ECC/ERP Upgrading to EHP4 - basic steps?

Just installed fresh ERP/ECC 6 from disks labeled EHP4 ready. Needing to upgrade immediately to EHP4. To do this, my understanding is that I need to initiate a maintenance transaction from solution manager to start the process and then proceed (basically following these directions http://sap.wsteinert.com/blog/2009/10/implementing-the-ehp-4-part-2/ ).
Can anyone describe (in detail) the maintenance transaction process and what I have to configure on the solution manager side to get this up & going?
Also, does the EHP4 process require that I download the components? It looks like I already have some media that may have EHP4 components on it. Can I just do a local upgrade using the media?

> Can anyone describe (in detail) the maintenance transaction process and what I have to configure on the solution manager side to get this up & going?
You have to Create a maintenance transaction in the SAP Solution Manager and select the
appropriate technical usages in order to calculate the corresponding software
packages.
Refer https://websmp204.sap-ag.de/~sapidb/011000358700000293582009E.PDF
> Also, does the EHP4 process require that I download the components? It looks like I already have some media that may have EHP4 components on it. Can I just do a local upgrade using the media?
refer https://websmp104.sap-ag.de/~sapidb/011000358700000931872009E .
regards,
Nibu Antony

Similar Messages

Upgrading ECC 6.0 to EHP4

Hi guys,
I am a little kid in SAP. Before 30 days i don know what SAP is? am a newly joined trainee in basis in a concern.
now am given a oppurtunity to work on a project of "Test upgrade of Production server ECC 6.0 to EHP4".
i've to start my project. i've been preparing about the EHP4. but am not clear about the concept.will u guys give me the link for this upgrade guide??
i've seen that EHP4 has released as a new tool of installation unlike as other upgrade versions. And it allows to choose the netweaver component 7.0 for portal upgrade. Am not sure of this.please any guys, will u please elaborate about this concept??
And another thing is, my boss wants business suite 7.0 in that. i've no idea of business suite. when i asked my senior, he told that if u upgrade to EHP4, business suite components will be added to tht enhancement package. will u please exlain weather business suite is available in EHP4?
Thanks and Regards,
Santhosh.
Edited by: santhoshkumarvellore on Sep 4, 2010 4:40 PM

Hi,
Please get the upgrade document from servicemarket place.
https://websmp204.sap-ag.de/instguides or https://service.sap.com/instguides
You can do it from EHPI installer tool. this document also you can get it from above website.
From solution manager you can get the key and Stack file. download required support stack as per the stack file.
follow the steps in upgrade/Ehpi installer document.
Thanks and Regards,
Jibin,
Edited by: jibin singh on Sep 7, 2010 2:54 PM

Failed to upgrade from ERP 6.0 EHP4 to EHP5

Dear SAP Gurus,
we are running ERP 6.00 with EHP4 (HCM-component) based on Windows 2003
SP2 X64 and SQL Server 2005 SP4 (64-bit).
We are using SAP Kernel Unicode 7.01 PL 133 (64-bit).
We intend to upgrade from EHP4 to EHP5.
Upon running SAPehpi, we encountered issue which stopped us from
proceeding with the upgrade.
Case 1: Direct upgrade to 605
The upgrade failed on PREP_INPUT/VERSCHK_INI with error message: The
following combination is not supported (SAP_APPL 600, SAP_BASIS 701,
SAP_ABA 701).
Case 2: Upgrade SAP_APPL component from 600 to 604 (due to the above
error message)
The upgrade failed on PREP_INPUT/VERSCHK_INI with error message:
Release '701' of component SAP_BASIS is too new.
Case 3: upgrade via SAINT is not supported by SAP. When uploading the
Stack XML file, we got error saying that the stack is not supported.
Attached is the complete list of the current SP Level of Installed
components.
Please advise on how we can perform the upgrade to EHP5.
Many thanks in advance.
regards,
Denny

The thing is Solution Manager was able to produce the XML file during the previous upgrade to 604 (the one without SAP_APPL 604).
So how can it not be supported by SAP?
If it is not supported by SAP, how can I proceed from here?
Component Software C SP-Level Support Package Short description of the component
SAP_ABA 701 0007 SAPKA70107 Cross-Application Component
SAP_BASIS 701 0007 SAPKB70107 SAP Basis Component
PI_BASIS 701 0007 SAPK-70107INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0003 SAPKITLRD3 SAP Solution Tools Plug-In
SAP_BS_FND 701 0008 SAPK-70108INSAPBSFND SAP Business Suite Foundation
SAP_BW 701 0007 SAPKW70107 SAP Business Warehouse
SAP_AP 700 0021 SAPKNA7021 SAP Application Platform
WEBCUIF 700 0008 SAPK-70008INWEBCUIF SAP WEBCUIF 700
SAP_APPL 600 0018 SAPKH60018 Logistics and Accounting
SAP_HR 604 0035 SAPKE60435 Human Resources
EA-IPPE 400 0018 SAPKGPID18 SAP iPPE
EA-APPL 600 0018 SAPKGPAD18 SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS 600 0018 SAPKGPDD18 SAP Enterprise Extension Defense Forces & Public Security
EA-FINSERV 600 0018 SAPKGPFD18 SAP Enterprise Extension Financial Services
EA-GLTRADE 600 0018 SAPKGPGD18 SAP Enterprise Extension Global Trade
EA-HR 604 0035 SAPK-60435INEAHR SAP Enterprise Extension HR
EA-PS 600 0018 SAPKGPPD18 SAP Enterprise Extension Public Services
EA-RETAIL 600 0018 SAPKGPRD18 SAP Enterprise Extension Retail
FINBASIS 600 0018 SAPK-60018INFINBASIS Fin. Basis
ECC-DIMP 600 0018 SAPK-60018INECCDIMP DIMP
ERECRUIT 600 0018 SAPK-60018INERECRUIT E-Recruiting
FI-CA 600 0018 SAPK-60018INFICA FI-CA
FI-CAX 600 0018 SAPK-60018INFICAX FI-CA Extended
INSURANCE 600 0018 SAPK-60018ININSURANC SAP Insurance
IS-CWM 600 0018 SAPK-60018INISCWM Industry Solution Catch Weight Management
IS-H 600 0023 SAPK-60023INISH SAP Healthcare
IS-M 600 0018 SAPK-60018INISM SAP MEDIA
IS-OIL 600 0018 SAPK-60018INISOIL IS-OIL
IS-PS-CA 600 0018 SAPK-60018INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT 600 0018 SAPK-60018INISUT SAP Utilities/Telecommunication
LSOFE 600 0018 SAPK-60018INLSOFE SAP Learning Solution Front-End
SEM-BW 600 0018 SAPKGS6018 SEM-BW: Strategic Enterprise Management
ST-A/PI 01M_ECC600 0001 SAPKITAR7F Application Servicetools for ECC 600-605
VIRSAHR 530_700 0012 SAPK-53312INVIRSAHR SAP GRC Access Controls 5.3 for 700 HR S
VIRSANH 530_700 0014 SAPK-53314INVIRSANH SAP GRC Access Controls 5.3 for 700 HR a

SAP ERP 6.0 EHP4 upgrade from SAP R/3 4.7 1.10

Dear Experts,
Our client is going to upgrade current landscape SAP R/3 4.7 1.10 to ERP 6.0 EHP4. The Source system O/s is AIX 5.3 and database is db2 8.1. Client procuring new hardware for the target release ERP 6.0 landscape and the O/s is going to be AIX 7.1 and databse would be db2 9.7 FP3.
As part of the upgrade we are going to do initial upgrade in the mock server and vendor is going to provide mock server with AIX 7.1 O/S. Current database size is 100GB, hence we are going to copy the production server data into the mock server using export and import method,
Here my doubt is can i install db9.7 directly and do the import (using compitable kernel)?, insteady of installing source database version 8.1 and later upgrading to db2 9.7 . Please clarify me whether can i go head and install the db2 9.7 and do the system copy using R3load.
Thanks and Regards,
Seshu

Seshu Mannepalli wrote:
> As part of the upgrade we are going to do initial upgrade in the mock server and vendor is going to provide mock server with AIX 7.1 O/S. Current database size is 100GB, hence we are going to copy the production server data into the mock server using export and import method,
>
> Here my doubt is can i install db9.7 directly and do the import (using compitable kernel)?, insteady of installing source database version 8.1 and later upgrading to db2 9.7 . Please clarify me whether can i go head and install the db2 9.7 and do the system copy using R3load.
Hello,
You can go ahead for IMPORT with DB 9.7.
We completed an OS/DB Migration Project (which involves system copy using EXPORT/IMPORT) and we utilized direct newer version of DB2 on the target during IMPORT.
But please confirm whether the kernel of your release would work fine with DB 9.7 or not. Otherwise, there is no problem in going for higher version of DB2 here.
Small question - Why you want to test the Mock Upgrade on DB2 version which is different than the current version on production server ? Or are you planning to upgrade your current DB2 8 to DB2 9.7 BEFORE the SAP Upgrade on all the servers - then the testing is OK I think (however OS is still the different - Or may be you will go for system copies for this too !)
Thanks

SAP ERP 6.0 EHP4 upgrade from R/3 4.7 NUC

We have R/3 System which is 4.7 Non-Unicode. We are not using MDMP and only have single code page. Can I upgrade directly to Non-unicode version of ERP 6.0 EHP4 or do I need to use CU & UC. I read some where that EHP4 cannot be used on Non-Unicode versions.

> 2 years later, we installed EHP4. We are still non-unicode.
If you don't use Portal or other Java application that's fine. As soon as Java comes into place the backend system must be Unicode:
Note 975768 - Deprecation of Java features with non-Unicode Backend
Markus

ERP 6.0 EHP4 SR1 Upgrade Unix Oracle issue with /STARTUP

We are in the process of doing an ERP 6.0 EHP4 SR1 Upgrade Unix Oracle Upgrade. We have ran into a problem running the /STARTUP, we are using the Upgrade Master DVD 51036889 as well as have down loaded it from service market place and jce_policy-1_5_0.zip as well as the one on SAP service market place. When we execute the command /STARTUP jce_policy_zip=jce_policy-1_5_0.zip the job starts and runs down to where the controller for port 4241 starts and then hangs. If we control C out and go to the /usr/sap/SID/upg and run /STARTUP it runs all the way through setting up both 4241 controller and 4239 controller, we then go to the web browser and launch the Gui => logon as administrator => upgrade roadmap screen pops up it is set on the initialization phase we hit next and nothing happens after that, we don't get the ABAP tab or the progress bar. We would appreciate any help.

Hi Jerry,
The first time you run STARTUP its run from the NW7 EHP1 SR1 DVD. Just wanted to confirm that your running it from this DVD. This extracts and setups your /usr/sap/<SID>/upg directory. It sounds like this directory hasn't been setup correctly which is why your not seeing anything when you login to the GUI.
Can you confirm that you got your JCE files from SWDC -> SAP Cryptograpic Software ?
OSS Note - 1240081
http://service.sap.com/swdc > Download > SAP Cryptographic Software
I had to use the JCE file from here to get my upgrade to work. What OS are you on?
Hope this helps.
Cheng

Re: Upgrading ECC 6.0 to EHP4 on Linux 32 bit.

Hi gurus,
    Am new to SAP. Basis. i've started a project on "Test upgrade of PRD server ECC 6.0 to EHP4" I finished installtion of SAP ECC 6.0 and took backup from PRD server and restored it in my test server. now i've to through my upgradation phase.
           Now i configured in solution manager and started maintenance optimizer. Now my problem is wen i configured in maintenance optimizer for the first time, i choose in 2. select files phase i chose the following options.
    2. select files --> calculate files automatically-Recommended.
                           --> Enhancement package
2.1 choose stack---> i tick 'media' only.
2.3 stack dependent files----> its selected some files showing totally 623 files ready to be download in download basket.
but due to collapse in download manager i missed some files..so i started the maintenance optimiser again in a new transaction. but i can find its selected some files by default including 'media; option with other options also. in the next phases also it defaultly selected all the files required for upgradation. but this time i can see only 298 files ready for downloading.. i dono which one is correct one. shall i go the first transaction or he new transaction.. please help me guys..
Thanks and regards,
Santhosh Kumar.

Hi,
Better make new transaction and choose again otherwise if you will miss some file then you will get error in upgrade.
Thanks
Sunny

Error in Upgrading ECC 6.0 to EHP4

Hi sap gurus,
Am upgrading ECC 6.0 to EHP4. now am in configuration phase. in the EHP_INCLUSION phase am getting a error:
" Severe error(s) occured in phase PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION!
Last error code set: Stack inclusion failed: patch level 53 for component EA-HR is too low, destination level is already at 55"
Then i downloaded the required patches of patch level service pack 56-61 and continued, but getting the same error..after that i checked the current status of the server. its having EA-HR component till service pack 55. but when i checked the stack XML file, its showing only EA-HR component SP02 to SP53. i think this error is due to the mismatch in stack XML file. i dono what should i do for this. should i need to alter the stack XML file manually? Please help me guys. my upgradation is hanging. please help me guys.
Thanks and regards,
Santhosh Kumar.

it is fine to assume that the stack file is mismatched with the system as the file suggested the ehpi to patch until level 53 but the original system already up to 55. if you are set on editing the xml file and this is not for production, you could try to remove the HR part entirely, just use find and try to remove all of that content that related to HR, be careful with the tag. just delete <software-component> until </software-component> for the HR part, remember to backup original file. it will avoid the error. Since the xml suggested 53 and the system already at 55 and assuming all other components correctly defined in the stack, i think it is fine to continue, and if i'm not mistaken after calculation with stack file, ehpi will offer to add support package level manually, you can add HR level until 61 or just leave it at 55 and add manually with spam later.
if this is for production system, i think you should go with AC suggestion, just find whats wrong with solman and reinstall using the right xml file.
Edited by: Henry Hsu on Oct 26, 2010 4:40 AM
Edited by: Henry Hsu on Oct 26, 2010 4:54 AM

Can't find upgrade master dvd for ERP 6.0 EHP4 !

Where can I find the upgrade master dvd for upgrade to ERP 6.0 EHP4 (windows/oracle) ? Does anybody knows the right materialnumber?
My collegues has copied the relevant dvds from sap upgrade dvd-package to disk and I don't find th "upgrade master dvd" with STARTUP.BAT.
I looked into download area service.sap.com/swdc:
My Company's Application Components->SAP ERP->SAP ERP ENHANCE PACKAGE-> EHP4 FOR SAP ERP 6.0 / NW7.01
but there are only upgrade export dvs, language dvd, etc, but NO Upgrade master dvd, too!!!
Kind Regards,
Uta

Dear Ute,
i use this one "Number 51036889"
it is the Upgrade Master from NW701 which is also for EHP4.
Its located under the EHP1 Tree:
Installations and Upgrades" SAP Application Components" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" SAP EHP1 FOR SAP NETWEAVER 7.0.
hope this helps
Regards
Bjoern

Issue in extraction phase in ERP 6.0 EhP4 upgrade

Hi All,
We are having issues in the Extraction phase of the ERP 6.0 EhP4 upgrade.
The system is being upgraded from ERP 6.0 SR3 to EhP4.This is on windows server 2003 with Oracle 11 G as backend.
In the extraction roadmap in phase "PREP_IMPORT/SUBMOD_TOOLIMPORT_POST/RUN_GENPUTTBSHD",
we are getting the following error message and this is not allowing us to move forward though the background job "RS_GENERATE_PUTTB_SHD" also has completed successfully.
"Missing log file of report "RS_GENERATE_PUTTB_SHD", matching "RS_GENERATE_PUTTB_SHD\.RDI"."
Any help on this is highly appreciated.
Thanks in advance.
Regards,
Murali Narayanan
Edited by: Murali Narayanan on Jun 10, 2011 2:03 PM
Edited by: Murali Narayanan on Jun 10, 2011 2:05 PM

"Missing log file of report "RS_GENERATE_PUTTB_SHD" --> for this error, i would guess that this RS_GENERATE_PUTTB_SHD phase failed to run which cause no log to be generated. Try to find out what caused it failed.
go to $DIR_PUT/log, sort descending all the log by modified time, check top most logs one by one until you figured out the cause of the failed process.

Errors in phase MAIN_SHDIMP/SHADOW_IMPORT_INC for upgrade ERP 6.0 EHP4

Hello,
I am executing the upgrade to ERP 6.0 EHP4-Stack4 and in the phase MAIN_SHDIMP/SHADOW_IMPORT_INC, i have the follow error:
"SHADOW IMPORT ERRORS and RETURN CODE in SAPK-40001INCPRXRPM.FSD
2EETW165 Function "/RPM/RELATION_MODIFY (/RPM/CONFIG|15)" does not fit into the existing function group "(/RPM/RELATION_DATA|02)".
Long text:
    Cause
      A function module with LIMU FUNC ... was transported in the transport
      request.
      An import is only possible if this function module belongs to the same
      function group in the target system and
      has the same internal number as in the source system.
      These conditions were not observed in the target system.
      This problem can occur,
      if an entry LIMU FUNC ... is included in a transport request manually
      in the object list editor,
      or if a function module is deleted, and then created again under the
      same name in another function group, and deletion and creation are
      recorded in the same change request.
    System Response
      The function module was not imported.
    What to do
      You can remove the error by making another transport from the source
      system. Transport the affected function groups once more in their
      entirety. To do this, use the transport object R3TR FUGR ... .
      You can avoid the second type of error (deletion and creation in
      another function group) as follows:
      In the ABAP Workbench use the function <LS>Reassign</>, or record the
      deletion and the new creation in separate change requests.
      Release the change request with the deletion before you release the
      change request with the new creation.
1 ETP111 exit code           : "8"
I don't found the function module or function group in the system, this system is the development instance.
Regards, Alberto.

Hi,
I have checked the link before to open my question, but I can't or don't follow the instructions:
1. Ensure Namespace /RPM is modifiable in SE06
2. Call transaction SE37
3.Enter /RPM/RELATION_MODIFY
4.Select Function module-> Other functions-> Rename
5.Rename it to /RPM/RELATION_MODIFY_OLD
6.Release the request if one was created in the process
7.Restart the phase
The Function Module and the Function Group does not exist in our system. And when I can to create the Function Gorup, I have the follow error in the SE80: "Namespace /RMP/ does not exist", and when I try to create the namespace /RPM/ I don't have the "repair license".
I'm using the EHPI Upgrade tools for the EHP4.
Regards, Alberto

Upgrade to EhP4/NW 7.01 in ECC

We are on ECC 6 and BI 700.The Basis team is planning for an upgrade to EhP4/NW 7.01 in ECC . Does that mean the bi 7 is upgraded with EHP1? Can some one please clear this. What does NW 7.01 in ECC mean?
Thanks,

Hi,
ABA Support Package 20 for 7.00
Basis Support Package 20 for 7.00
BW Support Package 22 for 7.00
It appears that the BI system is separate as the component levels here do appear to be
from BI system rather than having ECC components also.
Your SP stack level looks to be SPS20 which is quite old and should be updated before
updating system to EHP1.
Please refer to the following documentation:
1142832 - Installation Enhancement Package 1 for Netweaver 700
1146578 - Central Note: Upgrade to Systems on SAP NetWeaver 7.0 EHP1
1276895 - Add. info. about Upgrading to SAP Solution Manager 7.0 EHP1
1248905 - SP Equivalence for update/upgrade to EHP 1 for SAP NW 7.0
Also you can refer to the Ehancement Package Upgrade Guide at
service.sap.com/instguides
-> Installation & Upgrade Guides
-> SAP NetWeaver
-> SAP NetWeaver 7.0 (2004s)
-> Upgrade
Regards,
Aidan

Impact of ERP Upgrade from 4.6C to ECC

Hi All,
What is the impact and variations/additons with Impact of ERP Upgrade from 4.6C to ECC from Varinat configuration side.
BR,
Krishna

hi krishna,
You may loose some of the variants becasue of changes happened during upg for ECC600.I have faced certain problems.
I know in the upgrade there is a phase(RSUVAINT(2) not sure) which does a backup of all variants and restores in the end.
regards,
vamshi.

ERP 6.0 EHP4: productversion/main instance in SMSY ?

I had a problem with MOPZ when searching for the newest HR Supportpackages (LCPs for Germany) for a ERP 6.0 EHP4 system. The SAP-system was part of a logical component Z_CORE... with product version ERP 6.0. (The details below header data showed EHP4 for ERP 6.0, but the leading product version below "installed productversion" was ERP 6.0. So it was only possible to find HR 600 packages but not the correct HR 604 packages.
I deleted the system out of the logical component Z_CORE...and changed the leading productversion to "SAP ERP Enhancementpackage, Productversion EHP4 for SAP ERP 6.0". Afterwards it was necessary to change the main instance from automatic "SAP Integration for SWIFT" to "Central Applications".
Then I created a new logical component Z_CORE...EHP4 with the same productversion and added the <SID>:<clnt> to the log. component. Then I added my new component Z_CORE...EHP4 to the solution and then I was able to select the files manually in MOPZ:
productversion "EHP4 for ERP 6.0"
SID= <SID>
Button "Select files for EHP4 for SAP ERP 6.0"
Entry by Component
Human Capital Mgmt
SAP HR 6.04 etc.
Several questions:
1) In one note I found that even with EHP4, the product in SMSY should be "ERP 6.0" , but that does not work. Any experiences ?
2) Why is the main instance after changing the leading product "SAP Integration for SWIFT" ? Make no sense for me....
3) What is the difference between
a) SAP ERP Enhancementpackage /EHP4 for SAP ERP 6.0/NW 7.01
b) SAP ERP Enhancementpackage /EHP4 for SAP ERP 6.0
4) I am bit unsure if it it also necessary to select "Human Capital Management" as additional instance (in addition to the "Central Applications" which is the LEADING main instance.
SAP seems to use the same name in different terms . When upgrading to ERP 6.0 EHP4, it was not necessary to select technical usage "Human Capital Mgmt" because it is included in "Central Appplications", but in marketplace the SPs could not be found below "Central Applications" but only below "Human Capital Mgmt".
5) Freshly after upgrade, I started data transfer from SLD. Then as product/instance ECC VPACK was generated and I had to change it manually to ERP (which now turned to be wrong). Looks like the solman sometimes has strange ideas... ?
Best regards
Uta

Hi Sunny,
o.k. I found in the guide:
You can choose one of the following two product versions for SAP enhancement package 4:
- EHP 4 for SAP ERP 6.0
o Use this product version for ABAP-only systems and if you do not want to update your connected Portal or BI to 7.01.
- EHP 4 for SAP ERP 6.0 / NW 7.01
o Use this option for dual-stack systems.
o Use this option if you want to update your Portal or your BI system to 7.01.
So, the know the difference now.
For Productversion:
The MOPZ with product version ERP 6.0 didn't work: packages couldn't be find through MOPZ, so the information from the guide
Even if you already have installed SAP enhancement packages, register the system as a regular SAP ERP 6.0 system! Also, make sure that your system is not registered as an SAP ECC 6.0 system!
seems to be wrong or maybe this is only valid for a system which will be brought to EHP4 afterwards.
Regards,
Uta
Edited by: Uta Hedemann on Dec 22, 2009 4:44 PM
Edited by: Uta Hedemann on Dec 22, 2009 4:55 PM

SAP Notes for installing ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1

Hello members
The last time I install SAP on IBM i was about 3 years ago with ECC 6 on NW 7.00 on IBM i V5R4. Now, I have to install ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1 for my new customer (only the ABAP ERP components - not CRM, SCM, SRM or Java stack). I try to first gather all important SAP notes that would be useful for me in doing the installation. By far, I identify note 1234455 (NetWeaver 7.0 EHP1/Business Suite 7 - IBM i) and 1432783 (Known Issued with IBM i 7.1). Is there any other notes I should be aware of for a successful installation?
I also need to identify the list of installation DVD that I need for this installation but, so far, I can identify DVD 51038620 (Install Master) and 51036902 (Install Export). I know I need more DVD than these two but I could not find any SAP notes that list all the DVD number I need.
Any suggestion would be very much appreciated?
Thanks.

Hello Satid,
nice to hear from you )
As you already pointed out, it is always useful, to read and apply the notes ...
What is special here ?
- Installation runs similar to your ecc6 stuff from 3 years ago - we typically replace the kernel of the kernel CD with a new patch level on the CD already.
- the big point is, that the system does NOT have EHP4 installed when you are done with SAPinst ;-(
you do have NW 7.01 and ERP6.00 => you have to start SAPEHPI immediately after that for all the components, that you require on EHP4. This is 95% of an complete upgrade => the installation is 2 . 3 times the effort of what wou would expect ...
If you do have questions, don't hesitate and contact us.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

ECC/ERP Upgrading to EHP4 - basic steps?

Similar Messages

Maybe you are looking for