ECC 6.0 with ITS Support

Hi All,
    In my commpany, actually are instaled the R3 Enterprice 4.7, having some applications to be used on Portal, across the ITS. In a short way, the enterprice need to migrate up to the ECC 6.0, and it's necessary to keep the ITS applications. So, the question is if that vertion have ITS support into the package?, becausse are essential to keep the ESS/MSS aplications.
Thanks in Advance.
Jorge

Hi gentlemen,
We want also integrate a scenario in ECC 6.0 via ITS 640. But we get an error when trying to logon. The SAP GUI version (which is 6.4 PATCH 19)is not the actuel version and won't let me in.
Could anyone help me out!
Best regards,
G. Leurs

Similar Messages

  • TS1292 Hey, im facing a problem while im using the purchesing , its showing me that: contact with apple support itunes???? Please help

    Hey, im facing a problem while im using the purchesing , its showing me that: contact with apple support itunes???? Please help

    Use the link below to contact iTunes support.
    http://www.apple.com/emea/support/itunes/contact.html

  • EP with ECC 6.0 using ITS

    Hello All,
    We are upgrading from R3 4.7 to ECC 6.0.  We currently have EP 7.0 with ITS working alongside R3 4.7.
    I am aware ECC 6.0 uses ICM instead of ITS, but will the current ITS 6.40 still work when connected to ECC 6.0? Or will I have to perform the changes so the portal uses the ICM?
    Thanks,
    Nick.

    Nick,
    The official line from SAP would be to replace the old ITS based ESS screens with the new ESS 1.0 Business Package content - i.e. the new Webdynpro Java screens.  Personally, depending on your circumstances i don't see that it's quite that straight forward, and here's why:
    <u>Pros</u>
    - Webdynpro is now the "standard" UI for portal end user content.  Some of the old ITS technology still works in ECC, but the there is no guarantee how long that will continue.
    - You can do a fair bit to the Webdynpro screens (hide fields, add text etc) via personalisation, without any programming.
    <u>Cons</u>
    - Sap seem to be moving toward developing more and more new content in Webdynpro ABAP.  Meanwhile, if you need to change anything significant in the current ESS Webdynpro Java screens you will need to have NWDI installed, and have available developer resources with Java experience.
    - If you have custom IAC's in your old ESS that don't have a standard equivalent in the new ESS Business Package, what do you do?  Convert them to internal ITS?  Rebuild from scratch in Java WD, or ABAP WD?
    - Even some of the standard content from the old ESS is not available in the new business package.  For example, the old TEM services (PV7I, PV8I) are not delivered, SAP assume you will use the new LSO screens.  If you aren't implementing LSO, it's back to the old ITS services??
    Sorry if that's not particularly useful, but without knowing the scope of your ESS implementation it's difficult to provide a clearer answer.
    Regards,
    John

  • Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! They said it should be pulsating but it's not

    Hi! I'm just having a little trouble when it comes to battery charging of my iPhone 5 with its new iOS 7! It doesn't indicates that the battery is fully charge unlike the old version of iOS! I already read some reviews and discussion about this. They said that the lightning bolt should pulsate when charging but it's not!

    Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
    A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
    I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
    What is using data, unsolicited, every 6 hours?
    Why does it change?
    Why does it only happen on the iPhone 5 series and not the 4?
    Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
    I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ...

  • Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

    Morning Friends,
    I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
    I am using Sharepoint 2013 with Office 2013 
    I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
    When attempting to open / edit doc, receive error
    "We're sorry. We can't open <document name> because we found a problem with its contents"
    Details - No error detail available.
    Any info or advice would be greatly appreciated. 
    Very high level view of what I have done:
    1 - Created content type called "Letters"
    2 - Added site columns " First Name" and "Last Name"
    3 -  Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
    4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
    5 - Created a new document library called "Letters"
    6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
    7 - Then I clicked "Add from existing content types" and added the "Letters" content type
    8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
    9 - Created a new 2010 Site workflow called "Create a Letter"
    10 - To the workflow I added the action "Create List Item"
    11 - Configured the action to create Content Type ID "Letters" in the document library "Letter" 
    12 - For the "Path and Name" I gave it a basic name of "Letter to"
    13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
    14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
    15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
    16 - Saved - published and ran the work flow.
    17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
    18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe" 
    19 - Go to open / edit the Word document and receive the following error
    thoughts? Any info or advice would be greatly appreciated. 

    See this MS support article for SP2010 workflows and generating Word docs:
    https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
    "This behavior is by design. The Create
    List Item action in the SharePoint
    2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
    I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

  • Can two or more devices use the same Apple  account with different cell phone numbers. I want to use FaceTime on a my 5s and my wife wants her own FaceTime on a new iPad Air with its own cell number but be linked with me with iCloud to share music

    I have a 5s with an apple account and wife has a iPad air with its own cell number. Does the iPad need it's own apple account to use it's own phone number so her FaceTime calls are not sent to my phone. We want to be able to link each device to iCloud and share music, photos, ect. iPad iMessage and FaceTime have my cell number activated.

    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • Is SAP BI reporting is possible in ECC 6.0 with same client

    Hi all,
                             My requirement is, we need to design SAP BI data flow in ECC 6.0 with same client only.  Now I am designing the BI data models as per the requirement of SD sales reports in ECC 6.0.For this, when i was extracting the data from SD datasource(2lis_11_vahdr) in RSA3 its showing 0 records,actually  as per VA01 some records are available but its not showing in the RSA3.
                              My doubt is , is it possible to extract the data from ECC 6.0 and load the data to the datatargets  and get the SAP BI reports in ECC6.0 with the same client.
                              Please suggest as soon as possible.
    Thanks

    It is possible to load the data from the same client. It all depends on the source system and the client which has been connected in the RFC connection.
    Let me know if this helps.
    Regards,
    Avinash

  • At the end of my rope with phone support.

    I'm not sure what anyone here can do, but I need somplace to share this with. Its extremely frusturating.
    Less than a month ago, I purchased my first iMac. It was a slightly older model- a 20" Aluminum 2.0ghz machine. It was purchased from a re-seller and had obviously been sitting on the shelf for a while. I know that the warranty date starts from the purchase date of the re-seller; there is a form to fill out if it needs to be changed to your actual purchase date. In a situation like mine, where the computer had been in the store for around a year, this was essential if I wanted any kind of phone support.
    I filled out these forms, faxed a copy of the receipt to the number I was supposed to, and assumed everything would be fine. Within 24 hours, Boot Camp managed to screw up the OS X partition of my hard drive. I needed to make several calls to customer support, where I had to argue with all of them due to the purchase date update taking up to 72 hours to go through. After several phone calls, where I had to explain my situation 15 times and wait on hold for 45 minutes while they found out that it takes 72 hours for the change to go through, and after literally 5 hours of driving to my nearest Apple stores until someone was willing to help me with the problem even though I was "out of warranty" (Reminder- I had purchased this computer 2 days prior. New, off the shelf in the store. It absolutely should've been under warranty.) I was finally able to get the computer fixed.
    Today, I figured I'd check on the status of my purchase date switch, so the next time something goes wrong with my computer I don't have to battle with tech support to get them to listen to my problem. I entered the serial number in the warranty info page, and it tells me:
    *Our records indicate that your product is covered under a custom contract. For more information about your coverage, please contact us.*
    *Your product is not eligible for complimentary phone support.*
    When I click "contact us," the only thing that would be able to potentially help me out is the Apple Customer Service phone number. I don't feel like calling and having someone with a medium-thick accent repeat back to me what they understood my issue to be 5 times until they finally get it right. I would love to write it out so someone can just re-read it if they don't wrap their mind around it the first time.
    I don't see why I should have to argue my case. I went to an Apple Authorized Reseller, swiped my credit card, and walked out with a new iMac. No, it's not the newest model, but its still new. That's money that just went in Apple's pocket, because of my purchase. There is absolutely no reason why it should be this big of a struggle just to get the warranty that I deserve. I don't feel like I'm being unreasonable or out of line in any way.
    Does anyone know who I can EMAIL about this, or am I going to have to put up with the non-help I get on the phone? They're going to tell me that they can't help me out, because I'm supposedly not covered for phone support anymore. Ugh. Please help.

    I'm not sure what anyone here can do
    Nothing. These are user to user forums, of which Apple employees do not take part in.
    Does anyone know who I can EMAIL about this,
    Nobody...Apple does not offer email support/correspondence. Call support and ask immediately to speak to customer relations.

  • Sap standard report for showing line items of any GL with its offsettinga/c

    Dear all,
    Is there any standard report in SAP to show line items of GL with its offsetting accounts. in short i want to see all journal entries of one specific GL account.could any of you help me in this?
    points will be rewarded for the relevant answer.
    thanks,
    hemanth

    Hi Dave,
    I have gone through the note 112312.But there it is mentioned that it relates to 4.6x versions.We are in ECC 6.0.and we have not implemented new GL accounting concept.Is there any other alternative functionality or any other OSS note which meets my requirements.Can you please suggest me on this ?
    Thanks,
    Hemanth

  • No permission to copy file (to NAS with AFP support) - extended attributes?

    For certain files that I copy from one of my drives to the NAS here (Synology 206j), ever since upgrading to Snow Leopard, Finder's behaviour has changed. It will simply refuse to copy the file, stating that "The operation can’t be completed because you don’t have permission to access some of the items."
    The source is an external USB drive in Mac OS Extended format, I do have full permissions on the files and in any case the drive is set to ignore ownership.
    The target is, like most NASes, in EXT3 format. It's sharing via its own AFP implementation.
    I'd have tried repairing permissions, but for whatever reason, it's greyed out on my external drives. Since then I've figured that it was probably not that anyway, which will become apparent:
    I tried copying the file via the terminal and it actually worked, but also gave an error: "cp: myfile: could not copy extended attributes to /Volumes/media backup/myfile: Operation not permitted"
    This suggests to me that, as expected, the target volume doesn't support extended attributes. But rather than popping up with the message that Leopard did (something along the lines of "your target volume doesn't support extended attributes so your file's metadata may be lost, do you wish to continue") it just aborts instead.
    I'm not sure if this is a Snow Leopard problem or a change that Synology need to catch up with. A workaround is to compress the file to ZIP first.
    Thought I'd mention it here before trying to report it as a bug somewhere. Anyone else having similar issues, either with a NAS or some other storage, in which case please specify?
    Message was edited by: Cloudane

    Thanks guys, yeah I've been monitoring the netatalk mailing list myself: they're onto the same problem, have come to the same conclusions about it being Extended Attributes and have much better proof of such than I
    It looks like they're currently debating the best way to fix it (pretending to support EAs but sending them to a black hole being the quick and dirty way, but I suspect they'll go for implementation)
    It'll be a while for sure, but the Synology guys are very good with Mac support so I'm sure they'll apply the update fairly quickly once the netatalk crew get something public. FWIW, I did detect a certain sense of urgency from the netatalk discussions.
    Although it's essentially answered, I'll leave the question marked as unanswered in case Apple come up with a better one
    Message was edited by: Cloudane

  • How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

    How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

    Hi odedn,
    Thank you for posting in MSDN forum.
    Based on your issue, you mean that you want to copy the test plan with test results from the current team project
    to other team project, am I right?
    If yes, as far as I know that when we copy test plan with test results to other team proejcts. It is default that
    there just will not copy the test plan with test results (pass/fail) to other team project in MTM.
    You can refer the following MSDN document’s
    what gets cloned, it explained that which objects are copied from the source test plan to the destination test plan.
    Reference:
    http://msdn.microsoft.com/en-us/library/hh543843.aspx
    If you still want to this feature, I suggest you can
    submit this feature request:
    http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
    you submit this suggestion, I hope you could post that link here, I will help you vote it.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do I cancel with online support?

    How do I connect with online support? 

    What is the “right” answer?  It never shows. 
    Can you please just forward this message to a real human being?  I have received a promotion and no longer need Adobe Creative Cloud.  I have had this service since March 2012.  Please cancel my subscription.
    Thank you.
    Maria Grimm
    Director of Member Relations
    LifeCenter Plus
    330-655-2377 ext. 115
    This message and any attachments are confidential and intended solely for the addressees. If you receive this message in error, please delete it and immediately notify the sender. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized use, copying, or dissemination is prohibited. E-mails are susceptible to alteration. Neither LCP Enterprises. LLC d/b/a LifeCenter Plus nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified.

  • [SOLVED] haskell - citeproc-hs was not compiled with bibutils support

    Hi all,
    since I have not yet been able to get help in arch-haskell's IRC channel, I am posting here, maybe someone has an idea:
    I am using pandoc which I have retrieved along with all its dependencies from the haskell binary repository. But when I try to process a bibliography, I get an error message from citeproc-hs:
    pandoc: citeproc: Bibliography format not supported.
    citeproc-hs was not compiled with bibutils support.
    Supposing that the error message is not misleading, I wonder how do I recompile with bibutils support then?
    Googling gave some results concerned with haskell-hs-bibutils, which seems to have been on the haskell repo earlier but is there no longer, so I installed it from AUR (modifying the PKGBUILD to accept haskell-syb>=0.3 instead of =0.3).
    Reinstalling haskell-citeproc-hs did not help.
    Next I tried with cloning habs the haskell repo (as is described here). Since I could not find any switch in haskell-citeproc-hs's PKGBUILD that would disable bibutils support I directly issued
    ./makeahpkg -- haskell-citeproc-hs
    but the resulting package gives the same error as the one from the repo.
    Should I have taken extra steps to build/install haskell-hs-bibutils also in the habs chroot? Or anything else?
    TIA,
    Andreas
    Last edited by awagner (2012-08-01 08:36:06)

    awagner wrote:Should I have taken extra steps to build/install haskell-hs-bibutils also in the habs chroot? Or anything else?
    Yes, it seems this was the problem. Besides cloning habs, I now went on to manually copy the necessary files of bibutils-dynamic and haskell-hs-bibutils from AUR into the local HABS tree, modify dependencies in haskell-hs-bibutils, haskell-citeproc-hs and haskell-pandoc (an additional dependency on haskell-hs-bibutils in haskell-citeproc-hs, in the other cases only change of version numbers).
    Then
    ./makeahpkg -c -- bibutils-dynamic haskell-hs-bibutils haskell-citeproc-hs haskell-pandoc
    produced four packages which I could install and now the error is gone and I can turn to debugging my document and bibliography files

  • Archiso-live with slax support

    I found a way to make archiso scripts work like the old arch-live. By mounting the slax ext2 initrd has root filesystem. The idea is that archiso-live will be like the older arch-live based on slax but will have the archlinux kernel instead of slax kernel.
    I couldn't do this before cause the linux-live scripts would not load right in initramfs with archlinux kernel cause of missing kernel modules that would have been build in kernel with slax kernel.
    I got the system working by making a aufs union with /tmpfs/initrd and /real_root folder. Anyway i think i will share the code for you to understand:
    mount_tmpfs ()
    #if [ "x${ramdisk_size}" = "x" ]; then
    ramdisk_size="25M"
    #fi
    msg -n ":: Mounting tmpfs, size=${ramdisk_size}..."
    mount -t tmpfs -o "size=${ramdisk_size}" tmpfs /tmpfs
    msg "done."
    # args: ext2 file image
    _mnt_ext2_file()
    msg "::: Adding new real_root branch: ${1}"
    /bin/modprobe -q loop max_loop=255 >/dev/null 2>&1
    mkdir -p ${2}
    if ! /bin/losetup "/dev/loop${LOOP_NUM}" ${1} > /dev/null 2>&1; then
    echo "ERROR: Cannot mount loop device /dev/loop${LOOP_NUM}"
    echo " Couldn't mount all addons"
    break
    fi
    /bin/mount -t ext2 "/dev/loop${LOOP_NUM}" ${2}
    export LOOP_NUM=$(( $LOOP_NUM + 1 ))
    run_hook ()
    export LOOP_NUM="0"
    if [ "x${from}" != "x" ]; then
    BOOT_MOUNT="/live"
    fi
    if [ ! $(ls /dev/loop*) ]; then
    echo "Creating loop device nodes."
    mknod /dev/loop0 b 7 0
    mknod /dev/loop1 b 7 1
    mknod /dev/loop2 b 7 2
    mknod /dev/loop3 b 7 3
    mknod /dev/loop4 b 7 4
    fi
    if [ -f "${BOOT_MOUNT}/initrd" ]; then
    mount_tmpfs
    mkdir -p "/tmpfs/initrd"
    _mnt_ext2_file "${BOOT_MOUNT}/initrd" "/tmpfs/initrd"
    /bin/modprobe -q squashfs >/dev/null 2>&1
    /bin/modprobe -q sqlzma >/dev/null 2>&1
    /bin/modprobe -q unlzma >/dev/null 2>&1
    /bin/modprobe -q aufs brs=1 >/dev/null 2>&1
    /bin/mount -t aufs -o nowarn_perm,br:/tmpfs=rw aufs /real_root
    /bin/mount -t aufs -o remount,add:1:/tmpfs/initrd=ro aufs /real_root
    cp -Raf /lib/modules /real_root/lib/modules
    udevpid=$(/bin/minips -C udevd -o pid=)
    [ "x${udevpid}" != "x" ] && /bin/kill -9 $udevpid 2>&1 >/dev/null
    #Yep, we're bailing out here. We don't need kinit.
    msg ":: Passing control to Archlinux Initscripts...Please Wait"
    /bin/umount /sys
    /bin/umount /proc
    exec /bin/run-init -c /dev/console /real_root /sbin/init
    fi
    Right the moment its a ext2 filesystem of initrd on the livecd. I plan on changing it to squashfs so we can save 6mb or so. I copy the kernel modules cause i don't want anything missing even though its mostly has everything the linux-live scripts. Just don't want risk crashing the system with out some module that was build slax but not in archlinux.
    Anyways i hope this helps with the development of archiso.
    EDIT: Fix a typo. tmpfs can only understand M not MB for size.
    Last edited by godane (2009-01-13 19:50:08)

    I have just released the newer archiso-live with slax support.
    http://godane.wordpress.com/2009/01/13/ … 2-release/
    you can get the build scripts here:
    http://github.com/godane/archiso-live/tree/master
    I hope this helps.

  • SAP ECC 6.0 with DB2 on winds 2008r2 using VMware

    Dear All,
    Request you to guide me in giving some information related to
    -compatibility
    -best practice
    -official guidelines for SAP installation.
    We have purchased SAP ECC 6.0 with DB2 as RDBMS.
    Thanks in advance.
    by
    Harika N

    I got information
    Note 1130801 - DB2 LUW, DB2 z/OS release for VMware, XEN, and Hyper-V
    The usage of DB2 Version 9.1 for LUW, DB2 Version 9.5 for LUW, and DB2 9.7 for LUW on Windows and Linux (SUSE and RedHat) with VMWare, KVM, and XEN is permitted and supported by SAP and IBM.
    Kind regards,
    Harika N

Maybe you are looking for