ECC Client for BI7

Hello guys,
I have couple of questions/confusion regarding ECC (source system) connection for New BI7 system.
We used to BW3.5 system and the Source System/R3 Client we were using was lets say ABCLNT80.So that means there was no RFC connection issues between these systems. Now we have a new System also, BI7 , and it has been configured to connect with different Source Client/R3 ..XYZCLNT700.
So, does this mean that i can no longer use my previous Source Client ABCLNT80 to send replicate DS to new BI7. do I have to access this new Source Client XYZCLNT700 as a Source system which has a RFC connected established already? if so , would I supposed to have new Configuration/log in information for this Source Client or i can use old ones? because it seems Client # with new one seems to be changed. I am really confused with this , please give me some hints on how these work.
thanks
dk

Hi,
I think you'll have to create a new RFC connection for the new system. This is a basis job. So contact your basis team,they should help you with this.
Regards.

Similar Messages

ECC clients for Datasource Activation

Hi Gurus,
In my project we are using three ECC clients.One is ECC-Golden,ECC-Development,
ECC-Unit tesing.
To activate LO datasources, I am in confusion to use which client from above.
Can anyone brief about the clients in ECC.
Appreciate the speedy reply.
Regards
gkrr

Hi Ganesh,
Golden client is the one where nothing is modified to other than what SAP has given. This is like a template client.
Development is the one where all these things are done, in terms of activations, creations. So your case falls here.
Unit test client, is where some data is posted and developments are tested.
This is as per the nomenclature provided. Not sure, if this can be different in your case.
Naveen.A

'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies

Dear Experts
I am currently facing an issue when I want to connected multiple PI instances to one ECC client for
ABAP Proxy purposes.
In transaction 'SPROXY', in the Enterprise Service Brower, only one PI instance is shown and accessable.
Can this setting be changed to allow multiple PI systems in this Enterprise Service Browser?
Thanks for your ideas.
Mathias

Hi,
Check these replies.
R/3 connected to multiple XI instances
'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies
Multiple XI Instances
Multiple XI instances or multiple app server
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 11:43 AM

Connecting multiple ECC Clients on same ECC system to BW system(s)

Hello.
We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about? Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'? Any and all comments are welcome as we have not yet acted on our ideas yet.
Thanks very much for whatever comments you might provide,
Geoff.

We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
No impact on the BW system. The only thing that you will have to take care of is that any process chains which fetch data from this DEV ECC system should not be put on periodic cycle because after disconnecting the ECC system, these would start failing.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about?
Again no impact on ECC system. As for the client connected earlier to sandbox system, just clear all the queues in RSA7, LBWQ
Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'?
No its not at all a bad practice

Extract data from ECC6 to Netweaver2004s for BI7.0

Hi Guru's,
I have two systems ECC 6 and Netweaver2004s.For BI7.0 in Netweaver2004s i want to Extract the data from ECC6 into Netweaver2004s BI 7.0.
1.How can i make ECC6 as a Source System for the Netweaver2004s.
2. In Netweaver2004s for BW 3.5 i am getting the Administrator Workbench but objects are still showing the 7.0 properties. How can i over come this issue.
Kindly help me out on this issues.
Thanks in Advance
Regards
Prem

Hello Prem,
1. Basically Tcode RSA1 - Modeling - Source Systems - right click the "Source Systems" on the right - Create - Automitically create SAP system
2. Haven't heard of BW 3.5 based on NW 2004s... Please check the release of BI_CONT component from menu System - Status - Component info. Likely you find 7.0.x instead of 3.5.x
Best regards,
Victor

Impact on changing ECC client on the working of ESS business package in EP

Dear Experts,
We had ESS business package working fine in our EP 7.0 which connected to client 100 of ECC 6.0.
Now we changed to client 700 in ECC 6.0.
Now all is working OK except for the Personal Data piece (address,bank etc).
The first screen shows up OK but when we review it we get the error :
Access via NULL object reference not possible.,error Key:RFC_ERROR_SYSTEM_FAILURE
The user is setup the same way as that in ECC 100.
The JCO is working correctly.Get successful message when we click "TEST".
I have used USER/PWD in both meta data and application data (though it is said to use Ticket and User/Pwd. It worked with ECC Client 100.)
Appreciate any inputs
Thanks.
Ashish

hi ashish,
try to use only application data

Change Source System client for BI datasources

Friends,
We have created/migrated datasources in QA system using existing SAP Source System, for example, ECC Client 320. Now we want to change the SAP Source System to the different client, for example, ECC Client 330.
All datasources are already created when connected to old Source System (ECC Client 320). The new requirement is to extract the data from new client, from ECC Client 330. We like to change this seamlessly without impacting the data loads, full as well as delta.
Any ideas as to how to accomplish this please?
Regards,
Upender Kadire

Hi,
The client mentioned while creating source system in BW is to be changed.
Go to the RFC Destination created for R/3 system in BW and change the client.
Now regarding the delta, the delta has to work fine, as BW system is Client independent. It looks for the Source and bring data.The delta queue is maintained in R/3.if you change the client, the delta will be picked from the new client.
Happy Tony
Happy Tony

Multiple ECC clients configured to APO

Folks,
If multiple ECC clients (001, 002, 003) are configured with a single APO client(001), how does APO system deal with this without causing data issues.
Say if I updated Material master in all these 3 ECC clients, which version will be refelected in APO system.
TIA

Hi Pat,
Need to maintain different BSG: Business System Group for each R/3 by tcode : /SAPAPO/C2.
"Maintain Business System Group
    Use
    In this IMG activity, you determine the assignment to a business system
    group of the APO System and the SAP R/3 System to be connected. By doing
    this, you create areas with the same naming conventions. These guarantee
    that the same names are used for master data, and also their
    synchronization in distributed system landscapes.
    Requirements
    As an independent logical system, the APO System must, in addition to
    the SAP R/3 Systems, be assigned to a business system group (BSG).
    Activities
    o   Choose New entries.
    o   On the New entries: Overview screen, specify the following
    o   information for the business system group:
        -   An alphanumerical key (maximum of 10 characters).
        -   A description.
    o   Save your entries.
Example 1
An APO System is to be linked with two SAP R/3 Systems (A and B), in
which two different materials (for example a hammer and a screw), have
the same material number (100). Both materials are to be represented as
two different products in the APO System.
Assign both SAP R/3 Systems to different BSGs. Assign the APO System to
one of the BSGs.
o   SAP R/3 System A (Material number 100 = Hammer) -> BSG A
o   SAP R/3 System A (Material number 100 = Screw) -> BSG B
o   APO System -> BSG A
In order to avoid having two identical names and to be able to uniquely
assign the material numbers, you need SAP extension APOCF005. This is an
inbound processing product (transaction SMOD or CMOD).
Material number 100 from BSG A receives, for example, product number 100
in the APO System and material number 100 from BSG B gets product number
100_B. This allows you to uniquely assign the materials.
For inbound processing in the APO System, the following SAP enhancements
are available as customer exits for master data:
o   APOCF001 : Inbound processing location
o   APOCF005 : Inbound processing product
Example 2
An APO System is to be linked with two SAP R/3 Systems (A and B). In SAP
R/3 System A, a particular screw has material number 110. In SAP R/3
System B, it has material number 120. Both material numbers are
represented in the APO System by one product, with product number 110.
Assign both SAP R/3 Systems to different BSGs. If possible, assign the
APO System to the BSG whose data does not have to be renamed.
o   SAP R/3 System A (material number 110 = screw) -> BSG A
o   SAP R/3 System B (material number 120 = screw) -> BSG B
o   APO System (product number 110 = screw) -> BSG A
You use SAP enhancement APOCF005 to convert the local SAP R/3 material
number 120, to the APO product number, 110.
Note
For the time being, this second scenario is only supported for material
masters and product masters. If, for example, the same customer is used
with different BSGs in R/3 Systems A & B, you must create two separate
customer locations in the APO System. This applies for the vendor,
plant, and other master data.

How do you copy/install a pre-configure client for Mexico

Is there a pre-configured client for Mexico.
If yes, how do you install pre-configured clients.
Where do you get information on pre-configured clients
Thanks
Joe

Hello Joe,
actually, there is another possibility that might be interesting for you:
http://service.sap.com/bestpractices
At "Release Planning" -> Availability Matrix
I can see that the country-specific baseline for Mexico is available for ECC 6.0, also, an updated version and a version for the Retail-industry is planned for Q3/Q1, respectively.
The documentation DVD of the best practices explains in detail the business processes, master data etc. that will be activated in the system if you install the SAP Best Practices Baseline Mexico in your system.
Best regards, Barbara

Changing the ECC Client in DEV affects Transformation?

Hi,
I have a Clarification here.
We have 2 clients for ECC Dev, 300 & 100. We completed all our developments in BID linking to 300 client. Now, Customer says that he has more data in 100 client, so he wants to do testing of that data.
We have activated all the MD & TD Datasources in 300 Client and all the Transformation mappings are also pointing to 300.
How can this be achieved? Now, if suppose, Basis changes the Logical system to 100, do i have to do all the Activations in ECC again for 100? Do I have to create Transformations for all the Targets again?
Thanks for your time.
Regards,
Murali

Hi Murali,
Transformations are not source system dependent, when you say that you can see the name of source system in your transformation, where actually you can see that name? In the description or do you have source system as field in the header informaiton of Transformation?
You can get the difference, when you double click on your Data source you will see the Source system as separate field in the header information, but in case of transformation you will have only source or transformation and Target as important fields along with other fields.
Or are you saying that in the transformation mapping of fields you have source system ID assigned to target field source system ID?
And during transport source system changes are taken care by using transport connection, go to your RSA1 transaciton in the target system and go to Transport Connection-----> "Conversion" button on the tool bar here you can do the mapping of your source client and target client.
Regards,
Durgesh.

No Jabber client for Windows Phone 8.1

Can you advise on when a Jabber client for Windows Phone 8.1 will be released?

Roadmap questions cannot be addressed here, either ask in a partner forum, or reach your SE/AM for this.

How to create a VPN client for Windows Phone 8.1?

We have our own VPN client for Windows and Android. I would like to create a VPN client for Windows phone 8.1. After referring these site I found that there are some third
party VPN plugins available for WP 8.1.
I checked OpenVPN but it is also not available for WP 8.1.
Is there any APIs available for creating a VPN client in WP 8.1 similar to
VpnService provided by Android SDK ?

The VPN APIs for WP8.1 are not open at this time.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Jabber Client for CME license

i have CME 2921 ISR router and i need to implement cisco jabber client for 50 user
is this needs a license or not
if yes, please provide me how to orser it and what is its part number
thank you very much

If you are going to use Jabber, that counts like a regular SIP Phone, just like 7945, or 99XX phones, you don't need an additional license:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1058022
HTH
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

Cisco Jabber Client for Linux

Are there any plans to have a Cisco Jabber client on linux?

Mike,
The larger body of use case and development for Jabber has centered on Windows and mobile iOS and Android devices. That's not to say that there isn't a contingency of customers that want a Linux client but, as of today, there is no "Jabber" client for that platform. However, I've heard this question asked in a few different forums and the answer thus far has typically been one or both of the following:
1) There is a Jabber SDK, which could potentially be used to custom develop an application.
2) Use 3rd-party XMPP client (e.g. Pidgin)
As for an official answer on "will there be in the future" with a yes/no/maybe and/or a possible timeframe, you would need to reach out to Cisco or your trusted partner as roadmap items cannot be discussed without having a non-disclosure agreement in place. That's what Jamie is getting at in his response.
D. Hailey
NetCraftsmen, LLC.

ECC Client for BI7

Similar Messages

Maybe you are looking for