ECC and SCM connection

Hi folks,
i would like to see ECC and SCM scenarios connected by CIF, how ever HU2(ECC) and HU8 (SCM) systems are not interconnected. let us know whom do we need to contact in this regard.
Thanks in Advance ...

Hi Amit,
The ES (emphasis on Enterprise Service or Web Service) Workplace Systems are actually setup for customers or consultants to test drive SAP delivered Enterprise Services, so it stands to reason that integration between these systems would be using web services / SAP Enterprise services for the most part.
Trying to contact someone to configure CIF / ALE integration between HU2 and HU8 is not going to work for you.
Regards, Trevor

Similar Messages

Communication between ECC and SCM via XI

I am trying to set up the scenario 'Purchase_Order_Processing' between
ECC and SCM using XI. The SCM content for XI has been loaded into XI
and this scenario is included in the content.
We are running the following:
ECC - Version 5.0 - 640 SP level 12
XI - Version 3.0 - 640 SP Level 14
SCM - 4.10 - 640 SP Level 12
The connectivity between the systems has been set up as described in the configuration guides. On sending an IDOC (basic type ORDERS05) into XI I get the following error message 'Http server code 500 reason Internal Server Errorexplanation Error during parsing of SOAP header'.
The Error XML is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error
explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any assistance would be much appreciated.

Sravya,
Yes this an IDOC to http scenario. There was no dump at the receiver end. I've found out what was causing the problem - I was using an adapter type of HTTP. It should have been of type 'XI'. I've altered this and it works. Hopefully this will resolve your problem Vinod.
Richard

Block Demand Depend Interfaces between ECC and SCM

Hello All.
Is there a way to block only interfaces of Dependent Demand between ECC and SCM.
I need to do this because ECC writes over my plan in SCM.
Thanks and Best Regards

Hello PrasunM
For example:
When you create an Order on finished material, SCM using PP method "3 - Cover Ind. Requ." creates DepReq on raw material.
SCM using CIF sends PlOrd, PrdOrd and DepReq to ECC. I want send only PlOrd and PrdOrd, DepReq i only need in SCM side.
Best Regards.

SAP ECC and SCM 5.0,   CIF question

I have set up ECC to connect to SCM 5.0 via CIF, and have tested the RFC connections.   Test results say it's working.
Now what are the next steps?   LiveCache? I have a material in APO which needs to talk to liveCache to withdraw some data. Can someone give me some direction on the steps to follow after SCM installation? Thanks!!!

Mon_Ami,
It depends upon what business requirement you are trying to fulfill. You say you want to withdraw some data from livecache. What data? Why?
Do you want to forecast your company's demand? Do you want to create supply elements? Do you want to perform Availability checks? Do you want help in determining the best planning solution for a planning problem, based on constraints that you define? Or.....?
There are many business requirements that can use SCM as a solution. Normally, one doesn't implement SCM without having a concrete business requirement. What is yours?
Best Regards,
DB49

Error while testing ECC and Portal-Connect to SAP gateway failed

Dear Experts,
While testing ABAP connection in Portal i am getting below error.

Dear All,
My error is rectified with below thread.
SLDCHECK: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMIT'...
Hi,
You need to create an RFC to the SLDCHECK:
1. In your web browser, enter the URL of SAP NetWeaver Administrator using the following pattern:
http://<host>:<port>/nwa
2. Choose Configuration Management u2192 Infrastructure u2192 Jco RFC Provider.
3. Choose Create.
4. Enter the connection and transport parameters as required.
Field
Description
Program ID
We recommend that you use the following pattern: SLDAPI_<SAPSID>, where SAPSID is the system identifier of the AS Java system.
Gateway host
Gateway service
If your AS Java is an add-on installation to an ABAP system, use the gateway of the ABAP system. You can look up the gateway parameters of an ABAP system using transaction SMGW.
If your AS Java is a standalone installation, we recommend using a gateway on the Central Services Instance host. As of SAP NetWeaver 7.1, usage type AS Java that comprises SLD also contains an SAP RFC Gateway.
Server Count (1..20)
Enter 3.
5. Choose Next.
6. Enter logon data to the ABAP repository. You can either use an existing RFC destination from SAP NetWeaver Administrator u2192 Configuration Management u2192 Security u2192 Destinations or you specify the ABAP repository explicitly. The destination should point preferably to an AS ABAP close to SLD. If SLD is running on an AS Java standalone installation, the calling AS ABAP can be used instead. We recommend to create and use an RFC destination instead of explicitly specifying the connect parameters here. In both cases, the following parameters are required
Field
Description
System Landscape Directory 15
User Manual 03.04.2008
Application Server Host
System Number
Client
Language
User
Password
Enter the logon data for the AS ABAP system. You must specify an existing user with appropriate authorizations for RFC.
If you are running a system with both usage types AS ABAP and AS Java, use the logon data for this system.
If your AS Java is a standalone installation, use the logon data for the calling ABAP system.
7. Choose Next.
8. Leave the default values in the next steps.
9. Create the Jco RFC destination by choosing Finish.
Result
The Jco RFC destination creates a number of u201CServer Countu201D RFC server threads on your AS Java. These RFC servers register at the RFC Gateway specified. You may configure multiple ABAP systems to connect to these RFC servers. In this case, the Server Count should be increased when TIME_OUT exceptions are observed.
Creating an RFC Destination for the SLD ABAP API on the AS ABAP Side
Use
If you want to configure an ABAP application to access data in the SLD through the SLD ABAP API, you have to create an RFC destination on the ABAP system side.
Prerequisites
An RFC destination for the SLD ABAP API is created on the AS Java side.
Procedure
1. Call transaction SM59.
2. Select TCP/IP connections and choose Create.
3. In the RFC Destination field, enter SAPSLDAPI.
4. On the Technical Settings tab page, select the Registered Server Program indicator.
5. In the Program ID field, enter the same program ID as the one you entered when you created an RFC destination for the SLD ABAP API on the AS Java side. We recommend that you use the following pattern: SLDAPI_<SAPSID>, where SAPSID is the system identifier of the AS Java system.
6. Choose MDMP & Unicode and select the Unicode indicator.
7. Choose Save.
8. Test the RFC destination by choosing Connection Test.
If the display shows the response times, you have configured the RFC destination correctly.

ECC and CRm Connectivity

Hey all,
I've been working according the best practices
CRM Replication
Building Block Configuration Guide
to connect an IDES CRM 4 to and IDES R3.
After many problems the connection between the systems is working and data is replicating,
but there are some problems because those are IDES systems and there is already data in the systems I get some errors, that I don't know how to deal with.
In Tx. SMW01 I can see the following errors:
1. For the MATERIAL queue:
a. EAN 2348789098765432 does not correspond to the GTIN format and cannot be transferred
b. Plant 1000 is not assigned to any location
2. For the Customer_Main queue:
Customer number 403740 is already assigned to a business partner
Technical error occurred (4)
3. For the sales queue:
   Processing of document with Guid 4B683CC54CC25C498F0113CC4A211F16 is canceled
   Business transaction type SO does not exist
   Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
How can I fix those errors, its look like customizing errors...
Thanks alot
Natti.

Hi,
Any update onthe above issue. I am also facing the same problem.
Regards,
Khan

[Beginner:] Incorporation of ECC, BI and SCM APO Inquiries

Hi All,
I would like to seek your help on something I am working on. We have this supplies procurement planning tool that I was helping to create. Our general objective is to create a tool that will give a forecast of supplies that people need to procure from a facility for the future months. I am under BI and I am wondering on the basics regarding BI and SCM APO data flows. Honestly, I am still clueless on this. I have seen from our systems that most loads come from APO going to BI. Is it always that way? Are data from ECC considered as well?
Hoping to hear lots of advises on this. Thanks in advance for sharing your knowledge to a newbie like me.

Saging,
Hmmm. It seems a bit odd to be creating a 'forecasting-of-material-procurement' tool, when SAP has so many already built in, either within ERP or within APO. Oh well, I am sure there must be a good reason.
I have seen from our systems that most loads come from APO going to BI. Is it always that way?
BI type data can come from any source. The most common BI solutions I have seen is where BI data are extracted from the main ERP. However, the beauty of BI is that it doesn't care, SAP builds in functionality to get data from anywhere.
Are data from ECC considered as well?
They can be if you design it so.
You should be aware that most data existing in ERP that are relevant for material planning also usually exist in APO. The Core Interface between ERP and APO is normally set up to natively replicate substantial quantities of Master data and also transactional data. It may be that in your business environment, you really don't need to connect to anything other than APO. However, this is not a limitation of BI, it is just smart programming to try to minimize the number of sources of your data.
Best Regards,
DB49

How Many systems like ECC and BI can connect to EP server

Dear experts
I want to know ,how many systems can connect to one EP server,like ECC dev,qty and prd ,and BI dev,qty and prd with JCO and SSO connection...can you please clarify
Thanks in advance
Regards
krishna

Hi Krishna,
The best practice is to have separate systems for Development, Quality Assurance and Production.
Suppose you have One EP system, One ECC system, One BW System and One SRM system.
Then your landscape should be designed as stated below.
Development Environment:
Here you work on new developments/bug fixes and enhancements.
One EP System, One ECC system, One BW System and One SRM system.
And all these systems must be connected to EP system.
All of the above systems must reside in same domain.
QA Environment:
Here testing is done by testers/business.
Once you complete development and unit testing you have to transport those objects to QA system.
In this environment you have maintain all the systems similar to Dev Environment.
Production Environment:
This environment is for end users.
It should contain all the above said systems.
Here strictly no development/testing is not allowed.
Objects are transported from DEV> QA>PROD.
Regards,
Nagireddy.

No connection between ECC and PI

Hello,
I have developed proxy to file interface but I am not able to see any data flow between backend ECC and PI systems. I have gone through different blogs and forum threads to troubleshoot... creating RFC destinations, testing through RWB message, SLD configurations, SICF, etc. but I am not able to see any data going out of or into ECC. When I check SXMB_MONI or RWB message monitoring, I don't see any message either failed or success.
I don't think ECC is connecting to PI. I am able to create proxy in ECC and configure both inbound and outbound proxy but I don't see any data go through ECC. I am able to import RFC and IDocs in Integration Repository. Can anyone suggest what could be the problem and how to resolve it?
Thank you!

Hello,
I created a new test interface - File to RFC and tried to test it by sending payload from RWB and got the following error. I already checked that the host file has the server name and IP address entries.
Adapter Framework caught exception: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=HOSTNAME SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.131.3:sapgw30' not reached TIME Mon Sep 26 13:51:26 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 2
Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=hostname SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.131.3:sapgw30' not reached TIME Mon Sep 26 13:51:26 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 2 .

XI and PI connecting to the same ECC system

I had read this thread XI and PI
Currently, our ECC is connecting to XI. In Integration Engine config of ECC, role of business system is "Application System". In XI, role is "Integration Server". If we need to add a PI and connect to ECC, what should be done or what is the workaround that can make XI and PI connecting to ECC at the same time?
Thanks.

Hi Mark,
Thanks for the suggested blog, I need some time to study this. I do not understand why 'standard' integration server is defined as 'Application System'.
I also need to study the limitation of SPROXY on SAP application server refer to only one XI/PI system. May be the issue of my scenario is not just connecting multiple XI/PI to ECC system.
The scenario:
Maximo MEA 6.2 <-> XI 3.0 <--> ECC (current)
Maximo MEA 7.5 <--> PI 7.x <--> ECC (to be added)
Any input or experience sharing? Thanks.
Regards,
Donald

Connect ECC and BI

Hi i have installed ECC and BI on two different virtual machines on a single machine.
I want to connect them so that i can test extractors .
Please tell he steps in details.
thankyou

See step=by=step procedure to create SAP ECC source system in SAP BW system in online docu:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ac/4a4e38493e4774e10000009b38f889/content.htm
Do not forget to replicate your datasources. try to build up data flows up to report and enjoy all the beauty of SAP BW.

Is there any document to connect ECC and Netweaver CE 7.1

as subject...
i cound't find any document to connect ECC and CE 7.1 EHP4?
is there anyone how know any link?
thanks...

I want to publish all enterprise service in ECC6.0 to ESR
but i cound't... now the error occured in below...
SM59 -> SAPSLDAPI -> Test connection
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: 连接 SAP 网关失败。启动 SAP 网关了吗?
Error Details     LOCATION: SAP-Server aspnbp_YBP_01 on host aspnbp (wp 0)
Error Details     COMPONENT: CPIC
Error Details     COUNTER: 11
Error Details     MODULE:
Error Details     LINE:
Error Details     RETURN CODE: 236
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Tue Jun 07 02:35:50 2011
Error Details     VERSION:

Troubles trying to connect ECC and XI through RFCs

Hi,
I'm trying to connect XI and ECC through HTTP RFC connections. The bridge between XI and ECC is OK, but the bridge between ECC and XI is not working. It results in the error above:
Service cannot be reached
What has happened?
URL http://brjgs916:8001/sap/xi/engine call was terminated because the corresponding service is not available.
Note
The termination occurred in system XD0 with error code 404 and for the reason Not found.
The selected virtual host was 1-.
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:P-i:brjgs916_XD0_01-v:1--s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Trying to teste the service root
default_host\sap\xi\engine and received the error message "Could not find host or port information". Looking at SMICF the services are functional and seams to work (green checks at right side) in both sides, ECC and XI.
Some one knows what happens and could help me?
Thanks

Hi,
>>>>I'm trying to connect XI and ECC through HTTP RFC connections
>>>>Troubles trying to connect ECC and XI through RFCs
what exactly are you trying to do?
connect via ABAP proxy (HTTP) or via RFC ?
if via proxy:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
if RFC:
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Connecting R3-4.5B and SCM-4.0

We currently have SCM-4.0 connected to an R3 4.7 server. This is working correctly to transfer the results of Demand Planning to Demand Management.
We now want to transfer the results of Demand Planning to another server that is version 4.5b.
Does anyone have any experience with this configuration or know of any compatibility issues.
Any help would be wonderful.

Hi,
You can establish a connection between SAP 4.5B and SCM 40 to transfer the results of Demand Planning to Demand Management. However, Please make sure that the RFC's are defined properly and also check whether remote logon is working fine.
Hope it helps.
Thanks,
Naga

I need forum for beginner learner in inventory purchase and SCM modules

I need forum for beginner learner in inventory purchase and SCM modules

Saging,
Hmmm. It seems a bit odd to be creating a 'forecasting-of-material-procurement' tool, when SAP has so many already built in, either within ERP or within APO. Oh well, I am sure there must be a good reason.
I have seen from our systems that most loads come from APO going to BI. Is it always that way?
BI type data can come from any source. The most common BI solutions I have seen is where BI data are extracted from the main ERP. However, the beauty of BI is that it doesn't care, SAP builds in functionality to get data from anywhere.
Are data from ECC considered as well?
They can be if you design it so.
You should be aware that most data existing in ERP that are relevant for material planning also usually exist in APO. The Core Interface between ERP and APO is normally set up to natively replicate substantial quantities of Master data and also transactional data. It may be that in your business environment, you really don't need to connect to anything other than APO. However, this is not a limitation of BI, it is just smart programming to try to minimize the number of sources of your data.
Best Regards,
DB49

ECC and SCM connection

Similar Messages

Maybe you are looking for