ECC-GTS : Partner Replication not Working

Hi Guys
We are facing problems when trying to replicate master data from ECC to GTS.
Getting the error message
Of 1 selected partner(s), 0 were processed successfully
Message no. /SAPSLL/PLUGINR3111
Diagnosis
Not all partner masters have been processed successfully.
Procedure
You can access the process protocol in the Legal Service system. This protocol contains more information concerning the type of error that has occurred.
Am sure that there is some changes that needs to be done in the message type DEBMAS, but not sure what i am missing here?
Thanks
Carl

Hi Carl,
That table holds the settings for logging. You can reach it through configuration, via IMGpath:
SAP Global Trade Services
> General Settings
>> Assign Control Profile for Logging
You should make sure that you have entries for the Business Partner, sub-objects /SAPSLL/BP_DISTR and /SAPSLL/PARMA. Generally you should assign Profiles MD_BP and MD_BPM respectively, but whilst you are encountering difficulties, it could be useful to assign GN_TST (General: Full Log) instead.
I hope that helps.
Best regards,
Dave

Similar Messages

After upgrading from 4.6C to ECC 6.0 templates not working in smartform

Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
Abhishek

Hi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran

BP replication not working

Hi Experts,
I tried syncronize the ISU BP data with the CRM BP data. I used the tcode CRMM_BUPA_MAP & selected the option 'Gather Information'.
This method worked in test environments but not workign in the production. What are the other options to replicate the BP data in ISU to CRM
Please find the screenshot [here|http://img845.imageshack.us/img845/3817/screenshotsxq.jpg]

Hi,
Does you cusomize business partner replication for Utitlities?
Please go to
https://websmp203.sap-ag.de/utilities
SAP CRM for Utilities
Cookbooks&Guidelines
IS-U-specific Set-up and Load Guide for Business Partner
Denis

Partner Determination Not Working in Opportunity

Hi,
We are using Z-partner Functions Which are Determined using Partner Determination Procedure in Lead but it is not Copied to opprtunity.
we used Different partner procedure for opportunity but is not coping from Lead. We tried to Modify the partner Procedure used for Lead and use it for Opportunity but it is not working.
can any one suggest were we might be going wrong.
With regards,
Selvam t

Hello Selvam,
there is no copy procedure during partner determination. If you create a followup doc or copy an existing document - the partner det. runs again. According to your settings in the PDP the partner are determined by access sequence and source. That means if you want partners which should be copied from predecessor then you should use the source COM_PARTNER_A like i.e. access sequence 0001 in standard.
I hope this help,
Regards
Rene

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

P2P Replication Not working after DDL Chage has been replicated

Hi Guru,
I am using SQL Server 2008. And I have configured the DC DR P2P replication for High availability.
In DC i had dropped one column. after that my replication is not working i am getting "A DDL change has been replicated error" in replication monitor.
In order to resolve this issue i had tried to drop the same column in DR. But still the replication didn't work.
Please help me to resolve this issue.

Hi,
You have two options to make schema changes to the replicated database.
1. Drop the replication, make the changes, and recreate the replication.
2. Make the changes and let P2P replication take care of the changes.
If you drop the column from the table at the Publisher by using
ALTER TABLE <Table> DROP <Column>, the column will also be dropped from the table at all Subscribers.
In this case, the column was dropped in application. I have not tested this situation. I agree with Ashwin. You may recreate the replication to resolve the issue.
Reference:
Making Schema Changes on Publication Databases
http://msdn.microsoft.com/en-us/library/ms151870(v=sql.100).aspx
Thanks.
Tracy Cai
TechNet Community Support

WAN replication not working for objects

I am trying out the WAN replication example from the Tangosol website. I got the Boston-London example working. However, it seems to only work for simple types like String, int, etc. Objects like hibernate, compressed string are not replicated across. Is more config added for this to work?

Hi Sham,
In one of environment we are using publish and author server. Custom comments are replicating on Author environment. We are not using custom workflow or JCR observation.Created one more environment for Production setup where 2 publish and 1 author instance. For this comment are not auto replicated on Author instance.
Default comment modification and comment activation launcher are in place, no change in this. Does it not working due to additional Publish Instance and if so what additional setting will required to address it ?
Thanks
Yogesh

Session replication not working with OAM clusters

Hi,
We have a enterprise deployment of OAM 11.1.1.5.0, and we are using a cluster or OAM managed servers. Server#A (fano1) hosts the admin + OAM managed server, server#B (fano2) hosts the second OAM managed server.
What we have noticed in general is that when accessing the OAM admin console (on server#A, fano1), we get prompted to login and then we get a "Error 404--Not Found". It seems that we are getting authenticated against server#B (fano2) and our session is not getting replicated to server#A (fano1). After exactly 60 seconds, if we were to simply reload the URL in the same browser window, we can get in. This is with "database replication of sessions" enabled. If I disable that, then I will never be able to login to the admin console.
The admin server logs contain the error message:
[2011-12-22T16:41:52.471-05:00] [AdminServer] [WARNING] [] [oracle.oam.agent-default] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: f4a544324f1d0f29:2ccc59c7:13467aaf744:-8000-0000000000000182,0] [APP: oam_admin#11.1.1.3.0] OAM Server request failed: OpCode = 19 [GetSessionInfo], Returned Status = Major code: 71(SessionInvalid) Minor code: 2(NoCode)
[2011-12-22T16:41:52.473-05:00] [AdminServer] [WARNING] [OAMAGENT-00406] [oracle.oam.agent-default] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: f4a544324f1d0f29:2ccc59c7:13467aaf744:-8000-0000000000000182,0] [APP: oam_admin#11.1.1.3.0] Invalid authentication token: AccessService INVALID_USER_SESSION
One other point is that we are using virtual IPs and each server (Admin + 2 managed servers) is listening to its own virtual IP.
Does anyone have any suggestions on what this could be. My thinking is that coherence based session replication is not working. However I have no way to say that for sure. Is there any way to enable some more logging from either OAM or Coherence that would help verify if sessions are getting replicated or not? I have tried putting the entire system in TRACE:32 but that generates too much data.
Thanks
Aspi Engineer
Putnam Investments

Did you get solution to this one.
ThanksKrishna

Reverser Replication not working for 2 Publish Instance

We have setup environment for 1 author and 2 Publish servers. Configured replication agent and reverse replication agent for both Publish Instances. For custom created comments (Java code from external Portal to create comment node) then reverse replication does not replicate comment on Author Instance. But when I post comment for campaign through CQ publish environment then it works properly. It gets replicated on Author Instance. So can anyone let me know what could be missing part for comments generated through custom java script.
Yogesh

Hi Sham,
In one of environment we are using publish and author server. Custom comments are replicating on Author environment. We are not using custom workflow or JCR observation.Created one more environment for Production setup where 2 publish and 1 author instance. For this comment are not auto replicated on Author instance.
Default comment modification and comment activation launcher are in place, no change in this. Does it not working due to additional Publish Instance and if so what additional setting will required to address it ?
Thanks
Yogesh

Lync 2013 Edge replication not working

hi, I have a Lync 2013 Edge replication issue - it is simply not working.
UpToDate           : False
ReplicaFqdn        : LyncEdge.contoso.com
I have already checked the following:
1) telnet from FEP servers to the Edge sever on port 4443 is working
2) Certificates are installed correctly - Lync Federation, Voice/Video to Skype, Lync Mobile is all working fine.
3) Replication traffic checking showing the following error in XDS logs:
(000000000126DB35)[FileTransferTask(11, 9/03/2015 2:44:24 PM): {TASK_NOT_STARTED, fromReplica, [lyncedge.contoso.com, HttpsWebService, 4443], 0}] Failed to copy files from replica. Exception: [System.ServiceModel.Security.MessageSecurityException: The HTTP
request was forbidden with client authentication scheme 'Anonymous'. ---> System.Net.WebException: The remote server returned an error: (403) Forbidden.
   at System.Net.HttpWebRequest.GetResponse()
   at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpChannelUtilities.ValidateAuthentication(HttpWebRequest request, HttpWebResponse response, WebException responseException, HttpChannelFactory factory)
   at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory, WebException responseException, ChannelBinding channelBinding)
   at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Rtc.Xds.Replication.Common.IReplicationWebService.DownloadFiles(String senderFqdn, String sourceDirPath, String tempDirPath)
   at Microsoft.Rtc.Xds.Replication.FileTransfer.FileTransferTask.CopyFilesFromReplicaUsingWcf(String fromDir, String tmpDir, String toDir)]
I have checked certificate stores: there are only 34 certificates in the Root folder and the SendTrustedIssuerList reg. key has been configured, which did not solve the issue.
Any idea how to troubleshoot this or possible root causes?

Try Test-CsComputer on the Frontend Servers and the Edge Servers. This should check Windows Firewall exceptions are correct. Then check permissions on your Lync fileshare. You can also try to reinstall CMS Database with the following command (user must be
memeber of CsAdministrator group and sysadmin group of SQL Server)
Install-CsDatabase -CentralManagementDatabase -SqlServerFqdn CMS.FQDN
-SqlInstanceName DBInstance -Verbose

2K8 DFSR Replication not working

We moved from 2003 servers to 2008 servers a few months ago, recently we noticed that replication between server1 & server2 is not working, as the initial copy from the primary to the secondary semed ok, but nothing has replicated since. When you run
the health diagnostics in DFS it appears to indicate no issue and all is ok, but nothing is actually replicating from 1 to 2.
when i run dfsrsdiag backlog on either server says there's nothing in backlog. I have a feeling it might have never worked since the initail copy, but found another utility which shows me the below, what does this mean? replciation should be one way server1
to server2
UPDATE:
Dfsradmin Membership List /RGname:Rep_group_namef/attr:MemName,RFName,IsPrimary
Both servers show No to Primary, is this absolutely required? as other servsr with DFS shares have this option of no for all mebers but they are replicating OK

Hi,
If initial replicaiton is finished, it is common that there is no primary server.
Here are the steps to clear database and redo the initial replication. You could first test the step 8 only to see if it could help. If not then try the clear database steps.
1.       Stop and ALSO disable the DFSR service on <ServerA> server (don't just simply stop it)
2.       In Windows Explorer open the specific drive
3.       Right click on the "System Volume Information" directory and select Properties\Security
Note: You might need to select the option for "Show hidden files, folders or drives" and also uncheck "Hide protected operating system files" in the folders view options to be able to even see the "System Volume Information" directory.
4.       Grant your user account that you're logged in with (if a member of Administrators group this will also suffice) "Full Control" to the "System Volume Information" directory.
Note: You may get an error on setting security on some files - this is expected.
5.       Open an elevated/Administrative command prompt. Switch to the "<drive letter>:\System Volume Information" directory
6.       Type the command "rmdir DFSR /s"
7.       Enable and re-start the DFSR service on <ServerA> server
8.       We will then set the <ServerA> server as the Primary member with dfsradmin.exe utility –
Dfsradmin Membership Set /RGName:<RG Name> /RFName:<RF Name> /MemName:<Member Name> /IsPrimary:True
Note: Files will be replicated from ServerA to all other targets. So if there is any newer file on other target servers, backup before starting replication.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

AD Replication Not Working - Last error: 1256 (0x4e8):

Hi,
We have one DC and ADC which is running on the same premises. Few days back the ADC got power failure and after that long it thrown an error of some services are not started. We checked the event viewer to find out the service failed but not
found the same. In Services all the services are in started mode. Restarted server serval time. Still the replication not happening with DC. If any one can help me out to find out the real issue will very helpful.
Pasting Below dciag and showrepl results ,
repadmin running command /showrepl against server localhost
Default-First-Site-Name\BACKUPDC
DC Options: (none)
Site Options: (none)
DC object GUID: bcbf105f-e755-4c24-b846-01d447834480
DC invocationID: da4dec2a-3c22-4b5f-8f36-586ee3969ea2
==== INBOUND NEIGHBORS ======================================
DC=bannaridc,DC=com
Default-First-Site-Name\DC via RPC
DC object GUID: 2a328743-72f5-48c7-b932-cbe8f957a580
Last attempt @ 2014-06-30 12:28:05 failed, result 5 (0x5):
Access is denied.
1479 consecutive failure(s).
Last success @ 2014-05-12 09:42:25.
CN=Configuration,DC=bannaridc,DC=com
Default-First-Site-Name\DC via RPC
DC object GUID: 2a328743-72f5-48c7-b932-cbe8f957a580
Last attempt @ 2014-06-30 12:28:06 failed, result 5 (0x5):
Access is denied.
1182 consecutive failure(s).
Last success @ 2014-05-12 09:23:26.
CN=Schema,CN=Configuration,DC=bannaridc,DC=com
Default-First-Site-Name\DC via RPC
DC object GUID: 2a328743-72f5-48c7-b932-cbe8f957a580
Last attempt @ 2014-06-30 12:28:06 failed, result 5 (0x5):
Access is denied.
1182 consecutive failure(s).
Last success @ 2014-05-12 09:23:26.
DC=DomainDnsZones,DC=bannaridc,DC=com
Default-First-Site-Name\DC via RPC
DC object GUID: 2a328743-72f5-48c7-b932-cbe8f957a580
Last attempt @ 2014-06-30 12:28:05 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
1182 consecutive failure(s).
Last success @ 2014-05-12 09:33:40.
DC=ForestDnsZones,DC=bannaridc,DC=com
Default-First-Site-Name\DC via RPC
DC object GUID: 2a328743-72f5-48c7-b932-cbe8f957a580
Last attempt @ 2014-06-30 12:28:05 failed, result 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
1182 consecutive failure(s).
Last success @ 2014-05-12 09:23:27.
Source: Default-First-Site-Name\DC
******* 1479 CONSECUTIVE FAILURES since 2014-05-12 09:42:25
Last error: 1256 (0x4e8):
The remote system is not available. For information about network troubleshooting, see Windows Help.
Replication Summary Start Time: 2014-06-30 12:49:41
Beginning data collection for replication summary, this may take awhile:
Source DC largest delta fails/total %% error
BACKUPDC 49d.03h:30m:38s 5 / 5 100 (2148074274) The target principal name is incorrect.
DC 49d.03h:26m:15s 5 / 5 100 (5) Access is denied.
Destination DC largest delta fails/total %% error
BACKUPDC 49d.03h:26m:16s 5 / 5 100 (5) Access is denied.
DC 49d.03h:30m:39s 5 / 5 100 (2148074274) The target principal name is incorrect.
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\BACKUPDC
Starting test: Connectivity
......................... BACKUPDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\BACKUPDC
Starting test: Replications
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=ForestDnsZones,DC=bannaridc,DC=com
The replication generated an error (1256):
The remote system is not available. For information about network troubleshooting, see Windows Help.
The failure occurred at 2014-06-30 11:28:05.
The last success occurred at 2014-05-12 09:23:27.
1181 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=DomainDnsZones,DC=bannaridc,DC=com
The replication generated an error (1256):
The remote system is not available. For information about network troubleshooting, see Windows Help.
The failure occurred at 2014-06-30 11:28:05.
The last success occurred at 2014-05-12 09:33:40.
1181 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: CN=Schema,CN=Configuration,DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-06-30 11:28:05.
The last success occurred at 2014-05-12 09:23:26.
1181 failures have occurred since the last success.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: CN=Configuration,DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-06-30 11:28:05.
The last success occurred at 2014-05-12 09:23:26.
1181 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-06-30 11:28:05.
The last success occurred at 2014-05-12 09:42:25.
1477 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
REPLICATION-RECEIVED LATENCY WARNING
BACKUPDC: Current time is 2014-06-30 12:20:45.
DC=ForestDnsZones,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:27.
DC=DomainDnsZones,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:33:40.
CN=Schema,CN=Configuration,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:26.
CN=Configuration,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:26.
DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:42:25.
......................... BACKUPDC passed test Replications
Starting test: NCSecDesc
......................... BACKUPDC passed test NCSecDesc
Starting test: NetLogons
......................... BACKUPDC passed test NetLogons
Starting test: Advertising
......................... BACKUPDC passed test Advertising
Starting test: KnowsOfRoleHolders
......................... BACKUPDC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... BACKUPDC passed test RidManager
Starting test: MachineAccount
......................... BACKUPDC passed test MachineAccount
Starting test: Services
......................... BACKUPDC passed test Services
Starting test: ObjectsReplicated
......................... BACKUPDC passed test ObjectsReplicated
Starting test: frssysvol
......................... BACKUPDC passed test frssysvol
Starting test: frsevent
......................... BACKUPDC passed test frsevent
Starting test: kccevent
......................... BACKUPDC passed test kccevent
Starting test: systemlog
......................... BACKUPDC passed test systemlog
Starting test: VerifyReferences
......................... BACKUPDC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : bannaridc
Starting test: CrossRefValidation
......................... bannaridc passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... bannaridc passed test CheckSDRefDom
Running enterprise tests on : bannaridc.com
Starting test: Intersite
......................... bannaridc.com passed test Intersite
Starting test: FsmoCheck
......................... bannaridc.com passed test FsmoCheck
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC
Starting test: Connectivity
......................... DC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC
DNS Tests are running and not hung. Please wait a few minutes...
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : bannaridc
Running enterprise tests on : bannaridc.com
Starting test: DNS
......................... bannaridc.com passed test DNS

Hello,
BEFORE doing any kind of restore!!!
Please arrange ip settings on the DCs as:
Windows IP Configuration
Host Name . . . . . . . . . . . . : backupdc
Primary Dns Suffix . . . . . . . : bannaridc.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : bannaridc.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #2
Physical Address. . . . . . . . . : 00-1A-64-D4-AF-AC
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 172.16.4.11
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 172.16.4.5
DNS Servers . . . . . . . . . . . : 172.16.4.1
172.16.4.11 Primary WINS Server . . . . . . . : 172.16.4.11
AND
Host Name . . . . . . . . . . . . : DC
Primary Dns Suffix . . . . . . . : bannaridc.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : bannaridc.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #2
Physical Address. . . . . . . . . : 00-1A-64-25-A0-6A
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 172.16.4.1
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 172.16.4.5
DNS Servers . . . . . . . . . . . : 172.16.4.1
172.16.4.11
Primary WINS Server . . . . . . . : 172.16.4.11
After the changes reboot "backupDC" and after that run ipconfig /flushdns and ipconfig /registerdns and restart the netlogon service on "DC".
Now let it run some hours and then provide the following output files via SkyDrive:
ipconfig /all >c:\ipconfig.log [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
ADREPLSTATUS
http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
As the output will become large, DON'T post them into the thread, please use Windows OneDrive (onedrive.live.com) [with open access!] and add the link from it here. Also the /e in dcdiag
scans the complete forest, so better run it on COB.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

ECC-GTS : Partner-Customer is not transferring from ECC to GTS

Dear All,
I have created a Customer in SAP ECC system and using Initial transfer of customer to GTS system . I got the below success message .
But, when I go and check the existence of the same Partner in GTS system , I did not find any associated Business partner record for this customer .
I have check transfer log in sap gts under "System Monitoring Tab" but I did not find any error log for this customer .
Can you please help me in this regard by suggesting any other areas where I need to check to find out the solution .
" All selected partners (1) have been processed successfully
Message no. /SAPSLL/PLUGINR3113 "
Vinayaka

Hi Vinayaka,
Are you definitely checking the correct GTS system? You can run report /SAPSLL/PLUGIN_CHECK_R3 in your feeder system to check that the maintained Logical Target System for GTS.
In GTS, Check the BP transfer in transaction SLG1 for any error messages at the time of transfer.
When checking in transaction BP, are you selecting "External Number" when searching with the feeder system partner number.
Can you check in table /SAPSLL/PNTBP for the mapping between the feeder system BP no. and the GTS no. (field BPVSY relates to external no. ie feeder system. no.) and also check if an entry exists in BUT000.
Kind Regards
Ann Marie

Reservations creation with customer fields in ECC from SRM does not work?

Hi,
I have to create reservations into backend system (ECC) from shopping cart creation in SRM 7.0.
Reservation items contiain two customer fields.
RESB is extended by adding an append structure that contains an include with the data structure of the two customer-specific fields.
When reservation is created by BAPI_RESERVATION_CREATE1 function in ECC customer fields are filled.
In SRM I use FILL_RS_INTERFACE1 method of BADI BBP_CREATE_BE_RS_NEW.
When a shopping cart is created in SRM and then approved a reservation is created in ECC but customer fields are empty.
Why?
Thank you for your collaboration.
Best regards.
Al

http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90bd6f78-bcce-2a10-17ac-a74187b924ea?quicklink=index&overridelayout=true
Note 885458 - SRM partner maintenance: 'Add to invoicing party' is missing
Note 1034662 - BBP_VENDOR_SYNC: Invoicing Party not getting changed
in classic there may not be any issue since while creating a PO partner function automatically determined correctly int he ECC purchase order .
In SRM , we might pulled only VN vendors.
this could be one of the grey area in SRM Extended classic mode.
check with SAP and update SAP comments / suggection here.
Are PI (invoice party) and VN ( real supplier) vendor number ranges same?
Are many vendor VN and PI different?
Note 1022311 - SRM Integration: Partner at purchase order item level
In Supplier Relationship Management (SRM), you can maintain partners at item level. During the replication into the ECC back end, this partner information is no longer available because there are no partners for the document item in the ECC back end.
Other terms
Business Add-Ins:
ME_BAPI_PO_CUST, ME_PROCESS_PO_CUST, ME_GUI_PO_CUST, MB_MIGO_BADI, MRM_PARTNER_CHECK
let us wait for others reply
Muthu

In memory replication not working

We are using Weblogic 4.5.1 SP5 (I know that is an old service pack -
          but this is in a production system and it usually takes a guarantee that
          a change will fix a bug before being allowed).
          We are clustering two weblogic servers.
          In our test systems everything works great.
          In our production systems, failover works, but not in memory
          replication. With the replication debugging output turned on I see the
          following output:
          <WebLogicServer> WebLogic Server started
          <RJVM> Creating connection to 10.100.35.90/10.100.35.80 ...
          (I should point out that this RJVM message only appears on one of the
          servers, appears whether or not the other server is running, and
          10.100.35.80 is not the IP address of the other server nor of this
          server.)
          (Note, it never prints the typical <RepMan>Adding XXXXXX to the cluster)
          When a user connects and a session is created, we see the following:
          <RepMan>Unable to create secondary for XXXXXXX
          <RepMan>Registered XXXXXX
          <RepMan>Get Secondary JVMID returning null for XXXXXXX
          <RepMan>updateSecondary called on unpaired primary
          <RepMan>lookup found for XXXXXX
          The second server never outputs any new information.
          It's not the code, this works in test, and we have poured over the
          configuration, and all configuration files look correct.
          The MulticastTest also works in the production system.
          Any ideas?


          Looks like they are not in cluster..
          double check the configuration and check in weblogic console whether you see both servers under the cluster name...
          Robert Antonucci <[email protected]> wrote:
          >We are using Weblogic 4.5.1 SP5 (I know that is an old service pack -
          >but this is in a production system and it usually takes a guarantee that
          >a change will fix a bug before being allowed).
          >
          >We are clustering two weblogic servers.
          >In our test systems everything works great.
          >In our production systems, failover works, but not in memory
          >replication. With the replication debugging output turned on I see the
          >following output:
          >
          ><WebLogicServer> WebLogic Server started
          ><RJVM> Creating connection to 10.100.35.90/10.100.35.80 ...
          >(I should point out that this RJVM message only appears on one of the
          >servers, appears whether or not the other server is running, and
          >10.100.35.80 is not the IP address of the other server nor of this
          >server.)
          >(Note, it never prints the typical <RepMan>Adding XXXXXX to the cluster)
          >
          >When a user connects and a session is created, we see the following:
          >
          ><RepMan>Unable to create secondary for XXXXXXX
          ><RepMan>Registered XXXXXX
          ><RepMan>Get Secondary JVMID returning null for XXXXXXX
          ><RepMan>updateSecondary called on unpaired primary
          ><RepMan>lookup found for XXXXXX
          >
          >The second server never outputs any new information.
          >
          >It's not the code, this works in test, and we have poured over the
          >configuration, and all configuration files look correct.
          >The MulticastTest also works in the production system.
          >
          >Any ideas?
          >

ECC-GTS : Partner Replication not Working

Similar Messages

Maybe you are looking for