4 ready(nw component will be in 7.01 and application component will be in 600) + download patches for ehp4 from mopz + install ehp4 with the patches using sapepi.In this after ehp4 ready installation,if i update any one component say sap_appl to 604 is ok? is system is called ehp4 system at this stage? or do i need to update ehp4 for all application components like ea_appl,finbasis,ea-finserv etc?
Thanks
Rajesh

Hi,
Kindly go through the forum commands on,
Re: What is SAP ERP 6.0 EHP4 READY SR1 Inst ..??
This would answer all your ques.
Jansi

Fresh Installation Boot Errors

I'm new to trying to work with Solaris 10, and to a lot of Solaris in general, so while I'd normally be happy to do a lot of reading (and have tried searching for answers on google a good deal already), I'm having a problem after a fresh installation of Solaris 10 on a Sparc T3-1 server that I'm hoping someone can point me in the right direction to solve.
During the install I told the text installer I wanted to do a ZFS installation using both of my disks (only 2) in a mirrored configuration. I selected the default set of core system packages.
After the install seemed to be done and the system rebooted, I'm getting the following when it comes up:
Boot device: /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5000c5003a04f911,0:a File and args:
SunOS Release 5.10 Version Generic_142909-17 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
Failed to plumb IPv4 interface(s): igb0
Jul 7 12:12:34 svc.startd[9]: svc:/network/physical:default: Method "/lib/svc/method/net-physical" failed with exit status 96.
Jul 7 12:12:34 svc.startd[9]: network/physical:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Hostname: tempdb
Loading smf(5) service descriptions: 1/136
WARNING: svccfg import /var/svc/manifest/application/management/sma.xml failed
2/136
WARNING: svccfg import /var/svc/manifest/application/management/wbem.xml failed
3/136
WARNING: svccfg import /var/svc/manifest/application/management/seaport.xml failed
followed by another 133 lines with similar failures, followed by:
svccfg import warnings. See /var/svc/log/system-manifest-import:default.log .
WARNING: svccfg apply /var/svc/profile/generic.xml failed
WARNING: svccfg apply /var/svc/profile/platform.xml failed
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass): Reading ZFS config: done.
Mounting ZFS filesystems: (6/6)
After doing a new install off of the install media (cd) I would have expected the system to be able to boot without errors, but obviously I've missed something or done something wrong, and I'm hoping that someone can point me in the right direction for figuring out what that is and fixing it.
I'm happy to provide any other details if there are questions.

I do see a few messages in the installation log that give me concern. The first is:
*Creating and checking file systems
- Creating rpool/ROOT/rdata dataset
- Creating dataset rpool/ROOT/rdata/var
libshare SMF initialization problem: entity not found
libshare SMF initialization problem: entity not found*
There are also quite a few instances where a PKG installation says something like this:
*Installation of <SUNWcnetr> was successful.
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
346 blocks*
or
*Installation of <SUNWj5dvx> was successful.
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
7153 blocks
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.dir>failed
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
pathname does not exist
ailed
pathname does not exist
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.alias.all> failed
pathname does not exist
Installation of <SUNWaspell-en-share> was successful.
14501 blocks
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/75dpi/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/TTbitmaps/fonts.dir> failed
pathname does not exist
Can't open ./fonts.dir
Can't open ./fonts.dir*
There are also a few that say:
Reboot client to install driver.
The installer did seem to reboot at the end. Does the installer handle those 'reboot client' cases itself?

Error with DB instance installation on SQL Cluster environment

Dear Experts,
We have an issue with UAT installation of ECC 6.0 on the following environment
MSSQL :
Microsoft SQL Server Management Studio                              10.0.4064.0
Microsoft Analysis Services Client Tools                              10.0.4064.0
Microsoft Data Access Components (MDAC)                              6.1.7601.17514
Microsoft MSXML                              3.0 6.0
Microsoft Internet Explorer                              8.0.7601.17514
Microsoft .NET Framework                              2.0.50727.5446
Operating System                              6.1.7601
OS :
Microsoft Windows 2008 SR2
While running the DB instance installation with Distributed setup, we are facing the following issue during the step "Grant database access for account usm" . SAPINST is run from the central instance to install the DB instance on a separate server. (Both the servers are on the same domain). The IDs SIDADM, SAPServiceSID exists in the DB with sysadmin permissions.
SAPINST logs is as follows
INFO 2011-11-28 20:24:52.263
Creating file C:Program Filessapinst_instdirx.
INFO 2011-11-28 20:24:52.263
Removing file C:Program Filessapinst_instdirx.
INFO 2011-11-28 20:25:08.169
Creating file C:Program Filessapinst_instdirERPEhP4AS-ABAPMSSDISTRIBUTEDDBx.
INFO 2011-11-28 20:25:08.169
Removing file C:Program Filessapinst_instdirERPEhP4AS-ABAPMSSDISTRIBUTEDDBx.
INFO 2011-11-28 20:25:11.326
Creating file C:Program Filessapinst_instdirx.
INFO 2011-11-28 20:25:11.326
Removing file C:Program Filessapinst_instdirx.
INFO 2011-11-28 20:25:12.201
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.45.xml'.
INFO 2011-11-28 20:25:12.576
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.46.xml'.
WARNING 2011-11-28 20:25:14.138
Unable to get information about path
LABEL.ASC using GetVolumeInformation. Operating system error message: The specified path is invalid.
WARNING 2011-11-28 20:25:14.935
Host name has been overridden. Using host name 'eccuatad1' which might not be the real host name.
INFO 2011-11-28 20:25:14.935
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/inifile.15.xml'.
INFO 2011-11-28 20:25:15.44
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
INFO 2011-11-28 20:25:20.513
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/keydb.15.xml'.
INFO 2011-11-28 20:25:20.607
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.47.xml'.
INFO 2011-11-28 20:25:20.638
Execute step doGrantServiceRights of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0
ERROR 2011-11-28 20:25:20.857
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'MSSQL$U001' NT service).
ERROR 2011-11-28 20:25:20.873
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2011-11-28 20:25:20.873
FCO-00011 The step doGrantServiceRights with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
Could you please let us know any resolution for this. Thank You

Vincent,
Thanks for the reply. Still I am not clear on how to use the STM tools in my scenario. I had issues with the domain installation with distributed in a cluster. Working with SAP and got a reply today saying that SAPINST will be modified.
Krishna

ECC 6.0 with EHP4 fresh Installation

Similar Messages

Maybe you are looking for