ECC clients for Datasource Activation

Hi Gurus,
In my project we are using three ECC clients.One is ECC-Golden,ECC-Development,
ECC-Unit tesing.
To activate LO datasources, I am in confusion to use which client from above.
Can anyone brief about the clients in ECC.
Appreciate the speedy reply.
Regards
gkrr

Hi Ganesh,
Golden client is the one where nothing is modified to other than what SAP has given. This is like a template client.
Development is the one where all these things are done, in terms of activations, creations. So your case falls here.
Unit test client, is where some data is posted and developments are tested.
This is as per the nomenclature provided. Not sure, if this can be different in your case.
Naveen.A

Similar Messages

  • ECC Client for BI7

    Hello guys,
    I have couple of questions/confusion regarding ECC (source system) connection for New BI7 system.
    We used to BW3.5 system and the Source System/R3  Client we were using was lets say ABCLNT80.So that means there was no RFC connection issues between these systems. Now we have a new System also, BI7 , and it has been configured to connect with different Source Client/R3 ..XYZCLNT700.
    So, does this mean that i can no longer use my previous Source Client ABCLNT80 to send replicate DS to new BI7. do I have to access this new Source Client XYZCLNT700 as a Source system which has a RFC connected established already? if so , would I supposed to have new Configuration/log in information for this Source Client or i can use old ones? because it seems Client # with new one seems to be changed. I am really confused with this , please give me some hints on how these work.
    thanks
    dk

    Hi,
       I think you'll have to create a new RFC connection for the new system. This is a basis job. So contact your basis team,they should help you with this.
    Regards.

  • 'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies

    Dear Experts
    I am currently facing an issue when I want to connected multiple PI instances to one ECC client for
    ABAP Proxy purposes.
    In transaction 'SPROXY', in the Enterprise Service Brower, only one PI instance is shown and accessable.
    Can this setting be changed to allow multiple PI systems in this Enterprise Service Browser?
    Thanks for your ideas.
    Mathias

    Hi,
    Check these replies.
    R/3 connected to multiple XI instances
    'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies
    Multiple XI Instances
    Multiple XI instances or multiple app server
    Thanks,
    Vijaya.
    Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 11:43 AM

  • Change Source System client for BI datasources

    Friends,
    We have created/migrated datasources in QA system using existing SAP Source System, for example,  ECC Client 320. Now we want to change the SAP Source System to the different client, for example, ECC Client 330. 
    All datasources are already created when connected to old Source System (ECC Client 320). The new requirement is to  extract the data from new client, from ECC Client 330. We like to change this seamlessly without impacting the data loads, full as well as delta.
    Any ideas as to how to accomplish this please?
    Regards,
    Upender Kadire

    Hi,
    The client mentioned while creating source system in BW is to be changed.
    Go to the RFC Destination created for R/3 system in BW and change the client.
    Now regarding the delta, the delta has to work fine, as BW system is Client independent. It looks for the Source and bring data.The delta queue is maintained in R/3.if you change the client, the delta will be picked from the new client.
    Happy Tony
    Happy Tony

  • Transport of ECC/SRM datasources activation

    Hello
    I want to transport the activation of standard ECC or SRM datasources.
    When I use the transportation icon (truck) in the RSA6 screen, the system indicates "action successfully completed" but it doesn't ask for a transport request.
    How can I include these activations into a transport request?
    thanks
    Crystelle

    Hey, when you are activating a data source, right then it will/should ask you for a transport request. If its not doing that, talk to your basis. If you want to move a datasource that is already transports, then you may have to change it/de-activate(delete) it and then activate it again. but its tricky job and you cannot do this safely on all datasources (especiall the ones that already has an existing delta queue).
    Just in case, talk with a basis or Sr. Consultant about the complete requirement.
    In summary, if you want to transport a new datasource, as soon as you activate it, you will get a transport request. If it didn't, Its important that you talk to basis. They have to change some parameters.
    If you want to move already transported data source, tell us why? If you are making chages to it, it will then ask for a transport request.
    Uday Chamarthy

  • Getting VFS manager for client J2E_iom_D failed: Activity report (get open

    Getting VFS manager for client J2E_iom_D failed: Activity report (get open activities for current repository and user) failed: Internal Server Error
    I cannot sync with dtr and moreover the tracks which i deleted still shows up in DTR folder and i am not bale to delete it.
    Please help....
    George

    NetWeaver Sneak ...  SP 16:  table PVC_ACTVERSVIEW missing i got answer from this.
    Had to redeploy sda and it solved all probs .it was the prob with WAS...

  • Component activation in cmod for datasource enchancements

    HI GURU,
                   iam a facing a problem with  component activation in cmod for datasource enchancments.in components screen i am unabel to get tick mark on  imp column for component "EXIT_SAPLRSAP_002", give to that i am not able to write code in include .
    THANKING YOU

    hi,
    If it is standard it is not allowed to write a code if u wwant edit are write a code go to SE80 and create new once and add into that 002 include program. XRsR and select function group.
    SE80----REpository Browser--Select Function group in droup down list -XRSR----Add into includes
    Regards,
    Lakshmi

  • Getting VFS manager for client EED_diarough_D failed: Activity report (get

    Hi,
       I'm using NW 2004s SP9. While trying to check in the activities in NWDI from NWDS I'm geting the following error messege:
    " Getting VFS manager for client EED_diarough_D failed: Activity report (get open activities for current repository and user) failed: Internal Server Error"
    Can you please help to resolve this issue.
    Regards,
    Subhayu

    NetWeaver Sneak ...  SP 16:  table PVC_ACTVERSVIEW missing i got answer from this.
    Had to redeploy sda and it solved all probs .it was the prob with WAS...

  • Client Management for an Active Small Business

    HI Everyone,
    I was looking to get advice on setting up our clients for our small business. We have a mixed environment but now are focused on the macs. We have mobile users and desktops and need to find some harmony...
    Some issues, questions, I've run into:
    - Do you setup laptops like desktops - requiring the user to log in and using homesync to backup all of their files? Do you suggest another setup with basic (time machine) backup?
    - How can I allow users to install programs on their machines with access? Often times the machine admin's permission is needed to install Skype, Oovoo, or other programs our sales people use to conference call and they need me to enter them in. Is there a way to allow them to install, or have access, to do this?
    Thanks,
    Shai

    sshefer wrote:
    HI Everyone,
    I was looking to get advice on setting up our clients for our small business. We have a mixed environment but now are focused on the macs. We have mobile users and desktops and need to find some harmony...
    Some issues, questions, I've run into:
    - Do you setup laptops like desktops - requiring the user to log in and using homesync to backup all of their files?
    Sort of. The mobile devices typically get portable home directory settings. (So that they work when the server is inaccessible.)
    Do you suggest another setup with basic (time machine) backup?
    The clients get set up with a backup device at whatever fixed location where they're most commonly used.
    - How can I allow users to install programs on their machines with access? Often times the machine admin's permission is needed to install Skype, Oovoo, or other programs our sales people use to conference call and they need me to enter them in. Is there a way to allow them to install, or have access, to do this?
    Folks can typically be configured to allow them to [run stuff out of their own directories|http://developer.apple.com/library/mac/#documentation/MacOSX/Concep tual/BPFileSystem/Articles/WhereToPutFiles.html%23//apple_ref/doc/uid/TP40001411 -BAJHCHJI]; there can be a [~/Application directory|http://developer.apple.com/library/mac/#documentation/MacOSX/Conceptu al/BPFileSystem/Articles/Domains.html] established for each user.
    It's possible to set folks up as local administrators, though I tend not to.

  • Changing the ECC Client in DEV affects Transformation?

    Hi,
    I have a Clarification here.
    We have 2 clients for ECC Dev, 300 & 100.  We completed all our developments in BID linking to 300 client.  Now, Customer says that he has more data in 100 client, so he wants to do testing of that data.
    We have activated all the MD & TD Datasources in 300 Client and all the Transformation mappings are also pointing to 300.
    How can this be achieved?  Now, if suppose, Basis changes the Logical system to 100, do i have to do all the Activations in ECC again for 100?  Do I have to create Transformations for all the Targets again?
    Thanks for your time.
    Regards,
    Murali

    Hi Murali,
    Transformations are not source system dependent, when you say that you can see the name of source system in your transformation, where actually you can see that name? In the description or do you have source system as field in the header informaiton of Transformation?
    You can get the difference, when you double click on your Data source you will see the Source system as separate field in the header information, but in case of transformation you will have only source or transformation and Target as important fields along with other fields.
    Or are you saying that in the transformation mapping of fields you have source system ID assigned to target field source system ID?
    And during transport source system changes are taken care by using transport connection, go to your RSA1 transaciton in the target system and go to Transport Connection-----> "Conversion" button on the tool bar here you can do the mapping of your source client and target client.
    Regards,
    Durgesh.

  • Multiple ECC clients configured to APO

    Folks,
    If multiple ECC clients (001, 002, 003) are configured with a single APO client(001), how does APO system deal with this without causing data issues.
    Say if I updated Material master in all these 3 ECC clients, which version will be refelected in APO system.
    TIA

    Hi Pat,
    Need to maintain different BSG: Business System Group for each R/3  by tcode : /SAPAPO/C2.
    "Maintain Business System Group
        Use
        In this IMG activity, you determine the assignment to a business system
        group of the APO System and the SAP R/3 System to be connected. By doing
        this, you create areas with the same naming conventions. These guarantee
        that the same names are used for master data, and also their
        synchronization in distributed system landscapes.
        Requirements
        As an independent logical system, the APO System must, in addition to
        the SAP R/3 Systems, be assigned to a business system group (BSG).
        Activities
        o   Choose New entries.
        o   On the New entries: Overview screen, specify the following
        o   information for the business system group:
            -   An alphanumerical key (maximum of 10 characters).
            -   A description.
        o   Save your entries.
    Example 1
    An APO System is to be linked with two SAP R/3 Systems (A and B), in
    which two different materials (for example a hammer and a screw), have
    the same material number (100). Both materials are to be represented as
    two different products in the APO System.
    Assign both SAP R/3 Systems to different BSGs. Assign the APO System to
    one of the BSGs.
    o   SAP R/3 System A (Material number 100 = Hammer) -> BSG A
    o   SAP R/3 System A (Material number 100 = Screw) -> BSG B
    o   APO System -> BSG A
    In order to avoid having two identical names and to be able to uniquely
    assign the material numbers, you need SAP extension APOCF005. This is an
    inbound processing product (transaction SMOD or CMOD).
    Material number 100 from BSG A receives, for example, product number 100
    in the APO System and material number 100 from BSG B gets product number
    100_B. This allows you to uniquely assign the materials.
    For inbound processing in the APO System, the following SAP enhancements
    are available as customer exits for master data:
    o   APOCF001 : Inbound processing location
    o   APOCF005 : Inbound processing product
    Example 2
    An APO System is to be linked with two SAP R/3 Systems (A and B). In SAP
    R/3 System A, a particular screw has material number 110. In SAP R/3
    System B, it has material number 120. Both material numbers are
    represented in the APO System by one product, with product number 110.
    Assign both SAP R/3 Systems to different BSGs. If possible, assign the
    APO System to the BSG whose data does not have to be renamed.
    o   SAP R/3 System A (material number 110 = screw) -> BSG A
    o   SAP R/3 System B (material number 120 = screw) -> BSG B
    o   APO System (product number 110 = screw) -> BSG A
    You use SAP enhancement APOCF005 to convert the local SAP R/3 material
    number 120, to the APO product number, 110.
    Note
    For the time being, this second scenario is only supported for material
    masters and product masters. If, for example, the same customer is used
    with different BSGs in R/3 Systems A & B, you must create two separate
    customer locations in the APO System. This applies for the vendor,
    plant, and other master data.

  • Datasource activation

    Hi All,
    After doing enhancements for an extractor in ecc, replicated the datasource in bi. When i try to load its giving, A version different from M version. I am unable to activate the datasource.

    Hanisha, You can activate a separate (single) datasource by opening it up in Change mode and clicking on the Activate button.  The program RSDS_DATASOURCE_ACTIVATE_ALL will allow you to activate all datasources in the source system you select. 
    One of the previous notes states that RS_TRANSTRU_ACTIVATE_ALL was for 3.x datasource activation.  This is FALSE.  This program is for activation of Transfer Structures.
    You are on your way.
    ...Dean Quigley

  • How do you copy/install a pre-configure client for Mexico

    Is there a pre-configured client for Mexico.
    If yes, how do you install pre-configured clients.
    Where do you get information on pre-configured clients
    Thanks
    Joe

    Hello Joe,
    actually, there is another possibility that might be interesting for you:
    http://service.sap.com/bestpractices
    At "Release Planning" -> Availability Matrix
    I can see that the country-specific baseline for Mexico is available for ECC 6.0, also, an updated version and a version for the Retail-industry is planned for Q3/Q1, respectively.
    The documentation DVD of the best practices explains in detail the business processes, master data etc. that will be activated in the system if you install the SAP Best Practices Baseline Mexico in your system.
    Best regards, Barbara

  • Directory Caching issue with Cisco Jabber client for Windows

    Hi ,
    I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
    Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
    Is there any automated way to remove the cache file? 
    Here is the detail of CUCM,Presence and Jabber.
    CUCM version: 9.1.x
    Presence          : 9.1.X
    Jabber              : 10.5 and 10.6

    Hello
    On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
    Network Device Enrollment Service.
    Our certificate for the CUPS were generated on this Certification Authority too.
    I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
    Enterprise Trust store for the users.
    But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
    I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
    Our partner left us alone with that unfortunately.
    Florent
    EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

  • Connecting multiple ECC Clients on same ECC system to BW system(s)

    Hello.
    We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time.  We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
    Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system.  The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about? Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'? Any and all comments are welcome as we have not yet acted on our ideas yet.
    Thanks very much for whatever comments you might provide,
    Geoff.

    We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
    No impact on the BW system. The only thing that you will have to take care of is that any process chains which fetch data from this DEV ECC system should not be put on periodic cycle because after disconnecting the ECC system, these would start failing.
    Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about?
    Again no impact on ECC system. As for the client connected earlier to sandbox system, just clear all the queues in RSA7, LBWQ
    Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'?
    No its not at all a bad practice

Maybe you are looking for