ECC and CRm Connectivity

Hey all,
I've been working according the best practices
CRM Replication
Building Block Configuration Guide
to connect an IDES CRM 4 to and IDES R3.
After many problems the connection between the systems is working and data is replicating,
but there are some problems because those are IDES systems and there is already data in the systems I get some errors, that I don't know how to deal with.
In Tx. SMW01 I can see the following errors:
1. For the MATERIAL queue:
a. EAN 2348789098765432 does not correspond to the GTIN format and cannot be transferred
b. Plant 1000 is not assigned to any location
2. For the Customer_Main queue:
Customer number 403740 is already assigned to a business partner
Technical error occurred (4)
3. For the sales queue:
   Processing of document with Guid 4B683CC54CC25C498F0113CC4A211F16 is canceled
   Business transaction type SO does not exist
   Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
How can I fix those errors, its look like customizing errors...
Thanks alot
Natti.

Hi,
Any update onthe above issue. I am also facing the same problem.
Regards,
Khan

Similar Messages

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

Optimize the performance of the RFC call between ECC and CRM

Hi,
We are planning to extract sales orders, sales activites and service orders to dispaly it on the PDF factsheet of the account.
As of now, the PDF factsheet takes a long time to retrieve the data from ECC to CRM. Can you please suggest us on ways to optimize the performance of the RFC call between ECC and CRM.
Thanks in advance,
Vamsi.

Hello,
[SAP Note 636906 |https://service.sap.com/sap/support/notes/636906]is quite useful here.
Many times, the performance is poor due to function module CRM_CCKPT_EXPORTSUMMARY. This function module gets the customer number, the sales organization and the fact sheet view. If in CRM customizing, you use complete view (001), then all the views in ERP including all the info blocks will be retrieved, which will cause performance issue.
To solve the issue, please use a limited view to retrieve the data from ERP - especially a view, which does not contain info block 013.
Hope it helps
Joaquin

Replication of Pricing Conditions between ECC and CRM

Hi All
I have a couple of queries regarding replication of pricing information between ECC_CRM. We maintain the filter settings for Pricing procedures, access sequences and condition types in the object DNL_CUST_CND_PR, and accordingly these are replicated from ECC to CRM. My Questions:
1. If some pricing procedure is created in CRM and this needs to be replicated to ECC, Can we achieve this?
2. Would DELTA be active on these objects, in the sense if some changes are made to a pricing procedure in ECC, would they flow automatically to CRM?
Thanks in advance
Best Regards,
Ram Sushanth

Hi Chandra and Swaroop
Thanks a lot for your response.
From your replies, now, this is my understanding (Pl correct me if am wrong)
1. Replication of Pricing Procedure from CRM to ECC is possible.
It would be of great help if you could elaborate on the procedure to do so or provide pointers for documentation in this regard.
Because, for replication from ECC to CRM, we perform an initial load on the object DNL_CND_CUST_PR or DNL_CUST_CNDALL.What is the object that we need to execute from replication from CRM to ECC?
2. DELTA would be active only on condition records, but not on Condition types and Pricing Procedures and if any pricing procedure is changed in ECC, we would need to perform Initial Load again.
Thanks in advance
Best Regards
Ram Sushanth

Vendor Number Range Conflict SAP ECC and CRM 2007

I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts). What is the best approach to dealing with this issue...
My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
eg SAP Vendor "50000001" equates to CRM "VEN50000001"
Is such as approach supported? Can you point me to the documentation that shows how such an approach could be implemented. What approaches have others done to address similar issues?
Thanks in advance
Eddie
By the way we are on CRM 2007 sp4

Hi Eddie,
SAP Note 1044637 - Customize Vendor Numbers
Implement the code present in the attachment. You can
change it according to your own requirements. The example code
suffixes 'VEND' before the first six digits of the vendor
number before it is downloaded to CRM.
Thanks,
Vaibhav Shah

ECC and SCM connection

Hi folks,
i would like to see ECC and SCM scenarios connected by CIF, how ever HU2(ECC) and HU8 (SCM) systems are not interconnected. let us know whom do we need to contact in this regard.
Thanks in Advance ...

Hi Amit,
The ES (emphasis on Enterprise Service or Web Service) Workplace Systems are actually setup for customers or consultants to test drive SAP delivered Enterprise Services, so it stands to reason that integration between these systems would be using web services / SAP Enterprise services for the most part.
Trying to contact someone to configure CIF / ALE integration between HU2 and HU8 is not going to work for you.
Regards, Trevor

Are the Tcodes which we use for work flow are same in ecc and crm

Are the Tcodes which we use for work flow are same in ecc and crm

Yes they are! the same enjoy!
Regards
Tatenda I H Chaibva!

Error while testing ECC and Portal-Connect to SAP gateway failed

Dear Experts,
While testing ABAP connection in Portal i am getting below error.

Dear All,
My error is rectified with below thread.
SLDCHECK: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMIT'...
Hi,
You need to create an RFC to the SLDCHECK:
1. In your web browser, enter the URL of SAP NetWeaver Administrator using the following pattern:
http://<host>:<port>/nwa
2. Choose Configuration Management u2192 Infrastructure u2192 Jco RFC Provider.
3. Choose Create.
4. Enter the connection and transport parameters as required.
Field
Description
Program ID
We recommend that you use the following pattern: SLDAPI_<SAPSID>, where SAPSID is the system identifier of the AS Java system.
Gateway host
Gateway service
If your AS Java is an add-on installation to an ABAP system, use the gateway of the ABAP system. You can look up the gateway parameters of an ABAP system using transaction SMGW.
If your AS Java is a standalone installation, we recommend using a gateway on the Central Services Instance host. As of SAP NetWeaver 7.1, usage type AS Java that comprises SLD also contains an SAP RFC Gateway.
Server Count (1..20)
Enter 3.
5. Choose Next.
6. Enter logon data to the ABAP repository. You can either use an existing RFC destination from SAP NetWeaver Administrator u2192 Configuration Management u2192 Security u2192 Destinations or you specify the ABAP repository explicitly. The destination should point preferably to an AS ABAP close to SLD. If SLD is running on an AS Java standalone installation, the calling AS ABAP can be used instead. We recommend to create and use an RFC destination instead of explicitly specifying the connect parameters here. In both cases, the following parameters are required
Field
Description
System Landscape Directory 15
User Manual 03.04.2008
Application Server Host
System Number
Client
Language
User
Password
Enter the logon data for the AS ABAP system. You must specify an existing user with appropriate authorizations for RFC.
If you are running a system with both usage types AS ABAP and AS Java, use the logon data for this system.
If your AS Java is a standalone installation, use the logon data for the calling ABAP system.
7. Choose Next.
8. Leave the default values in the next steps.
9. Create the Jco RFC destination by choosing Finish.
Result
The Jco RFC destination creates a number of u201CServer Countu201D RFC server threads on your AS Java. These RFC servers register at the RFC Gateway specified. You may configure multiple ABAP systems to connect to these RFC servers. In this case, the Server Count should be increased when TIME_OUT exceptions are observed.
Creating an RFC Destination for the SLD ABAP API on the AS ABAP Side
Use
If you want to configure an ABAP application to access data in the SLD through the SLD ABAP API, you have to create an RFC destination on the ABAP system side.
Prerequisites
An RFC destination for the SLD ABAP API is created on the AS Java side.
Procedure
1. Call transaction SM59.
2. Select TCP/IP connections and choose Create.
3. In the RFC Destination field, enter SAPSLDAPI.
4. On the Technical Settings tab page, select the Registered Server Program indicator.
5. In the Program ID field, enter the same program ID as the one you entered when you created an RFC destination for the SLD ABAP API on the AS Java side. We recommend that you use the following pattern: SLDAPI_<SAPSID>, where SAPSID is the system identifier of the AS Java system.
6. Choose MDMP & Unicode and select the Unicode indicator.
7. Choose Save.
8. Test the RFC destination by choosing Connection Test.
If the display shows the response times, you have configured the RFC destination correctly.

CDB and CRM Connectivity

Hi there
Could you pl help me how to configure CRM and CDB Mobile for brand new implementation. It would be appreciated if you could send me a building block, guide or notes. Thanks in advance.
Thanks
Ram
Edited by: Ramboo on Jan 15, 2010 3:48 AM
Edited by: Ramboo on Jan 15, 2010 3:51 AM

Hi,
Any update onthe above issue. I am also facing the same problem.
Regards,
Khan

Changing sales order status in ECC and CRM simultaneously

I am creating a sales order in CRM 2007 system, at the same time i am creating a trading contract for the same order in ECC system. My requirement is, when i change the status of order in ECC, it should reflect back in the CRM system. Please give some help in this issue. Is there any BAPI/BADI which can be helpfull to solve this.

hi,
If u found out the bapi/badi for ur requirement,please do reply bcoz i got the same requirement.
Thanks in advance,
Srinivas.
Edited by: srinivasa reddy mallidi on Feb 3, 2009 3:04 PM
Edited by: srinivasa reddy mallidi on Feb 3, 2009 3:04 PM

BI - ECC / CRM Connectivity

Hi Everyone,
For the fresh SAP BI installation, I plan to install ECC and BI on the SAME instance but different client.
CRM is to be installed on separate box.
Can BI be connected to both ECC and CRM in this landscape?
-Amit Dhasmana

Hi Amit,
welcome to SDN!!!!!!
Check here.
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Thanks,
Vijay.

Mapping table for contact person download from ECC and Groupware

There are 3 connected system in our landscape:
- CRM
- Groupware (connected to CRM)
- ECC
We have a requirement that the Contact Person can be created in any of the above 3 system and should flow to the other. So, the below scenarios are valid in our case:
1. Contact created in Groupware, flows to CRM ->ECC
2. Contact created in ECC flows to CRM-> Groupware
3. Contact created in CRM flows to Groupware and ECC
Our flow system works fine and the contacts created in one system, flows to the other 3 and any changes also flow.
The problem is that for the contacts created in ECC, the communication data (phone, email etc) flow in CRM and get updated in the "Work Address" section in the Contact display screen in Web UI and the updates from Groupware for communication data gets updated in "Main Address" section.
Can anyone please advise what are the mapping tables for the address update when the contact is created in :
- Groupware/CRM
- ECC
Regards

Hi Christophe,
Thanks for the response.
I checked for the notes you suggested, but having read it it doesnt appear to address my problem. Did you get this from SAP as fix to solve' specify the name of contact person' error in SMW01 ? Unfortunately even SAP isnt replying to me on this.
I am also not getting any dump, all my queues are getting cleared in ECC and CRM. My error remains 'specify the name of contact person'. Interestingly when i tried to push the contact person directly as bupa_main..it too failed with the same error..more interestingly whenver my contact person tried to get replicated as bupa_rel..ecc does eat up a number assignment..but no record is created for it in ecc...the smw01 says partiaslly send ..receivers has error..
Edited by: Hamed Kazi on Apr 19, 2011 2:33 AM

Replication of Quotations from ECC to CRM

Hello Experts,
The scenario is as follows:
I am required to replicate all the quotations from ECC to CRM.
My question is: what are the various middleware settings to be done?
I have created a transaction type for quotation by the same name in ECC and CRM so far.
It would be great if I can get help on the following:
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
2.What action profile do I need to maintain on ECC and CRM side for quotation?
3.How should the number ranges be defined on ECC and CRM side for quotation?
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
What more needs to be done?
Once the settings are complete and fool-proof, I know I can run an Initial Load (R3AS) on the object: SALESDOCUMENT from R/3 to CRM.
What are the filter settings to be maintained in SalesDocument Object?
Experts, this is my requirement and all the pointers would be greatly helpful.
Many thanks,
VSK.
Edited by: venkatskumar on Feb 16, 2011 12:17 AM

Hello
Please find below my reply :-
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
>> You can make a Z copy of the standard Quotation Item categories in ECC and CRM.
2.What action profile do I need to maintain on ECC and CRM side for quotation?
>> Action profile settings are specific to your business scenario. You need to define ACTION Profile in ECC. In CRM you can have an ACTION PROFILE and assign it to the CRM Transaction Type
3.How should the number ranges be defined on ECC and CRM side for quotation?
>> If ECC is a leading system for quotation creation, the number range will be EXTERNAL in CRM and assign this EXTERNAL number range for CRM Quotation Transaction Type
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
>> Yes
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
>> Not sure on this. Requesting other experts to answer this.
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
>> Yes. The master data such as Material, Customer, Pricing should be downloaded to CRM, if the quotation needs to be replicated to CRM.
Hope this will be helpful.
Regards

Replication of Customer from ECC to CRM --- Multiple A/c Groups

Hi Experts,
I am trying to replicate customer master data from ECC6.0 to CRM7.0 and vice versa. Replication is up and running right now for only one Account Group (GEN-Z created for business) in ECC.This A/C Group (GEN) is mapped to BP Classification "Customer" in PIDE.
Now, I want to replicate customers with 5 other A/c groups to CRM as well. In PIDE, I have maintained a total of 6 entries for a/c groups to classifications (ECC to CRM). All 6 A/c groups are mapped to "Customer" classification.
This "customer" classification generates customers in role "Sold-to-party". For STP role mandatory fields have been matched to GEN A/c Group.
My main issue is how do I make sure there is no mismatch of customer fields in ECC and CRM as All other a/c groups that have also been mapped to the same "Customer" classification in the same way as A/c Group GEN. Problem would crop up because, there are diff set of fields kept mandatory for different a/c groups.
From CRM to ECC, I can select the relevant a/c group from "Classification" tab in role Sold-to-party.
But, there would be the same problem of mismatch of mandatory fields between Sold-to-party and all other a/c groups.
Is there a solution to this problem. How can I make sure replication works for multiple A/C Groups too.
Thanks and Regards
Varun Taneja

Hi Robert,
I read that in some other post too, it worked for someone. But here it is, I would like some advice from you...
Suppose, I have 2 A/c Groups... X and Y, both with different mandatory field settings in ECC.
Now, In BP field grouping on CRM side, I have made field settings(mandatory etc.) according to X A/C group. So when I select, X from classification tab during BP creation, replication would be successful.
And, if I select Y from classification tab, it would give an error "Fill in required mandatory fields" since fields have not been synchronized with Y. How can I take care of this issue.
Also, for ECC to CRM, how do I select multiple classifications, it doesn't allow for more than one entry for one classification.
I hope I am clear about my requirement.
Please share your feedback.
Thanks and Regards
Varun Taneja

Replication of Material Sales status (with user values) from ECC to CRM

Hi all,
I 'm trying to find out how to replicate the sales statuses of the material master data in ECC (in view "sales", field DChain spec. status, MKVE-VMSTA) to the Material SAles statuses in CRM.
The sales statuses in ECC have been maintained (via menu SPRO/logistics general/master data/basic settings/settings for key fields/DAta relevant to sales and distribution)) : new specific values have been added to the standard ones.
Then, this customizing has been replicated to CRM via the DNL_CUST_PROD3 repliction object ( table TVMS).
I have also created a user status profile with values in CRM with the same values, and assigned with the configurator the status profile to the screen, so the values are selectable in the sales status in CRM (in header).
But, now, how can i replicate the sales statuses of the ECC materials to either :
-the product status (header) in CRM, or
-the sales status (distribution chain specific) in the assignment block of the Distribution-chain specific data ?
Is a specific development needed?
there are some existing notes (623026, 428989, 495764), but not clear about what is possible in terms of replication of statuses
thanks a lot

It seems that there is no mapping between ECC and CRM sales area.
If u want to download customer from ECC for that u have to mention the customer sales area in to the filter and then u have to start down load from ECC.

ECC and CRm Connectivity

Similar Messages

Maybe you are looking for