ECC allow to create order from fully referenced Quate/Cont with Warning mes
Hi,
Problem- System shall allow to create as many sales order from the fully referenced quatation or contract with " WARNING MESSAGE".
i.e Let say I have a quatation of 100 Q. in ECC.
I want to create 15 sales order of 10 quantity each with the reference of above mentioned quatation of 100 Quantity. But the moment i reached to reference target quantity (100) is committed then system shall still allow me to create sales order but with Warning message. Warning message could be like "Taget quantity is already committed" from the quatation #. But system should not stop me to create more sales order from that quatation of 100 quantity.
Looking forward your valuable inputs in this context. Appreciate your effort and time
Hi,
This is a standard functionality in SAP.
Go to your Quotation to Sales order copy control IMG setting. Tx: VTAA
There select your relevant Copy control, go in to Item Level with the relevant Item Category.
Check whether you have maintained below settings.
Pos./neg. quantity = +
Update document flow = X
Check the "Completion Rule" specified in the item Category IMG Setting as well.
Then system will through a message, once your quotation quantity is reached.
Best regards,
Anupa
Similar Messages
-
Error while creating order from notification
Dear Experts,
I am getting error (No material number transferred(Message no. M3752)) when creating order from R3 notification. the material number not copied from screen to VIQMEL. This is only in few times, not all times. when i debug this, in VIQMEL-FEKNZ = X(Error Records Exist).
This is only for R3 notification. Also not in all times.
What is the problem?Thanks, I am creating notification thru IW21. form IW22 i am creating order. while creating is gives above error. in this case MATNR not saving in QMEL. even when i am saving in IW22 it's not saving. when i am creating order from IW22 it gives above ror. but it gives error some times only, not all the times. for the same equipment i created so many. some four times only i am getting this.
-
Create order from quote in background
Is there a badi or FM in CRM that anyone knows of that can be called from a program to create a follow up order from a quote?
Thanks.
CathyI found an FM that will work. CRM_AUC_ORDER_CREATE_WITH_REF
Eventhough it's for auctions, it creates a follow up order from my quote, just fine. -
We use B1WS to create drafts in the SAP system. Within SAP it is possible to create orders out of the drafts. Is it possible to create orders out of drafts over the webservice interface, too? Could you please give me an example?
Hi Sven,
it should be something like :
svcDraft.DraftsService myDraftSvc = new svcDraft.DraftsService();
svcDraft.MsgHeader oHeader = new svcDraft.MsgHeader();
oHeader.SessionID = SessionID;
oHeader.ServiceName = svcDraft.MsgHeaderServiceName.DraftsService;
oHeader.ServiceNameSpecified = true;
svcDraft.DocumentParams oDraftParams = new svcDraft.DocumentParams();
oDraftParams.DocEntry = DraftDocEntry;
oDraftParams.DocEntrySpecified = true;
myDraftSvc.MsgHeaderValue = oHeader;
myDraftSvc.GetByParams(oDraftParams);
myDraftSvc.SaveDraftToDocument();
untested
regards,
Maik -
How to create Analysis from two different subject areas with diff models
Hello,
I have problem with create analysis from two different areas with two different models (Model Star and Snowflakes) build in BI Admin tools.
First Model A = Subject Area A have one fact tables (with measures) and three dimensions tables (Model Star)
Second Model B = Subject Area B have one fact table (no measures) and five dimensions tables (Model Snowflakes).
I'm looking solutions how I can give good results. In this case I can't use UNION, INTERSECT etc., because this models haven't the same number column and data type?
whether it is possible to do in OBIEE?
Please help me
Kind regard
robixHi
One thing to understand is that if your are imagining having two Subject Areas (SAs) displayed and then dragging columns from each into your Request without any preparation, then no, that can't be done. You would need to do a join in the BMM layer and expose the column from the second Subject Area in the presentation layer.
But if you indeed interested in UNION (or intersect) queries, then do this:
Build your first query in the first SA in the usual manner. Note the number of columns and the data types of each column.
Now at the bottom of the Criteria workspace, there is a button called "Combine with similar request." Click it.
Select your second SA. You will note that the outlines of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
Once you select your columns and your filters, click on result. (Oh, you will also need to decide what kind of combination you want -- click on the dropdown.) The result will be a new Request that has data from both SAs in the query and combined in the manner you select (union, intersect, etc.)
That should give you a start.
http://obiee101.blogspot.in/2010/08/obiee-combine-with-similar-request.html -- Read this link this is good one to understand with screen shots. -- OBIEE 10g
http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html -- OBIEE 11g
Award Points it is useful.
Thanks
satya -
Mailbox Move from 2010 to 2013 Completed with Warning and Stuck
I have been moving mailboxes from Exchange 2010 to Exchange 2013 and was on my last batch when all the mailboxes Completed except for one which Completed With Warning. It shows 0 bad items.
In Exchange 2010, all the mailboxes that are part of this failed batch show they are still in the Move Request state.
On the mailbox in Exchange 2013 Migration that shows Completed with Warning, the following details are provided:
Error:
MigrationPermanentException: Warning: Target mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible. Error details: The process failed to get the correct
properties. --> MapiExceptionTimeout: Unable to get properties on object. (hr=0x80040401, ec=-2147220479) Diagnostic context: Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=342] Lid: 43559
EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x80040401][length=178][latency=60009] Lid: 32881 StoreEc: 0x80040401 Lid: 50035 Lid: 64625 StoreEc: 0x80040401
Lid: 52176 ClientVersion: 15.0.847.32 Lid: 50032 ServerVersion: 15.0.847.6032 Lid: 50128 Lid: 1494 ---- Remote Context Beg ----
Lid: 43632 StoreEc: 0x80040401 Lid: 42272 StoreEc: 0x80040401 Lid: 36392 dwParam: 0x1 Lid: 50904 StoreEc: 0x80040401 Lid: 35992
StoreEc: 0x80040401 Lid: 1750 ---- Remote Context End ---- Lid: 1494 ---- Remote Context Beg ---- Lid: 43632 StoreEc: 0x80040401
Lid: 42272 StoreEc: 0x80040401 Lid: 36392 dwParam: 0x1 Lid: 50904 StoreEc: 0x80040401 Lid: 35992 StoreEc: 0x80040401 Lid: 1750
---- Remote Context End ---- Lid: 50288 Lid: 23354 StoreEc: 0x80040401 Lid: 25913 Lid: 21817 ROP Failure: 0x80040401
Lid: 20385 Lid: 28577 StoreEc: 0x80040401 Lid: 32001 Lid: 29953 StoreEc: 0x80040401 Lid: 62128 Lid: 38144
StoreEc: 0x80040401
Report:
[email protected]
Any idea what steps to take to complete this move from here?
Thanks,
Brett Gibson
Brett GibsonFrom the EMC on the Exchange 2013 (destination) I get:
DisplayName StatusDetail TotalMailboxSize
TotalArchiveSize PercentComple
Jason Osborne Completed 6.029 GB (6,474,008,69...
100
Brent R. Holl Completed 4.102 GB (4,403,992,89...
100
Nathan Harsin Completed 3.321 GB (3,565,830,88...
100
Don Barrett Completed 11.1 GB (11,916,695,17...
100
Larry Michael Completed 3.705 GB (3,978,717,79...
100
Danyl Gonterman Completed 4.165 GB (4,471,791,08...
100
Jason Mullanix Completed 1.569 GB (1,684,906,68...
100
Eric Brown Completed 5.662 GB (6,079,329,50...
100
Nick Cacciola Completed 1.992 GB (2,139,080,78...
100
Dorothy M. Jones Completed 11.34 GB (12,181,530,1...
100
orders Completed 3.632 GB (3,899,673,39...
100
Terrie Bumpus Completed 14.2 GB (15,249,956,21...
100
Sean Stepp Completed 2.55 GB (2,738,494,989...
100
Joshua Stolberg Completed 3.055 GB (3,280,581,92...
100
Josh Stremme Completed 2.571 GB (2,761,019,42...
100
Casey Jones Completed 1.614 GB (1,732,737,86...
100
Larry Gray Completed 2.545 GB (2,732,725,42...
100
Kelly Gray Completed 1.91 GB (2,050,883,915...
100
Bill Daugherty Completed 5.993 GB (6,434,784,87...
100
Laura Billstrom Completed 1.343 GB (1,442,466,39...
100
Adam Yates Completed 1.14 GB (1,224,119,328...
100
Eli Malooley Completed 606.8 MB (636,282,187 ...
100
Chad Ayers Completed 1.213 GB (1,302,645,29...
100
Nick Galvin Completed 815.9 MB (855,568,875 ...
100
Stephane Martin Completed 556.4 MB (583,443,766 ...
100
Todd Neal Completed 222.5 MB (233,256,684 ...
100
Eric Botsford Completed 17.13 MB (17,962,734 b...
100
Archiving CompletedWithWarnings 138.6 GB (148,830,505,...
100
Running the same command on the source Exchange 2010 Server I get the following:
[PS] C:\Windows\system32>Get-MoveRequest |Get-MoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (0:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (1:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (2:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : F4AB2B5B,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (3:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (4:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (5:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (6:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (7:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (8:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (9:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (10:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (11:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (12:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (13:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (14:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (15:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (16:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (17:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (18:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (19:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (20:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (21:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (22:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (23:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (24:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (25:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (26:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (27:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Thanks,
Brett
Brett Gibson -
Standard function- create order from contract.
Hi Experts,
Is there any standard function module which create a followup sales order(TA) for sales contract (QCTR).
Regards,
RahulHi,
The release order means the PO item created with reference to the contract item. There can be multiple items in the PO in which some items can be with reference to contract - these items eventually becomes the release orders and other items can be without reference to contract.
In short, you can add multiple items in PO where some items can be with reference to contract item and some are not. This is standard behavior.
Regards,
AKPT -
Create waveform from a set of points with differtent time intervals
Hello,
I would like to create a waveform from a set of points like this
Time Data
0 0
0,5 1
0,6 2
1 1
2 0
5 1
The problem is that the time interval between each points are not the same.
The only idea I found was to create a waveform for each doublet of points with the same rate (100ms) and than to append them together.
Does anybody have a better idea?
Regards,
Risotto.If you use a Wave From data type, re-sampling is not required.
When using a WF datatype the chart (graph) will pick-up the X value from the t0 of the waveform.
The trick is to just build an array of the single update value and make sure the t0 value is correct.
Re-create this example
and try it for yourself.
Ben
Note: make sure the data you pass is consistant with the data already displayed. If you post a t0 value that is older than what is already displayed, the chart will clear the display and start over.
Message Edited by Ben on 09-15-2006 11:49 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
WF_Datatype.JPG 59 KB -
Why does Create PDF from Web Page not work with certain URLs?
I'm creating a large number of PDFs from Web Pages on Adobe Acrobat XI Pro and occasionally come across certain URLs that fail to generate a web page. The process begins as normal but eventually the status window lists a few errors or canceled processes and that there are now 0 Connections Active. This only occurs for certain URLs, but when it happens it consistently fails for that URL (as in trying it a few mroe times doesn't let it work). Is there any specific reason this happens or a way I can prevent it? The above example is of a URL that fails to generate a PDF :
http://www.pcmag.com/encyclopedia_term/0,1237,t=access+point&i=37393,00.aspI tested this in Acrobat X and the exact same issue occurs
http://www.quantumdynamix.net/clients/image-map-test/ImageMapTest-AcrobatX.pdf
This has to be considered a legatimate bug, especially since IMAGE MAPS is listes as one of the supported HTML features via the help files -
Replication of Sales Order from SAP ECC to SAP CRM
Hi,
The scenario I am working on is breifly as under:
Telesales will create sales order directly in ECC. The sales order created in ECC will be replicated in CRM. I have some queries and request guidance:
1. The same sales order type will be used by ECC for creating orders from telesales, as well as regular sales orders in ECC. I need to replicate only sales orders created by telesales. Please guide how to achieve the scenario requirement.
2. There are many 'Z' Partner function in ECC in sales order, some of them are mandatory and others are optional. During replication, if the 'Z' partner functions are not created and maintained in CRM, what will be the impact? Will the sales order replicate or no. Impact in sales order replication of mandatory partner function and optional partner function not available in CRM.
3. Impact of 'Y' and 'Z' condition type (optional) not maintained / imported from ECC to CRM in sales orders.
Regards,
Rajesh1. In R3AC1 set filter according to your needs for object SALESORDER. There are quite a few fields on which you can set filter.
2. Partner functions will not affest replication. Replication is more strict from CRM to ERP hen viceversa. Also you said that optinal partner functons will be missing, so there is no reason that problems should accore. But of course standard sold-to party and shi-to party should be provided for pricing reasons.
3. Should reprsent not problem, but pricing procedures must be synchronized between both systems. -
Creating sales order from contract ISA R/3 Edition
Hi Forum,
Our scenario are
1 - customer select product from catalog and place order from internet
2 - sometimes, customer already have a contract with us (created earlier manually on SAP) and want to create sales order from internet referencing a SAP-contract.
For scenario No.1 - we can use standard SAP
For scenario No.2 - is there any standard way to do so? or we have to do customization?
Any suggestion are welcome.
Thanks a million.!!Hello
"Contract Processing" is not supported out-of-the-box in ISA R/3 edition.
However, you have a good news. The OSS Note [788245 |https://service.sap.com/sap/support/notes/788245]- "ISA R/3 4.0: contract processing", explains how to implement this feature on a project basis.
We have implemented this feature successfully at few customers.
Hope this helps.
Easwar
http://www.parxlns.com -
Create a notification order from IW22 versus IW28
When I create a notification order from a notification from IW28, I click the "Create Order" button and it takes me into IW34 where I can enter the Order Type.
When I go into the notification(IW22) from IW28 and click create order from IW22, the popup only shows me "PLanning plant" and "Main work center". When I continue I get an error stating that the order type is not maintained.
Is there somewhere in the IMG where I need to put order type on the popup to create a notification order from IW22?
Please let me know if this is confusing.
Thanks
JaydenHi Jayden,
if you use for every notification type exactely one order type, you should define this in IMG in step "Order Type by Notification Type (goto Maintenance and Service Processing / Maintenance and Service Notification / Notification Creation / Notification Types / Assign Notification Types to Order Types.
I've checked your problem in our system and all things runs well, from IW22 the same like IW28.
One question: If you called IW28 you get a list with notifications, right? Why do you open as first the notification and create than the order? The easy way is to create the order direct from list by mark the notification and click on button "Order" (with the blank paper) in Top of the screen.
Jens -
Creating maintenance order from enhancement IMRC001
Hi
I am trying to create a maintenance order from the customer exit EXIT_SAPLIMR0_001 inside enhancement IMRC001. For order creation i have invoked the BAPIs BAPI_ALM_ORDER_MAINTAIN and bapi_transaction_commit subsequently to write changes to the database. But once the control returns from main program I receive an express message which states
Update was terminated
System ID.... ECD
Client....... 400
User..... SSEN
Transaction.. CO11N
Update key... 48DCDEE6DD6E01AFE1008000093362E1
Generated.... 15.10.2008, 09:11:42
Completed.... 15.10.2008, 09:11:43
Error Info... 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Can any of you help me on this. I am doubtful on commiting from a include; but in the doc for this enhancement it is mentioned that we can create order from it. Is there any other way to do this?
Thanks in advance
Sudipudip,
I think there's some sample code with this user-exit..
Have a look at that, it may give some pointers...
Also try without the BAPI_TRANSACTION_COMMIT.
PeteA -
Create Purchasing Order from Purchasing Requisition
Hi,
I need to create in a report a Purchasing Order from Purchasing Requisition. I have seen the Bapi BAPI_PO_CREATE; Can I create order from requisition without fill all field and only
the requisition and ther obligatory field?
Thanks
FrancescoHi
Try out what all parameters are obligatory in case of Purchase Requsition using the FM - 'BAPI_REQUISITION_CREATE' in R/3 back-end..
and then try creating PO using 'BAPI_PO_CREATE1' or 'BAPI_PO_CREATE' Function modules.
Also try creating P Req manually using ME51N / ME51 Transactions and debug the process to get further details, if any.
Regards
- Atul -
Attaching a PDF document to an order from Web
Hi,
We have a requirement to attached a PDF document to an order in SAP from a web front end (its a custom web application written in cold fusion). We currently create orders from this web application which talks to SAP via XI. I know that using the "Services For Object" option in SAP GUI we can upload external document. Is there a BAPI that can be used to send the document from WEB to be added as an attachment on the order?
Any response will be greatly appreciated.
Thanks,
PareshHi Tom,
ArchiveLink is a service integrated in the SAP Web Application Server for linking archived documents and the application documents entered in the SAP system.
Linking documents according to content guarantees long term easy access to the documents. From the screen of the application document, you can directly display the stored document that is associated with it. You can also use attributes to search for documents. This replaces time consuming processes such as making copies of originals, searching for procedure-related information, etc.
There would definitely be content repository which will be connected to SAP through archivelink. Pls confirm the same with Basis.
You can look at the customizing through
IMG->SAP Web Application Server -> Basis Services -> ArchiveLink
Also pls refer to:
http://help.sap.com/saphelp_47x200/helpdata/en/16/56a539a908455de10000000a114084/frameset.htm
Pls award if helpful.
Reg
Sachin
Maybe you are looking for
-
Brand new ipod touch won't display home page
Hi Folks Just bought 2 new Ipod Touch's for the kids for xmas. One turns on fine and went straight to the home page and allowed me to personalise it but the other one starts up and just displays a picture of the USB cable and an upward arrow pointing
-
My Iphone 4s is stuck in recovery mode and is not being recognized by Itunes.
I've tried updating my itunes, restarting my computer and nothing seems to be working. My phone is stuck with the itunes logo and the cable telling me to plug it in. ive tried everything but nothing seems to be working.
-
Cannot connect to the network after fresh install
Hello everyone. So I followed the Beginner's Guide to the letter during setup. Everything was all peachy, including the network (since I used the FTP/HTTP ISO to install Arch Linux). My NIC got assigned an IP address from my router via DHCP. However,
-
Hey all, We use Novell Groupwise for exchange. One of the people at our organization has been having issues since he got the phone. Apparently, several events from his calendar are being deleted in the span of a minute on occasion. When I go in hi
-
I bought my first Mac in february and I love everything about it. that said, I've been trying to get my hands on as much software as possible and I'm interested in learning about xCode. is there somewhere I can get started, right from scratch? I don'