Ecc and ides?

what is the full form of ecc and ides?..what is the difference ?how can i get it installed in my pc.?i am new into sap mm..

Hi,
SAP ERP is the application in which ECC is one of the installable unit of. ECC means ERP Central Components. It is basically what was included in the SAP R/3 4.7 with additional new functionality.
- ECC 5.0 is part of SAP ERP 2004
- ECC 6.0 is part of SAP ERP 6.0 (previously called 2005)
More information can be found at http://service.sap.com/ERP and http://service.sap.com/instguides (navigate to the SAP ERP master guide).
IDES is the name given to a learning systems provided by SAP. It means "International Demo and Education System". These systems include sample data, configurations and step-by-step guides for learning and demoing to business users. There are IDES versions for most SAP applications like SAP ERP, SAP CRM and SAP NetWeaver.
IDES applications are available for customers who have the applicable application license (SAP ERP customer can order SAP ERP IDES free of charge).
more information can be found at http://service.sap.com/IDES.
You can install most SAP applications on a super-sized PC if you down-tune the applications. As you mention Material Management (MM) the best option is probably to get your company to order and install SAP ERP IDES for you to learn on. Install of SAP applications requires a lot of SAP technical knowledge.
I hope this helps,
Mike.

Similar Messages

BI 7.0 and ECC 6 IDES

We have connected the BI 7.0 and in the source system defined a new ECC IDES system as the source and replicated .
But when the Extraction is done , no IDOCS are generated to the IDES ECC system no errors.
By the way the ECC 6 IDES has BI content activated for client 800.
Is that the issue , can we deactivate the BI content in IDES ecc so it can work as source for extraction to BI.

let me ask it some other way .
1. ecc 6.0 with bi enabled , connected to bi 7.0 system does this work ?

IDocs have disappeared between ECC and PI

Hi All,
A couple of days ago 3 idocs went missing between ECC and PI.
That day 293 idocs of the same message type were sent to the same partner through PI. In PI we only found 290. The 3 IDocs were sent in the same second in the early afternoon. All IDocs before and after were processed correctly.
The IDocs are unknown in IDX5 and in Runtime Workbench on PI.
The idocs were not in SM58.
I found them in WE05, with the correct status. The status update from status = 01 to 30 to 03 took place in the same second.
25 seconds later, new IDocs of the same message type were created and processed successfully by PI.
At the time the idocs disappeared there were no problems with either ECC or PI, as far as we know.
The interface is live for more than 2 years. In the meantime no changes have taken place.
I have read the links below
Finding missing IDocs
Interface Troubleshooting Basics
It's a mystery to me. Where have those idocs gone?
Anybody any idea?
Kind Regards
Edmond Paulussen

Hi Edmond,
On the SAP PI system have a look in transaction IDX5. Take the IDoc number that you could not find in PI and search them in IDX5.
If you cannot find those IDoc in IDX5 then they never reached PI.
Regards,
Jannus Botha

Error when installing Ecc5.0 and IDES Ecc5.0

Hi all,
I tried to install Ecc5.0 and IDES ECC5.0 on same server( windows 2003,and Oracle9i),but when installing ECC5.0 after successfully install IDES Ecc5.0,used following two cases, there are errors.
Case one:
install IDES and ECC on different SAP system:
step one: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs central instance on both systems, T13 and T14, from DVD 51031149
Step two: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs database instance on T13, select IDES export DVDs(DVD 51031332) during the installation process, installation successfully.
Step 3: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs database instance on T14, select ERP 2004 export DVDs(DVD 51031867) during the installation process, there is error when installation went to Oracle database Load with something like name alreay in the database.
Case two:install IDES and ECC on same SAP system:
Base on the above error, I tried to install ECC database instance on T13 again with diffrent Schema ID from IEDS database instance.
still there is an error like "connect with sql failed, error # 257".
Could any one help me?
I ever successfully installed ECC5.0 without IDES

Pls let us know that could you able to install ECC5 IDES, if yes pls give EXPORT material no.
Thanks
Vijay

ECC and HANA

Hi,
I have seen a no. of documents about HANA and BW. HOwever there is not anything available about relation between ECC and HANA.
Will HANA replacing ECC? If notis it interface between ECC and BW as I undertsand (may be wrong) that BW is still going to be there?
Can anyone please explain?
Regards
No.One

HANA 1.0 was release with the view of performgin real-time replication from various SAP and non-SAP sources.
HANA 1.0 SP03 is now available - we see the BW application running on the HANA database. (ECC connected to BW as it is, but the underlying database is HANA)
Going forward, we will see HANA 2.0, where in ECC and BW may share a common HANA database.
As far as HANA being a replacement of ECC is concerned, i think the idea is too far-fetched.
There have been discussino on HANA replacing BW in the long run, but this we do not know.
As of now, there is no replacing BW or ECC.
HANA is being used for real-time replication and as a database for BW.

Mixing ECC and NECC (Non-ECC) RAM Modules

Hi,
I have a G5 Dual Core 2.0 with a pair of 512Mb Non-ECC (NECC) RAM installed and I want to upgrade to 3Gb. I'm thinking of getting 2Gb ECC modules and discarding the 1Mb NECC installed. But I came across a phrase in the Apple Manual of my G5 that states "DO NOT MIX ECC and NON-ECC Memory Modules WITHIN A PAIR." Does that mean I can mix ECC and NECC within Memory Banks and NOT within a PAIR? Because in that case I won't have to discard my NECC 1Gb and have a mixed 3Gb Memory!? I'm afraid to actually try it so I would appreciate your insights. Thanks much.
G5 Dual Core 2.0 Mac OS X (10.4.7)

Yes. You can mix ECC and nonECC as long as you don't pair the ECC with the nonECC. The computer will just treat all RAM as nonECC.
You can keep the original memory as long as the two 512MB DIMMs are always paired with each other.

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

Same MessageID from sender(Webservice) -- PI -- ECC and vice versa

Folks,
We have a sender and receiver webserver which has its own monitoring system in it and it tracks messages by means of Message ID which it creates .
Now this web service when hits PI it sends the message ID in a field in payload.
The message ID which the webservice sends is now different then which is created in PI as the message propagates
The same message ID is created in ECC as we all know .
Now Our problem is we are finding it difficult to track messages from webservice Outbound as well as inbound
If there are 100 messages we have to search on the basis of time only , we cant search on message ID
My question is can we have a unique message ID throughout the scenario.
( i.e webservice -- PI-- ECC and ECC -- PI --Webservice)
Please help
thanks
Ninad

Thanks Gouri ,
In case of webservice sender the webservice sends a message ID in a payload ( they have there own monitoring using there own message ID )
Being in Support , I get a call that message belonging to xxxxx message ID has failed. Now when I look in SXMB_MONI
I see 1000 messages between same sender and receiver.
I have to check payload and check the said message ID and then find the message , this is Cumbersome
hope we find some better approach
Thanks
Ninad

Configuration related to PO colabration in ECC and SNC

Hi
Can anybody throw light configuration related to PO colabration in ECC and SNC.
Regards
Raj

Hi Raj,
Below link provide you SNC information about Integration ECCPISNC and functionality of SNC
link http://help.sap.com/saphelp_snc70/helpdata/EN/b4/f20483605b0d4fa856354a986e900d/frameset.htm but if you want configuration document then Click on below link
http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
A07_BB_ConfigGuide_EN_DE.doc (Kanban processing)
S32_BB_ConfigGuide_EN_DE.doc (SCM setting)
S34_BB_ConfigGuide_EN_DE.doc (Supplier)
S55_BB_ConfigGuide_EN_DE.doc (Contract Manufacturing Procurement)
hope this documents are useful.
Thanks,
Nikhil

Call RFC from ECC and display the values in AET

Hi ALL,
I had an RFC in ECC ( Z_CRM_SPEC_DATA) this should be called into my AET Fields in getter method.
In getter method of tat AET field what code should i write?
Plz help me on this.

HI,
1) Call the RFC(Z_CRM_SPEC_DATA) from ECC and display the values as mentioned in below AET fields.
AET FIELDS :    zzfld00000M    zzfld00000N
Description :    Budget Quan    Forecast Quan
values         :    (--5.0)(6.0--
2) (Fetch Budget and Forecast data from ECC ),you would need to pass Material Number(MATNR) as well as Ship to party info to fetch the budget and forecast data as one material may be assigned to 2 or more SH with specific budget and forecast data for each.
Edited by: venkatabharathv on May 23, 2011 2:44 PM
Edited by: venkatabharathv on May 23, 2011 2:49 PM

Organization structure in CRM 7.0 from ECC and HR

Hi,
We are trying to download Org structures from ECC and HR. (CRM 7.0, HR & R/3 ECC 6.0)
From HR
The ALE distribution is set across the systems CRM and HR and I did the PFAL run as per the best practices BB C05. There are about 100,000 Idocs inbound to CRM system and out of which about 15K are in 51 status and the rest are in 53 status.
Observations:
The Organization structure from HR is not totally mapped in CRM but only a part of it is displayed in PPOMA_CRM.
The remaining Org units are found in 'non-related objects' selection.
All the Idocs in failure are in error "Error in subroutine read_namtb for structure of infotype ". When I go to the long text
Message no. 5-109
Diagnosis
An error has occurred in subroutine read_namtb for structure of infotype .
Procedure
Check the entry for infotype in table T777D (structure, IDoc segment, expanded structure) and the corresponding structures.
I am not sure which infotype needs to be checked in T777D.
From ECC
The CRM - ECC connectivity is set. Downloaded all the required customizing objects successfully. Switched the org model to "enhanced backend integration version " and then followed on to SPRO->CRM->Master Data->Organizational Management->Data transfer->Copy SAP ECC structure and selected all the available R/3 Organization assignments available and then selected the "generate selected lines".
Observations:
All the generated org units are in GREEN in SPRO but there are no assignments found in PPOMA_CRM not even in the unrelated objects
Checked tables HRP1000 and HRP1001 from the CRM Sales org unit IDs (ex: O 5000012) created here and they are not found but the generation is in GREEN.
I will appreciate any assistance I get here.
<< Moderator message - Everyone's problem is important >>
Regards,
DT
Edited by: Rob Burbank on Oct 20, 2010 4:25 PM

Hello DT,
Could you please let me know the process how the problem is solved..
even we are having the same issue like, we have downloaded the Org Model form HR to CRM system, till here it was fine.
when we are trying to download the ECC sales structure(CRMC_R3_ORG_GENERATE) to CRM system, i have selected all the items and triggered the Gerenerated Selectd Lines, but after all the items are generating in a error with RED.
Could you please share you knowledge, so that it will help me in figuring out the issue.
Thanks in Advance DT. Hope you reply back.
Regards,
Ven

I have 1428 songs in my itunes library and when i sync to my new iphone it only comes up with 1315 songs have tryed lots of ways but cant seem to get the other remaining songs to it ?? and ideas pls ?

hello need help pls bought a 4s and trasferd all my things across including my music but i am missing around 170 songs that wont snyc across ? have tryed taking all songs off and a few other things it seems to be songs that have been in playlists that wint work ? and ideas< cheers

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them.

No connection between ECC and PI

Hello,
I have developed proxy to file interface but I am not able to see any data flow between backend ECC and PI systems. I have gone through different blogs and forum threads to troubleshoot... creating RFC destinations, testing through RWB message, SLD configurations, SICF, etc. but I am not able to see any data going out of or into ECC. When I check SXMB_MONI or RWB message monitoring, I don't see any message either failed or success.
I don't think ECC is connecting to PI. I am able to create proxy in ECC and configure both inbound and outbound proxy but I don't see any data go through ECC. I am able to import RFC and IDocs in Integration Repository. Can anyone suggest what could be the problem and how to resolve it?
Thank you!

Hello,
I created a new test interface - File to RFC and tried to test it by sending payload from RWB and got the following error. I already checked that the host file has the server name and IP address entries.
Adapter Framework caught exception: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=HOSTNAME SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.131.3:sapgw30' not reached TIME Mon Sep 26 13:51:26 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 2
Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=hostname SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.131.3:sapgw30' not reached TIME Mon Sep 26 13:51:26 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 2 .

Vendor Number Range Conflict SAP ECC and CRM 2007

I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts). What is the best approach to dealing with this issue...
My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
eg SAP Vendor "50000001" equates to CRM "VEN50000001"
Is such as approach supported? Can you point me to the documentation that shows how such an approach could be implemented. What approaches have others done to address similar issues?
Thanks in advance
Eddie
By the way we are on CRM 2007 sp4

Hi Eddie,
SAP Note 1044637 - Customize Vendor Numbers
Implement the code present in the attachment. You can
change it according to your own requirements. The example code
suffixes 'VEND' before the first six digits of the vendor
number before it is downloaded to CRM.
Thanks,
Vaibhav Shah

Communication between ECC and SCM via XI

I am trying to set up the scenario 'Purchase_Order_Processing' between
ECC and SCM using XI. The SCM content for XI has been loaded into XI
and this scenario is included in the content.
We are running the following:
ECC - Version 5.0 - 640 SP level 12
XI - Version 3.0 - 640 SP Level 14
SCM - 4.10 - 640 SP Level 12
The connectivity between the systems has been set up as described in the configuration guides. On sending an IDOC (basic type ORDERS05) into XI I get the following error message 'Http server code 500 reason Internal Server Errorexplanation Error during parsing of SOAP header'.
The Error XML is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error
explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any assistance would be much appreciated.

Sravya,
Yes this an IDOC to http scenario. There was no dump at the receiver end. I've found out what was causing the problem - I was using an adapter type of HTTP. It should have been of type 'XI'. I've altered this and it works. Hopefully this will resolve your problem Vinod.
Richard

Ecc and ides?

Similar Messages

Maybe you are looking for