ECC EHP5 upgrade:is i mandatory to upgrade netweaver portal & BI systems

Hi Gurus,
Currently we are having landscape of :
1.SAP ECC6.0 SP stack at 17
2.Netweaver Portal 7.0 SP stack at 17
3.Netweaver BI 7.0 SP stack at 12
Currently, viewing BI reports using Portal.
We are planning to upgrade our ECC 6.0 system only to EHP5
My questions are:
1. Is it mandatory to upgrade netweaver portal and BI systems also.
2. We are very less dependent on BI. So, can we continue with the same old BI system with ECC6.0 upgraded to EHP5?
Please shed some light on this.
Thanks in Advance.
Regards
Balaji Nampally

There is no any specific details available for the same.. But it seems some BPs need to be upgrade on portals side..
SAP ESS 603(SP06)                                 BP ERP05 ESS 1.41
SAP MSS 600(SP17)                                 BP ERP05 MSS 1.51
SAP PCUI_GP 603                                 BP ERP05 COMMON PARTS 1.51
                                                      BP ERP05 HR ADMINISTRATOR 1.51
                                                      BP ERP05 SELF-SERV ADMIN 1.0
                                                      BP TECHNICAL INFORMATION 1.51
Pl provide if any has more details.. we are also looking for the same..
Thanks

Similar Messages

Compatibility between ECC 6.0 EHP4/NW 7.01 and Netweaver Portal 7.0 SP17

Hi,
Our system landscape consists of ECC 6.0 EHP4/NW 7.01 and Netweaver Portal 7.0 SP 14. We are thinking of upgrading our portal to SP 17. Will it lead to any compatbility issues with our ecc system? are there any dependencies?
Thank you.

Hi,
The easiest way to know what SAP NetWeaver SPs aligns with SAP ERP/ECC SP stack or any other app's SP stack is the following:
- logon on to http://service.sap.com/sp-stacks
- click on the appropiate app's SP stack . SAP ERP 6.0 (SAP ERP 2005) your case as it also covers EhPs too.
- In the resulting screen, select the ECC SP level you have (or want) and NW components you have
- The resulting list will indicate what the NW patches you need to be in synch.
I hope this helps,
Mike.

Is Solution Manger mandatory for upgrade to NW2004s ?

Is solution Manger mandatory for upgrade to NW2004S ?
Thanks,
BP.

SAP will not provide solman key. However it will provide a solution manager free for ERP software. The first system that should be installed is solman in the landscape. By making solman mandatory SAP wants to regulate the irregularities in the annual fees payment by the customers. It want their customers to habituate to this software, so it provided some of the usefull concepts in solman i.e central administration of all systems in the landscape, preparation of implementation projects using ASAP methodology, maintaining service level agreement reports, provides service desk option(ticketing tool), early watch alerts etc.
So upgrade to NW2004s it is mandatory that you have solman installed.
Please correct me if I am wrong.
Regards
kishore

Empty upgrade customizing view in release upgrade IMG

At customer side we are in a releaseupgrade from R/3 4.7 to ERP 6.0.
Now we want ro generate a project IMG with the view for upgrade customizing.
Our problem is, that we get no entries.
We tried to generate the view with all IMG-entries and all components.
Release is SAP ECC 6.0 (EHP 4) SP0005
Generating a delta IMG the system begins to generate.
From older projects (before EHP4) I know, that we got really much entries.
Any ideas?
Thanks in advance!
Gunther

Dear Gunther,
Kindly note that as new releases are developed, new customizing steps are added to the
system, which in turn, adds events to the IMG model. After an upgrade,
the Enterprise IMG must be regenerated to include these new tasks. Since
the Project IMGs are a subset of the Enterprise IMG, they must also be
regenerated.
Regarding your issue kindly try to regenerate the Enterprise IMG: transaction SPRO, menu
path: Basic Functions -> Enterprise IMG -> Manual extension.
Select the missing nodes and then generate.
Please take a look at the following notes which explain how to regenerate the IMG:
130688 - Project IMG must be regenerated after an
42272 - IMG problems after upgrade
916585 - Missing IMG Activity Texts in IMG Display
I hope this helps.
Regards,
Abhishek

Upgrade 8.1.7.4.1 DB & portal 3.0.9.8.0 to 10G

We have portal 3.0.9.8.0 running with 8.1.7.4.1
I need a good documentations for the followings.
1- upgrade database to 10G
2- upgrade Portal to 10G.
What I know that.
Even 8.1.7 database is supported to 10g, Portal is NOT.
1-I need to upgrade to portal 3.0.9.8.5 first.
2-Upgrade database to 9i (9.0.4)second
3-Upgrade to portal 9.0.xx
4-and finaly upgrade database and portal to 10G.
Please advise.
Many Thanks
Lausanne

If portal is used with Oracle E-Business Suite 11i, then I suggest you have a look at section 3 (Installation or Upgrade of Portal) of note: 305918.1. It lists all the steps on how to move from portal 3.0.9 to portal 10.1.4

I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

HT1338 I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

HP couldn't find its own apps with both hands and a flashlight.
As of Lion all scanning functions are incorporated natively in OS X. You can scan three ways:
Use Preview: File > Import from scanner
Use Image Capture
(Preview and Image Capture are both in your Applications folder.)
System Preferences > Print & Scan. Select your HP and use the Scan tab.
If you have HP's "Image Zone" software installed, you no longer need it and it no longer works anyway.

I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB. Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?

I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB to. Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?

You need to purchase 8 GBs as two 4 GB modules. Must meet these requirments:
Maximum Memory
8.0 GB
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

Steps how to upgrade HP EVA 6400 Storage Upgrade/ 3*Disk Enclosure/ 28*600GB 15K FC HDD

I want to know how to upgrade HP EVA 6400 Storage Upgrade/ 3*Disk Enclosure/ 28*600GB 15K FC HDD and Memory upgrade on Existing X3800 Network Storage Systems.

This appears to be for a commercial or non-consumer setup.
You may get a better response from here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I can't go beyond release 3.6 because it slows my system down to a crawl. When I back the upgrade out and go back to 3.6 my system is fine. Any suggestions?

I can't go beyond release 3.6 because it slows my system down to a crawl. When I back the upgrade out and go back to 3.6 my system is fine. Any suggestions?

Does that PC meet Firefox 4.0+ system requirements for hardware? <br />
Firefox 4.0+ versions are considerably different from earlier versions. <br />
http://www.mozilla.com/en-US/firefox/6.0/system-requirements/
* Pentium 4 or newer processor that supports SSE2
* 512MB of RAM
* 200MB of hard drive space

I have Mac OS X 10.5.8. How do I upgrade to Snow Leopard to upgrade to Mountain Lion?

I have Mac OS X 10.5.8. How do I upgrade to Snow Leopard to upgrade to Mountain Lion?

Your machine is likely too dated to run 10.8 at all , or if it does will run slow.
It won't run your PPC based software or hardware drives for external hardware.
10.6 will run your PPC software and likely is best for that machine performance speaking, Software Update to 10.6.8 and stay there.
You better do your research first.
Things to consider before upgrading OS X
Or else get this
Why is my computer slow?
and then have to do this
How to erase and install Snow Leopard 10.6
or this
How to revert your Mac to Snow Leopard
but before you do anything, you really need to do this
Most commonly used backup methods

I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong

Hi Mark,
I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
Mick

Moving this discussion to the Downloading, Installing, Setting Up forum.
Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased. You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Can I still get Photoshop CC upgrades if I don't upgrade from Mac 10.8.5 to 10.9

I don't want to upgrade my os, because I need my folders to open in a new window with a double click and OSX 10.9 and up won't let you do that and I'm scratching my head, because I got the following message from Adobe today:
Important information about Creative Cloud and Mac OS X
Dear Creative Cloud Member,
We’re hard at work on the next major release of Creative Cloud, and wanted to share some information on updated operating system requirements for members using Mac OS X. In order to take advantage of the latest operating system features and technologies, the next major release of Creative Cloud will require Mac OS X 10.9 or higher.
You’ll still be able to install and run the current Creative Cloud apps on older versions of OS X, but you won’t be able to install or run the next release of Creative Cloud until you upgrade to OS X 10.9 or higher.
For more information, including how to upgrade Mac OS X for free, please visit our Creative Cloud blog page.
The Creative Cloud Team
My question is, will I still be able to upgrade Photoshop CC is I don't upgrade my OS.
Thanks,
Ken

here are the specs, System requirements | Photoshop
so yes, photoshop cc 2014 works with osx 10.7 or better.

How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

When I go to Central Admin > Upgrade and Migration > Manage Databases Upgrade Status, I have 2 content databases which have the status:
Database is up to date, but some sites are not completely upgraded.
How can I determine which sites are not completely upgraded?

Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
using below PowerShell cmdlet.
Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
Get-SPDatabase | Format-Table Name, ID
Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
Test-SPContentDatabase WSS_ContentDB_Name
If you find any missing file issue in DB then resolve these issue to upgrade content database.
(verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
against a content database currently attached to the farm, or a content database that is not connected to the farm )
Use the Upgrade-SPContentDatabase cmdlet
to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
Upgrade-SPContentDatabase WSS_Content
reference:
http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

I have an airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it

ECC EHP5 upgrade:is i mandatory to upgrade netweaver portal & BI systems

Similar Messages

Maybe you are looking for