ECC Best Practice for BOBJ

Hi Guys,
Can anyone please provide me the documents for ECC best practice for BOBJ. particularly the best practice to define the Infosets in ECC?
Thanks much for your help
VJ

Hi,
Go through sap note SAP Note 1411844 for the best practice.
Re: Creating xcelsius directly on ECC
@Sri

Similar Messages

  • SAP Best Practices - For ECC 5.0

    For ECC 5.0, can the best practices be installed on a SAP system? Would this be available via the SPRO implementation guide?

    Hi Devendra!
    For the Best Practices you can have all the useful installation and informations guides here.
    <a href="http://help.sap.com/">Best Practices for SAP</a>
    Choose here the Bast Practices tab on the line-menu.
    You have to eb careful while installing the BP -> you have to use all the time the right BP release according to your SAP release.
    I hope this helps you!
    Best regards,
    Zsolt

  • SAP Best Practices for HCM Canada for ECC 6.0

    Hi,
    I want to install SAP Best Practices for HCM Canada on existing ECC 6.0 System. Is there a way to do it?? Help needed ASAP.
    thanks in advance.
    Shaukat

    Hi Shaukat!
    Please take a look at http://help.sap.com -> SAP Best Practices -> Cross-Industry Packages.
    You can also try and take a look at http://service.sap.com/swdc -> Download -> Installations & Upgrades -> Entry by Application Group -> SAP Best Practices
    Caution! You only can use the BP if this is suitable to your ERP version! Check if your HCM BP is for ERP2004. If so it will not work on an ERP2005 System.
    I hope this helps!
    Regards,
    Zsolt

  • Can we install Best Practice for Fabricated Metals V1.604 on ECC 6.0 EHP5

    Hi Expert Team,
    We are planning to implement Best Practice for Fabricated Metals V1.604 on ECC 6.0 environment.
    We are on ECC 6.0 EHP5, but the SAP installation document mentions to install Fabricated Metals V1.604 on ECC 6.0 with EHP4.
    Also I dont think SAP has released Best Practice for Fabricated Metals for EHP5.
    I would request your confirmation if we can still install Best Practice for Fabricated Metals V1.604 on ECC 6.0 EHP5, does EHP5 supports BP V1.604, Let us know if there will be any impact on Fabricated Metals V1.604 if we install on  EHP5.
    I didnt find any SAP note or document to answer my question. Please provide some reference for the same.
    Looking forward for your response.
    Thank you!
    Guru
    Edited by: Gururaj Srinivasa on Jan 31, 2012 12:41 PM

    Dear Srinivasa,
    Did u find a solution for this issue, if you did please mention it since i have the same problem.
    Thanks in advance.

  • Best Practices for converting SAP HR data (4.7 to ECC)

    Hello Experts ...
    We are going from 4.6 to ECC ... no upgrade ..it will be a new implementation ...
    I am looking for best practices to convert SAP HR data from one sap instance(4.6) to another(ECC) ...
    I am not sure if direct input or LSMW or any other method/tool is the best way ...
    Will really appreciate and award point if I can get good advise or documentation ...
    Let me know if my question is not clear enough.
    Thanks,

    Hi
    You can check SAP Marketplace and there follow the download link. You will require a SAP Marketplace login to download the Best Practices. Fortunately Best practices for ECC 5.00 and 6.00 are available there but they are country specific versions. I know HCM for US is available there.
    Reward points, if helpful.
    Regards
    Waz

  • Best Practice for Tranport request Naming

    Hi,
    We are using SolMan 4.0 during implementation of ECC 6.0.
    We have placed the blueprint and we are in configuration phase.
    We have a IMG project created in the DEV system and was assinged in Solution Manager project under  System Landscape->IMG Projects.
    Now that consultants are going to dev system and customizing they are creating their transport requests.
    Is there any best practice for the naming convention or the transport requests..
    By creating one IMG project for entire implementation is that going to create any problem..!!
    Please sgugest.
    Thanks & Regards
    Mrutyunjay

    As per MSFT best practices(Mentioned by Scott) keep it short as much as possible. You can use SP for SharePoint-SUBSite
    also check this blog for best practices.
    http://www.networkworld.com/community/blog/simple-naming-conventions-improve-end-user-experience-sharepoint-sites
    also one more thing you should consider, never use the reserved words into the SharePoint URLs. you will able to create the site/lis/library/folder but when you browse get the 404 errors.
    check this blog:
    http://www.sharepointblog.cz/2012/04/reserved-words-in-sharepoint-url.html
    http://techtrainingnotes.blogspot.com/2012/03/names-you-cant-use-for-sharepoint.html
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • What is the best practice for APO - Demand planning implementation

    Hi,
    M client wants to implement demand planning.
    Cient has come up with one scenario like a New Customer is created in ECC, and if I use BI and then APO flow for Demand planning, user will have to wait for another day. (AS BI is always having one day delay).
    For this scenarios user is insisting on ECC and APO-DP interface.
    Will anybody suggest what should be the best practice for Demand planning.
    ECC -> Standalone BI -> Planning area (Planning is done in APO) -> Stand alone BI
    Or ECC -> APO-DP (Planning is done in APO) -> Standalone BI system
    I hope I am able to explain my scenario.
    Regards,
    Saurabh

    Any suggestions !!

  • Best Practice for Portal Patches and effort estimation

    Hi ,
    One of our client is applying the following patches
    1. ECC 6.0 SP15(currently SP14)
    2. ESS MSS SP15(currently SP14 with some level of functional customization )
    3. EP 7 SP18(currently SP14)
    We would like to kwow the best practice for applying portal patches and the effort estimation for redoing the portal devt on the new patch.
    o   What is the overall level of effort with applying Portal patches?
    o   How are all the changes to SAP objects handle?  Do they have to be
         manually re-entered?
    o  What is the impact of having a single NWDI instance across the
        Portal Landscape during the Patch process?
    Regards,
    Revathi Raju.

    Hi Revathi,
    o What is the overall level of effort with applying Portal patches?
    overall effort to apply the patch is apprx 1/2-1 days for NW7 system. This is exclude the patch files download because it's based on your download speed.
    o How are all the changes to SAP objects handle? Do they have to be
    manually re-entered?
    Depending on your customization. Normally it wont effect if you created the customzation application apart from SAP standard application
    o What is the impact of having a single NWDI instance across the
    Portal Landscape during the Patch process?
    Any change that related to NWDI, you might be need to re-deployed from NWDI itself.
    Thanks
    Regards,
    AZLY

  • What is the Best practice for ceramic industry?

    Dear All;
    i would like to ask two questions:
    1- which manufacturing category (process or discrete) fit ceramic industry?
    2- what is the Best practice for ceramic industry?
    please note from the below link
    [https://websmp103.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000409682008E ]
    i recognized that ceramic industry is under category called building material which in turn under mill product and mining
    but there is no best practices for building material or even mill product and only fabricated meta and mining best practices is available.
    thanks in advance

    Hi,
    I understand that you refer to production of ceramic tiles. The solution for PP was process, with these setps: raw materials preparation (glazes and frits), dry pressing (I don't know extrusion process), glazing, firing (single fire), sorting and packing. In Spain, usually are All-in-one solutions (R/3 o ECC solutions). Perhaps the production of decors have fast firing and additional processes.
    In my opinion, the curiosity is in batch determination in SD, that you must determine in sales order because builders want that the order will be homogeneus in tone and caliber, and he/she can split the order in diferents deliveries. You must think that batch is tone (diferents colours in firing and so on) and in caliber.
    I hope this helps you
    Regards,
    Eduardo

  • What is best practice for dealing with Engineering Spare Parts?

    Hello All,
    I am after some advice regarding the process for handling engineering spare parts in PM. (We run ECC 5)
    Our current process is as follows:
    All materials are set up as HIBE's
    Each material is batch managed
    The Batch field is used for the Bin location
    We are now looking to role out PM to a site that has in excess of 50,000 spare parts and want to make sure we use best practice for handling the spare parts. We are now considering using a basic WM setup to handle the movement of parts.
    Please can you provide me with some feedback on what you feel the best practice is for dealing with these parts?
    We are looking to set up a solution that will us to generate pick lists etc and implment a scanning solution to move parts in and out of stores.
    Regards
    Chris

    Hi,
    I hope all the 50000 spare parts are maintained as stock items.
    1. Based on the usage of those spare parts, try to define safety stock & define MRP as "Reorder Point Planning". By this, you can avoid petty cash purchase.
    2. By keeping the spare parts (atleast critical components) in stock, Planned Maintenance as well as unplanned maintenance will not get delayed.
    3. By doing GI based on reservation, qty can be tracked against the order & equipment.
    As this question is MM & WM related, they can give better clarity on this.
    Regards,
    Maheswaran.

  • Best practice for real time requierement

    All,
    I am trying to find out what is the best practice for reporting against real time data ?
    is it while using
    1 - webi against universe/bex query on the top of hybrid cubes ?
    2 - Crystal report directly against the ECC data ?
    3 - using another solution such as Data Fedrator ? or something different ?
    I am looking to know if anyone got such req and also to share their experience 
    did they get some huge challenge against hybrid cubes ?
    Thanks in advance for your help
    Philippe

    Well their first requierement was to get real time data .. if i am in Xcelsius and click refresh then i want it to load my last data ..
    with live office , i can either schedule a crystal report and get the data delayed or use the option from live office to make iterfresh as right now .. is that a correct assumption ?
    I was talking about BW, just in case they are willing to change the requierement to go from Real time to every 5 min
    Just you know we are also thinking of the following option:
    1 - modify the virtual provider on the  CRM machine to get all the custom fields needed for the Xcelsius Dashboard
    2 - Build some interactive report on the top of these Virtual Provider within CRM
    3 - get the link to this report , it is one of the Report feature within CRM
    4 - design and build your dashboard on the top of it
    5 - EXport your swf file to the cRM web ui
    we are trying to see which one is the best one
    Philippe

  • Best practice for retraction of data from BPC 10.0 to General Ledger

    Hi All,
    I have the requirement to retract data from BPC 10.0 to General Ledger.
    What is the best practice for doing this?
    I have read the "How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I", but this is prepared to transfer data to Cost Center accounting. Will General Ledger be populated automatically?
    What is your opinion on this?
    Best regards,
    JA

    Hi Rich,
    In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
    For this retraction we are following below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
    In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
    as it is Z class, i am unable to create in my system.
    could you please help me.

  • Best Practice for Production IDM setup

    Hi, what is the best practice for setting up prodcution IDM:
    1. Connect IDM prod to ECC DEV,QA and Prod or
    2. Connect IDM prod to ECC prod only and Connect IDM dev to ECC Dev and QA.
    Please also specify pros and cons for both options if possible.
    Thanks in advance,
    Farhan

    We run our IDM installation as per your option 2 (Prod and non-prod on separate instances)
    We use HCM for the source of truth in production and have a strict policy regarding not allowing non HCM based user accounts. HCM creates the SU01 record and details are downloaded to IDM through the LDAP extract. Access is provision based on Roles attached to the HCM Position in IDM. In Dev/test/uat we create user logins in IDM and push the details out.
    Our thinking was that we definitely needed a testing environment for development and patch testing, and it needs to be separate to production. It was also ideal to use this second environment for dev/test/uat since we are in the middle of a major SAP project rollout and are creating hundreds of test and training users with various roles and prefer to keep this out of a production instance.
    Lately we also created a sandpit environment since I found that I could not do destructive testing or development in the dev/test/uat instance because we were becoming reliant on this environment being available. Almost a second production instance - since we also set the policy that all changes are made through IDM and no direct SU01 changes are permitted.
    Have a close look at your usage requirements before deciding which structure works best for you.

  • Best practice for SD Cube

    Hi Gurus!
    I have to active this cubes:
    Deliveries        
    0SD_C02
    Delivery Service 0SD_C04
    I can´t find the best practices for that.
    Any ideas?
    I will assign full points.
    Thanks in advance!

    Did you wanted Best Practice for Installation.
    Find out datasources feeding 0SD_C02 from                                                        <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm">Help</a> .
    Activate the same in ECC  - RSA5
    Replicate in BW.
    Install 0SD_C02 with Grouping as Dataflow Before

  • SAP Best Practice for Discrete Manufacturing

    Hi colleagues,
    We are installing SAP BP for Discrete Manufacturing based on ECC 6.00. We have already installed the Baseline Layer 0. The problem we face now is that some of the building blocks required for Layer1 activation are not present amongst the ones already installed.
    How does one get these missing building blocks?
    Thank you.

    Dear,
    For detail information please refer the OSS notes,
    1040010 and 1223033 - SAP Best Practices for Discrete Manufacturing V1.603 CN
    Ensure that exactly the support package levels mentioned in the Quick Guide are implemented (not below and NOT HIGHER).
    Regards,
    R.rahmankar

Maybe you are looking for

  • How to access custom object as property in yField

    Hi All, I have a stacked column chart. The data provider (dp) has an array of object DataObject which has array of custom objects of class ClientRev: public function ClientRev(name: String, rev : Number) cName = name; cRev = rev; // data provider pub

  • My PDF documents do not print correctly

    When I try to print a PDF with more than one page, only the first one prints correctly, the rest of the pages print a a smudge in the upper left hand corner.

  • Cant sign on into my email.

    I havent been able to sign on into my email for  more than a week now. idk whats going on ive tried different browsers, i even tried it on my phone. but everytime i try to log in, it just redirects me to the home page. can somebody help me?

  • A Progress Bar for my large catalog

    I have a large catalog that I am putting on the web and I want people who have a slow connection to know that the file is still loading. Is there a way to add a progress bar to my file in Indesign CS5 or must I bring it into flash to optain this feat

  • Smartforms in landscape layout

    Hello  Gurus ,                        I want to print test certificate in smartforms in landscape layout , i given inch12 in output options of form attributes , but i am getting print out in portrait form , is there any particular reason that i am no